Search Results (2,455)

This study systematically investigated the durability of low-carbon concrete under severe service conditions using industrial solid wastes. The mechanical properties and carbonation resistance (including carbonation depth, compressive strength after carbonation, and splitting tensile strength after carbonation) were tested. Multi-scale characterization techniques, including XRD, SEM-EDS, and nanoindentation, were employed to investigate the microstructure. This approach revealed a synergistic mechanism linking microstructural evolution to the concrete’s macroscopic mechanical and durability performance. Results showed that incorporating 25% fly ash (FA) reduced compressive strength by 11.30% and 11.39% in CF-25 and BF-25 mixes, respectively, and increased carbonation depth by 58.46% in CF-25. In contrast, the addition of 5% silica fume (SF) produced different effects. It significantly enhanced the compressive strength of the CS-5 and BS-5 mixes by 18.92% and 9.94%, respectively. Furthermore, it improved the micromechanical properties of the interfacial transition zone (ITZ) and reduced its thickness. Micro-mechanistic analysis revealed that the low pozzolanic activity of FA at early ages led to insufficient hydration products, higher porosity, and a weaker ITZ. Conversely, SF, through its high pozzolanic reactivity and nano-filling effect, promoted a dense, highly polymerized gel structure and optimized pore size distribution. The distinct chemical characteristics of high-calcium and low-calcium cementitious systems further amplified the differential effects of these supplementary materials. Full article

Nitrogen applied in excess of plant demand in intensive agricultural systems can be lost through runoff and leaching into surface and groundwater, with potentially negative effects on water quality. Zeolites, due to their high cation exchange capacity and internal porosity, can adsorb ammonium (${NH}_4^{+}$) and help mitigate excessive nitrate (${NO}_3^{-}$) leaching. Owing to such properties, zeolites can play an important role in reducing the potential negative impact associated with the extensive use of nitrogen-based fertilizers. In this study, we investigated the effects of two commercial natural zeolites on selected hydraulic properties, water storage, and solute transport parameters of three sandy-loam soils with different pedological characteristics. Laboratory experiments were conducted on disturbed soil columns. The leaching of ${NO}_3^{-}$ and ${NH}_4^{+}$ ions was monitored using ion-selective electrode analysis. The results indicate that zeolite application reduces the mobility of nitrate and ammonium. This effect can be attributed to changes in the original pore size distribution of the investigated soils, characterized by a reduction in macropore regions and a corresponding increase in meso- and micropore regions. In the case of ammonium, adsorption mechanisms are also involved, which further contribute to retarding its mobility. These effects were consistently observed across the investigated soils. For a given soil, the magnitude of the observed effects depended on both the type of zeolite used and the amount of zeolite mixed with the soil. Finally, ANOVA tests and multivariate analyses were applied to the full dataset to provide statistical support for the observed changes in the selected parameters. Full article

The sealing behavior of fracture-filling minerals in the near-field of the deep geological repository (DGR) is critical for the safe disposal of high-level radioactive waste (HLW). In granite host rocks, natural fractures are often filled with polymineralic assemblages of calcite, quartz, and clay minerals; however, their coupled compaction–pressure solution mechanisms under thermal–hydraulic–mechanical–chemical (THMC) conditions remain poorly understood. In this study, 12 fracture sealing tests were conducted on Beishan granite and its typical fracture fillings at 90 °C and 15 MPa effective stress, using different pore fluids and systematically varying grain size (75–250 μm), mineral proportions, and clay content. The results indicate that stress-assisted dissolution–precipitation of calcite in saturated CaCO₃ solution is a key process contributing to porosity reduction and chemo-mechanical densification of the fracture filling, achieving a compaction strain of 24.6%—substantially higher than those obtained in deionized water (20.6%) and under dry conditions (14.8%). Fine-grained calcite compacts more effectively than its coarse-grained counterpart, reaching a porosity as low as 4.8%; rigid quartz locally redistributes contact stress at quartz–calcite interfaces, promoting preferential deformation or dissolution of adjacent calcite, although increasing quartz abundance reduces the bulk compaction efficiency. A moderate amount of clay minerals (~20 wt%) further reduces porosity to 2.1% through lubrication and micropore filling. The study reveals a multi-stage process transitioning from mechanical compaction to chemo-mechanical sealing, and a synergistic mechanism dominated by calcite compaction–pressure solution, augmented by quartz stress redistribution and clay lubrication. These findings provide direct experimental evidence for the progressive chemo-mechanical densification of mineral-filled granite fractures, and offer quantitative constraints for long-term THMC modeling of fracture sealing behavior in HLW repositories. Full article

