Search Results (1,094)

Background and Objectives: Surgical smoke generated by energy devices during surgery contains hazardous substances and poses health risks to staff in the operating room. Exposure to surgical smoke must be reduced to minimize the risk of health hazards. Many studies have evaluated surgical smoke qualitatively, but few have performed quantitative assessment. The aim of this study was to quantify the number of particles generated during various breast surgery procedures. Materials and Methods: In this prospective, randomized study, breast surgeries performed at Tokyo Medical and Dental University Hospital (the present Institute of Science Tokyo Hospital) between December 2022 and August 2023 were randomly assigned to two groups: the electrosurgical device group and the electrosurgical device with smoke evacuator group. The number of particles generated by energy devices during surgery was measured using a particle counter. Results: Surgical smoke was generated in all procedures. The number of measured particles was significantly less in the electrosurgical device with smoke evacuator group than in the electrosurgical device group during all procedures (all p < 0.001). Conclusions: All breast surgery procedures produced a significant amount of surgical smoke, which was effectively reduced by using an electrosurgical device with a smoke evacuator. These findings support the routine use of smoke evacuators in breast surgery to reduce occupational exposure to hazardous particles. Implementation of such devices could improve operating room safety and may inform future guidelines and institutional policies regarding surgical smoke management. Full article

Background: Childhood cancer is considered one of the main causes of mortality and morbidity worldwide. There is strong evidence of the oral toxic effects of oncologic treatments, but their incidence is difficult to determine. The novel therapeutic strategies in Pediatric Oncology have led to increased survival in this population, resulting in an increased incidence of long-term effects, which diminish the patient’s quality of life. Methods: The search for articles started on 5 November 2024 and ended on 5 December 2024. Following the PRISMA Statement, a total of 1266 articles were obtained, from which 13 were selected for review. All articles were considered to be of high quality. The antineoplastic treatments used in them were chemotherapy, radiotherapy, surgery and immune therapy. Results: Most articles were cohorts and case controls. Only one case report was obtained. The results revealed that the most prevalent sequelae in the pediatric population after antineoplastic treatment were enamel alterations, microdontia, dental caries, periodontal disease, gingivitis, hyposalivation, alteration of the oral microbiome, alteration of mandibular bone density and malocclusion. The lesions are different depending on the therapy used. Conclusions: Oncologic treatments in children with cancer cause multiple oral sequelae such as microdontia, dental caries, enamel alterations, salivary gland alterations, mucositis and root resorption. It cannot be concluded which therapy has the most detrimental effect as each has a different mechanism of action in the oral cavity. Full article

Background: Midfacial fractures are common outcomes of facial trauma. While younger individuals typically sustain these injuries through high-energy events like assaults and traffic or sports accidents, elderly patients increasingly present with fractures from low-energy mechanisms, primarily falls. Purpose: The aim of this study was to analyze age- and gender-specific patterns in midfacial fractures over a 10-year period, with emphasis on elderly individuals and low-energy trauma. Methods: A retrospective review was performed of proven midfacial fractures between 2013 and 2022 at the Department of Oral and Maxillofacial Surgery (University of Pécs, Hungary). The patients were stratified by age (<65 vs. ≥65 years) and gender. The variables included the injury mechanism, fracture localization, the dental status, hospitalization, and the presence of associated injuries. Bivariate analyses were performed, and the significance level was set to p < 0.05. Results: A total of 957 radiologically confirmed midfacial fracture cases were evaluated, of whom 344 (35.9%) were ≥65 years old. In the elderly group, females had a 19-fold higher risk for midfacial trauma than younger females (OR: 19.1, 95%CI: 9.30–39.21). In the older group, a fall was significantly the most frequent injury mechanism (OR: 14.5; 95%CI: 9.9–21.3), responsible for 89.5% of the cases, while hospitalization (OR: 0.36; 95%CI: 0.23–0.56) was less characteristic. Most of the fractures occurred in the zygomatic bone, in the zygomaticomaxillary complex, or in the anterior wall of the maxilla. Associated injuries in the elderly group included mostly lower limb injuries—particularly pertrochanteric femoral fractures in females—and upper limb injuries, with a slight male dominance. Conclusions: Low-energy falls are the primary cause of midfacial fractures in elderly patients, particularly in women. Tailored prevention and management strategies are essential for improving the outcomes in this growing demographic group. Full article

