Search Results (42)

Effective energy management is vital for enhancing reliability, reducing operational costs, and supporting the increasing penetration of electric vehicles (EVs) and renewable energy sources (RESs) in distribution networks. This study presents a dynamic reconfiguration strategy for distribution feeders that integrates EV charging stations (EVCSs), RESs, and capacitors. The goal is to minimize both Energy Not Supplied (ENS) and operational costs, particularly under varying demand conditions caused by EV charging in grid-to-vehicle (G2V) and vehicle-to-grid (V2G) modes. To improve optimization accuracy and avoid local optima, an improved Whale Optimization Algorithm (IWOA) is employed, featuring a mutation mechanism based on Lévy flight. The model also incorporates uncertainties in electricity prices and consumer demand, as well as a demand response (DR) program, to enhance practical applicability. Simulation studies on a 95-bus test system show that the proposed approach reduces ENS by 16% and 20% in the absence and presence of distributed generation (DG) and EVCSs, respectively. Additionally, the operational cost is significantly reduced compared to existing methods. Overall, the proposed framework offers a scalable and intelligent solution for smart grid integration and distribution network modernization. Full article

In this paper, a very fast and reliable strategy for load restoration utilizing optimal distribution feeder reconfiguration (DFR) is developed. The automated network configuration switches can improve the resilience of a microgrid (MG) equipped with a centralized and coordinated energy management system (EMS). The EMS has the authority to reconfigure the distribution network to fulfil high priority loads in the entire network, at the lowest cost, while maintaining the voltage at desirable bounds. In the case of islanded operation, the EMS is responsible for serving the high priority loads, including the establishment of new MGs, if necessary. This paper discusses the main functionality of the EMS in both grid-connected and islanded operation modes of MGs. The proposed model is developed based on a mixed-integer quadratically constrained program (MIQCP), including an optimal power flow (OPF) problem to minimize the power losses in normal operation and the load shedding in islanded operation, while keeping voltage and capacity constraints. The proposed framework is implemented on a modified IEEE 33-bus test system and the results show that the model is fast and accurate enough to be utilized in real-life situations without a loss of accuracy. Full article

This paper addresses the challenge of restoring electrical service in distribution systems (DS) under contingency scenarios using a genetic algorithm (GA) implemented in MATLAB. The proposed methodology seeks to maximize restored load, considering operational constraints such as line loadability, voltage limits, and radial topology preservation. It is evaluated with simulations on the IEEE 34-bus test system under four contingency scenarios that consider the disconnection of specific branches. The algorithm’s ability to restore service is demonstrated by identifying optimal auxiliary line reconnections. The method maximizes restored load, achieving between 97% and 99% load reconnection, with an average of 98.8% across the four cases analyzed. Bus voltages remain above 0.95 pu and below the upper limit. Furthermore, test feeder results demonstrate that line loadability is mostly below 60% of the post-reconfiguration loadability. Full article

In recent years, extreme natural disasters, such as typhoons, have become increasingly frequent, leading to persistent power outages in urban distribution grids. These outages pose significant challenges to the stability of urban power supply systems. With the growing number of electric vehicle (EV) users and the expanding EV industry, and considering the potential of EVs as flexible load storage resources, this paper proposes a post-disaster power supply restoration strategy that takes into account the potential of coordinated scheduling of EVs and mobile energy storage. First, a compression method based on the Minkowski addition is proposed for the EV cluster model in charging stations, which establishes an EV dispatchable model. Second, the spatiotemporal matrix of failure rates for distribution network elements is calculated using the Batts wind field model, enabling the generation of distribution network failure scenarios under typhoon conditions. Finally, the power supply restoration strategy of multi-source coordination with the participation of EV cluster and mobile storage is formulated with the objective of minimizing the loss of the distribution network side. Simulation results demonstrate that the proposed strategy effectively utilizes the load storage potential of EVs and mobile energy storage, enhances recovery performance, ensures cost-effectiveness, and explicitly solves the islanding operation stability problem. Full article

