Search Results (345)

Water pollution caused by increasing industrial and human activity remains a serious environmental challenge, especially due to the persistence of organic contaminants in aquatic systems. Photocatalysis offers a promising and eco-friendly solution, but in the case of bismuth oxide (Bi₂O₃) there is still a limited understanding of how structural and morphological features influence photocatalytic performance. In this work, a straightforward hydrothermal synthesis method followed by controlled calcination was developed to produce phase-pure α- and β-Bi₂O₃ with tunable morphologies. By varying the hydrothermal temperature and reaction time, distinct structures were successfully obtained, including flower-like, broccoli-like, and fused morphologies. XRD analyses showed that the final crystal phase depends solely on the calcination temperature, with β-Bi₂O₃ forming at 350 °C and α-Bi₂O₃ at 500 °C. SEM and BET analyses confirmed that morphology and surface area are strongly influenced by the hydrothermal conditions, with the flower-like β-Bi₂O₃ exhibiting the highest surface area. UV–Vis spectroscopy revealed that β-Bi₂O₃ also has a lower bandgap than its α counterpart, making it more responsive to visible light. Photocatalytic tests using Rhodamine B showed that the flower-like β-Bi₂O₃ achieved the highest degradation efficiency (81% in 4 h). Kinetic analysis followed pseudo-first-order behavior, and radical scavenging experiments identified hydroxyl radicals, superoxide radicals, and holes as key active species. The catalyst also demonstrated excellent stability and reusability. Additionally, Methyl Orange (MO), a more stable and persistent azo dye, was selected as a second model pollutant. The flower-like β-Bi₂O₃ catalyst achieved 73% degradation of MO at pH = 7 and complete removal under acidic conditions (pH = 2) in less than 3 h. These findings underscore the importance of both phase and morphology in designing high-performance Bi₂O₃ photocatalysts for environmental remediation. Full article

As eco-friendly processes become central to modern organic synthesis, plant-based materials are emerging as attractive alternatives for both nanoparticle fabrication and catalysis. In this study, we explore the use of clove extract, a natural and renewable resource, for the green synthesis of copper oxide (CuO) nanoparticles and their subsequent application in organic transformations. Clove extract was employed to reduce copper chloride via a simple co-precipitation method under mild conditions, yielding CuO nanoparticles characterized by XRD, FTIR, and SEM-EDX techniques. These nanoparticles were then used as catalysts in the copper-catalyzed azide–alkyne cycloaddition (CuAAC) to afford eugenol-based 1,2,3-triazoles in excellent yields. This dual use of clove extract exemplifies a sustainable approach that merges natural product valorization with efficient catalysis for triazole synthesis. Full article

Electrochemical water splitting is an efficient and eco-friendly method for hydrogen production, offering a sustainable energy solution. Currently, the noble metal platinum is considered to be the most efficient catalyst for electrochemical hydrogen evolution reactions (HERs). Due to the scarcity and high cost of noble metal materials, there is an urgent need to find abundant and cost-effective non-noble metal catalysts to reduce the overpotential of HERs. In recent years, significant scientific advancements have been reported in non-noble metal HER catalysts. This review categorizes and reviews the recent non-noble metal HER catalysts and their reaction mechanisms. An exhaustive overview of proven effective catalyst categories is provided, offering early-career researchers a panoramic understanding of this dynamic research field. Finally, we address current challenges and future directions in this field to encourage further research efforts and the development of non-noble metal catalysts. Full article

Through the use of heterogeneous catalysts, catalytic ozone oxidation technology, an effective and eco-friendly advanced oxidation process (AOP), facilitates the breakdown of ozone into reactive oxygen species (like ·OH) and greatly increases the mineralization efficiency of pollutants. This study examines the development of heterogeneous ozone catalysts through a critical evaluation of the five primary preparation techniques: ion exchange, sol–gel, coprecipitation, impregnation, and hydrothermal synthesis. Each preparation method’s inherent qualities, benefits, drawbacks, and performance variations are methodically investigated, with an emphasis on how they affect the breakdown of different resistant organic compounds. Even though heterogeneous catalysts are more stable and reusable than homogeneous catalysts, they continue to face issues like active component leaching, restricted mass transfer, and ambiguous mechanisms. In order to determine the key paths for catalyst selection in catalytic ozone treatment going forward, the main goal of this review is to provide an overview of the accomplishments in the field of the heterogeneous ozone catalyst treatment of wastewater that is difficult to degrade. Full article