This study investigates the effect of mineral additives of different natures, namely blast-furnace slag, fly ash, and bentonite, on structure formation, phase composition, microstructure, and physicomechanical properties of cement matrices. The analysis included measurements of mass change and linear shrinkage during hardening, determination of density and microhardness, X-ray phase analysis, and microstructural examination by scanning electron microscopy. It was found that the introduction of mineral additives reduced linear shrinkage from 6.06 mm for the control composition to 0.25 mm for the composition with blast-furnace slag, 2.31 mm for the composition with fly ash, and 1.01 mm for the composition with bentonite. The maximum density and microhardness values were obtained for the matrix with blast-furnace slag and amounted to 1.99 ± 0.03 g/cm³ and 39.95 ± 1.12 HV1, respectively, whereas the overall range of values for the investigated compositions was 1.52–1.99 g/cm³ and 30.2–39.95 HV1. X-ray phase analysis showed that the amorphous component varied from 61 to 78%, reaching its maximum value in the composition with blast-furnace slag, which is associated with the formation of poorly crystalline C–S–H and aluminosilicate phases. According to the SEM data, the average size of visible pore-like defects was 2.4 μm for the control composition, 1.4 μm for the composition with blast-furnace slag, 1.3 μm for the composition with fly ash, and 1.7 μm for the composition with bentonite. The most favorable combination of high density, microhardness, developed amorphous component, and homogeneous microstructure was established for the composition with blast-furnace slag. The obtained results can be used as a materials-science basis for the development of cement matrices intended for further studies on the immobilization of solid radioactive waste. Full article

The relationship between pore structure heterogeneity in tight sandstone reservoirs and their fractal characteristics is well documented. However, the impact of differential diagenesis across lithofacies on pore-throat structure and fractal properties remains unclear. In this study, we investigate the Carboniferous Benxi Formation in the Ordos Basin using a suite of experiments to characterize pore-throat structure and multifractal behavior, and to assess the influence of diagenesis. The results reveal significant differences among lithofacies in mineral composition, pore types, pore throat structure, fractal dimensions, and petrophysical properties, primarily attributed to variations in sedimentary environments and diagenesis. Fractal characteristics were quantified by converting the T₂ spectra into pore-throat size distributions. Macropores exhibit the highest fractal dimensions, indicating the greatest structural complexity and heterogeneity, followed by mesopores, whereas micropores show the lowest heterogeneity (D₃ > D₂ > D₁). Quartz content mainly controls the fractal properties of macropores by enhancing structural stability, whereas clay minerals govern the fractal behavior of micropores and mesopores by increasing pore-throat complexity. High-energy depositional conditions promote sediment transportation and sorting, leading to quartzarenite lithofacies (QL) and sublitharenite lithofacies (SL) with lower fractal dimensions, more uniform pore structures, and better connectivity. In contrast, feldspathic litharenite lithofacies (FL) and litharenite lithofacies (LL) exhibit higher fractal dimensions due to stronger compaction, reduced primary porosity, and higher clay content, resulting in poorer reservoir quality. This study improves understanding of pore structure heterogeneity in tight sandstones and provides useful insights for predicting high-quality reservoirs in similar geological settings. Full article

Carbon nano-onions (CNOs) were synthesized at ambient conditions using the wick-pyrolysis technique with ghee as a precursor. A high-purity copper substrate produced unique CNOs, differing from those obtained with other metals. To purify the nanoparticles, they underwent treatment with a solvent mixture of acetone and deionized water or were pyrolyzed at 1000 °C under nitrogen without a catalyst. Various characterization techniques, including X-ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM), High-Resolution Transmission Electron Microscopy (HR-TEM), and Raman Spectroscopy, confirmed the successful formation of CNOs. Energy Dispersive Spectroscopy (EDS) and Elemental analysis (CHN) indicated the presence of oxygen in treated CNOs. X-ray photoelectron spectroscopy (XPS) revealed binding energies linked to C-O and C=O bonds. The average particle size was found to be 30–50 nm, with some agglomeration in pyrolyzed samples. A significant increase in surface area from 79.7 m²/g to 261.8 m²/g was observed, along with changes in pore radius and volume via Brunauer–Emmett–Teller (BET) analysis. Water contact angles on the CNO surface were measured at 125° and 138°, indicating hydrophobicity. Electrochemical tests on CNO-based composite electrodes yielded a specific capacitance of 109.7 F/g with 96% capacity retention over 5000 cycles. Full article

