Search Results (229)

Magnetorheological (MR) foams represent a class of smart materials with unique tunable viscoelastic properties when subjected to external magnetic fields. Combining porous structures with embedded magnetic particles, these materials address challenges such as leakage and sedimentation, typically encountered in conventional MR fluids while offering advantages like lightweight design, acoustic absorption, high energy harvesting capability, and tailored mechanical responses. Despite their potential, challenges such as non-uniform particle dispersion, limited durability under cyclic loads, and suboptimal magneto-mechanical coupling continue to hinder their broader adoption. This review systematically addresses these issues by evaluating the synthesis methods (ex situ vs. in situ), microstructural design strategies, and the role of magnetic particle alignment under varying curing conditions. Special attention is given to the influence of material composition—including matrix types, magnetic fillers, and additives—on the mechanical and magnetorheological behaviors. While the primary focus of this review is on MR foams, relevant studies on MR elastomers, which share fundamental principles, are also considered to provide a broader context. Recent advancements are also discussed, including the growing use of artificial intelligence (AI) to predict the rheological and magneto-mechanical behavior of MR materials, model complex device responses, and optimize material composition and processing conditions. AI applications in MR systems range from estimating shear stress, viscosity, and storage/loss moduli to analyzing nonlinear hysteresis, magnetostriction, and mixed-mode loading behavior. These data-driven approaches offer powerful new capabilities for material design and performance optimization, helping overcome long-standing limitations in conventional modeling techniques. Despite significant progress in MR foams, several challenges remain to be addressed, including achieving uniform particle dispersion, enhancing viscoelastic performance (storage modulus and MR effect), and improving durability under cyclic loading. Addressing these issues is essential for unlocking the full potential of MR foams in demanding applications where consistent performance, mechanical reliability, and long-term stability are crucial for safety, effectiveness, and operational longevity. By bridging experimental methods, theoretical modeling, and AI-driven design, this work identifies pathways toward enhancing the functionality and reliability of MR foams for applications in vibration damping, energy harvesting, biomedical devices, and soft robotics. Full article

Ex situ machine perfusion has emerged as a pivotal technique for organ preservation and pre-transplant viability assessment, where the real-time monitoring of mitochondrial biomarkers—flavin mononucleotide (FMN) and nicotinamide adenine dinucleotide (NADH)—could significantly mitigate ischemia-reperfusion injury risks. This study develops a non-invasive optical method combining fluorescence and UV-visible spectrophotometry to quantify FMN and NADH in hypothermic oxygenated perfusion media. Calibration curves revealed linear responses for both biomarkers in absorption and fluorescence (FMN: λ_ex = 445 nm, λ_em = 530–540 nm; NADH: λ_ex = 340 nm, λ_em = 465 nm) at concentrations < 100 μg mL⁻¹. However, NADH exhibited nonlinear fluorescence above 100 μg mL⁻¹, requiring shifted excitation to 365 nm for reliable detection. Spectroscopic analysis further demonstrated how perfusion solution composition alters FMN/NADH fluorescence properties, with consistent reproducibility across media. The method’s robustness was validated through comparative studies in clinically relevant solutions, proposing a strategy for precise biomarker quantification without invasive sampling. These findings establish a foundation for real-time, optical biosensor development to enhance organ perfusion monitoring. By bridging spectroscopic principles with clinical needs, this work advances translational sensor technologies for transplant medicine, offering a template for future device integration. Full article