Two-dimensional leaky-wave antennas offer effective, compact, single-feeder, easy-to-fabricate solutions to the longstanding problem of realizing a simultaneously directive and low-profile radiating device. These traveling-wave antennas have been thus proposed as wideband, reconfigurable, or frequency-scanning radiating structures in different application contexts, spacing from the microwave to terahertz frequency range. These diverse contexts call for a comprehensive guide to characterizing and designing two-dimensional leaky-wave antennas. In this work, a review of numerical techniques for the analysis of either quasi-uniform or radially periodic leaky-wave antennas is proposed in order to provide the reader with straightforward yet effective design guidelines. Theoretical results are corroborated through full-wave simulations of realistic three-dimensional models of the considered devices, thus demonstrating the effectiveness of the proposed methods. Full article

Smart grids (SGs) are essential for the efficient and distributed management of electrical distribution networks. A key task in SG management is fault detection and subsequently, network reconfiguration to minimize power losses and balance loads. This process should minimize power losses while optimizing distribution by balancing loads across the grid. However, the current literature yields a lack of methods for efficient fault prediction and fast reconfiguration. To achieve this goal, this paper builds on DEN2DE, an adaptable routing and reconfiguration solution potentially applicable to SGs, and investigates its potential extension with AI-based fault prediction using real-world datasets and randomly generated topologies based on the IEEE 123 Node Test Feeder. The study applies models based on Machine Learning (ML) and Deep Learning (DL) techniques, specifically evaluating Random Forest (RF) and Support Vector Machine (SVM) as ML methods, and Artificial Neural Network (ANN) as a DL method, evaluating each for accuracy, precision, and recall. Results indicate that the RF model with Recursive Feature Elimination (RFECV) achieves 94.28% precision and 81.05% recall, surpassing SVM (precision 89.32%, recall 6.95%) and ANN (precision 72.17%, recall 13.49%) in fault detection accuracy and reliability. Full article

In view of the complexity and importance of nuclear research reactor (NRR) installations, it is imperative to uphold high standards of reliability and quality in the electricity being supplied to them. In this paper, the performance of low-voltage (LV) distribution feeders integrated with NRRs is improved in terms of reduced distribution loss, improved voltage profile, and reduced greenhouse gas (GHG) emissions by determining the optimal location and size of photovoltaic (PV) systems. In the second stage, the power quality of the feeder is optimized by reducing the total harmonic distortion (THD) by optimally allocating D-STATCOM units. In the third and fourth stages, the reliability and resilience aspects of the feeder are optimized using optimal network reconfiguration (ONR) and by integrating an energy storage system (ESS). To solve the non-linear complex optimization problems at all these stages, an efficient meta-heuristic Chernobyl disaster optimizer (CDO) is proposed. Simulations are performed on a modified IEEE 33-bus feeder considering the non-linear characteristics of NRRs, variability of the feeder loading profile, and PV variability. The study reveals that the proposed methodology can significantly improve the service requirements of NRRs for attaining sustainable research activities. Full article

Two-dimensional leaky-wave antennas (LWAs) are a class of planar, traveling-wave radiators with attractive features of a low profile, ease of feeding, frequency reconfigurability of the radiation pattern, and polarization agility. Their use in conjunction with array feeders has been the subject of various investigations in recent decades, thanks to the additional degrees of freedom provided by the presence of multiple independent sources. Here, we provide a review of some of the most recent and promising array-fed two-dimensional (2-D) LWAs, selecting a couple of the most significant structures in application, namely Fabry–Perot cavity antennas and bull’s-eye antennas, and discussing some of their recently proposed advanced features. Full article

