Search Results (351)

Organ functions generally decline with age, but the ovary is a prototypical organ that undergoes functional loss over time. Autophagy plays a crucial role in maintaining organ homeostasis, and age-related upregulation of the autophagy inhibitor protein, Rubicon, has been linked to cellular and tissue dysfunction. This review describes how granulosa cell autophagy supports follicular growth and oocyte selection and maturation by regulating cellular energy metabolism and protein quality control. We then introduce the role of selective autophagy, including mitophagy or lipophagy, in steroidogenesis and cellular remodeling during luteinization. In aged ovaries, Rubicon accumulation suppresses autophagic flux, leading to diminished oxidative-stress resilience and enhanced DNA damage. Moreover, impaired autophagy drives the accumulation of ATP citrate lyase, which correlates with poor oocyte quality and reduced ovarian reserve. Following fertilization, oocytes further upregulate autophagy to provide the energy required for blastocyst transition. Conversely, in infertility-related disorders, such as premature ovarian insufficiency, endometriosis, and polycystic ovary syndrome, either deficient or excessive autophagy contributes to disease pathogenesis. Both autophagy inhibitors (e.g., Rubicon) and activators (e.g., Beclin1) could be emerging as promising biomarkers for assessing ovarian autophagy status. Therapeutically, Rubicon inhibition by trehalose in aged ovaries and autophagy suppression by agents such as hydroxychloroquine in polycystic ovary syndrome and endometriosis hold potential. Establishing robust methods to evaluate ovarian autophagy will be essential for translating these insights into targeted treatments. Full article

PVDF/TiO₂ composite membranes show some potential to be used for water treatment as they combine the advantages of polymers and ceramics. However, conventional PVDF-based composite membranes are always fabricated by using conventional toxic solvents. Herein, PolarClean was used as a green solvent to fabricate PVDF/TiO₂ composite membranes via the phase inversion method. In this process, Pluronic F127 was used as a dispersion agent to distribute TiO₂ particles in the PVDF matrix and to serve as a pore former on the membrane surface. TiO₂ particles were well distributed on the membrane surface and bulk. TiO₂ particles in the PVDF matrix enhanced the mechanical strength and hydrophilic characteristics of the resulting composite membrane, facilitating water transport through the composite membranes and enhancing their water permeability. Membrane microstructures and mechanical strength of the composite membranes were finely tuned by varying the PVDF concentration, TiO₂ concentration, and coagulation bath temperature. It was demonstrated that the resulting green PVDF/TiO₂ composite membrane showed a high water permeance compared with those using conventional toxic solvents in terms of its small pore size. In addition, the particle rejection of green PVDF/TiO₂ membrane showed a 99.9% rejection rate in all the filtration process, while those using NMP showed 91.1% after 30 min of filtration. The water flux was similar at 121 and 130 Lm⁻²h⁻¹ for green and conventional solvents, respectively. This work provides important information for the future application of sustainable membranes. Full article

The application of an ultrafiltration (UF) process with periodic membrane cleaning with the use of alkaline detergent solutions was proposed for the recovery of wash water from car wash effluent. In order to test the resistance of the membranes to the degradation caused by the cleaning solutions, a pilot plant study was carried out for almost two years. The installation included an industrial module with FP100 tubular membranes made of polyvinylidene fluoride (PVDF). The module was fed with synthetic effluent obtained by mixing foaming agents and hydrowax. To limit the fouling phenomenon, the membranes were cleaned cyclically with P3 Ultrasil 11 solution (pH = 11.7) or Insect solution (pH = 11.5). During plant shutdowns, the membrane module was maintained with a sodium metabisulphite solution. Changes in the permeate flux, turbidity, COD, and surfactant rejection were analysed during the study. Scanning electron microscopy (SEM), atomic force microscopy (AFM), differential scanning calorimetry (DSC), and Fourier-transform infrared spectroscopy (FTIR) analysis were used to determine the changes in the membrane structure. As a result of the repeated chemical cleaning, the pore size increased, resulting in a more than 50% increase in permeate flux. However, the quality of the recovered wash water did not deteriorate, as an additional separation layer was formed on the membrane surface due to the fouling phenomenon. Full article