Layered transition metal dichalcogenides (TMDs) have gained considerable attention as promising cathodes for aqueous zinc-ion batteries (AZIBs) because of their tunable interlayer architecture and rich active sites for Zn²⁺ storage. However, unmodified TMDs face significant challenges, including limited redox activity, sluggish kinetics, and insufficient structural stability during cycling. These limitations are primarily attributed to their narrow interlayer spacing, strong electrostatic interactions, the large ionic hydration radius, and their high binding energy of Zn²⁺ ions. To address these restrictions, an in situ organic polyaniline (PANI) intercalation strategy is proposed to construct molybdenum disulfide (MoS₂)-based cathodes with extended layer spacing, thereby improving the zinc storage capabilities. The intercalation of PANI effectively enhances interplanar spacing of MoS₂ from 0.63 nm to 0.98 nm, significantly facilitating rapid Zn²⁺ diffusion. Additionally, the π-conjugated electron structure introduced by PANI effectively shields the electrostatic interaction between Zn²⁺ ions and the MoS₂ host, thereby promoting Zn²⁺ diffusion kinetics. Furthermore, PANI also serves as a structural stabilizer, maintaining the integrity of the MoS₂ layers during Zn-ion insertion/extraction processes. Furthermore, the conductive conjugated PANI boosts the ionic and electronic conductivity of the electrodes. As expected, the PANI–MoS₂ electrodes exhibit exceptional electrochemical performance, delivering a high specific capacity of 150.1 mA h g⁻¹ at 0.1 A g⁻¹ and retaining 113.3 mA h g⁻¹ at 1 A g⁻¹, with high capacity retention of 81.2% after 500 cycles. Ex situ characterization techniques confirm the efficient and reversible intercalation/deintercalation of Zn²⁺ ions within the PANI–MoS₂ layers. This work supplies a rational interlayer engineering strategy to optimize the electrochemical performance of MoS₂-based electrodes. By addressing the structural and kinetic limitations of TMDs, this approach offers new insights into the development of high-performance AZIBs for energy storage applications. Full article

Renewable energy-driven water electrolysis is widely regarded as a pivotal approach for achieving carbon-free hydrogen production. The development of highly efficient electrocatalysts is crucial to advancing the efficiency and scalability of electrolytic water splitting. Recent advancements in characterization techniques have revealed that catalysts often undergo surface reconstruction during the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), leading to the formation of real active species. Understanding the surface reconstruction process through advanced characterization methods is essential for the rational design of high-performance catalysts. However, the surface reconstruction of catalysts is a highly complex phenomenon, and conventional ex situ characterization techniques often fall short of capturing the dynamic evolution of the catalyst surface. Consequently, in situ characterization methods have emerged as indispensable tools for elucidating the surface reconstruction process. This paper provides a detailed review of the process of surface reconstruction, the reasons behind it, and the in situ characterization methods, and finally discusses the challenges faced by the characterization methods for the reconstruction of water electrolysis catalysts in future development. Full article

Growing requirements in the field of environmental protection and waste management result in the need to search for new and effective methods of recycling various types of waste. From the perspective of technical and natural sciences, the disposal of hazardous waste, which can lead to environmental degradation, is of utmost importance. A particularly hazardous waste is asbestos, used until recently in many branches of the economy and industry. Despite the ban on the production and use of asbestos introduced in many countries, products containing it are still present in the environment and pose a real threat. This paper presents the results of research related to the process of asbestos neutralization, especially the chrysotile variety, by the thermal decomposition method. Changes in the mineralogical characteristics of asbestos waste were studied using the following methods: TG-DTA-EGA, XRD, SEM-EDS and XRF. The characteristics of the chrysotile asbestos sample were determined before and after thermal treatment at selected temperatures. The second part of the study focuses on the kinetic aspect of this process, where the chrysotile thermal decomposition process was measured by two techniques: ex situ and in situ. This study showed that the chrysotile structure collapsed at approximately 600–800 °C through dehydroxylation, and then the fibrous chrysotile asbestos was transformed into new mineral phases, such as forsterite and enstatite. The formation of forsterite was observed at temperatures below 1000 °C, while enstatite was created above this temperature. From the kinetic point of view, the chrysotile thermal decomposition process could be described by the Avrami–Erofeev model, and the calculated activation energy values were ~180 kJ mol⁻¹ and ~220 kJ mol⁻¹ for ex situ and in situ processes, respectively. The obtained results indicate that the thermal method can be successfully used to detoxify hazardous chrysotile asbestos fibers. Full article

