Search Results (755)

Fungal lytic polysaccharide monooxygenases (LPMOs) have revolutionized the field of biomass degradation by introducing an oxidative mechanism that complements traditional hydrolytic enzymes. These copper-dependent enzymes catalyze the cleavage of glycosidic bonds in recalcitrant polysaccharides such as cellulose, hemicellulose, and chitin, through the activation of molecular oxygen (O₂) or hydrogen peroxide (H₂O₂). Their catalytic versatility is intricately modulated by structural features, including the histidine brace active site, surface-binding loops, and, in some cases, appended carbohydrate-binding modules (CBMs). The oxidation pattern, whether at the C1, C4, or both positions, is dictated by subtle variations in loop architecture, amino acid microenvironments, and substrate interactions. LPMOs are embedded in a highly synergistic fungal enzymatic system, working alongside cellulases, hemicellulases, lignin-modifying enzymes, and oxidoreductases to enable efficient lignocellulose decomposition. Industrial applications of fungal LPMOs are rapidly expanding, with key roles in second-generation biofuels, biorefineries, textile processing, food and feed industries, and the development of sustainable biomaterials. Recent advances in genome mining, protein engineering, and heterologous expression are accelerating the discovery of novel LPMOs with improved functionalities. Understanding the balance between O₂- and H₂O₂-driven mechanisms remains critical for optimizing their catalytic efficiency while mitigating oxidative inactivation. As the demand for sustainable biotechnological solutions grows, this narrative review highlights how fungal LPMOs function as indispensable biocatalysts for the future of the Circular Bioeconomy and green industrial processes. Full article

A novel cellulose-degrading bacterial strain, D3-1, capable of degrading cellulose under medium- to high-temperature conditions, was isolated from soil samples and identified as Staphylococcus caprae through 16SrRNA gene sequencing. The strain’s cellulase production was optimized by controlling different factors, such as pH, temperature, incubation period, substrate concentration, nitrogen and carbon sources, and response surface methods. The results indicated that the optimal conditions for maximum cellulase activity were an incubation time of 91.7 h, a temperature of 41.8 °C, and a pH of 4.9, which resulted in a maximum cellulase activity of 16.67 U/mL, representing a 165% increase compared to pre-optimization levels. The above experiment showed that, when maize straw flour was utilized as a natural carbon source, strain D3-1 exhibited relatively high cellulase production. Furthermore, gas chromatography–mass spectrometry (GC-MS) analysis of products in the degradation liquid revealed the presence of primary sugars. The results indicated that, in the denitrification of simulated sewage, supplying maize straw flour degradation liquid (MSFDL) as the carbon source resulted in a carbon/nitrogen (C/N) ratio of 6:1 after a 24 h reaction with the denitrifying strain WH-01. The total nitrogen (TN) reduction was approximately 70 mg/L, which is equivalent to the removal efficiency observed in the glucose-fed denitrification process. Meanwhile, during a 4 h denitrification reaction in urban sewage without any denitrifying bacteria, but with MSFDL supplied as the carbon source, the TN removal efficiency reached 11 mg/L, which is approximately 70% of the efficiency of the glucose-fed denitrification process. Furthermore, experimental results revealed that strain D3-1 exhibits some capacity for nitrogen removal; when the cellulose-degrading strain D3-1 is combined with the denitrifying strain WH-01, the resulting TN removal rate surpasses that of a single denitrifying bacterium. In conclusion, as a carbon source in municipal sewage treatment, the degraded maize straw flour produced by strain D3-1 holds potential as a substitute for the glucose carbon source, and strain D3-1 has a synergistic effect with the denitrifying strain WH-01 on TN elimination. Thus, this research offers new insights and directions for advancement in environmental sewage treatment. Full article

