Search Results (117)

Atmospheric deposition is considered a source of heavy metals in plants. However, research on the uptake pathways of atmospheric particulate matter by leaves and the subsequent translocation of heavy metals within plants remains limited. In this study, the foliar uptake and translocation of heavy metals in two maize cultivars (fresh corn and silage corn cultivars, called Baiyunuo909 and Qingzhu932, respectively) were investigated through foliar exposure using soil from a mining area to simulate dry deposition under controlled chamber conditions. The height and biomass of maize were inhibited after three and five exposures to fallout deposition, and this inhibitory effect became increasingly pronounced with prolonged exposure. Furthermore, the activities of catalase (CAT) and superoxide dismutase (SOD), along with the malondialdehyde (MDA) content, significantly decreased in both cultivars relative to the control. This decrease was more significant in fresh maize, with the reduction ranges being 94.3%, 42.1%, and 40.8%, respectively. Fallout exposure elevated the contents of cadmium, lead, arsenic and zinc in the leaves, stems, and sheaths of both cultivars, despite no significant increase in the roots. The bioconcentration factors of leaves for heavy metals ranged from 0.0002 to 0.0007, representing a 3.5–fold variation; however, the overall low values showed no significant differences. Scanning electron microscopy with energy-dispersive spectroscopy revealed the accumulation of particulate matter on the leaf surface, with a higher density around the cuticle and stomata. Additionally, the fresh corn cultivar demonstrated greater sensitivity to fallout than the silage corn cultivar. In summary, heavy metals present in atmospheric particulate matter can be absorbed by leaves and subsequently translocated to other plant tissues. This study provides a theoretical foundation for understanding the mechanisms of foliar heavy metal uptake in maize. Full article

Corn (Zea mays L.) yield productivity is driven by a multitude of factors, specifically genetics, environment, and management practices, along with their corresponding interactions. Despite continuous monitoring through proximal or remote sensors and advanced predictive models, understanding these complex interactions remains challenging. While predictive models are improving with regard to accurate predictions, they often fail to explain causal relationships, rendering them less interpretable than desired. Process-based or biophysical models such as the Agricultural Production Systems sIMulator (APSIM) incorporate these causalities, but the multitude of interactions are difficult to tease apart and are largely sensitive to external drivers, which often include stochastic variations. To address this limitation, we developed a novel methodology that reveals these hidden causal structures. We simulated corn production under varied conditions, including different planting dates, nitrogen fertilizer amounts, irrigation rules, soil and environmental conditions, and climate change scenarios. We then used the simulation results to rank features having the largest impact on corn yield through Random Forest modeling. The Random Forest model identified nitrogen uptake and annual transpiration as the most influential variables on corn yield, similar to the existing research. However, this analysis alone provided limited insight into how or why these features ranked highest and how the features interact with each other. Building on these results, we deployed a Causal Bayesian model, using a hybrid approach of score-based (hill climb) and constraint-based (injecting domain knowledge) models. The causal analysis provides a deeper understanding by revealing that genetics, environment, and management factors had causal impacts on nitrogen uptake and annual transpiration, which ultimately affected yield. Our methodology allows researchers and practitioners to unpack the “black box” of crop production systems, enabling more targeted and effective model development and management recommendations for optimizing corn production. Full article

Corn (Zea mays L.) ranks among the most important cereal crops globally, extensively cultivated for food, animal feed, and industrial applications. Its large-scale production generates substantial amounts of agricultural residues such as cobs, husks, stalks, leaves and other, which are often underutilized, leading to environmental concerns. Due to their high carbon content, lignocellulosic structure, and abundant availability, these residues represent a sustainable and low-cost raw material for the synthesis of activated carbon. Corn waste-derived activated carbon has emerged as a promising material for the efficient removal of heavy metals from aqueous solutions. Its high surface area, well-developed porosity, and adjustable surface chemistry, referring to the functional groups on the adsorbent surface that can be modified to enhance affinity toward metal ions, facilitate effective adsorption. This review provides a comprehensive overview of (1) the potential of corn waste biomass as a precursor for activated carbon production, (2) methods of carbonization and activation that influence the textural and chemical properties of the resulting adsorbents, (3) adsorption performance for heavy metal removal under varying experimental parameters such as pH, initial concentration, contact time, and adsorbent dosage, (4) adsorption mechanisms responsible for heavy metal uptake. Reported maximum adsorption capacities vary for different metals, ranging from 2.814–206 mg/g for lead, 0.21–87.72 mg/g for cadmium, 9.6246–175.44 mg/g for chromium, and 0.724–643.92 mg/g for copper. Utilizing corn waste not only provides an eco-friendly approach for managing agricultural residues but also supports the development of efficient adsorbents. Nevertheless, challenges such as scaling up production and evaluating adsorbent performance in real wastewater samples remain and require further investigation. Finally, the review highlights key challenges and knowledge gaps in current research and offers recommendations for future studies aimed at advancing the practical application of corn waste–based activated carbons in water treatment. Full article