Headwater streams serve as a crucial link between forest and downstream aquatic ecosystems and also act as crucial agents in carbon (C) and nutrient storage and flux. These aquatic systems play a pivotal role in regulating biogeochemical cycles. Plant litter is an important contributor of nutrients to headwater streams, having significant impacts on downstream ecosystems. However, current research predominantly focuses on the dynamics of plant litter C and nutrients such as nitrogen and phosphorus, and we know little about those of nutrients such as sodium (Na). In this study, we conducted a comprehensive evaluation of the annual dynamics of plant litter Na storage within a subtropical headwater stream. This study took place over a period of one year, from March 2021 to February 2022. Our results showed that (1) the average annual concentration and storage of litter Na was 538.6 mg/kg and 2957.6 mg/m², respectively, and litter Na storage exhibited a declining trend from stream source to mouth, while demonstrating significantly higher values during the rainy season compared to the dry season; (2) plant litter type had significant impacts on Na concentration and storage, with leaf, twig, and fine woody debris accounting for the majority of litter Na storage; and (3) hydrological (precipitation, discharge) and physicochemical (water temperature, flow velocity, pH, dissolved oxygen, alkalinity) factors jointly affected Na storage patterns. Overall, the results of this study clearly reveal the dynamic characteristics of Na storage in plant litter in a subtropical forest headwater stream, which contributes to a more comprehensive understanding of the role of headwater streams in nutrient cycling and the dynamic changes of nutrients along with hydrological processes. This research will enhance our predictive understanding of nutrient cycling at the watershed scale. Full article

Background: Renal injury is a critical health issue in pet dogs, often exacerbated by drug-induced nephrotoxicity such as gentamicin (GM). This study investigated the protective effects of ergosterol (Erg), a natural compound from edible mushrooms, against GM-induced damage in Madin–Darby canine kidney (MDCK) cells. Methods: MDCK cells were treated with GM (0.5–3 mmol/L) for 12 h to establish injury. Erg (1 to 32 μg/mL) was pretreated for 12 h before GM exposure (2 mmol/L). Cell viability, nitric oxide (NO), lactate dehydrogenase (LDH), oxidative stress markers (SOD, GSH, CAT, MDA), inflammatory cytokines (IL-1β, IL-6, TNF-α), renal function indicators (Scr, BUN), and autophagy/apoptosis-related proteins (ATG5, Beclin1, P62, BAX, BCL-2) were assessed via CCK-8, ELISA, fluorescence staining, and Western blot. Statistical significance (p < 0.05) was determined by ANOVA and LSD post hoc tests. Results: GM (2 mmol/L) significantly reduced cell viability (p < 0.01) and elevated NO and LDH levels (p < 0.01). Erg pretreatment (4–8 μg/mL) restored cell viability (p < 0.01), suppressed NO (p < 0.01) and LDH release (p < 0.01), and enhanced antioxidant enzyme activities (SOD, GSH, CAT; p < 0.01). Erg attenuated GM-induced reactive oxygen species (ROS) overproduction (p < 0.01) and decreased pro-inflammatory cytokines (IL-1β, IL-6, TNF-α; p < 0.01). Renal markers Scr and BUN were reduced (p < 0.01). Mechanistically, Erg upregulated autophagy proteins ATG5 and Beclin1 (p < 0.01), reduced P62 accumulation (p < 0.01), and lowered the BAX/BCL-2 ratio (p < 0.01). Conclusions: Erg protects MDCK cells from GM-induced nephrotoxicity by restoring autophagy flux, suppressing mitochondrial apoptosis, and mitigating oxidative stress and inflammation. These findings highlight Erg’s potential as a natural therapeutic agent for canine renal injury. Further in vivo studies are needed to validate its clinical efficacy. Full article