Orthognathic surgery (OS) is a complex procedure commonly used to treat dentofacial deformities (DFDs). These conditions, related to jaw position or size and often involving malocclusion, affect approximately 15% of the population. Due to the complexity of OS, accurate planning is essential. Digital assessment using computer-aided design (CAD) and computer-aided manufacturing (CAM) tools enhances surgical predictability. However, limitations in soft tissue simulation often require surgeon input to optimize aesthetic results and minimize surgical impact. This study aimed to evaluate the accuracy of virtual surgery planning (VSP) by analyzing the relationship between planning deviations and surgical satisfaction. A single-center, retrospective study was conducted on 16 patients who underwent OS at San Pedro University Hospital of La Rioja. VSP was based on CT scans using Dolphin Imaging software (v12.0, Patterson Dental, St. Paul, MN, USA) and surgeries were guided by VSP-designed occlusal splints. Outcomes were assessed using the Orthognathic Quality of Life (OQOL) questionnaire and deviations were measured through pre- and postoperative imaging. The results showed high satisfaction scores and good overall outcomes, despite moderate deviations from the virtual plan in many cases, particularly among Class II patients. A total of 63% of patients required VSP modifications due to poor soft tissue fitting, with 72% of these being Class II DFDs. Most deviations involved less maxillary advancement than planned, while maintaining optimal occlusion. This suggests that VSP may overestimate advancement needs, especially in Class II cases. No significant differences in satisfaction were observed between patients with low (<2 mm) and high (>2 mm) deviations. These findings support the use of VSP as a valuable planning tool for OS. However, surgeon experience remains essential, especially in managing soft tissue behavior. Improvements in soft tissue prediction are needed to enhance accuracy, particularly for Class II DFDs. Full article

Objectives: This pilot study evaluates the correlation between periodontal pocket depth (PPD) measurements obtained by manual probing and those derived from an AI-coupled ultrasound imaging device in periodontitis patients. Materials and Methods: Thirteen patients with periodontitis underwent ultrasonic probing with an AI engine for automated PPD measurements, followed by routine manual probing. Results: A total of 2088 manual and 1987 AI-based PPD measurements were collected. The mean PPD was 4.2 mm (range: 2–8 mm) for manual probing and 4.5 mm (range: 2–9 mm) for AI-based ultrasound, with a Pearson correlation coefficient of 0.68 (95% CI: 0.62–0.73). Discrepancies were noted in cases with inflammation or calculus. AI struggled to differentiate pocket depths in complex clinical scenarios. Discussion: Ultrasound imaging offers non-invasive, real-time visualization of periodontal structures, but AI accuracy requires further training to address image artifacts and clinical variability. Conclusions: The ultrasound device shows promise for non-invasive periodontal diagnostics but is not yet a direct alternative to manual probing. Further AI optimization and validation are needed. Clinical Relevance: This technology could enhance patient comfort and enable frequent monitoring, pending improvements in AI reliability. Full article

Background: Stable post-surgical wound healing surrounding teeth and dental implants is essential for achieving excellent clinical outcomes, both during the initial phases of treatment and over the long term. Objectives: This work follows the new emerging trend of case-based literature reviews. The aim of this review includes providing clinical findings from case series that demonstrate the efficacy of using blue^®m oxygen treatment to promote post-surgical wound healing in patients that underwent periodontal and dental implant surgeries. In addition, a systematic review of the literature aimed to answer the focused research question: “In periodontal and implant surgeries, what are the aftercare protocols used to maintain optimal wound healing?” Case Presentation: One clinical case report involved the presentation of complex periodontal surgery. The other two cases focused on advanced implant surgeries. All patients were treated post-surgically with the local application of an oxygen-based therapy (blue^®m) gel. This therapy was further emphasized during the wound-healing phase by instructing patients to maintain thorough dental hygiene using toothpaste and mouthwash containing a similar oxygen-release formulation (blue^®m). Patients achieved satisfactory treatment outcomes. Systematic Review: PubMed and EMBASE were used in order to search for relevant studies in the scientific literature published up until June 2025. Only human clinical studies that used a specific protocol in regard to aftercare wound healing after periodontal or dental implant surgeries were included. As a result, 27 clinical studies were included. The outcome data were categorized and summarized. Conclusions: The use of local oxygen-based therapy showed a positive effect as a conventionally used aftercare modality in maintaining optimal post-surgical wound healing, following periodontal and implant surgeries. Further clinical studies are needed. Full article