Heavy metals in farmland soils pose severe threats to agricultural productivity and food safety. To investigate contamination in the soil–wheat/corn system, 24 sets of adjacent farmland soil, wheat, and corn plant samples were collected near metal smelting facilities in Jinchang City, a typical urban oasis in northwestern China. Concentrations of Ni (nickel), Cu (copper), and Co (cobalt) were measured. Results indicated mean soil concentrations of 143.66 mg kg⁻¹ (Ni), 130.00 mg kg⁻¹ (Cu), and 24.04 mg kg⁻¹ (Co), all exceeding background values for Gansu Province, confirming that the sampling sites exhibit varying degrees of contamination with Ni, Cu, and Co. Correlation analyses revealed strong intermetal relationships (Ni, Cu, Co; p < 0.01), while spatial distribution patterns showed that Ni in wheat and corn grains closely mirrored soil Ni distribution. The bio-concentration factor (BCF) for wheat roots surpassed that of corn roots, highlighting wheat’s greater susceptibility to heavy metal uptake. Heavy metal levels in crop organs exceeded limits set by the Safety Guidelines for Feed Additives. Geo-accumulation indices and potential ecological risk assessments demonstrated substantial metal accumulation and varying ecological risks, with contamination levels ranked as Cu > Ni > Co. Non-carcinogenic hazard indices indicated elevated health risks for children consuming locally grown wheat and corn. This study provides a scientific foundation for crop rotation strategies and soil remediation in the region. Full article

Selenium, an essential metalloid, plays a dual role in biological systems: while crucial for maintaining normal biological processes, excessive levels can be toxic. Organisms mitigate selenium toxicity through a biochemical process known as methylation, in which inorganic selenium species are enzymatically converted into less toxic, excretable organic metabolites. This review synthesizes recent biochemical and environmental findings (with an emphasis on the past decade) related to selenium methylation. It outlines the enzymatic mechanisms—particularly involving glutathione reductase, SAM-dependent methyltransferases, and selenocysteine lyase—through which selenite and selenate are reduced and methylated to intermediates such as hydrogen selenide (H₂Se), ultimately yielding MMSe, DMSe, and TMSe⁺. The role of enzymes such as selenocysteine lyase in processing organic selenium and factors affecting the efficiency of these processes, including environmental conditions, are discussed. The role of enzymes such as selenocysteine lyase in metabolizing organic selenium species is also discussed, along with how environmental conditions (e.g., soil composition, redox potential) and genetic variability influence methylation efficiency and selenium speciation. In conclusion, this paper explores selenium methylation in plants, focusing on rice and corn, and how their selenium uptake and metabolism are affected by environmental factors. It examines the conversion of selenium into organic forms like selenomethionine and selenocysteine, and the role of methylation in managing excess selenium. The findings offer insights into selenium chemistry, with implications for food safety, nutrition, and environmental management, addressing key knowledge gaps and enhancing our understanding of selenium’s biological and chemical roles. Full article

Cadmium (Cd) contamination of soil threatens agricultural productivity and food safety. In this study, a dual-component remediation strategy combining lanthanum-cysteine chelate (CLa) and corn steep liquor (CSL) was developed to alleviate Cd toxicity in Chinese cabbage (Brassica rapa subsp. pekinensis). CLa enhanced photosynthetic efficiency, antioxidant enzyme activity, and root viability, while reducing Cd translocation to shoots. In contrast, CSL acted primarily through organic nutrient supplementation, stimulating chlorophyll synthesis and promoting the growth of beneficial rhizosphere microbes. Notably, the combined treatment (CLCS) exhibited a synergistic effect, significantly enhancing biomass production, nutrient uptake, photosynthetic performance, and oxidative stress tolerance, while reducing Cd accumulation in plant tissues. Furthermore, CLCS optimized the soil microenvironment and microbiota composition, reinforcing plant resilience under Cd stress. This study offers a promising and cost-effective approach for mitigation of heavy metal stress and crop productivity improvement by coordinated plant–microbe–soil interactions. Full article