The aim of this study is to evaluate the effectiveness of deacidifying treatments for the restoration of textiles used as supports for works of art, with particular attention to the chemical stability, colour variation and mechanical resistance of the materials over time. The present study involved the analysis of two products: Bookkeeper^TM, containing magnesium oxide, and Nanorestore^TM, a dispersion of calcium hydroxide in alcoholic solutions of ethanol and 2-propanol. The products were applied to a series of tests on cotton, linen and jute fabrics. The experimental approach comprised an artificial degradation process of the fabrics, followed by the application of the treatments and an accelerated ageing cycle. A series of parameters were monitored throughout the experiment, encompassing surface pH, chromatic shifts ascertained through colorimetric measurements and the morphological transformations of the fabrics, as elucidated by scanning electron microscopy (SEM-EDS). The findings yielded from this study have enabled the delineation of the behaviour exhibited by the treated materials over an extended timeframe. This underscores the significance of a judicious selection of treatments, contingent upon the particular chemical and physical attributes inherent to the fabrics in question. Full article

The cellulose-binding domain and inter-domain linker play crucial roles in the degradation of crystalline cellulose by cellulases. Although significant differences exist in the degradation efficiency of cellobiohydrolase I (CBH I) derived from different fungal sources, the relationship between this efficiency diversity and variations in the non-catalytic region remains poorly understood. In this study, we found significant differences in the length and amino acid composition of the linker region of CBH I derived from Sordariomycetes and Eurotiomycetes. By replacing the non-catalytic region of Penicillium oxalicum CBH I with the corresponding segment from Trichoderma reesei, the cellulose conversion efficiency of the extracellular enzyme system doubled under the same protein dosage, and the adsorption of CBH I onto cellulose was improved. While replacing only the cellulose-binding domain improved the degradation efficiency of the enzyme system, additional replacement of the linker region resulted in greater enhancement. Improved degradation efficiency due to non-catalytic region replacement was observed under various conditions, including higher cellulose substrate concentration, reduced cellulose crystallinity, use of pretreated straw as a substrate, and degradation at physiological temperature. These findings provide novel insights into the molecular mechanisms underlying crystalline cellulose degradation by filamentous fungi. Full article

This study addresses the challenge of chitosan (CS) being difficult to dissolve in water due to its highly ordered crystalline structure. Chitosan is modified with chloroacetic acid to reduce its crystallinity and enhance its water solubility. Through single-factor experiments, the optimal conditions for preparing carboxymethyl chitosan film (CMCS) were determined: under conditions of 50 °C, a cellulose substrate (CS) concentration of 18.75 g/L, a NaOH concentration of 112.5 g/L, and a chloroacetic acid concentration of 18.75 g/L, the reaction proceeded for 5 h. Under these conditions, the resulting carboxymethyl chitosan film exhibited the best flocculation effect, forming chitosan films in water that had flocculation activity toward mung bean starch protein wastewater. The successful introduction of carboxyl groups at the N and O positions of the chitosan molecular chain, which reduced the crystallinity of chitosan and enhanced its water solubility, was confirmed through analysis using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The prepared carboxymethyl chitosan film (CMCS) was applied in the flocculation recovery of protein. Through single-factor and response surface experiments, the optimal process conditions for flocculating and recovering protein with CMCS were determined: a CMCS dosage of 1.1 g/L, a reaction time of 39.6 min, a reaction temperature of 42.7 °C, and a pH of 5.2. Under these conditions, the protein recovery rate reached 56.97%. The composition and amino acid profile of the flocculated product were analyzed, revealing that the mung bean protein flocculated product contained 62.33% crude protein. The total essential amino acids (EAAs) accounted for 52.91%, non-essential amino acids (NEAAs) for 47.09%, hydrophobic amino acids for 39.56%, and hydrophilic amino acids for 12.67%. The ratio of aromatic to branched-chain amino acids was 0.31, and the ratio of basic to acidic amino acids was 1.68. These findings indicate that the recovered product has high surface activity and good protein stability, foaming ability, and emulsifying properties. Full article