Extrusion-based three-dimensional food printing requires inks that can be smoothly extruded while maintaining sufficient structural stability after deposition. In this study, gelatin and κ-carrageenan were first mixed and then subjected to post-mixing pH regulation before spray drying, producing composite powders with different structural states. These powders were incorporated into yellow peach pulp gels to prepare fruit-based printing inks, and their printing performance, extrusion behavior, mechanical properties, particle-size distribution, and microstructure were systematically evaluated. The results showed that the structural state formed during gelatin–κ-carrageenan powder preparation was closely associated with the extrusion stability and shape retention of the final inks. Among the tested formulations, the ink prepared with gelatin–κ-carrageenan powder pre-regulated to pH 4.0 exhibited the best overall printability. Although its pore-area fidelity was slightly lower than that of the sample pre-regulated to pH 3.5, it produced more stable multilayer cylinders and better-defined lattice structures. In addition, the pH 4.0 sample showed the lowest and most stable extrusion force and the highest Young’s modulus, indicating a favorable balance between extrusion flowability and post-deposition support. Microstructural observations and particle-size analysis suggested that pH regulation altered the aggregation state and local morphology of the gelatin–κ-carrageenan system. Samples prepared at higher pH values tended to form larger and less uniform aggregates, which was unfavorable for stable extrusion and shape retention. Overall, post-mixing pH regulation of gelatin–κ-carrageenan provides a practical strategy for improving the printing-related properties of fruit-based gel inks. Full article

Wilsonosaura Lehr, Moravec, Von May, 2020, was described as a monotypic genus from central Peru, based on genetic and morphological characters. This genus is easily distinguished from other lizards in the gymnophthalmid subfamily Cercosaurini, except for Proctoporus, by the presence of an undivided translucent lower palpebral disk, weakly keeled dorsal scales, and the absence of preanal pores. Morphological synapomorphies to distinguish Wilsonosaura and Proctoporus have not been identified. Consequently, differentiation of both genera continues to require molecular analysis. We describe a new species of Wilsonosaura based on morphological and DNA sequence data and extend the geographic distribution of this genus by 88.53 km to the southeast of Ayacucho, Peru, from the nearest known record to date. The new species is known only from the Ayacucho Department, Huamanga and Huanta Provinces, in the eastern Andes, between 2674 and 2800 m a.s.l., where it inhabits humid areas along riverbanks, urban areas, and farming areas and can be found under rocks, logs, and urban buildings. Wilsonosaura sp. nov. can be distinguished from W. josyi by the absence of fusion of the first superciliary and first supraocular scales, a lower count of scales in the mid-body, a higher scale row count on the side of the neck, a smaller size, and a different coloration pattern. Full article

The recycling of polyethylene terephthalate (PET) is gaining increasing importance, as it enables the conversion of plastic waste into valuable raw materials and contributes to a circular economy. Recent research has primarily focused on optimizing the depolymerization step of PET glycolysis, while downstream processes often overlook what are at least equally critical downstream steps in recovering the monomer bis(2-hydroxyethyl) terephthalate (BHET). The implementation of a water-free PET glycolysis process eliminates challenges related to internal solvent and homogeneous catalyst recycling that commonly occur in conventional processes. This study, therefore, focuses on BHET crystallization and filtration as key downstream unit operations. Two nucleation strategies, gassing and seeding, were investigated and compared with experiments without a nucleation strategy. The aim was to achieve reproducible process control during crystallization and to obtain crystals with good filterability, which can be critical for subsequent steps in the product purification process. Experiments without a nucleation strategy showed poor reproducibility. In contrast, gassing and seeding improved crystallization control, particularly regarding nucleation temperature and relative crystallization yield. However, these strategies also resulted in significantly prolonged filtration times due to differences in filter cake properties. The anisotropic crystals exhibited a broad particle size distribution with a high fraction of fine particles, leading to small and heterogeneous pores in the filter cake. Limited crystal growth was identified as the main cause of the unfavorable filtration behavior. Full article