Bcakground: The deepithelialized free gingival graft (DGG) technique provides high-quality connective tissue grafts (CTGs) with predictable outcomes for recession coverage. This study evaluates a novel method of free gingival graft (FGG) deepithelialization using an Er,Cr:YSGG laser (LDEE) for treating multiple gingival recessions. Methods: A split-mouth study was conducted on 46 (n = 46) recessions in nine patients (23 per test and control group). Sites were randomized. Full-thickness palatal grafts were harvested with a scalpel. In the test group (LDEE), deepithelialization was performed extraorally using an Er,Cr:YSGG laser (2780 nm; 2.5 W, 83.3 mJ, 30 Hz, 600 µm tip). In the control group (DEE), a 15c scalpel was used. All CTGs were applied using the modified coronally advanced tunnel (TUN) technique. Clinical parameters—recession depth (RD), keratinized tissue width (KT), gingival thickness (GT), pocket depth (PD), clinical attachment loss (CAL), pink esthetic score (PES), approximal plaque index (API), mean root coverage (MRC), and complete root coverage (CRC)—were assessed at baseline (T0), 3 months (T1), and 6 months (T2). Results: Both LDEE and DEE groups showed significant improvements in RD, KT, GT, PD, and CAL over time (p < 0.001). At T1 and T2, KT was significantly higher in the LDEE group (T1: 3.73 ± 0.72 mm; T2: 3.98 ± 0.76 mm) compared to the DEE group (T1: 3.21 ± 0.61 mm; T2: 3.44 ± 0.74 mm; p < 0.05). Other parameters (RD, GT, PD, CAL) showed no statistically significant intergroup differences at any time point (p > 0.05). After 6 months, MRC was 95% and CRC 82.6% for LDEE, compared to 94.8% and 82.6% for DEE (p > 0.05). PES scores were similar between groups at all time points (p > 0.05). Conclusions: Both laser- and scalpel-deepithelialized grafts effectively treated gingival recessions. LDEE combined with TUN resulted in significantly greater KT width compared to DEE + TUN. Full article

Introduction: Digital planning and evolution of technology is allowing dentistry to be more efficient in time than before. In orthodontics the main purpose is to obtain fewer patient visits and to reduce the bonding time. For that, indirect bonding planned with CAD-CAM softwares is used to obtain a shorter treatment period, in general, and less chair-time. This waste of chair-time should also be reduced in other fields of dentistry such as endodontics, surgery, prosthodontics, and aesthetics. Methods: A total of 504 teeth were embedded into epoxy resin models mounted as a dental arch. Customized lingual multibracket appliances were bonded by a current adhesion protocol. After that, they were debonded, the polishing of cement remnants was performed with three different burs and two drills. The polishing time of each group was recorded by an iPhone 14 chronometer. Results: Descriptive and comparative statistical analyses were performed with the different study groups. Statistical differences (p < 0.005) between diamond bur and tungsten carbide and white stone burs and turbine were obtained, with the first being the slowest of them. Discussion: Enamel roughness was widely studied in orthodontics polishing protocol as the main variable for protocols establishment. However, in lingual orthodontics, due the difficulty of the access to the enamel surfaces, the protocol is not clear and efficiency should be considered. It was observed that the tungsten carbide bur is the safest bur. It was also recommended that a two-step protocol of polishing by tungsten carbide bur be followed by polishers. Conclusions: A tungsten carbide bur mounted in a turbine was the most efficient protocol for polishing after lingual bracket debonding. Full article

Background: The development of antimicrobial resistance is a major public health issue, in which dentists play a significant role by prescribing 7–11% of worldwide antibiotics. The aim of this study is to evaluate the self-perception and knowledge of antibiotic therapy in fifth-year undergraduate dental students. Methods: This is a cross-sectional observational study based on the STROBE (Strengthening the Reporting of Observational Studies in Epidemiology) guidelines. An electronic survey consisting of 18 questions was conducted with fifth-year students enrolled in the 2022/23 and 2023/24 academic years. The data were analyzed using descriptive and inferential statistical methods. Results: A total of 139 students (76.4%) completed the questionnaire. A total of 71.9% of students considered that they had received adequate education in antibiotic therapy, particularly in Oral Surgery (89.2%) and Periodontics (86.3%). The theoretical classes (3.50 ± 0.98) and practical sessions (3.18 ± 1.29) provided the knowledge that had the greatest influence on their education. They showed high self-confidence in diagnosing an infection (3.49 ± 0.73) and in choosing the appropriate antibiotic and dosage (3.26 ± 0.73). Over 76% of students answered correctly regarding the need for antibiotic prescriptions in various practical scenarios, except in the replantation of avulsed permanent teeth (54%). Conclusions: Dental students’ knowledge of antibiotics should be reinforced, as a high percentage answered correctly regarding the indications for antibiotics in pulpal and periapical diseases, but students performed less well regarding the choice of antibiotic and dosage in patients without sensitivity to β-lactams. Full article