Rapid progress in lithium-ion batteries and AI-powered autonomous driving is poised to propel electric vehicles to a 50% share of the global automotive market by the year 2035. Today, there is a major focus on recycling electric vehicle motors, particularly on extracting rare earth elements (REEs) from NdFeB permanent magnets (PMs). This research is based on a single-furnace process concept designed to separate metal components within PM motors by exploiting the varying melting points of the constituent materials, simultaneously extracting REEs present within the PMs and transferring them into the slag phase. Thermodynamic modeling, via Factsage Equilib stream calculations, optimized the experimental process. Simulated materials substituted the PM motor, which optimized modeling-directed melting within an induction furnace. The 2FeO·SiO₂ fayalite flux can oxidize rare earth elements, resulting in slag. The neodymium oxidation reaction by fayalite exhibits a ΔG° of −427 kJ when subjected to an oxygen partial pressure ($P_{O_2}$) of 1.8 × 10⁻⁹, which is lower than that required for FeO decomposition. Concerning the FeO–SiO₂ system, neodymium, in Nd³⁺, exhibits a strong bonding with the ${\mathrm{S}\mathrm{i}\mathrm{O}}_4^{4^{-}}$ matrix, leading to its incorporation within the slag as the silicate compound, Nd₂Si₂O₇. When 30 wt.% fayalite flux was added, the resulting experiment yielded a neodymium extraction degree of 91%, showcasing the effectiveness of this fluxing agent in the extraction process. Full article

To facilitate power system decarbonization, optimizing clean energy integration has emerged as a critical pathway for establishing sustainable power infrastructure. This study addresses the multi-timescale operational challenges inherent in power networks with high renewable penetration, proposing a novel stochastic dynamic programming framework that synergizes intraday microgrid dispatch with a multi-phase carbon cost calculation mechanism. A probabilistic carbon flux quantification model is developed, incorporating source–load carbon flow tracing and nonconvex carbon pricing dynamics to enhance environmental–economic co-optimization constraints. The spatiotemporally coupled multi-microgrid (MMG) coordination paradigm is reformulated as a continuous state-action Markov game process governed by stochastic differential Stackelberg game principles. A communication mechanism-enabled multi-agent twin-delayed deep deterministic policy gradient (CMMA-TD3) algorithm is implemented to achieve Pareto-optimal solutions through cyber–physical collaboration. Results of the measurements in the MMG containing three microgrids show that the proposed approach reduces operation costs by 61.59% and carbon emissions by 27.95% compared to the least effective benchmark solution. Full article

In an integrated gasification combined cycle (IGCC), a gasification process produces a gas stream from a solid fuel, such as coal or biomass. This gas (syngas or synthesis gas) resulting from the gasification process contains carbon monoxide, molecular hydrogen, and carbon dioxide (other gaseous components may also be present depending on the gasified solid fuel and the gasifying agent). Separating hydrogen from this syngas stream has advantages. One of the methods to separate hydrogen from syngas is selective permeation through a palladium-based metal membrane. This separation process is complicated as it depends nonlinearly on various variables. Thus, it is desirable to develop a simplified reduced-order model (ROM) that can rapidly estimate the separation performance under various operational conditions, as a preliminary stage of computer-aided engineering (CAE) in chemical processes and sustainable industrial operations. To fill this gap, we present here a proposed reduced-order model (ROM) procedure for a one-dimensional steady plug-flow reactor (PFR) and use it to investigate the performance of a membrane reactor (MR), for hydrogen separation from syngas that may be produced in an integrated gasification combined cycle (IGCC). In the proposed model, syngas (a feed stream) enters the membrane reactor from one side into a retentate zone, while nitrogen (a sweep stream) enters the membrane reactor from the opposite side into a neighbor permeate zone. The two zones are separated by permeable palladium membrane surfaces that are selectively permeable to hydrogen. After analyzing the hydrogen permeation profile in a base case (300 °C uniform temperature, 40 atm absolute retentate pressure, and 20 atm absolute permeate pressure), the temperature of the module, the retentate-side pressure, and the permeate-side pressure are varied individually and their influence on the permeation performance is investigated. In all the simulation cases, fixed targets of 95% hydrogen recovery and 40% mole-fraction of hydrogen at the permeate exit are demanded. The module length is allowed to change in order to satisfy these targets. Other dependent permeation-performance variables that are investigated include the logarithmic mean pressure-square-root difference, the hydrogen apparent permeance, and the efficiency factor of the hydrogen permeation. The contributions of our study are linked to the fields of membrane applications, hydrogen production, gasification, analytical modeling, and numerical analysis. In addition to the proposed reduced-order model for hydrogen separation, we present various linear and nonlinear regression models derived from the obtained results. This work gives general insights into hydrogen permeation via palladium membranes in a hydrogen membrane reactor (MR). For example, the temperature is the most effective factor to improve the permeation performance. Increasing the absolute retentate pressure from the base value of 40 atm to 120 atm results in a proportional gain in the permeated hydrogen mass flux, with about 0.05 kg/m².h gained per 1 atm increase in the retentate pressure, while decreasing the absolute permeate pressure from the base value of 20 bar to 0.2 bar causes the hydrogen mass flux to increase exponentially from 1.15 kg/m².h. to 5.11 kg/m².h. This study is linked with the United Nations Sustainable Development Goal (SDG) numbers 7, 9, 11, and 13. Full article

