Search Results (41)

Curcumin, a natural polyphenol derived from Curcuma longa, is widely recognized for its therapeutic properties. However, its clinical utility is limited because of poor solubility, rapid degradation and hence low bioavailability. To overcome these issues, nanoformulation approaches, especially PEGylated liposomes, have been explored as advanced delivery systems. PEGylation, which involves attaching polyethylene glycol (PEG) to the liposomal surface, enhances circulation time by creating a steric shield that reduces protein interactions and clearance by the mononuclear phagocyte system (MPS). However, PEG can alter lipid membrane properties, which may in turn affect curcumin’s solubility and distribution within the liposomal bilayer, ultimately reducing its loading efficiency. To ensure that PEG-modified liposomes can be effectively loaded with curcumin, we investigated curcumin–membrane interactions in saturated (DMPC) and unsaturated (POPC) liposomes, both in the presence and absence of PEG. Based on dissociation constants (K_d) obtained from fluorescence spectroscopy measurements, we found that PEGylated DMPC liposomes exhibit the strongest binding affinity for curcumin. Fluorescence quenching experiments showed that curcumin adopts a transbilayer orientation in all membranes examined. Curcumin’s location within PEGylated and non-PEGylated liposomal membranes was further confirmed by examining its effects on membrane properties, including fluidity, polarity, and oxygen transport. These effects were investigated using electron paramagnetic resonance (EPR) spectroscopy with spin labels. The results indicate that PEG does not impose major changes on membrane properties. Curcumin, however, was found to reinforce the liposomal membranes, increase their polarity, and reduce oxygen availability. Overall, the findings suggest that liposomes, particularly those composed of PEGylated DMPC, are effective vehicles for curcumin delivery. Full article

The formation of the oxygen negative ion O⁻ from simple molecules such as O₂, CO₂, CO, NO, and NO₂ is of fundamental importance in environmental, atmospheric, and biological processes. This study investigates the mechanisms of O⁻ ion generation from these gases by analyzing the dependence of O⁻ ion current intensity on filament temperature. Optimum temperatures for O⁻ formation were identified for each gas, ranging from 1548 to 1721 °C. A comparison with the calculated thermal decomposition temperatures of the respective compounds indicates that distinct ion formation pathways are involved. For NO₂, the process likely involves a two-step dissociation mechanism, with molecular oxygen (O₂) formed in the first step, subsequently dissociating into O⁻ and O atoms. In contrast, for CO, O⁻ formation predominantly occurs through electron capture followed by molecular dissociation. These findings underscore the complex nature of negative surface ionization, which includes contributions from the capture of emitted from the cathode electrons by molecules. Full article

Epichlorohydrin is used as an intermediate for the synthesis of polymers and, more particularly, epoxy adhesives. The traditional process involves the cleavage of the carbon-chlorine bond in an alkaline solution. Here, we investigate the breakage of this bond induced by low-energy (<10 eV) electrons. We show the production of the chlorine anion via a resonant process at different energies. The experimental observations are completed by quantum chemistry calculations of the involved molecular orbitals in the formation of the precursor temporary anions, and their decay mechanisms are discussed in terms of the complex potential energy curve crossing network. The gained information may potentially contribute to a strategy of synthesis by other means where low-energy electrons are implicated, i.e., cold plasmas or even scanning tunnelling microscope for which the bond breakage can be controlled by the energy of the colliding electrons. Full article

(1) Background: DNA damage is of great importance in the understanding of the effects of ionizing radiation. Various types of DNA damage can result from exposure to ionizing radiation, with clustered types considered the most important for radiobiological effects. (2) Methods: The code RITRACKS (Relativistic Ion Tracks), a program that simulates stochastic radiation track structures, was used to simulate DNA damage by photons and ions spanning a broad range of linear energy transfer (LET) values. To perform these simulations, the transport code was modified to include cross sections for the interactions of ions or electrons with DNA and amino acids for ionizations, dissociative electron attachment, and elastic collisions. The radiochemistry simulations were performed using a step-by-step algorithm that follows the evolution of all particles in time, including reactions between radicals and DNA structures and amino acids. Furthermore, detailed DNA damage events, such as base pair positions, DNA fragment lengths, and fragment yields, were recorded. (3) Results: We report simulation results using photons and the ions ¹H⁺, ⁴He²⁺, ¹²C⁶⁺, ¹⁶O⁸⁺, and ⁵⁶Fe²⁶⁺ at various energies, covering LET values from 0.3 to 164 keV/µm, and performed a comparison with other codes and experimental results. The results show evidence of DNA protection from damage at its points of contacts with histone proteins. (4) Conclusions: RITRACKS can provide a framework for studying DNA damage from a variety of ionizing radiation sources with detailed representations of DNA at the atomic scale, DNA-associated proteins, and resulting DNA damage events and statistics, enabling a broader range of future comparisons with experiments such as those based on DNA sequencing. Full article