With the widespread integration of distributed resources, optimizing the operation of urban distribution networks faces challenges including uneven source-load-storage distribution, fluctuating feeder power flows, load imbalances, and network congestion. The urban snow-shaped distribution network (SDN), characterized by numerous intra-station and inter-station tie switches, serves as a robust framework to intelligently address these issues. This study focuses on enhancing the safe and efficient operation of SDNs through a two-phase optimal scheduling model that coordinates source-network-load-storage. In the day-ahead scheduling phase, an optimization model is formulated to minimize operational costs and mitigate load imbalances. This model integrates network reconfiguration, energy storage systems (ESSs), and flexible load (FL). During intra-day scheduling, a rolling optimization model based on model predictive control adjusts operations using the day-ahead plan to minimize the costs and penalties associated with power adjustments. It provides precise control over ESS and FL outputs, promptly correcting deviations caused by prediction errors. Finally, the proposed model is verified by an actual example of a snow-shaped distribution network in Tianjin. The results indicate significant improvements in leveraging coordinated interactions among source-network-load-storage, effectively reducing spatial-temporal load imbalances within feeder clusters and minimizing the impact of prediction inaccuracies. Full article

This paper presents the development of a generic active distribution network (ADN) operation simulation framework that incorporates selected swarm optimization algorithms (SOAs) for the purpose of reducing CO₂ emissions and line loss minimization through network reconfiguration (NR). The framework has been implemented in the ADN of Taipower. Network data, provided by the Distribution Mapping Management System and Distribution Dispatch Control Center (DDCC) of Taipower, were converted into an OpenDSS script to create ADN models. The SOA is integrated into the framework and utilized to determine the statuses of both four-way and two-way switches in the planning and operating stages, in accordance with the proposed multi-objective function and operational constraints. The weightings for these decisions can be customized by distribution operators to meet their specific requirements. In this paper, the weighting for line loss reduction is set to one for minimizing CO₂ emissions. The numerical results demonstrate that the proposed ADN framework can recommend a feeder switching scheme to distribution operators, aiming to balance feeder loading and minimize the neutral line current. Finally, this approach leads to reduced line losses and minimizes CO₂ emissions. In contrast to relying solely on historical operational experience, this generic ADN reconfiguration framework offers a systematic approach that can significantly contribute to reducing CO₂ emissions and enhancing the operational efficiency of ADNs. Full article

Power distribution systems (PDS) comprise essential electrical components and infrastructure that facilitate the delivery of electrical energy from a power transmission system to end users. Typically, the topology of distribution systems is radial, so that power goes from the substations to end users through main lines or feeders. However, the expansion of new feeders to accommodate new users and ever-growing energy demand have led to higher energy losses and deterioration of the voltage profile. To address these challenges, several solutions have been proposed, including the selection of optimal conductors, allocation of voltage regulators, utilization of capacitor banks, implementation of distributed generation, and optimal reconfiguration. Although reconfiguring the network is the most cost-effective approach, this solution might not be sufficient to completely minimize technical losses and improve system performance. This paper presents a novel approach that combines optimal distribution network reconfiguration (ODNR) with optimal conductor selection (OCS) to minimize power losses and enhance the voltage profiles of PDS. The key contribution lies in the integration of the ODNR and OCS into a single MILP problem, ensuring the attainment of globally optimal solutions. The proposed model was tested with benchmark 33-, 69-, and 85-bus test systems. The results allowed us to conclude that the combined effect of ODNR and OCS presents better results than when any of these approaches are applied either separately or sequentially. Full article

Governments worldwide have adopted energy-saving policies out of concern for the planet. System efficiency and renewable energy are needed to reduce greenhouse gas emissions, which cause climate change. Electricity generation is the biggest polluter, followed by transportation. Electric vehicles would strain electricity infrastructure without technical solutions. This study uses a hybrid genetic algorithm particle sworn optimization (HGAPSO) to find the optimal switching and feeder reconfiguration approach. Meet transmission constraints while reducing real power losses and improving system bus voltage. In the context of power system change, what are the benefits of employing the HGAPSO approach as opposed to the GA method and the PSO method, respectively. HGAPSO increases network power losses and voltage dispersion. Improved algorithms can help solve this crucial issue. It uses many heuristic optimization techniques to reconfigure transmission network connectivity and determine the best configuration. Limit bus voltage changes while maintaining the system’s radial structure and lowering power usage. MATLAB’s IEEE 33-bus communication network evaluated procedure reliability and performance. The results show that the proposed method reduces power waste during standalone runs and speeds up processing. Full article