The 2025 EuDial Consensus systematically compared hemodiafiltration (HDF) to high-flux hemodialysis (HD), highlighting HDF’s superior removal of middle-molecular-weight uremic toxins, potential survival advantages, and immunomodulatory properties. High-Volume HDF (HVHDF), defined by a substitution volume exceeding 23 L per session, was associated with improved cardiovascular outcomes, reduced infection-related mortality, and decreased systemic inflammation. Background/Objectives: Nevertheless, the consensus refrains from endorsing HDF as the standard of care, citing insufficient evidence to prevent sudden cardiac death, reduce intradialytic hypotension, or significantly lower hospitalization rates compared to HD. Methods: This review critically evaluates the EuDial Consensus, highlighting its methodological strengths while noting potential limitations stemming from an exclusive reliance on randomized controlled trials (RCTs). The exclusion of real-world evidence (RWE) and mechanistic studies may have led to an underestimation of HDF’s broader clinical benefits, particularly in cardiovascular stability, inflammation control, and anemia management. Results: Multiple studies have demonstrated HDF’s capacity to enhance immune function, improve erythropoiesis, and increase the clearance of beta-2 microglobulin (β2M) and other pro-inflammatory toxins. Furthermore, the CONVINCE trial’s economic analysis supports HDF’s cost-effectiveness, especially when considering improved survival and reduced dependency on erythropoiesis-stimulating agents. Conclusions: Future research should integrate RWE and mechanistic insights to better define HDF’s therapeutic potential, particularly concerning anemia control, infection mitigation, and hemodynamic stability. While the EuDial Consensus provides valuable clinical guidance, its conclusions should be contextualized within a broader and evolving evidence base. Given its multidimensional benefits, post-dilution HVHDF is increasingly viewed as a preferred renal replacement therapy modality, warranting wider adoption in clinical practice. Full article