Soybeans (Glycine max L.), a globally significant crop, play a critical role in economic, nutritional, and ecological systems, particularly in rotational farming due to their nitrogen-fixing capacity. This study investigated the residual effects of vermicompost (VC) and vermicompost tea (VCT) applied during a preceding corn cycle on subsequent soybean growth and productivity in an organic corn–soybean rotation. Soybeans were grown in raised beds previously treated with different VCT concentrations and combinations of VC+VCT, without additional fertilization during the soybean phase. Physiological traits, including leaf chlorophyll content (SPAD values) and stomatal conductance, were measured alongside biomass, yield, and plant leaves nutrient concentrations. VC+VCT treatments significantly increased biomass and yield, with VC1+VCT20 achieving the highest biomass (3.02 tons/ha) and yield (1.68 tons/ha). Leaf nutrient analysis revealed increased uptake of both macro- and micronutrients in amended treatments, while SPAD and stomatal conductance values remained consistently higher than in the control. Soil analyses confirmed improved nutrient retention and cation exchange capacity in amended plots, demonstrating the legacy benefits of organic inputs. Therefore, residual VCT and VC+VCT applications improved soybean productivity, nutrient acquisition, and physiological performance in rotational systems. By reducing reliance on synthetic fertilizers and enhancing soil fertility, this strategy supports climate-smart agriculture principles and contributes to SDG 2 (Zero Hunger), SDG 12 (Responsible Consumption and Production), and SDG 13 (Climate Action). Full article

This study investigates the potential of corn stover, an abundant agricultural byproduct, as a sustainable additive in concrete masonry units (CMUs). Preliminary trials were conducted to determine the optimal fiber length (~3 mm and ~10 mm), fiber content (0%, 1%, 3%, and 5% by volume), and alkalinization method (soaking in 0.5 M NaOH, KOH, or synthetic concrete pore solution) for corn stover fibers (CSFs). The results indicated that short fibers treated with synthetic concrete pore solution yielded the best compressive strength and workability, and were thus selected for the main study. A novel mixture was developed by replacing 10% of cement with corn stover ash (CSA) and incorporating 1% alkaline-treated CSF by volume. The resulting blocks (termed “Corncrete”) were evaluated for mechanical and durability properties, including strength, water absorption, bulk and surface electrical resistivity, rapid chloride permeability (RCPT), and fire resistance. Compared to conventional CMUs, Corncrete exhibited an 11–13% reduction in 28- and 91-day compressive strength, though the difference was statistically insignificant. Physically, Corncrete had a 4.4% lower bulk density and a 7.9% higher total water absorption compared to the control. However, its water absorption rates at early stages were 32% and 48% lower, indicating better resistance to moisture uptake shortly after exposure. Durability tests revealed a 13.7% reduction in chloride ion permeability and a 33% increase in bulk and surface electrical resistivity after 90 days. Fire performance was comparable between the two mixtures, with both displaying ~10.5% mass loss and ~5% residual strength after high-temperature exposure. These findings demonstrate that Corncrete offers balanced mechanical performance and enhanced durability, making it a viable eco-friendly option for non-structural masonry applications. Full article

Underutilized leafy greens are considered as functional plant species primarily due to their resilience to abiotic stress factors, low nutrient requirements, and high nutritional value. Over the past 30 years, many experiments have been conducted to identify nutrient-efficient species, cultivars, landraces, and ecotypes, but few have successfully entered mainstream agriculture. The integration of these species into advanced horticultural systems, such as hydroponics, has the potential to further strengthen their impact on sustainable agriculture by minimizing use of resources, enabling year-round cultivation, and improving the nutritional profile of the harvested produce. As leafy vegetables, a primary food safety concern is the accumulation of nitrates in the leaves. In hydroponics, this issue is usually addressed by balancing the NH₄-N/total-N ratio (N_r) in the nutrient solution. Provided that the plant responses to high ammonia supply are species-dependent, three wild leafy greens, iceplant, corn salad, and common purslane, were grown in a soilless culture, with perlite as the substrate, under low (0.04) and high (0.12) N_r on a molar basis. Additionally, the potential of protein hydrolysates (PH) and seaweed extracts (SW) to alleviate plant tolerance to excess ammonia supply was also investigated. In terms of yield, high N_r led to significant yield restrictions in iceplant that reached 28%, while on corn salad, it had a positive impact, with yield increasing by 18%. Both biostimulant applications enhanced iceplant productivity only under optimal N_r conditions (0.04). Apart from yield responses, biofertilizers had no substantial impact on the plant nutrient profile. In contrast, high N_r suppressed nitrate accumulation in fresh leaves, while enhancing micronutrient uptake in all three plant species. In conclusion, this study highlights the pivotal role of biostimulants as plant stress protectors and growth regulators and identifies the optimal N_r ratio for maximizing the yield and quality performance of corn salad, iceplant, and common purslane in soilless cultivation systems. Full article