Ethylenediamine is industrially used as an intermediate for the fabrication of many products. The development of new methodologies for synthesis compatible with the environment and sustainability, such as cold plasma processes, implicates reactions induced by nonthermal electrons. In this contribution, we study the interaction of low-energy (<10 eV) electrons with ethylenediamine. We show that electrons induce the fragmentation of the molecule into various anion fragments and associated neutral counterparts via dissociative electron attachment. The fragmentation mechanisms and energetics are discussed in the frame of DFT calculations. The fragmentation processes are quantified by the estimation of the cross sections and the branching ratios for competitive accessible dissociation routes. Full article

Diterpenes from the Euphorbia genus are known for their ability to regulate the protein kinase C (PKC) family, which mediates their ability to promote the proliferation of neural precursor cells (NPCs) or neuroblast differentiation into neurons. In this work, we describe the isolation from E. resinifera Berg latex of fifteen 12-deoxyphorbol esters (1–15). A triester of 12-deoxy-16-hydroxyphorbol (4) and a 12-deoxyphorbol 13,20-diester (13) are described here for the first time. Additionally, detailed structural elucidation is provided for compounds 3, 5, 6, 14 and 15. The absolute configuration for compounds 3, 4, 6, 13, 14 and 15 was established by the comparison of their theoretical and experimental electronic circular dichroism (ECD) spectra. Access to the above-described collection of 12-deoxyphorbol derivatives, with several substitution patterns and attached acyl moieties, allowed for the study of their fragmentation patterns in the collision-induced dissociation of multiple ions, without precursor ion isolation mass spectra experiments (HRMS^E), which, in turn, revealed a correlation between specific substitution patterns and the fragmentation pathways in their HRMS^E spectra. In turn, this allowed for a targeted UHPLC-HRMS^E analysis and a biased non-targeted UHPLC-HRMS^E analysis of 12-deoxyphorbols in E. resinifera latex which yielded the detection and identification of four additional 12-deoxyphorbols not previously isolated in the initial column fractionation work. One of them, identified as 12-deoxy-16-hydroxyphorbol 20-acetate 13-phenylacetate 16-propionate (20), has not been described before. Full article

In low-molecular-weight Mn superoxide dismutase (SOD) mimics, the ligand plays a key role in tuning the reactivity of the metal center with O₂^•−. We used three ligands differing in their donor sites, flexibility and/or charge, to compare the redox properties and SOD activity of the resulting Mn complexes: 1,3-bis[(pyridin-2-ylmethyl)(propargyl)amino]propane (pypapn), 1,3-bis(pyridin-2-ylmethyleneamino)propane (py₂pn) and 1,4-bis(salicylidenamino)butane (H₂salbn). These ligands afford Mn complexes that, in aqueous solution, exist as mononuclear species [Mn(II)(pypapn)(H₂O)₂]²⁺, [Mn(II)(py₂pn)(H₂O)₂]²⁺ and [Mn(III)(salbn)(H₂O)₂]⁺. The relative reactivity of these compounds with O₂^•− at pH 7.8, [Mn(pypapn)(H₂O)₂]²⁺ > [Mn(salbn)(H₂O)₂]⁺ > [Mn(py₂pn)(H₂O)₂]²⁺, is independent of the redox potential but strongly depends on the ligand flexibility which becomes a critical feature when the reaction occurs through an inner-sphere electron-transfer mechanism. Immobilization was used to isolate and protect the catalyst from dissociation or dimerization during catalysis. [Mn(pypapn)(H₂O)₂]²⁺, with the alkyne group, was covalently grafted to azide functionalized mesoporous silica through click chemistry, while [Mn(py₂pn)(solv)₂]²⁺ and [Mn(salbn)(solv)₂]⁺ were encapsulated in SBA-15 mesoporous silica through ionic exchange. The retention or enhancement of the SOD activity and the improved stability of the covalently attached catalyst and the doubly charged complex encapsulated in the silica pores, make them suitable for use in aqueous media. Full article

