Search Results (87)

Essential oils (EO) have been used for skin treatments for centuries due to their wide range of beneficial pharmacological properties. Their adsorption in solids with confined spaces can be an excellent support for their slow delivery. Geraniol and linalool are octadienol isomers, often found in many natural EO. Both possess interesting therapeutic properties that can be optimized for protecting them from degradation using adsorption systems and controlled delivery. Cyclodextrins (CDs) and natural clay minerals are excellent materials to serve as hosts for drugs. In this work we investigate the adsorption and desorption of these essential oil components with both hosts, β-CD and montmorillonite (MNT). Molecular modeling studies were conducted using the INTERFACE force field (FF), yielding promising results, by reproducing the experimental crystal lattice cell parameters of the β-CD-geraniol and β-CD-linalool crystallized complexes within 5%, thereby validating this FF. The adsorption of these drugs onto β-CD rings is energetically more favorable than into MNT at low EO concentrations. However, the delivery of these drugs is more favorable from the clay mineral than from β-CD. At high EO concentrations, intercalation into MNT is energetically favorable. The behavior of both isomers is similar. Surprisingly the intercalation of β-CD-geraniol and β-CD-linalool into MNT is energetically favorable, predicting a complex and hybrid composite for intercalation. These natural composites can be suitable as additives in therapeutic skin treatments. Full article

To mitigate the attenuation of color-change sensitivity in cholesteric liquid crystals (CLCs) post-microencapsulation, this study developed MXene-reinforced thermochromic textiles. Monolayer/few-layer MXene nanosheets were fabricated via an etching-intercalation-dispersion approach, while cholesteric liquid crystal microcapsules (CLCMs) were synthesized through a solvent evaporation method. Cotton fabrics were pretreated with polydopamine (PDA), followed by the fabrication of poly(diallyldimethylammonium chloride) (PDAC)/MXene composite coatings via layer-by-layer (LbL) self-assembly and subsequent hydrophobic modification. Systematic characterizations (scanning electron microscopy, SEM; atomic force microscopy, AFM) and performance evaluations revealed that MXene nanosheets have an average thickness of 1.54 nm, while CLCMs display a uniform spherical morphology. The resultant textiles exhibit a reversible red-green-blue color transition over the temperature range of 26.5–29.5 °C, with sensitivity comparable to pristine CLCs and excellent hydrophobicity. This work overcomes the long-standing bottleneck of inadequate color-change sensitivity in conventional liquid crystal microcapsule textiles, offering a novel strategy for the advancement of smart wearable color-changing materials. Full article

Transition metal carbides/nitrides (MXenes) nanosheets have emerged as promising candidates for constructing high-performance nanofiltration (NF) membranes for separation processes. However, MXene membranes exhibit limited feasibility due to the instability of their microstructure, which can lead to failure in the filtration process. This study presents a bridging strategy (polyethyleneimine and polydopamine) to prepare a stable titanium carbide (Ti₃C₂) membrane, resulting in superior nanofiltration efficiency. Polyethyleneimine intercalation can inhibit the tendency to swell, while polydopamine enhances the force between the substrate and nanosheets. The optimized membrane possesses a permeate flux of 112.3 L m⁻² h⁻¹ bar⁻¹ (1.6 times higher than pristine Ti₃C₂ membrane) and good selectivity (methyl blue rejection rate: ~99.5%; Na₂SO₄ rejection rate: <5.0%). In addition, the prepared membrane has good long-time durability and is more suitable for low pressure nanofiltration. Notably, the bridging strategy is also applicable to various two-dimensional lamellar membranes. This strategy provides a universal method for enhancing the stability of two-dimensional membranes, thereby promoting their practical applications in robust separation processes. Full article

Hexagonal boron nitride (h-BN) possesses a unique combination of a wide bandgap, high thermal conductivity, and chemical inertness, making it a key insulating and thermal management material for advanced electronics and nanocomposites. However, its intrinsic hydrophobicity and strong interlayer van der Waals forces severely limit exfoliation efficiency and dispersion stability, particularly in scalable liquid-phase processes. Here, we report a synergistic exfoliation strategy that integrates acid-induced hydroxylation with gallium (Ga) intercalation to achieve high-yield (>80%) production of ultrathin (<4 nm) hydrophilic h-BN nanosheets. Hydroxylation introduces abundant -OH groups, expanding interlayer spacing and significantly increasing surface polarity, while Ga intercalation leverages its native Ga₂O₃ shell to form strong interfacial interactions with hydroxylated basal planes. This oxide-mediated adhesion facilitates efficient layer separation under mild sonication, yielding nanosheets with well-preserved lateral dimensions and exceptional dispersion stability in polar solvents. Comprehensive characterization confirms the sequential chemical and structural modifications, revealing the crucial roles of hydroxylation-induced activation and Ga₂O₃ assisted wettability enhancement. This combined chemical activation–soft metallic intercalation approach provides a scalable, solution-processable route to high-quality h-BN nanosheets, opening new opportunities for their integration into dielectric, thermal interface, and multifunctional composite systems. Full article