Distribution network operators and planners face a significant challenge in optimizing planning and scheduling strategies to enhance distribution network efficiency. Using improved particle swarm optimization (IPSO), this paper presents an effective method for improving distribution system performance by concurrently deploying remote-controlled sectionalized switches, distributed generation (DG), and optimal network reconfiguration. The proposed optimization problem’s main objectives are to reduce switch costs, maximize reliability, reduce power losses, and enhance voltage profiles. An analytical reliability evaluation is proposed for DG-enhanced reconfigurable distribution systems, considering both switching-only and repairs and switching interruptions. The problem is formulated in the form of a mixed integer nonlinear programming problem, which is known as an NP-hard problem. To solve the problem effectively while improving conventional particle swarm optimization (PSO) exploration and exploitation capabilities, a novel chaotic inertia weight and crossover operation mechanism is developed here. It is demonstrated that IPSO can be applied to both single- and multi-objective optimization problems, where distribution systems’ optimization strategies are considered sequentially and simultaneously. Furthermore, IPSO’s effectiveness is validated and evaluated against well-known state-of-the-art metaheuristic techniques for optimizing IEEE 69-node distribution systems. Full article

Power distribution systems (PDS) are the infrastructure and equipment used to distribute electricity from the transmission system to end-users, such as homes and businesses. PDS are usually designed to operate in a radial mode, where power flows from one substation to the end user through a series of feeders. The extension of distribution lines to attend new customers along with the growing demand for electricity result in increased energy losses and voltage reductions. Various solutions have been proposed to solve these issues, such as selecting the optimal set of conductors, optimizing the placement of voltage regulators, using capacitor banks, reconfiguring the distribution system, and implementing distributed generation. A well-known approach for reducing energy losses and enhancing voltage profile is the optimal conductor selection (OCS). While this can be beneficial, it may not be sufficient to fully reduce technical losses and improve the system voltage profile; therefore, it must be combined with other strategies. This paper presents a new approach that combines the OCS with the optimal placement of capacitor banks (OPCB) to minimize technical losses and improve the voltage profile in PDS. The main contribution of this paper is the integration of these two problems into a single mixed integer linear programming (MILP) model, therefore guaranteeing the achievement of globally optimal solutions. Three test systems of 27, 69, and 85 buses were used to illustrate the effectiveness of the proposed modeling approach. The results indicate that the combination of OCS and OPCB effectively minimizes energy losses and enhances the voltage profile. In all cases, the solutions obtained by the proposed MILP approach were better than those previously reported through metaheuristics for the combined OCS and OPCB problem. Full article

The objective of this study is to analyze feeder loss minimization and load balance under given constrains. Effective methods are required for feeder switching/reconfiguration. Feeder switching is a mixed-integer large-scale combinatorial problem for optimization, not easily solvable with classical optimization techniques, especially involving a great number of switches. This paper proposes a fuzzy indexing algorithm for feeder switching, with membership functions defined for switches such as thermometers or indices. The optimal switches can be determined through fuzzy index operations. With membership functions defined, the developed method used numerical operations for indices instead of the “set” operation or the min-max operations of traditional fuzzy algorithms. The optimization problem becomes a simple numeric calculation instead of a large-scale sorting problem and is much faster than most algorithms. It greatly reduces the computation time and enhances efficiency, which is suitable for either planning or operation purposes. Many algorithms were tested with three typical examples chosen for illustration, including the “optimal” results with an exhausted search. It shows that the proposed algorithm is very effective and can balance the load to reduce the loss and costs in obtaining the solution. Full article