This study evaluated the viability of using the solid residues (bagasse) of the mezcal industry produced with Agave durangensis as a substrate for biogas production, using two chemical pretreatments, acid (HCl) and alkaline (KOH + Ca(OH)₂), to enhance its biodegradability and improve the anaerobic digestion (AD) process. The chemical composition of bagasse was analyzed before and after the chemical pretreatments and then AD experiments were conducted in anaerobic sequential batch reactors (A-SBR) to analyze the effect of pretreatments on biogas production performance. The results showed that acid pretreatment increased cellulose content to 0.606 g, which represented an increase of 34%, and significantly reduced hemicellulose. In contrast, alkaline pretreatment did not show significant changes in cellulose composition, although it caused a swelling of the Agave durangensis mezcal bagasse (Ad-MB) fibers. In terms of biogas production, Ad-MB pretreated with acid (Ad-MB-acid) increased cumulative production by 76% compared to the Agave durangensis mezcal bagasse that was not pretreated (Ad-MB-not pretreated) and by 135% compared to Agave durangensis mezcal bagasse pretreated with an alkaline solution (Ad-MB-alkaline). These results confirmed that Agave durangensis solid waste from the mezcal industry that receives acidic chemical pretreatment has the potential to generate biogas as a sustainable biofuel that can be used to reduce the ecological footprint of this industry. Full article

Reprocessing lignocellulosic waste to obtain new products for industrial purposes is a vital part of circular economy. This paper reports the cellulase production by newly isolated Bacillus methylotrophicus cultured on lignocellulosic agro-industrial by-products, out of which brewer’s spent grain (BSG) was selected as most beneficial. Plackett–Burman design was used for screening medium components, while Box–Behnken design was further applied to model the impact of the three most influential variables. The maximum approximated cellulase activity was 0.469 U/mL (1 U = 1 µmol of reducing sugars/1 min), at 48.6 g/L substrate, 5.3 g/L ammonium sulfate, pH 6.1. The partially purified cellulase was characterized, which demonstrated broad range of optimal pH (6.5–9.4), temperature (50–60 °C), and sensitivity to metals. Changes in lignin and pentosans content was demonstrated as a result of BSG hydrolysis with a cell-free cellulase preparation. The produced enzyme was used for hydrolysis of various chemically pretreated (NaOH and H₂SO₄) cellulosic substrates, where for reused alkali-pretreated BSG (after microbial enzyme production) the saccharification efficiency was at a level of 25%. The cellulolytic potential of the bacterial strain, along with its resistance to ethanol, present a beneficial combination, potentially applicable to aid saccharification of lignocellulosic by-products for biofuel production. Full article

The aim of the present research was to synthesize protective composite layers from biodegradable cellulose and biocompatible, sol–gel-derived silica cryogel. An important task in the present work was to achieve good applicability on distinct (smooth and rough) surfaces of various materials (from metallic to ceramic). The aim was to utilize the composite layers as thermal and electric insulation coating. The investigation put some effort into the enhancement of mechanical strength and the elasticity of the thin layer as well as a reduction in its water solubility. The removal of the alkali content leads successfully to a significant reduction in water solubility (97 wt% → 1–3 wt%). Adhesion properties were measured using a specialized measurement technique developed in our laboratory. Treatments of the substrate surface, such as alkaline or acidic etching (i.e., Na₂CO₃, HF, water glass), mechanical roughening, or the application of a thin alkali-containing primer layer, strongly increase adhesion. SEM analyses revealed the interactions between the matrix and the reinforcement phase and their morphology. Full article