Transmembrane protein 43 (TMEM43 or LUMA) encodes a highly conserved protein found in the nuclear and endoplasmic reticulum membranes of many cell types and the intercalated discs and adherens junctions of cardiac myocytes. TMEM43 is involved in facilitating intra/extracellular signal transduction to the nucleus via the linker of the nucleoskeleton and cytoskeleton complex. Genetic mutations may result in reduced TMEM43 expression and altered TMEM43 protein cellular localization, resulting in impaired cell polarization, intracellular force transmission, and cell–cell connections. The p.S358L mutation causes arrhythmogenic right ventricular cardiomyopathy type-5 and is associated with increased absorption of lipids, fatty acids, and cholesterol in the mouse small intestine, which may promote fibro-fatty replacement of cardiac myocytes. Mutations (p.E85K and p.I91V) have been identified in patients with Emery–Dreifuss Muscular Dystrophy-related myopathies. Other mutations also lead to auditory neuropathy spectrum disorder-associated hearing loss and have a negative association with cancer progression and tumor cell survival. This review explores the pathogenesis of TMEM43 mutation-associated diseases in humans, highlighting animal and in vitro studies that describe the molecular details of disease processes and clinical, histologic, and molecular manifestations. Additionally, we discuss TMEM43 expression-related conditions and how each disease may progress to severe and life-threatening states. Full article

The cointercalation of solvated Mg²⁺ ions into graphite has typically been considered challenging because of concerns regarding the instability of the electrolyte and the potential for structural degradation. However, recent developments in electrolyte design suggest that this process may be reversible under appropriate conditions. In this study, the interfacial behavior of graphite in a magnesium-ion system was investigated using in situ electrochemical atomic force microscopy. Electrochemical tests in a triglyme-based electrolyte revealed a reversible capacity of 158 mAh g⁻¹, attributed to the insertion of triglyme-solvated Mg²⁺ ions. Real-time surface imaging of highly oriented pyrolytic graphite revealed the formation of a passivating surface film during the initial cycle, along with nanoscale hill-like (~1 nm) and blister-like (~5 nm) structures, which were partially reversible and showed good correlation with the redox peaks observed in the cyclic voltammetry experiments, suggesting that the surface film enables Mg²⁺ transport while mitigating electrolyte decomposition. These findings demonstrate that stable co-intercalation of solvated Mg²⁺ ions is achievable in the early cycles in graphite and highlight the importance of interfacial engineering and solvation structures in the development of magnesium-ion batteries. Full article

The possibility of reinforcing polymeric matrices with multifunctional fillers for improving structural and functional properties is widely exploited. The compatibility between the filler and the polymeric matrix is crucial, especially for high filler content. In this paper, polymeric matrices of Nylon 6,6 with pyrene chains were successfully synthesized to improve the compatibility with carbonaceous fillers. The compatibility was proven using graphite as a carbonaceous filler. The different properties, including thermal stability, crystallinity, morphology, and local mechanical properties, have been evaluated for various filler contents, and the results have been compared to those of synthetic Nylon 6,6 without pyrene chain terminals. XRD results highlighted that the compatibilization of the composite matrix may lead to an intercalation of the polymeric chains among the graphite layers. This phenomenon leads to the protection of the polymer from thermal degradation, as highlighted by the thermogravimetric analysis (i.e., for a filler content of 20%, the beginning degradation temperature goes from 357 °C for the non-compatibilized matrix to 401 °C for the compatibilized one and the residual at 750 °C goes from 33% to 67%, respectively. A significant improvement in the interphase properties, as proven via Atomic Force Microscopy in Harmonix mode, leads to a considerable increase in local mechanical modulus values. Specifically, the compatibilization of the matrix hosting the graphite leads to a less pronounced difference in modulus values, with more frequent reinforcements that are quantitatively similar along the sample surface. This results from a significantly improved filler distribution with respect to the composite with the non-compatibilized matrix. The present study shows how the thermoplastic/filler compatibilization can sensitively enhance thermal and mechanical properties of the thermoplastic composite, widening its potential use for various high-performance applications, such as in the transport field, e.g., for automotive components (engine parts, gears, bushings, washers), and electrical and electronics applications (heat sinks, casing for electronic devices, and insulating materials). Full article