Background: Inadequate presurgical planning is a key contributor to suboptimal outcomes in orthognathic surgery. This study aims to assess the accuracy of a digital surgical planning workflow conducted prior to any orthodontic intervention. Methods: Digital planning was performed for 26 patients before orthodontic treatment (T0) and compared to the actual preoperative planning (T1). Digitized plaster casts were merged with CBCT data and converted to orthodontic setups to create a 3D virtual head model. After voxel-based registration of T0 and T1, dental arches were virtually osteotomized and repositioned according to planned outcomes. These T0 segments were then aligned with T1 planning using bony landmarks of the maxilla. Anatomical landmarks were used to construct virtual triangles on maxillary and mandibular segments, enabling assessment of positional and orientational differences. Transformations between T0 and T1 were translated into clinically meaningful metrics. Results: Significant differences were found between T0 and T1 at the dental level. T1 exhibited a greater clockwise rotation of the dental maxilla (mean: 2.85°) and a leftward translation of the mandibular dental arch (mean: 1.19 mm). In SARME cases, the bony mandible showed larger anti-clockwise roll differences. Pitch variations were also more pronounced in maxillary extraction cases, with both the dental maxilla and bony mandible demonstrating increased clockwise rotations. Conclusions: The proposed orthognathic surgical planning workflow shows potential for simulating mandibular outcomes but lacks dental-level accuracy, especially in maxillary anterior torque. While mandibular bony outcome predictions align reasonably with pretreatment planning, notable discrepancies exceed clinically acceptable thresholds. Current accuracy limits routine use; further refinement and validation in larger, homogeneous patient groups are needed to enhance clinical reliability and applicability. Full article

Successful dental implant therapy relies on accurate planning and placement, e.g., through static, computer-aided implant surgery using CAD/CAM-fabricated surgical guides. This study examined production methods’ influence on surgical guide sleeve housing geometry. A model with two edentulous spaces was digitized using intraoral scanning and CBCT, and two virtually positioned implants were planned. Ten guides per group were produced using milling (MCX5), DLP printing (ASIGA and SHERA), and SLA printing (FORM), printing with 50 µm and 100 µm layers each. Each guide (n = 70) was then digitized using an industrial scanner before and after sterilization. Superimposition of the actual guide data with the reference data allowed for evaluation of deviations at the drill sleeve housing along the x-, y-, z-, and dxyz-axes. Descriptive and statistical evaluation was performed (significance level: p ≤ 0.0125). Significant differences existed among the production methods: Milling and SLA showed higher deviations than the DLP group (p < 0.001). Milled guides post-sterilization showed the highest deviations (0.352 ± 0.08 mm), while one DLP printer at 50 μm layer thickness showed lowest deviations (0.091 ± 0.04 mm). The layer thickness was insignificant, whereas sterilization increased deviation (p < 0.001). DLP produced the most precise implant surgical guides. All 3D printers were suitable for fabricating clinically acceptable surgical guides. Full article

Background: Foreign bodies (FBs) within the masticatory space are a rare but significant complication of oral and maxillofacial procedures. Despite advancements in orthognathic surgery, instrument breakage and accidental loss can lead to challenging secondary procedures. Clinical experience with retained foreign bodies in the masticatory space following orthognathic surgery and related dental procedures is summarized. Methods: A retrospective search was conducted in the surgical and radiological database of a tertiary referral center for maxillofacial surgery, covering procedures from January 2017 to December 2024. Patients were included if they had undergone orthognathic surgery and presented with a retained FB in the masticatory space confirmed through imaging. Clinical records, operative notes, imaging studies, and follow-up data were reviewed. Results: Out of 2092 procedures, four patients (0.19%) were identified. Two FBs were related to broken surgical instruments during orthognathic surgery (a suture needle and a burr fragment), while two were fractured local anesthesia needles during third molar extraction under local anesthesia. All FBs were located in deep compartments of the masticatory space (paramandibular or pterygopalatine region). Surgical retrieval via transoral approach under general anesthesia was successful in all cases. One patient experienced transient facial nerve dyskinesia; no long-term complications or recurrences were noted. Conclusions: Retained foreign bodies in the masticatory space are infrequent yet warrant prompt recognition and surgical management to mitigate the risk of infection, nerve damage, and repeated procedures. Thorough instrument checks, proper technique, and advanced imaging modalities are crucial for minimizing these complications in orthognathic surgery. Full article