The disposal of wastewater resulting from petroleum industries presents a major environmental challenge due to the presence of hard-to-degrade organic pollutants, such as oils and hydrocarbons, and high chemical oxygen demand (COD). In this study, an efficient and eco-friendly method was developed to treat such wastewater using a photocatalyst composed of biochar derived from pistachio shells and loaded with zinc oxide (ZnO) nanoparticles. The biochar-ZnO composite was prepared via a co-precipitation-assisted pyrolysis method to evaluate its efficiency in the photocatalytic degradation of petroleum wastewater (PW). The synthesized material was characterized using various techniques, including scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FTIR) spectroscopy, to determine surface morphology, crystal structure, and functional groups present on the catalyst surface. Photocatalytic degradation experiments were conducted under UV and sunlight for 90 h of irradiation to evaluate the performance of the proposed system in removing oil and reducing COD levels. Key operational parameters, such as pH (2–10), catalyst dosage (0–0.1) g/50 mL, and oil and COD concentrations (50–500) ppm and (125–1252) ppm, were optimized by response surface methodology (RSM) to obtain the maximum oil and COD removal efficiency. The oil and COD were removed from PW (90.20% and 88.80%) at 0.1 g/50 mL of PS/ZnO, a pH of 2, and 50 ppm oil concentration (125 ppm of COD concentration) under UV light. The results show that pollutant removal is slightly better when using sunlight (80.00% oil removal, 78.28% COD removal) than when using four lamps of UV light (77.50% oil removal, 75.52% COD removal) at 0.055 g/50 mL of PS/ZnO, a pH of 6.8, and 100 ppm of oil concentration (290 ppm of COD concentration). The degradation rates of the PS/ZnO supported a pseudo-first-order kinetic model with R² values of 0.9960 and 0.9922 for oil and COD. This work indicates the potential use of agricultural waste, such as pistachio shells, as a sustainable source for producing effective catalysts for industrial wastewater treatment, opening broad prospects in the field of green and nanotechnology-based environmental solutions in the development of eco-friendly and effective wastewater treatment technologies under solar light. Full article

The electrochemical reduction of nitrate to ammonia offers a promising solution for both alleviating nitrate pollution in wastewater and providing a sustainable ammonia source for agriculture use. This review focuses on the role of carbon-based catalysts in electrochemical nitrate reduction to ammonia, emphasizing their potential in addressing environmental pollution and supporting sustainable ammonia production. Carbon materials, known for their abundance, affordability, and eco-friendly properties, are central to this process. The review highlights key strategies for enhancing catalytic performance, including heteroatom doping, the development of porous structures, and the integration of metal/metal oxide nanoparticles. Additionally, it addresses significant challenges such as weak nitrate adsorption, slow reaction kinetics, and competition with the hydrogen evolution reaction. Through the integration of advanced material design, mechanistic insights, and innovative engineering strategies, this review provides valuable guidance for the future design of carbon-based catalysts, paving the way for significant advancements in both nitrate removal and sustainable ammonia synthesis. Full article

To develop eco-friendly low-temperature NH₃-SCR catalysts for the non-electric industry, a series of CeMn-modified Ba₂Ti₅O₁₂ catalysts were synthesized using the sol-gel method to achieve denitrification. Activity tests revealed that Ce-Mn-modified Ba₂Ti₅O₁₂ catalysts exhibit excellent low-temperature denitrification performance with a broad operational temperature window. Characterization through XRD, XPS, BET, NH₃-TPD, and EPR indicated that Ce-Mn modification enhances surface oxygen chemisorption and increases acidity, significantly improving NO_x reduction. Notably, the optimal catalyst achieved NO_x conversion rates exceeding 90% within the temperature range of 90 to 240 °C under a gas hourly space velocity (GHSV) of 28,000 h⁻¹. In particular, the coexistence of Ce and Mn species promotes the oxidation of NO to NO₂, facilitating the “fast SCR” reaction. The abundance of valence states further enhances the catalyst’s ultra-low-temperature NH₃-SCR denitration performance. Full article

Polybutadiene (PB) and polyisoprene (PI) rubbers are indispensable synthetic elastomeric materials widely used in tires, footwear, hose, belts, sealants, electricity, construction, and other applications. Nowadays, PB and PI elastomers are produced from butadiene (BD) and isoprene (IP) monomers via transition-metal-mediated coordination polymerization. Transition metal catalytic systems consist of a precise characteristic structural unit at the molecular level: well known as “single-site catalysts” (SSCs). These have experienced a revolutionary advance in the recently developed conjugated dienes synthetic rubber method. Among the SSCs, a class of rare-earth, metal-centered half-sandwich molecule has been identified as a high-performance catalytic system for conjugated dienes polymerization. These novel half-sandwich rare-earth (HSRE) catalytic systems exhibit several irreplaceable advantages compared with the conventional Ziegler–Natta-type catalytic systems. These HSRE catalytic systems can create novel conjugated diene rubbers (CDRs) with high catalytic reactivity, high stereoselectivity, an adjustable polymer chain microstructure, and high molecular weights and are considered to be the next generation of ecofriendly and economic catalytic systems for industrial applications. This paper delivers a concise review of some important synthetic methods for representative HSRE complexes with characteristic structures and of the utilization of some HSRE catalytic systems for the preparation of high-performance CDRs, especially highly stereoregular PI and PB materials. Full article