Background: The biomechanical properties of ocular tissues are critical to physiological processes that span ocular development, aging, and disease. The structural integrity of these tissues is important in mediating how the eye responds to strain and stress that pose challenges to physiological homeostasis. In the posterior segment, the peripapillary sclera and lamina separate the intraocular chamber and the fluid-filled subarachnoid space. Degradation of each contribute to pathogenic progression in multiple conditions and are largely determined by the integrity and architecture of collagen fibers, especially type I collagen. Methods: We used atomic force microscopy to measure how stress induced by elevations in intraocular pressure impacts stiffness of the peripapillary sclera and glial lamina in the rat eye and whether changes in stiffness could be influenced by topical treatment of a reparative mimetic of type I collagen. Results: Four weeks of elevated intraocular pressure reduced Young’s modulus in peripapillary sclera and glial lamina, coincident with reduced anterograde transport along the optic projection to the brain. Reduction in tissue stiffness correlated with an increase in fragmented collagen. Topical application of collagen mimetic peptide during the period of elevation countered both. Conclusions: Collagen remodeling occurs in many ocular conditions that influence the peripapillary sclera and glial lamina, including glaucoma and myopia. Our results suggest that topical application of collagen mimetic peptides that intercalate with and repair collagen damaged by disease processes could serve to mitigate changes in tissue stiffness and integrity due to degraded collagen. Full article

Lepidolite is one of a small number of minerals that contains a significant amount of lithium. Some areas, like the Apuseni and Metalifer Mountains in Romania, present dark red layers intercalated with reddish-yellow clay soils with interesting aspects. X-ray diffraction (XRD) analysis coupled with polarized light optical microscopy (POM) revealed that this dark red soil contains a large amount of fine microstructured lepidolite (24–35%) mixed with quartz sand and fine traces of kaolinite and muscovite. Scanning electron microscopy (SEM) elemental analysis revealed a typical clay composition with Mn traces (specific to red lepidolite), confirming POM observation. SEM also revealed fine tabular platelets of lepidolite with a maximum size of 1.5 µm surrounding quartz particles (5–50 µm), indicating the presence of numerous nano fractions. Their presence was confirmed by atomic force microscopy (AFM), which showed particle sizes ranging from 40 to 60 nm, closely matching the crystallite size estimated using the Scherrer formula. The finest fraction allows easy separation from the quartz sand through bi-distilled water washing. Quartz particles settle at the bottom of the container, while the finest lepidolite particles are easily separated. Water evaporation ensures their recovery. Thus, the enriched lepidolite powder could be utilized for specific applications in the lithium industry. On the other hand, the large number of the finest particles found in the samples investigated presents the risk of PM1, PM2.5m, and PM10 emission, with impacts on atmospheric environmental safety. Full article

The integration of two-dimensional (2D) nanomaterials into polymer-based packaging presents a promising avenue for sustainable, high-performance materials. This perspective explores the roles of colloidal interactions in the assembly of 2D materials into thin films for packaging applications. We begin by analyzing the types of colloidal forces present in 2D nanomaterials and their impact on dispersion and stability. We then explore how these colloidal forces can be modulated through chemical structure, ionic intercalation, and shear forces, influencing the stacking behavior and orientation of 2D materials within the films. The incorporation of these 2D materials into polymer-based packaging systems is also considered, with a focus on how surface functionalization and dispersion techniques enhance their interaction with the polymer matrix to improve barrier properties against gases and moisture, increase mechanical strength, and impart antimicrobial effects. This work underscores the critical role of colloidal interactions in optimizing the design and performance of 2D-nanomaterial-based packaging for sustainable development. Full article

The transition metal dichalcogenide (TMDC) NbSe₂ is a highly conductive and superconducting material with great potential for next-generation electronic and optoelectronic devices. However, its bulk form suffers from reduced charge density and conductivity due to interlayer van der Waals interactions. To address this, we exfoliated NbSe₂ into nanosheets using lithium-ion intercalation and utilized them as diaphragms in acoustic transducers. Conventional electromagnetic and electrostatic mechanisms have limitations in sound pressure level (SPL) performance at high and low frequencies, respectively. To overcome this, we developed a hybrid force mechanism combining the strengths of both approaches. The NbSe₂ nanosheets were successfully prepared and analyzed, and the NbSe₂-based hybrid acoustic transducer (N-HAT) demonstrated significantly improved SPL performance across a wide frequency range. This study offers a novel approach for designing high-performance acoustic devices by harnessing the unique properties of NbSe₂. Full article