This study aimed to develop an effective method to overcome the challenge of straw return in cold-region soil. We systematically investigated the synergistic mechanism of montmorillonite (MMT) and composite amino acid (CAA) on straw humification and carbon sequestration through a low-temperature litterbag field experiment. The results indicate that the combined treatment (MMT-CAA) significantly increased the decomposition rate of straw by 42.1% compared to the control (CK), with MMT showing particular efficacy in lignin degradation (28.3% reduction), while the CAA preferentially decomposed cellulose (19.7% reduction). An FTIR analysis of the decomposition products confirmed these findings. Water-soluble organic carbon (WEOC) and its three-dimensional fluorescence spectra exhibited a 25.0% increase in MMT-CAA and enhanced aromaticity of humic acid-like substances. Humic substances and their ¹³C-NMR revealed that MMT-CAA enhanced humic acid formation and molecular stability by 31.4% (with a 47.8% increase in aromaticity). A further redundancy analysis and symbiotic network of microorganisms demonstrated that MMT-CAA increased the abundance of lignocellulose-degrading phyla (Actinomycetes and Stramenomycetes) and the formation of a complex co-degradation network. Field corn planting trials indicated that MMT-CAA increased plant height by 55.1%, stem thickness by 58.7%, leaf area by 70.2%, and the SPAD value by 41.1%. Additionally, MMT significantly reduced CO₂ and N₂O emission fluxes by 35.6% and 15.8%, respectively, while MMT-CAA increased CH₄ uptake fluxes by 13.4%. This study presents an innovative strategy, providing mechanistic insights and practical solutions to synergistically address the challenges of slow straw decomposition and carbon loss in cold regions. Full article

Exposure to per- and polyfluoroalkyl substances (PFASs) can cause detrimental health effects. The consumption of contaminated food is viewed as a major exposure pathway for humans, but the relationship between agriculture and PFASs has not been investigated thoroughly, and it is becoming a pressing issue since health advisories are continuously being reassessed. This semi-systematic literature review connects the release, environmental fate, and agriculture uptake of PFASs to enhance comprehension and identify knowledge gaps which limit accurate risk assessment. It focuses on the heavily agricultural state of Minnesota, USA, which is representative of the large Midwestern US Corn Belt in terms of agricultural activities, because PFASs have been monitored in Minnesota since the beginning of the 21st century. PFAS contamination is a complex issue due to the over 14,000 individual PFAS compounds which have unique chemical properties that interact differently with air, water, soil, and biological systems. Moreover, the lack of field studies and monitoring of agricultural sites makes accurate risk assessments challenging. Researchers, policymakers, and farmers must work closely together to reduce the risk of PFAS exposure as the understanding of their potential health effects increases and legacy PFASs are displaced with shorter fluorinated replacements. Full article

The low nitrogen-use efficiency (NUE) in sandy soils, due to high porosity and poor nutrient retention, necessitates proper management in fertilization. This study aims to evaluate the effect of biochar-coated urea (BCU) with different coating thicknesses and nitrogen doses on soil nitrogen content, nitrogen uptake, NUE, growth, and yield of sweet corn in sandy soil. The experiment used a factorial randomized block design with two factors, including biochar coating thicknesses (i.e., 14% and 29%) and fertilization doses (i.e., 50%, 100%, 150%, 200%, and 250%). The results showed that the 29% biochar coating thickness led to 9.9–21.3% higher plant height, N uptake, and N-use efficiency, but it led to 22.8% lower yield, as compared to the 14% biochar coating thickness. Additionally, the application of BCU doses of 100% and 150% (~161 and 241.5 kg N/ha) led to 9.2–97.3% higher maize growth, yield, N uptake, and NEU as compared to the other doses (i.e., 50%, 100%, 250%). This study confirmed that the combination of a 29% biochar coating thickness with 150% of the recommended BCU dose (~241.5 kg N/ha) was the best combination, resulting in the highest N uptake, growth, and yield of maize. Full article