The esterification of terephthalic acid (PTA) with methanol to dimethyl terephthalate (DMT) was investigated using commercially available zeolite catalysts as the eco-friendly solid acids. Six typical zeolites (ZSM-5-25, ZSM-5-50, ZSM-5-100, ZSM-35, MOR, and β) were systematically evaluated. Among them, β zeolite showed excellent catalytic performance, achieving nearly 100% PTA conversion and 76.1% DMT selectivity under the conditions of 200 °C, of 0.5 MPa N₂ pressure, m(PTA):V(methanol) of 1:40 (g/mL), m(PTA):m(catalyst) of 10:1 over 4 h. The characterization results show that the catalytic efficiency was correlated with acid site strength, specific surface area, and mesoporous structure of the zeolite. After optimization, β zeolite achieved 100% PTA conversion and 94.1% DMT selectivity under the conditions of 200 °C, of 1 MPa N₂ pressure, m(PTA)/V(methanol) of 1:30 (g/mL), m(PTA)/m(catalyst) of 8:1 over 8 h. Moreover, β zeolite exhibited superior stability, maintaining over 92% of its initial activity after five cycles, highlighting its potential for sustainable DMT production. Full article

Rapid industrialization has escalated environmental pollution caused by organic compounds, posing critical challenges for wastewater treatment. Advanced oxidation processes based on peroxymonosulfate (PMS) suffer from metal leaching and catalyst recycling challenges. To address these limitations, this study developed a nitrogen-doped biochar aerogel (NBA) derived from poplar wood powder as an eco-friendly and easily recoverable PMS activator. The NBA catalyst, optimized by tuning the calcination temperature to achieve a specific surface area of 297.5 m² g⁻¹, achieved 97% bisphenol A (BPA) removal within 60 min with a catalyst dosage of 0.3 g/L and 1.0 mM PMS under mild conditions. The material exhibited broad pH adaptability (pH 3.5–9), recyclability (>94% efficiency after thermal treatment), and versatility in degrading seven pollutants (BPA, phenol, 4-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol, rhodamine 6G, and levofloxacin) through synergistic radical (•OH, SO₄^•−, O₂^•−) and non-radical (¹O₂) pathways. X-ray photoelectron spectroscopy (XPS) analyses revealed that nitrogen doping enhanced PMS activation by optimizing electronic structures. This study highlights the potential of waste biomass-derived carbon aerogels as eco-friendly, efficient, and reusable catalysts for advanced oxidation processes in wastewater treatment. Full article

With the increasing detection of antibiotics such as sulfamethoxazole (SMX) in water bodies, developing efficient and eco-friendly treatment technologies is critical. This study employs a hydrothermal impregnation method to prepare a NiFe₂O₄/granular activated carbon (GAC) composite catalyst, optimized for use in a proton exchange membrane (PEM) electrolytic ozonation system to degrade SMX. Single-factor experiments optimized preparation conditions with a Fe:Ni molar ratio of 3:1, a GAC:Fe + Ni mass ratio of 2:1, and calcination at 500 °C for 3 h. The catalyst was characterized using XRD, SEM, TEM, XPS, and FT-IR, confirming a spinel NiFe₂O₄ structure (crystal size ~15.2 nm) uniformly dispersed on GAC, with an Fe:Ni atomic ratio of ~2.1:1. In the PEM system, the optimized catalyst achieved a 99.15% ± 0.3% SMX degradation rate (50 mg/L) within 25 min, compared to 95.06% ± 0.6% in 30 min without a catalyst. The catalyst maintained 98.45% ± 0.5% efficiency after three cycles, demonstrating excellent stability. The synergy between GAC adsorption and NiFe₂O₄ catalysis, driven by Fe³⁺/Fe²⁺ redox cycling, enhances ·OH generation from ozone decomposition, boosting SMX degradation. This work provides a robust catalyst for antibiotic wastewater treatment and a foundation for scaling up catalytic ozonation. Full article