Carbon nanostructures are highly promising materials for applications in a variety of different fields. Besides their interesting performances, the possibility to synthesize them from biowaste makes them an eco-friendly resource widely exploitable within a circular economy context. The present work deals with the green, one-pot synthesis of graphene quantum dots (GQDs) from carbon aerogels (CAs) derived from rice husk (RH). After having obtained CAs upon purification of RH, followed by gelification and carbonization of the resulting cellulose, the one-pot solventless production of GQDs was obtained by ball milling. This method determined the formation of crystalline nanostructures with a diameter of around 20 nm, which were analyzed via scanning electron microscopy, transmission electron microscopy, atomic force microscopy, X-ray diffraction, and Raman spectroscopy to obtain a full morphological and structural characterization. GQDs were used as electrode materials for supercapacitors and Li-ion batteries, showing the ability to both accumulate charges over the surface and intercalate lithium-ions. The reported results are a proof of principle of the possibility of exploiting GQDs as support material for the development of advanced systems for energy storage. Full article

Forced intercalation peptide nucleic acids (FIT-PNAs) are DNA mimics that act as RNA sensors. The sensing event occurs due to sequence-specific RNA hybridization, leading to a substantial increase in fluorescence. The fluorophore in the FIT-PNA is termed a surrogate base. This molecule typically replaces a purine in the PNA sequence. BisQ is a surrogate base that connects two quinolines via a monomethine bond. BisQ-based FIT-PNAs have excellent biophysical features that include high brightness and red-shifted emission (λ_{em, max} = 613 nm). In this report, we detail two chemical approaches that allow for the facile synthesis of the BisQ PNA monomer. In both cases, the key compound used for the synthesis of BisQ-CH₂COOH is the tBu-ester-modified quinoline synthon (compound 5). Subsequently, one method uses the Alloc acid-protected PNA backbone, whereas the other uses the tBu ester-protected PNA backbone. In the latter case, the overall yield for BisQ acid (compound 7) and BisQ PNA monomer syntheses was 61% in six synthetic steps. This is a substantial improvement to the published procedures to date (7% total yield). Lastly, we have prepared an 11-mer FIT-PNA with either BisQ or thiazole orange (TO) and studied their photophysical properties. We find superior photophysical properties for the BisQ FIT-PNA in terms of the brightness and selectivity, highlighting the added value of using this surrogate base for RNA sensing. Full article

Exfoliated graphite (ExG) embedded in a polymeric matrix represents an accessible, cost-effective, and sustainable method for generating nanosized graphite-based polymer composites with multifunctional properties. This review article analyzes diverse methods currently used to exfoliate graphite into graphite nanoplatelets, few-layer graphene, and polymer-assisted graphene. It also explores engineered methods for small-scale pilot production of polymer nanocomposites. It highlights the chemistry involved during the graphite intercalation and exfoliation process, particularly emphasizing the interfacial interactions related to steric repulsion forces, van der Waals forces, hydrogen bonds, π-π stacking, and covalent bonds. These interactions promote the dispersion and stabilization of the graphite derivative structures in polymeric matrices. Finally, it compares the enhanced properties of nanocomposites, such as increased thermal and electrical conductivity and electromagnetic interference (EMI) shielding applications, with those of neat polymer materials. Full article

The green and environmentally friendly cardanol epoxy resin has a bright application prospect, but its insufficient thermal/mechanical properties seriously hinder its application. Adding nanoclay to polymer matrix is an effective method to enhance the thermal/mechanical properties of material, but the dispersion and compatibility of nanoclay in epoxy resin remain to be solved. In this work, active Girard’s reagent clay (PG-clay) and non-active Girard’s reagent clay (NG-clay) were prepared by using acethydrazide trimethylammonium chloride (Girard’s reagent) as the modifier, and cardanol epoxy resin/G-clay nanocomposites were synthesized by the “clay slurry composite method”. The results showed that both PG-clay and NG-clay were dispersed in the epoxy matrix in the form of random exfoliation/intercalation, which effectively improved the thermal/mechanical properties of the composites. Tg of the cardanol epoxy resin has raised from 19.8 °C to 38.1 °C (4 wt.% PG-clay). When the mass fraction of clay is 4%, the tensile strength of the non-reactive NG-clay increases by 128%, and the elongation at break also increases by 101%. Simultaneously, the active PG-clay can participate in the curing reaction of epoxy resin due to the amino group, forming a chemical bond between the clay layer and the resin matrix and establishing a strong interfacial force. The tensile strength of the composite is increased by 970%, and the elongation at break is also increased by 428%. This research demonstrates that the cardanol epoxy resin/G-clay nanocomposite stands as a highly promising candidate for bio-based epoxy resin materials. Full article