In this study, we present a complete set of electron scattering cross-sections from 1-Methyl-5-Nitroimidazole (1M5NI) molecules for impact energies ranging from 0.1 to 1000 eV. This information is relevant to evaluate the potential role of 1M5NI as a molecular radiosensitizers. The total electron scattering cross-sections (TCS) that we previously measured with a magnetically confined electron transmission apparatus were considered as the reference values for the present analysis. Elastic scattering cross-sections were calculated by means of two different schemes: The Schwinger multichannel (SMC) method for the lower energies (below 15 eV) and the independent atom model-based screening-corrected additivity rule with interferences (IAM-SCARI) for higher energies (above 15 eV). The latter was also applied to calculate the total ionization cross-sections, which were complemented with experimental values of the induced cationic fragmentation by electron impact. Double differential ionization cross-sections were measured with a reaction microscope multi-particle coincidence spectrometer. Using a momentum imaging spectrometer, direct measurements of the anion fragment yields and kinetic energies by the dissociative electron attachment are also presented. Cross-sections for the other inelastic channels were derived with a self-consistent procedure by sampling their values at a given energy to ensure that the sum of the cross-sections of all the scattering processes available at that energy coincides with the corresponding TCS. This cross-section data set is ready to be used for modelling electron-induced radiation damage at the molecular level to biologically relevant media containing 1M5NI as a potential radiosensitizer. Nonetheless, a proper evaluation of its radiosensitizing effects would require further radiobiological experiments. Full article

When modified uridine derivatives are incorporated into DNA, radical species may form that cause DNA damage. This category of molecules has been proposed as radiosensitizers and is currently being researched. Here, we study electron attachment to 5-bromo-4-thiouracil (BrSU), a uracil derivative, and 5-bromo-4-thio-2′-deoxyuridine (BrSdU), with an attached deoxyribose moiety via the N-glycosidic (N1-C) bond. Quadrupole mass spectrometry was used to detect the anionic products of dissociative electron attachment (DEA), and the experimental results were supported by quantum chemical calculations performed at the M062X/aug-cc-pVTZ level of theory. Experimentally, we found that BrSU predominantly captures low-energy electrons with kinetic energies near 0 eV, though the abundance of bromine anions was rather low compared to a similar experiment with bromouracil. We suggest that, for this reaction channel, proton-transfer reactions in the transient negative ions limit the release of bromine anions. Full article

Metal nanoparticles are considered as highly promising radiosensitizers in cancer radiotherapy. Understanding their radiosensitization mechanisms is critical for future clinical applications. This review is focused on the initial energy deposition by short-range Auger electrons; when high energy radiation is absorbed by gold nanoparticles (GNPs) located near vital biomolecules; such as DNA. Auger electrons and the subsequent production of secondary low energy electrons (LEEs) are responsible for most the ensuing chemical damage near such molecules. We highlight recent progress on DNA damage induced by the LEEs produced abundantly within about 100 nanometers from irradiated GNPs; and by those emitted by high energy electrons and X-rays incident on metal surfaces under differing atmospheric environments. LEEs strongly react within cells; mainly via bound breaking processes due to transient anion formation and dissociative electron attachment. The enhancement of damages induced in plasmid DNA by LEEs; with or without the binding of chemotherapeutic drugs; are explained by the fundamental mechanisms of LEE interactions with simple molecules and specific sites on nucleotides. We address the major challenge of metal nanoparticle and GNP radiosensitization; i.e., to deliver the maximum local dose of radiation to the most sensitive target of cancer cells (i.e., DNA). To achieve this goal the emitted electrons from the absorbed high energy radiation must be short range, and produce a large local density of LEEs, and the initial radiation must have the highest possible absorption coefficient compared to that of soft tissue (e.g., 20–80 keV X-rays). Full article

The adsorption of silicon tetrachloride (STC, SiCl₄) on the silicon surface is a crucial process in polysilicon manufacture. However, the underlying mechanism for the adsorption remains highly uncertain. Here, new dissociative adsorption (DA) reaction pathways involving a flip of a silicon dimer in the first layer and considering physisorption are identified. Different DA patterns, inter-row (IR), inter-dimer (ID), and on-dimer (OD), are confirmed by the density functional theory (DFT) calculations at the PBE-D3(BJ)/TZVP-MOLOPT-GTH level. The stable structures for all minima are searched by global optimization through the artificial bee colony (ABC) algorithm. Findings reveal that the parent molecules dissociate first by breaking one Si-Cl bond, following which the resulting SiCl₃ and Cl fragments are attached to adjacent Si-atom sites. Moreover, dimer flipping significantly reduces the energy barrier for chemisorption, mainly due to the change in electronic structure that enhances the interaction of the site with the SiCl₃ radical. Physisorption may also be accompanied by dimer flipping to form a stable adsorption structure. Full article