Familial Alzheimer’s disease (FAD) is a complex multifactorial disorder clinically characterized by cognitive impairment and memory loss. Pathologically, FAD is characterized by intracellular accumulation of the protein fragment Aβ42 (iAβ), hyperphosphorylated microtubule-associated protein TAU (p-TAU), and extensive degeneration of basal forebrain cholinergic neurons of the nucleus basalis of Meynert (NbM) and the medial septal nucleus (MSN), mainly caused by mutations in the amyloid precursor protein (APP), presenilin 1 (PSEN1), and PSEN2 gene. Since the dopaminergic system may contribute to FAD symptoms, alterations in the nigro-hippocampal pathway may be associated with cognitive impairment in FAD. Interestingly, p-α-synuclein (p-α-Syn), Aβ, and p-TAU have been found to coexist in vulnerable regions of postmortem AD brains. However, the mechanism by which Aβ, p-TAU, and α-Syn coexist in DAergic neurons in AD brains has not been determined. We generated PSEN1 I416T dopaminergic-like neurons (DALNs) from I416T menstrual stromal cells (MenSCs) in NeuroForsk 2.0 medium for 7 days and then cultured them in minimal culture medium (MCm) for another 4 days. On day 11, DALNs were analyzed for molecular and pathological markers by flow cytometry and fluorescence microscopy. We found that mutant DALNs showed increased accumulation of iAβ as well as increased phosphorylation of TAU at S202/T205 compared to WT DALNs. Thus, mutant DALNs exhibited typical pathological hallmarks of Alzheimer’s disease. Furthermore, PSEN1 I416T DALNs showed concomitant signs of OS as evidenced by the appearance of oxidized sensor protein DJ-1 (i.e., DJ-1C106-SO₃) and apoptotic markers TP53, pS63-c-JUN, PUMA, and cleavage caspase 3 (CC3). Notably, these DALNs exhibited PD-associated proteins such as intracellular accumulation of α-Syn (detected as aggregates of pS129-α-Syn) and phosphorylation of LRRK2 kinase at residue S935. In addition, mutant DALNs showed a 17.16- and 6.17-fold decrease in DA-induced Ca²⁺ flux, compared to WT DALNs. These observations suggest that iAβ and p-TAU, together with p-α-Syn, and p-LRRK2 kinase, may damage DAergic neurons and thereby contribute to the exacerbation of neuropathologic processes in FAD. Remarkably, the LRRK2 inhibitor PF-06447475 (PF-475) significantly reversed PSEN1 I416T-induced neuropathological markers in DAergic neurons. PF-465 inhibitor reduced iAβ, oxDJ-1C106-SO₃, and p-TAU. In addition, this inhibitor reduced pS935-LRRK2, pS129-αSYN, pS63-c-JUN, and CC3. We conclude that the observed neuroprotective effects of PF-475 are due to direct inhibition of LRRK2 activity and that the LRRK2 protein is upstream of the molecular cascade of apoptosis and proteinopathy. Our results suggest that PF-475 is an effective neuroprotective agent against endogenous PSEN1 I416T-induced neurotoxicity in DALNs coexisting with Parkinson’s disease markers. Therefore, PF-475 may be of great therapeutic value in FAD. Full article

Water pollution is a major environmental issue caused by the discharge of untreated or partially treated wastewater into rivers and oceans. Self-healing materials, which can repair localized damage, have become a promising approach to counter membrane performance decline from mechanical wear. However, ensuring stability and effectiveness in self-healing membranes remains a challenge. Polyvinyl alcohol (PVA) has been widely studied for its self-healing properties, while polyacrylic acid (PAA) is often used as a crosslinking agent due to its compatibility with PVA, especially in biomedical and filtration applications. In this study, a self-healing PVA-PAA coating was applied to a PES membrane. The PVA solution (5 wt%) was prepared by dissolving beads in distilled water and stirring at 80 °C for 6 h, while the PAA solution was diluted to match this concentration. The two solutions were mixed in a 3:1 molar ratio and heated to form a homogenous mixture, then coated onto PES membranes and crosslinked at 140 °C. Scanning electron microscopy (SEM) revealed a uniform, crack-free coating on the membrane surface. The mechanical properties of the membrane show a tensile strength of 4.85 MPa and elongation of 71.9%. Filtration tests showed that the PVA-PAA-coated PES membrane achieved a water flux of 36.16 L/m²h. The performance of the PVA-PAA coated PES membrane remained stable in terms of water flux and dye rejection after it healed, and the water flux was recorded at the range of 34.24 to 36.02 L/m²h after the seal healing. This self-healing PVA-PAA coated PES membrane demonstrates the practical potential for sustainable water treatment, offering reduced maintenance and extended lifespan for filtration systems. Full article

Lysosomal dysfunction has emerged as a central contributor to the pathogenesis of cardiovascular diseases (CVDs), particularly due to its involvement in chronic inflammation, lipid dysregulation, and oxidative stress. This review highlights the multifaceted roles of lysosomes in CVD pathophysiology, focusing on key mechanisms such as NLRP3 inflammasome activation, TFEB-mediated autophagy regulation, ferroptosis, and the role of apolipoprotein M (ApoM) in preserving lysosomal integrity. Additionally, we discuss how impaired lysosomal acidification, mediated by V-ATPase, contributes to lipid-induced cardiac dysfunction. Therapeutically, several pharmacological agents, such as statins, SGLT2 inhibitors, TRPML1 agonists, resveratrol, curcumin, and ferroptosis modulators (e.g., GLS1 activators and icariin), have demonstrated promise in restoring lysosomal function, enhancing autophagic flux, and reducing inflammatory and oxidative injury in both experimental models and early clinical settings. However, key challenges remain, including limitations in drug delivery systems, the absence of lysosome-specific biomarkers, and insufficient clinical validation of these strategies. Future research should prioritize the development of reliable diagnostic tools for lysosomal dysfunction, the optimization of targeted drug delivery, and large-scale clinical trials to validate therapeutic efficacy. Incorporating lysosome-modulating approaches into standard cardiovascular care may offer a new precision medicine paradigm for managing CVD progression. Full article