The deep marine shale of the Wufeng–Longmaxi (WF–LMX) Formation in the Sichuan Basin is characterized by laterally continuous thickness, high porosity, and significant gas content, making it a representative shale reservoir with considerable resource potential. This study investigates the heterogeneity of pore structures and their controlling factors using shale samples from three representative wells, based on low-temperature nitrogen adsorption and mercury intrusion data. The reservoir can be classified into three main lithofacies: mixed siliceous shale (MSS), clay-rich siliceous shale (CSS), and siliceous clay mixed shale (SMS). The results show that siliceous shales (MSS and CSS) exhibit higher total organic carbon and quartz contents, with more developed pore systems. Among them, the CSS exhibits the highest specific surface area and the largest mesopore and macropore volumes, indicating a greater development of larger pores and superior reservoir quality. All three shale facies exhibit clear single and multifractal characteristics. The average D₁ and D₂ values (fractal dimensions from nitrogen adsorption at P/P₀ < 0.45 and >0.45, respectively) are higher than D_Hg, (fractal dimension from mercury intrusion), indicating greater pore-surface roughness than internal pore structure complexity and stronger heterogeneity in larger pores. The D(q)–q spectrum shows a left-wide/right-narrow pattern, whereas the α–f(α) spectrum exhibits the opposite trend. The branch-width ratios S_kd and S_ka (indices of pore-size distribution complexity and heterogeneity) are both <0.1, suggesting that heterogeneity is more pronounced in low-probability regions. Fractal and multifractal analyses reveal significant pore structure heterogeneity across different lithofacies, with CSS showing relatively more homogeneous pore structures, whereas MSS exhibits stronger heterogeneity and poorer connectivity. The heterogeneity of shale reservoirs is primarily controlled by pore development, especially micropores and mesopores, and is strongly influenced by total organic carbon and quartz content. Full article

Capillary imbibition is the process by which liquids are absorbed into porous materials as a result of capillary pressure differences at the pore scale. Accurate characterization of imbibition dynamics, particularly in the presence of gravitational potential, is essential for understanding fluid transport in diverse systems such as soil, fractured rocks, filtration media, and plant roots. This study presents systematic imbibition experiments using filter papers with pore sizes of 2.5 µm, 11 µm, and 20 µm, each inclined at 80° to quantify the influence of gravitational potential on imbibition behavior. For horizontally positioned samples, the imbibition front propagated radially and symmetrically, exhibiting a power law dependence on time. The measured temporal exponents ranged from 0.386 to 0.403, consistently lower than the theoretical value of 1/2 predicted by the Lucas–Washburn law. With increasing permeability, the temporal exponent approached the Washburn limit, indicating a marked dependence of imbibition dynamics on pore structure. For the inclined configuration at an 80° angle, the imbibition fronts remained nearly circular but exhibited a pronounced displacement of the front center toward gravity. This displacement increased with permeability, from approximately 0.497 cm for the 11 µm filter paper to 3545 cm for the 20 µm filter paper, highlighting the combined effects of permeability and gravitational potential on fluid movement. Furthermore, the advance of the imbibition front was significantly slower in the smallest pores (2.5 µm) compared to the larger ones. Experimental results were evaluated against a theoretical model proposed by Medina, demonstrating moderate quantitative agreement at early times, when gravitational potential effects are less significant. These findings confirm that both the temporal scaling exponent and the spatial evolution of the imbibition front are governed by the porous medium’s permeability and inclination angle, providing experimental evidence of deviations from ideal Washburn behavior in real porous systems. Full article

Sustainable management of industrial solid waste is critical for a circular economy. This study presents a novel approach for valorizing blast furnace slag (BFS) into NaA zeolite through selective acetic acid leaching followed by hydrothermal crystallization. The leaching step selectively extracts Ca²⁺ and Mg²⁺ while efficiently retaining silicon and aluminum in the solid residue, producing a reactive aluminosilicate precursor that facilitates zeolite nucleation and growth. The effects of the silicon-to-aluminum molar ratio (n(Si)/n(Al)), crystallization temperature, and duration on the phase evolution and morphology were systematically investigated. The results demonstrate that phase-pure NaA zeolite with high crystallinity and a uniform cubic morphology can be obtained from precursor gels with n(Si)/n(Al) ratios of 0.5–1.25. Optimal synthesis conditions were identified as n(Na):n(Si):n(Al):n(H₂O) = 6:1:1:240 at 373 K for 8 h. The resulting zeolites exhibit a BET specific surface area of 52.1 m²/g, a micropore volume of 0.016 cm³/g, an average adsorption pore size of 4.7 nm, and an external specific surface area of 12.8 m²/g. It achieved near-complete removal of Cu²⁺ and high adsorption efficiencies for Pb²⁺ (77.78%) and Ni²⁺ (71.79%) from 250 mg/L solutions at 298 K with a dosage of 4.0 g/L, following the affinity sequence Cu²⁺ > Pb²⁺ > Ni²⁺, with all pairwise differences statistically significant at p < 0.001, using one-way ANOVA and Tukey’s HSD tests. The adsorption of three metal ions was most accurately described by the Freundlich isotherm and pseudo-second-order kinetic models, indicating heterogeneous multilayer chemisorption. The theoretical maximum monolayer adsorption capacities (q_max) were 307.67 mg/g for Cu²⁺, 246.09 mg/g for Pb²⁺, and 173.79 mg/g for Ni²⁺, whereas the kinetic equilibrium adsorption capacities (q_e) reached 62.69, 48.85 and 41.69 mg/g, respectively. This study demonstrates a value-added strategy for valorizing BFS into a micro-mesoporous adsorbent, advancing both circular resource utilization and environmental remediation. Full article