Rho–associated protein kinase (ROCK) inhibitors are used for the survival of single-dissociated human induced pluripotent stem cells (hiPSCs); however, their effects on the growth behaviors of hiPSCs in suspension culture are unexplored. Therefore, we investigated the effect of ROCK inhibitor on growth behaviors of two hiPSC lines (Tic and 1383D2) with different formation of aggregate that attached between single cells in suspension culture. The apparent specific growth rate by long-term exposure to Y-27632, a ROCK inhibitor, was maintained throughout the culture. Long-term exposure to ROCK inhibitor led to an increase in cell division throughout the culture in both lines. Immunofluorescence staining confirmed that hiPSCs forming spherical aggregates showed localization of collagen type I on its periphery. In addition, phosphorylated myosin (pMLC) was localized at the periphery in culture under short-term exposure to ROCK inhibitor, whereas pMLC was not detected at whole the aggregate in culture under long-term exposure. Scanning electron microscopy indicated that long-term exposure to ROCK inhibitor blocked the structural alteration on the surface of cell aggregates. These results indicate that pMLC inhibition by long-term ROCK inhibition leads to enhanced growth abilities of hiPSCs in suspension culture by maintaining the structures of extracellular matrices. Full article

Dissociative electron attachment has shown site selectivity in aliphatic molecules based on the functional groups present in them. This selectivity arises from the core excited resonances that have excited parent states localized to a specific site of the functional group. Here, we show that such site selectivity is also observed in the amine group when present in aromatic molecules. However, the proximity of the aromatic ring to the functional group under investigation has a substantial effect on the dissociation dynamics. This effect is evident in the momentum distribution of the hydride ions generated from the amine group. Our results unravel the hitherto unknown facets of the site selectivity in aromatic organic molecules. Full article

Ni(CO)₄, Cr(CO)₆, Co(CO)₃NO are some of the most common precursors used for focused electron beam induced deposition. Some of the compounds, even though extensively used have high requirements when it comes to handling being, explosives, highly flammable and with high toxicity levels, as is the case of Ni(CO)₄. We are employing simulations to determine values hard to determine experimentally, and compare them with DFT calculations and experimental data where available. The use of Quantemol-N cross section simulations for dissociative electron attachment (DEA) at low electron energy in the range of 0–20 eV, gives valuable information on the fragmentation of the molecules, based on their bond dissociation energies, electron affinities and incident electron energies. The values obtained for the cross sections are 0.12 × 10⁻¹⁸ cm² for Ni(CO)₄, 4.5 × 10⁻¹⁶ cm² for Co(CO)₃NO DEA cross-sections and 4.3 × 10⁻¹⁵ cm² for Cr(CO)₆. Full article

The pharmaceutical success of atorvastatin (ATV), a widely employed drug against the “bad” cholesterol (LDL) and cardiovascular diseases, traces back to its ability to scavenge free radicals. Unfortunately, information on its antioxidant properties is missing or unreliable. Here, we report detailed quantum chemical results for ATV and its ortho- and para-hydroxy metabolites (o-ATV, p-ATV) in the methanolic phase. They comprise global reactivity indices, bond order indices, and spin densities as well as all relevant enthalpies of reaction (bond dissociation BDE, ionization IP and electron attachment EA, proton detachment PDE and proton affinity PA, and electron transfer ETE). With these properties in hand, we can provide the first theoretical explanation of the experimental finding that, due to their free radical scavenging activity, ATV hydroxy metabolites rather than the parent ATV, have substantial inhibitory effect on LDL and the like. Surprisingly (because it is contrary to the most cases currently known), we unambiguously found that HAT (direct hydrogen atom transfer) rather than SPLET (sequential proton loss electron transfer) or SET-PT (stepwise electron transfer proton transfer) is the thermodynamically preferred pathway by which o-ATV and p-ATV in methanolic phase can scavenge DPPH${}^{•}$ (1,1-diphenyl-2-picrylhydrazyl) radicals. From a quantum chemical perspective, the ATV’s species investigated are surprising because of the nontrivial correlations between bond dissociation energies, bond lengths, bond order indices and pertaining stretching frequencies, which do not fit the framework of naive chemical intuition. Full article