With increasing global challenges related to water scarcity and phosphorus depletion, the recovery and reuse of wastewater-derived nutrients offer a sustainable path forward. This study evaluates the dual role of lanthanides (Ce³⁺ and La³⁺) in recovering phosphorus from municipal wastewater and supporting corn (Zea mays) cultivation through lanthanide phosphate (Ln-P) and lanthanide-reclaimed wastewater (LRWW, wastewater spiked with lanthanide). High-purity precipitates of CePO₄ (98%) and LaPO₄ (92%) were successfully obtained without pH adjustment, as confirmed by X-ray photoelectron spectroscopy (XPS) and energy-dispersive spectroscopy (EDS). Germination assays revealed that lanthanides, even at concentrations up to 2000 mg/L, did not significantly alter germination rates compared to traditional coagulants, though root and shoot development declined above this threshold—likely due to reduced hydrogen peroxide (H₂O₂) production and elevated total dissolved solids (TDSs), which induced physiological drought. Greenhouse experiments using desert-like soil amended with Ln-P and irrigated with LRWW showed no statistically significant differences in corn growth parameters—including plant height, stem diameter, leaf number, leaf area, and biomass—when compared to control treatments. Photosynthetic performance, including stomatal conductance, quantum efficiency, and chlorophyll content, remained unaffected by lanthanide application. Metal uptake analysis indicated that lanthanides did not inhibit phosphorus absorption and even enhanced the uptake of calcium and magnesium. Minimal lanthanide accumulation was detected in plant tissues, with most retained in the root zone, highlighting their limited mobility. These findings suggest that lanthanides can be safely and effectively used for phosphorus recovery and agricultural reuse, contributing to sustainable nutrient cycling and aligning with the United Nations’ Sustainable Development Goals of zero hunger and sustainable cities. Full article

Soil degradation and declining fertility threaten sustainable agriculture and crop productivity. This study evaluates the effects of CFMI-8, a co-fermented microbial inoculant comprising eight bacterial strains selected through genomic and metabolic modeling, on soil health, nutrient availability, and corn performance. Conducted in a randomized complete block design at Findlay Farm, Wisconsin, the field trial assessed soil biological activity, nutrient cycling, and crop yield responses to CFMI-8 treatment. Treated soils exhibited significant increases in microbial organic carbon (+224.1%) and CO₂ respiration (+167.1%), indicating enhanced microbial activity and organic matter decomposition. Improvements in nitrate nitrogen (+20.2%), cation exchange capacity (+23.1%), and potassium (+27.3%) were also observed. Corn yield increased by 28.6%, with corresponding gains in silage yield (+9.6%) and nutritional quality. Leaf micronutrient concentrations, particularly iron, manganese, boron, and zinc, were significantly higher in treated plants. Correlation and Random Forest analyses identified microbial activity and nitrogen availability as key predictors of yield and nutrient uptake. These results demonstrate CFMI-8’s potential to enhance soil fertility, promote nutrient cycling, and improve crop productivity under field conditions. The findings support microbial inoculants as viable tools for regenerative agriculture and emphasize the need for long-term studies to assess sustainability impacts. Full article

Integrating organic soil amendments such as vermicompost (VC) and vermicompost tea (VCT) in agriculture has received increasing attention as a sustainable strategy to improve soil fertility, enhance plant growth, and suppress pest infestations. This study aimed to evaluate the effects of varying concentrations of VCT (10%, 20%, and 40%), alone and in combination with VC (2.47 ton/ha), on the development and yield of corn (Zea mays), and suppression of fall armyworm (FAW, Spodoptera frugiperda) infestation. The experiment was conducted in seven raised beds with seven treatments: V0 (control), VCT10, VCT20, VCT40, VC1 + VCT10, VC1 + VCT20, and VC1 + VCT40. Six weekly applications of VCT were applied starting at the V2 stage, and soil and plant nutrient contents were determined post-harvest. Additionally, relative chlorophyll content, height, cob yield, dry biomass, and FAW infestations were assessed. Results show that both VC and VCT significantly enhanced soil nutrient content compared to the control treatment (V0). VCT20 and VC1 + VCT10 improved plant N, K, and micronutrient uptake. Corn treated with VCT10 and VC1 + VCT10 had the highest biomass (6.52 and 6.57 tons/ha, respectively), while VCT20 produced the highest cob yield (6.0 tons/ha), which was more than eight times that of V0. SPAD values and corn height were significantly high across all treatments, with VCT20 achieving the highest SPAD readings while the control achieved the lowest. For FAW infestation, the control treatment experienced moderate infestation. At the same time, there was complete suppression in VCT20 and VCT40 treatments and a reduction in VC + VCT treatments, likely due to the bioactive compounds and beneficial microbes in VC and VCT that strengthened plant immunity. The results suggest that VCT20 is a cost-effective, eco-friendly amendment for improving corn performance and FAW resistance. This study contributes to sustainable agriculture by demonstrating how organic amendments can enhance crop resilience while supporting environmentally friendly farming practices. Full article