Sand grain size strongly influences the physical and hydraulic behaviour of sandy soils, particularly water retention, pore distribution, and water movement under unsaturated conditions. This study evaluated the effect of five sand grain-size classes, ranging from very coarse to very fine, on pore distribution, aeration, water retention, and unsaturated hydraulic conductivity. Quartz sand samples with different particle sizes were saturated and subjected to matric tensions ranging from 10 to 15,000 hPa. Very fine sand (0.053–0.106 mm) showed the highest field capacity (0.38 m³ m⁻³) and available water content (0.30 m³ m⁻³), which were associated with a predominance of pores between 0.2 and 3 μm in diameter. In contrast, coarser sand fractions were dominated by macropores (>50 μm) and exhibited lower water retention. Permanent wilting point values remained low and similar among grain-size classes (≈0.02 m³ m⁻³). Under unsaturated conditions (matric tensions > 100 hPa), very fine sand exhibited hydraulic conductivity values up to ten times greater than those of coarser fractions. Overall, decreasing sand particle size increased water retention and plant-available water while reducing macroporosity and aeration capacity. These findings demonstrate that sand grain-size distribution plays a major role in regulating water dynamics in sandy soils and may support the development of more efficient irrigation and soil management strategies to improve water conservation and plant water availability in drought-prone environments. Full article

The atypical proliferation of Sargassum (Sargassum spp.) in the tropical Atlantic and the Caribbean Sea over the past decade has triggered an unprecedented environmental and socioeconomic crisis along the Mexican coastline. Continuous beaching events of this macroalga on the Riviera Maya have caused coastal ecosystem degradation, severe impacts on the tourism sector, toxic gas emissions during decomposition, and high cleanup costs. To address this challenge, the valorization of Sargassum as a raw material for synthesizing functional materials represents a sustainable management strategy. In this study, a superabsorbent hydrogel was developed from Sargassum biomass (collected in Cancún, Quintana Roo, in 2025) using an innovative process that bypasses the conventional cellulose isolation step. The biomass was subjected to high-energy milling (15 and 30 min) to prepare Sargassum powder, which was subsequently carboxymethylated using monochloroacetic acid. This modified biomass was then crosslinked with citric acid, a process evaluated at three different citric acid/carboxymethylated Sargassum mass ratios. The hydrogel synthesized with the lowest crosslinking agent ratio achieved a maximum water absorption capacity of 1160 wt%, a value that exceeds the typical absorption capacities of 700–900% for biopolymer hydrogels. Successful material formation was confirmed by Fourier transform infrared spectroscopy (FTIR), which revealed the characteristic functional groups of CMC and the ester bonds formed during crosslinking. Additionally, scanning electron microscopy (SEM) analysis showed a well-defined porous structure with pore sizes ranging from 8.5 to 19.5 µm, which is essential for its high absorption performance. This study demonstrates the feasibility of producing high performance hydrogels from Sargassum through a simplified, cost-effective, and environmentally friendly process. These findings open a promising avenue for the integrated management of this problematic biomass, transforming it into value-added materials with potential applications in agriculture, hygiene, and environmental remediation. Full article

Coal liquefaction residues (CLRs), including both indirect (ICLR) and direct (DCLR) variants, represent industrial by-products whose conventional landfill disposal raises environmental concerns. This study comparatively analyzes ICLR and DCLR properties against limestone fine aggregates through physicochemical characterization. Results indicate that ICLR contains predominant SiO₂ crystalline phases (50.05%) with trace Fe-Ti-Al-Mg oxides, demonstrating higher Vickers hardness (615 HV vs. 246 HV for limestone) and elastic modulus (98 GPa vs. 81 GPa for limestone), while its apparent relative density (2.612) closely matches that of limestone (2.783). Conversely, DCLR features abundant carbonaceous components (75.9% C) with olefinic/aromatic structures (asphaltene content 66.2%), exhibiting lower mechanical strength (Vickers hardness 21 HV) but enhanced asphalt affinity, as indicated by strong C=C (1591 cm⁻¹) and aromatic C–H (744 cm⁻¹) absorption peaks in FTIR. Both CLRs share comparable gradation curves and micromorphological characteristics with limestone aggregates, including uniform surface scaly textures. While pore-size distributions differ minimally between CLRs, both present finer porosity than limestone and show no leachate toxicity risks, confirming their viability as sustainable alternatives to asphalt fine aggregates. Full article