Post-processing plays a vital role in the determination of the final structures and properties of oriented materials. As a sustainable candidate of oil-based poly(ethylene terephthalate), biobased poly(ethylene 2,5-furandicarboxylate) (PEF) reflects great promise in green fiber, film, and packaging applications, but it undergoes poor stress-induced crystallization (SIC) under tensile deformation, necessitating a post-processing technique to improve its crystallinity and stability. Here, the structural evolution of pre-stretched PEF under post heating after uniaxial deformation was monitored by online synchrotron X-ray diffraction/scattering, differential scanning calorimetry, and ex situ infrared spectroscopy. The results delineate the significantly enhanced crystallization of pre-deformed PEF that happened far below its cold crystallization temperature. Through the isochronous analyses of the temperature-dependent evolution of mechanical response, the mesophase, crystal structure, orientation factor, chain conformation, and interchain ═C−H···O═C hydrogen bonding, the molecular mechanisms of microstructural transition and oriented crystallization of pre-drawn PEF under post heating were clarified. This research can enhance the understanding of PEF crystallization in an oriented state and provide guidelines on the structural design and technical control for processing high-performance PEF-based materials. Full article

Combining carbon materials with oxides in a hybrid electrode is an effective way to control supercapacitor performance in terms of balancing energy and power density with cycling stability. However, it is still unclear how the mixing method of each component affects the supercapacitor performance. In this study, the influence of mixing reduced graphene oxide (rGO) with ilmenite-type nickel-manganese oxide (NiMnO₃) on the capacitive behaviour of the resulting composites is investigated. Two preparation methods are compared: mechanical mixing and ultrasonication. The capacitive characteristics were evaluated in hybrid supercapacitors using 6M KOH electrolyte. The bulk, surface, and morphological changes of the composites after long-term cycling were probed by EIS and ex situ XRD, XPS, and SEM analyses. It is established that the composites obtained by mechanical mixing exhibit better performance due to the stable contact between rGO and NiMnO₃ particles, favourable surface reactions with KOH and preserved morphology of rGO. These findings indicate that efficient hybrid electrodes can be achieved without relying on costly synthesis techniques such as hydrothermal or ultrasonic treatments. Full article

A new type of hydrogen, produced in situ in petroleum reservoirs, is proposed. This technology is based on ex situ catalytic gasification of biomass, combining two thermal enhanced oil recovery techniques currently used in industrial fields: cyclic steam stimulation and in situ combustion. This hydrogen, named “light-blue hydrogen”, is produced in reservoirs, like naturally occurring white hydrogen, and from fossil fuels, like blue hydrogen. The color light blue results from the blending of white and blue. This approach is particularly suitable for mature petroleum reservoirs, which are in the final stages of production or no longer producing oil. This manuscript describes the method for producing light-blue hydrogen in situ, its commercial application prospects, and the challenges for developing and scaling up this technology. Full article

Plasma electrolytic oxidation (PEO) is an electrochemical surface modification technique for producing dense oxide layers on valve metals. This review compiles the various modifications to the PEO process that have been used to improve the produced coatings and make them suitable for specific applications, with a focus on examples of aluminum, magnesium, and titanium substrates. An overview of the PEO process is given, highlighting the various process parameters and their effects on the final surface. The challenges with light metals that motivate the use of surface modifications are summarized, along with some of the other modifications that attempt to overcome them. Two broad categories of modifications to the PEO process are presented: in situ modifications, influencing the properties of the coating during its formation, and ex situ modifications, augmenting the properties of an already-formed coating. Finally, specific examples of applications for modified PEO processes are discussed, including battery, biomedical, water treatment, and energy production applications. Full article