The textile industry encounters serious environmental challenges from wastewater with persistent organic pollutants, demanding sustainable solutions for remediation. Herein, we report a novel green synthesis of flexible BiOBr@PZT nanocomposite membranes via electrospinning and successive ionic layer adsorption and reaction (SILAR) for visible-light-driven photocatalytic degradation. The hierarchical structure integrates leaf-like BiOBr nanosheets with PAN/ZnO/TiO₂ (PZT) nanofibers, forming a Z-scheme heterojunction. This enhances the separation of photogenerated carriers while preserving mechanical integrity. SILAR-enabled low temperature deposition ensures eco-friendly fabrication by avoiding toxic precursors and cutting energy use. Optimized BiOBr@PZT-5 shows exceptional photocatalytic performance, achieving 97.6% tetracycline hydrochloride (TCH) degradation under visible light in 120 min. It also has strong tensile strength (4.29 MPa) and cycling stability. Mechanistic studies show efficient generation of O₂⁻ and OH radicals through synergistic light absorption, charge transfer, and turbulence-enhanced mass diffusion. The material’s flexibility allows reusable turbulent flow applications, overcoming rigid catalyst limitations. Aligning with green chemistry and UN SDGs, this work advances multifunctional photocatalytic systems for scalable, energy-efficient wastewater treatment, offering a paradigm that integrates environmental remediation with industrial adaptability. Full article

Olive mill wastewater (OMW) represents a toxic waste generated during olive oil production (30 million m³/year). Its phytotoxicity and resistance to biodegradation are mainly due to the presence of polyphenols. Methodologies able to remove these organic compounds from this waste to allow the safe dispose of OMW have been developed, and among them, the most effective are oxidation procedures. In this context, we propose an alternative chemical treatment based on the oxidation of OMW using diluted hydrogen peroxide and seleno-organic compounds (diphenyl diselenide and diseleno-bis-benzoic acid) selected as eco-friendly bioinspired catalysts. The effectiveness of the protocol was monitored by Folin–Ciocalteu (F-C) quantification and NMR quantification. The results demonstrated that the greatest reduction in the total phenols content—up to 96%—was achieved using the highest concentrations of catalyst (0.6% _w/w) and oxidant (10% _v/v). Moreover, a toxicological evaluation was carried out using the marine bacteria Aliivibrio fischeri, revealing a significant decrease in toxicity. The EC₅₀ value increased from 0.089 mg/L in the untreated OMW to 18.740 mg/L in the treated sample after removal of the residual catalyst and peroxides. Full article

The rising concern over carbon dioxide (CO₂) emissions has led to increased research on its conversion into value-added chemicals. Glycerol carbonate (GC), a versatile and eco-friendly compound, can be synthesized via the catalytic carbonylation of glycerol with CO₂. This study investigates the catalytic performance of three novel mixed metal oxide catalysts, Ti-Al-Mg, Ti-Cr-Mg, and Ti-Fe-Mg, synthesized via co-precipitation. The catalysts were characterized using XRD, SEM, XPS, CO₂-TPD, FTIR, TGA-DTG, and nitrogen adsorption–desorption isotherms. Among the tested systems, Ti-Al-Mg demonstrated the highest surface area, optimal porosity, and a balanced acid–base profile, resulting in superior catalytic activity. Under optimized conditions (175 °C, 10 bar CO₂, 4 h), Ti-Al-Mg achieved a maximum GC yield of 36.1%, outperforming Ti-Cr-Mg and Ti-Fe-Mg. The improved performance was attributed to the synergistic effects of its physicochemical properties, including high magnesium content and lower CO₂ binding energy, which favored CO₂ activation and glycerol conversion while minimizing side reactions. These findings highlight the potential of tailored mixed metal oxide systems for efficient CO₂ immobilization and sustainable glycerol valorization. Full article

Bio-oil is a potential source for the production of alternative fuels and chemicals. In this work, Ni-V bimetallic zeolite catalysts were synthesized and evaluated in in situ catalytic hydrodeoxygenation (HDO) of pyrolysis volatiles of pine nut shell for upgraded bio-oil products. The pH and lower heating value (LHV) of the upgraded bio-oil products were improved by in situ catalytic HDO, while the moisture content and density of the oil decreased. The O/C ratio of the upgraded bio-oil products decreased significantly, and the oxygenated compounds in the pyrolysis volatiles were converted efficiently via deoxygenation over Ni-V zeolite catalysts. The highest HDO activity was obtained with NiV/MesoY, where the obtained bio-oil had the lowest O/C atomic ratio (0.27), a higher LHV (27.03 MJ/kg) and the highest selectivity (19.6%) towards target arenes. Owing to the more appropriate pore size distribution and better dispersion of metal active sites, NiV/MesoY enhanced the transformation of reacting intermediates, obtaining the dominant products of phenols and arenes. A higher HDO temperature improved the catalytic activity of pyrolysis volatiles to form more deoxygenated arenes. Higher Ni loading could generate more metal active sites, thus promoting the catalyst’s HDO activity for pyrolysis volatiles. This study contributes to the development of cost-efficient and eco-friendly HDO catalysts, which are required for producing high-quality biofuel products. Full article