Methylparaben (MP) is an important member of the paraben family of aromatic compounds, which is under great demand in the industrial market as an antibacterial agent, preservative, and feed additive, and also has potential application value in the preparation of bio-based polyetherester materials. However, the current chemical production method of MP has various problems, such as serious environmental pollution, its dependence on petrochemical resources, and the generation of different types of waste. It is of great significance to develop an environmentally friendly MP synthesis method via synthetic biology. In this work, Saccharomyces cerevisiae was used as the host to construct the biosynthetic pathway of MP and various metabolic engineering strategies were applied to break the bottlenecks in the synthesis process, including the regulation of the rate-limiting steps in the endogenous shikimate pathway, the enhancement of central carbon flux via knocking out competitive pathways and promoting precursors synthesis, and the improvement of the exogenous enzyme expression using promoter engineering. The final engineered S. cerevisiae could produce 68.59 mg/L MP in shake flasks, which was the highest titer of MP synthesized by S. cerevisiae so far. It was indicated that the strategies applied in our work were effective in promoting the synthesis of MP, which not only laid an important foundation for the industrial production of MP, but also provided a platform for the synthesis of other aromatic compounds. Full article

Membrane technology is widely used in various aspects of wastewater treatment; however, single membrane technology has a series of disadvantages, such as high selectivity, poor recycling performance, and susceptibility to contamination. In this study, a treatment method combining an advanced oxidation process and membrane separation technology was proposed, and a geopolymer-based Fenton-like catalytic tubular membrane (GFM) was prepared by using H₂O₂ as a blowing agent by the direct foaming method. It was shown that the optimum conditions for the preparation of the membrane were a water glass modulus of 1.8 M, the addition of foaming agent of 1 mL, and a thickness of the membrane of 6.5 mm, with a flux of 6942 L·m⁻²·h⁻¹. Due to the characteristics of the tubular membrane, the possibility of adding hydrogen peroxide directly inside the membrane allows an optimal Fenton-like removal, which is better than outside the membrane, thus reducing the consumption of hydrogen peroxide. The tubular membrane has a multi-stage porous structure, high flux, and a high specific surface area (68.74 m²/g). The GFM/H₂O₂ Fenton-like system formed is capable of almost completely degrading all kinds of synthetic dyes under various stringent conditions, and the XRD, FTIR, and TG analyses and cycling tests showed that the GFM has excellent stability and a significant advantage in terms of reusability. Full article

3D-printing enables the fabrication of membranes with desired shapes and geometrical parameters. In this study, a membrane for pressure-driven processes was manufactured in a single step using the fused deposition modeling (FDM) technique. The membrane was produced from a mixture of polylactic acid (PLA) with sucrose as a pore-forming agent. Sucrose was removed from the final membrane by washing it with water. The membrane consists of three layers, and this sandwich-like structure ensures its mechanical stability. The material obtained was characterized using SEM and AFM imaging, as well as nitrogen adsorption-desorption and contact angle measurements. The porosity of each layer of the membrane is due to a loose region, which is coated on both sides with a dense film formed during printing. The pores responsible for rejection capability can be found in grooves between the polymer stripes in the dense layer. The membrane exhibits a water permeability of 64 L m⁻²h⁻¹bar⁻¹, with a molecular weight cut-off of 69 kDa. The PLA membrane can be used for polyphenol concentration, demonstrating a permeability of 2–3.4 L m⁻²h⁻¹bar⁻¹ and a selectivity towards these compounds of 78–98% at 0.5 bar, with a flux decline ratio of up to 50%. Full article