Background/Objectives: Colorectal cancer (CRC) is one of the major epidemiological oncological confronts with established risk factors, including male sex. Still, CRC is reported among the leading malignancies in the female population. The necessity for possible, easily accessible prognostic factors is required to improve patient outcomes. This study aimed to assess sex-related differences in nine-month four-stage CRC results of palliative systemic therapy. Methods: A total of 67 patients (39 males) with a median age of 70 (64–76) years were referred for first-line palliative chemotherapy due to end-stage colorectal cancer diagnosis. The CRC advancement was evaluated by computed tomography (CT) before and 9 months after chemotherapy. The demographical and clinical characteristics were evaluated for nine-month therapy outcomes, including mortality risk and CT scan results. Results: The nine-month mortality risk in female and male groups was indifferent, reaching 21% (6 patients) and 21% (8 patients), respectively (p = 0.935). Among survivors, therapy response was observed in 6 (21%) female and 20 (51%) male patients (p = 0.056). In multivariable analysis, the male sex (OR: 3.91, 95% CI: 1.09–14.05, p = 0.037) and RDW (OR: 0.61, 95% CI: 0.42–0.88, p = 0.008) were found to be significant for disease response to systemic therapy based on CT scan results. The ROC curve for predictive role yields a sensitivity of 71.1%, specificity of 57.8%, and an area under the curve (AUC) of 0.726. Conclusions: Our analysis points out the possible favorable role of the male sex on nine-month systemic therapy response in palliative CRC. The RDW-CV can be regarded as a possible indicator of chemotherapy response in colorectal cancer. The mortality risk within 9 months of systemic therapy is comparable between males and females. Full article

Peri-implantitis is an inflammatory disease-causing bone loss around dental implants, often requiring reconstructive surgical therapies to reduce probing depth and regenerate bone. However, such surgeries are frequently complicated by postoperative issues. This retrospective case series aimed to identify the main postoperative complications following the reconstructive treatment of peri-implant bone defects in peri-implantitis patients. Data from 14 patients with 21 affected implants were analyzed, including demographics, oral hygiene, surgical techniques, and complications such as wound dehiscence, membrane exposure, and infections. Wound dehiscence was measured using Image J^® software version 1.54. Descriptive and bivariate analyses were performed. The results showed that 11 implants (52.4%; 95% confidence interval (95%CI): 29% to 76%) in nine patients (57.1%; 95%CI = 27% to 87%) developed soft tissue dehiscence after one week, with membrane exposure observed in 4 implants. Dehiscence was significantly associated with mandibular implant location (p = 0.003), poor interproximal hygiene (p = 0.008), and membrane exposure (p = 0.034). No postoperative infections were recorded. In conclusion, more than half of peri-implantitis patients undergoing reconstructive surgery experience wound dehiscence, particularly in cases involving mandible, poor hygiene, and membrane exposure. This complication might compromise bone regeneration and reduce the treatment success rate. These results should be interpreted cautiously due to study design limitations (retrospective design, lack of a control group, and small sample size). Full article

Background: Dynamic computer-aided navigation systems are a real-time motion tracking technology widely applied in oral implantology and endodontics to enhance precision and reduce complications. However, their reliability, accuracy, and usability in dentoalveolar surgery and maxillary bone augmentation remain underinvestigated. Methods: A systematic review following PRISMA guidelines was conducted and registered on PROSPERO (CRD42024610153). PubMed, Scopus, Web of Science, and Cochrane Library databases were searched until October 2024 to retrieve English eligible studies, without restrictions on the publication year, on dynamic computer-assisted navigation systems in dentoalveolar and bone augmentation surgeries. Exclusion criteria were surgery performed without dynamic computer-assisted navigation systems; dental implant placement; endodontic surgery; and maxillo-facial surgery. The outcomes were reliability, accuracy, post-operative course, surgical duration, complications, patient- and clinician-reported usability, acceptability, and satisfaction. Included studies were qualitatively synthetized and judged using dedicated tools for the different study designs. Results: Twenty-nine studies with 214 patients were included, showing high reliability in dentoalveolar and bone augmentation surgeries comparable to or superior to freehand surgeries, higher accuracy in dentoalveolar surgery compared to maxillary bone augmentation, and reduced complication rates across all surgeries. While overall surgical duration slightly increased due to technology installation, operative time was reduced in third molar extractions. Patient-reported outcomes were poorly investigated. Clinician-reported outcomes were mixed, but difficulties in the differentiation of soft tissue from hard tissue were recorded, especially in sinus floor elevation. Conclusions: Dynamic computer-assisted navigation systems enhance accuracy and safety in dentoalveolar and bone augmentation surgery. Further studies are needed to assess the underinvestigated patient-reported outcomes and standardize protocols. Full article