UiO-66-NH₂ is a metal–organic framework (MOF) with open metal sites, making it a promising candidate for adsorption and catalysis. However, the powdery texture of MOFs and the use of toxic solvents during synthesis limit their application. A novel solution to this issue is to create a layered porous composite by encasing the MOF within a flexible and structurally robust aerogel substrate using safe, eco-friendly, and green solvents such as ethanol. The fibrous MOF aerogels, characterized by a desirable macroscopic shape of cylindrical block and hierarchical porosity, were synthesized by two approaches: in situ growth of amine-functionalized UiO-66-NH₂ crystals on a TEMPO-oxidized cellulose nanofiber (TOCNF) and ex situ crosslinking of UiO-66-NH₂ crystals onto a TOCNF network to form UiO-66-NH₂/TOCNF. The incorporation of MOF into the cellulose nanofibrils via the in situ method reduces their aggregation potential, alters the nucleation/growth balance to produce smaller MOF crystals, and enhances mechanical flexibility, as evidenced by SEM images. The three adsorbents, including UiO-66-NH₂, ex situ UiO-66-NH₂/TOCNF, and in situ UiO-66-NH₂/TOCNF, were synthesized and used in this study. The effects of pH, time, temperature, and initial concentration were studied. A maximum adsorption capacity (Qmax) of 549.45 mg/g for Congo Red (CR) and 171.23 mg/g for Orange II (ORII) was observed at pH 6, using 10 mg of in situ UiO-66-NH₂/TOCNF at 40 °C with a contact time of 75 min for CR and 2 h for ORII. The adsorption of both dyes primarily occurs through monolayer chemisorption on the in situ UiO-66-NH₂/TOCNF. The main removal mechanisms were hydrogen bonding and surface complexation. The noteworthy adsorption capacity of in situ UiO-66-NH₂/TOCNF coupled with environment-friendly fabrication techniques indicates its potential applications on a large scale in real wastewater systems. Full article

Background/Objectives: Cutaneous squamous cell carcinoma (cSCC) is the second most common skin cancer, with diverse clinical presentations. This study aims to correlate findings from dermoscopy, ultrasonography, ex vivo confocal microscopy, and histology to improve diagnostic accuracy and guide better clinical management of cSCC. Methods: This cross-sectional study, conducted between July 2022 and December 2024, included 26 patients with 35 clinically suspicious cSCC tumors, analyzed through clinical, dermoscopic, high-frequency ultrasound (HFUS), ex vivo confocal fluorescence microscopy (FCM), and histopathology. Tumors were evaluated for various clinical, imaging, and histopathological criteria, such as tumor thickness, vascularization, differentiation degree, and invasion level, with FCM applied to 24 tumors for advanced microscopic analysis. Results: The study analyzed 35 cases of histopathologically confirmed cSCC, finding that invasive SCC was associated with greater tumor thickness, increased vascularization, and ulceration on both ultrasound and dermatoscopy, while in situ SCC showed homogeneous echogenicity and specific dermoscopic patterns like dotted vessels and white halos. Strong correlations were identified between ultrasound and histopathological measurements of tumor thickness and invasion depth, and confocal microscopy revealed that features like plump bright cells and nest-like structures were linked to invasive and poorly differentiated tumors. Conclusions: This study uniquely integrates advanced imaging techniques—dermatoscopy, skin ultrasound, and ex vivo confocal microscopy—with histopathological analysis to provide new insights into tumor grade, vascularity, and invasion depth in cSCC, enhancing non-invasive diagnosis. Full article

For many years, countries around the world have been struggling with the problem of storing asbestos waste, especially in, those countries where the production and use of asbestos products have been legally banned. Following the adoption of plans for cleaning up asbestos waste, countries are struggling with the problem of its disposal, which mainly involves storing it in specialist landfills. At the same time, scientists are looking for alternatives to this type of “disposal” of asbestos by developing methods for degrading the harmful fibers. Particular attention has been paid to methods based on the thermal treatment of this waste, which results in hazardous asbestos fibers being thermally decomposed. This work focuses on the kinetic study of the thermal decomposition process of cement–asbestos using an exsitu thermal treatment. The results obtained made it possible to interpret this thermal transformation kinetically. Kinetic analysis of the isothermal data using an Avrami–Erofeev model yielded values for the overall reaction order. On this basis, the value of the apparent activation energy of the thermal decomposition process of the tested cement–asbestos samples was obtained, which was approximately 140–180 kJ mol⁻¹. Full article

Lithium metal negative electrodes are pivotal for next-generation batteries because of their exceptionally high theoretical capacity and low redox potential. However, their commercialization is constrained by critical challenges, including dendrite formation, volumetric instability, and the fragility of the solid electrolyte interphase (SEI). In this context, this review highlights the transformative potential of ex situ surface treatments, which stabilize lithium metal electrodes before cell assembly. Key advancements include inorganic and polymer-based coatings that enhance SEI stability and mitigate dendrite growth, three-dimensional host architectures that manage volumetric changes and improve lithium diffusion, and liquid-phase chemical modifications that enable uniform lithium deposition. These strategies are critically evaluated for their scalability, environmental sustainability, and long-term stability, paying particular attention to cost, complexity, and ecological considerations. In addition, their potential contributions to the development of advanced battery technologies are discussed, providing insights into pathways toward enhanced commercial viability. By synthesizing cutting-edge research and identifying unresolved challenges, this review provides a comprehensive roadmap for advancing safer, more efficient, and more durable lithium metal batteries, thereby bridging the gap between laboratory research and commercial adoption. Full article

In vitro shoot culture and cryopreservation (CP) are techniques essential for the ex situ preservation of genetic resources and the production of plant propagation material of clonally propagated horticultural crops. Changes in plant-associated microbiota diversity and composition induced by in vitro cultivation and CP treatment could have a negative effect on the growth and ex vitro adaptation of the in vitro propagated shoots. Therefore, the aim of the present study was to assess changes in endophytic bacteria diversity in domestic apple tissues induced by in vitro cultivation and CP treatment and to investigate the potential of the bacterial inoculum to improve the rooting and ex vitro acclimatisation of the propagated shoots. Metataxonomic analysis revealed a variation in the endophytic bacteria diversity and taxonomic composition between the field-grown tree dormant bud and the in vitro propagated or CP-treated shoot samples of apple cv. Gala. Whereas Sphingobacteriaceae, Sphingomonadaceae, Pseudomonadaceae, and Beijerinckiaceae families were the most prevalent families in the bud samples, Enterobacteriaceae, Bacillaceae, and Lactobacillaceae were dominant in the in vitro shoots. The bacterial inoculum effect on rooting and ex vitro acclimatisation was assessed using four isolates selected by screening the endophytic isolate collection. Bacillus sp. L3.4, B. toyonensis Nt18, or a combined inoculum resulted in a 21%, 36%, and 59% increase in cumulative root length and a 41%, 46%, and 35% increase in the biomass accumulation of ex vitro acclimatised plantlets, respectively. Root zone microbiota functional diversity analysis implied that growth stimulation was not related to improved nutrient uptake but could involve a pathogen-suppressing effect. The results demonstrate that the application of plant growth-promoting bacteria can potentially improve the performance of the in vitro propagated germplasm. Full article

The common bean (Phaseolus vulgaris L.) arrived in Europe in the sixteenth century from the American continent and spread across the old continent as a result of adaptation to different climatic and geographical conditions, as well as selection for different cultivation techniques and eating habits. This expansion gave rise to a huge number of landraces, which have now been largely replaced by more productive cultivars. To avoid losing this genetic diversity heritage, it is essential to characterize the genetic resources at risk of extinction for correct in situ/ex situ conservation and as a first step toward promoting and relaunching their exploitation. In this article, we report the study of a group of Borlotti beans, both landraces and modern cultivars, which are typically cultivated in Northern Italy. The aim was to explore the variability within the assembled Borlotti panel to assess whether landraces have maintained their morphological and genetic identity over time during on-farm cultivation. In particular, we investigated whether it is possible to distinguish between landraces and commercial accessions, a topic that has so far been understudied, but in the field of conservation, it is particularly important because it allows for the prioritization of preserving genetic resources. We found distinctive traits among the various accessions, with only a few landraces maintaining their identity, many of which should more properly be defined as obsolete cultivars. Taken together, these data indicate that it is possible to establish a priority scale for in/ex situ conservation by comparing landraces and cultivars using morphological and genetic data. Furthermore, thanks to geographical isolation, on-farm conservation has proven to still be successful in maintaining the identity of landraces. Full article