In this study, a novel starch-based adhesive (SBA) was proposed, which mainly involved the synthesis of a carboxyl-terminated hyperbranched polymer using bisphenol A diglycidyl ether (DGEBA) and citric acid as raw materials. Subsequently, starch was modified through hyperbranching to enhance the shear strength and water resistance of the SBA. For this purpose, the feasibility of the reaction between DGEBA and citric acid was analyzed using quantum mechanical simulations. Subsequently, both substances were simulated to synthesize carboxyl-terminated hyperbranched polymers with different ratios. Starch was modified through hyperbranching to establish various models of SBAs, and their properties were estimated using molecular dynamics simulations. Theoretical analysis indicates that a DGEBA-to-citric acid ratio of 3:7 yields a SBA with relatively optimal properties. The solubility parameter of this adhesive is 19.05 (J/cm³)¹/², suggesting strong intermolecular interactions between the hyperbranched polymer and starch. The synthesized adhesive exhibits high cohesive strength, with an estimated water contact angle of up to 138°, indicating good hydrophobicity. Furthermore, the system demonstrates favorable mechanical performance, with a shear modulus of 4.34 GPa and a bulk modulus of 8.80 GPa. Additionally, at this ratio, the SBA exhibits a relatively high interaction energy of −408.01 kcal/mol with the cellulose substrate, suggesting that the adhesive possesses favorable shear strength. Full article

The increasing production of bioplastics worldwide requires sustainable end-of-life solutions to minimize the environmental burden. Anaerobic digestion (AD) has been recognized as a potential technology for valorizing waste and producing renewable energy. However, the inherent resistance of certain bioplastics to degradation under anaerobic conditions requires specific strategies for improvement. Thus, in this review, the anaerobic biodegradability of commonly used bioplastics such as polylactic acid (PLA), polyhydroxybutyrate (PHB), polybutylene adipate-co-terephthalate (PBAT), polybutylene succinate (PBS), polycaprolactone (PCL), and starch- and cellulose-based bioplastics are critically evaluated for various operational parameters, including the temperature, particle size, inoculum-to-substrate ratio (ISR) and polymer type. Special attention is given to process optimization strategies, including pretreatment techniques (mechanical, thermal, hydrothermal, chemical and enzymatic) and co-digestion with nutrient-rich organic substrates, such as food waste and sewage sludge. The combinations of these strategies used for improving hydrolysis kinetics, increasing the methane yield and stabilizing reactor performance are described. In addition, new technologies, such as hydrothermal pretreatment and microbial electrolysis cell-assisted AD, are also considered as prospective strategies for reducing the recalcitrant nature of some bioplastics. While various strategies have enhanced anaerobic degradability, a consistent performance across bioplastic types and operational settings remains a challenge. By integrating key recent findings and limitations alongside pretreatment and co-digestion strategies, this review offers new insights to facilitate the circular use of bioplastics in solid waste management systems. Full article

Cotton waste, a growth medium for Volvariella volvacea, has significant commercial and nutritional value. Under controlled environmental conditions, substrate nutrient composition and microorganisms affect the growth of V. volvacea. In this study, the changes in the nutrient content of the substrate at different stages of fruiting body development were compared based on an 86% waste cotton substrate, and microbial diversity was studied via 16S rRNA analysis. The results indicated that there were significant differences in nutrient content in the substrate at different stages of fruiting body development. The total contents of carbon, nitrogen, and phosphorus initially increased but then decreased due to nutrient absorption and utilization by V. volvacea. It was also found that large amounts of organic nitrogen decomposed into more readily utilizable inorganic nitrogen. The nutritional content and microbial community structure of the substrate during the egg stage significantly differed from those during the other four stages, making the egg stage the most critical period in cultivation. Through correlation analysis between nutrient content and microbial differences, it was found that differential microbial taxa (Beijerinckiaceae, Burkholderiales, Chitinophaga jiangningensis, etc.) with nitrogen fixation, denitrification, and cellulose decomposition functions were significantly related to carbon- and nitrogen-related indicators such as nitrate nitrogen, microbial biomass carbon, and alkali-hydrolyzed nitrogen. These microorganisms play important roles in determining the variation in the nutritional profile of the substrate. This study provides a theoretical basis for promoting the absorption and utilization of nutrients by V. volvacea by altering the structure of the microbial community of the growth substrate. Full article

The present work introduces a sustainable, low-carbon method to fabricate durable, non-toxic superhydrophobic surfaces using bamboo-derived cellulose. Uniform TEMPO-carboxylated cellulose particles (TOC-Ps), approximately 2 μm in diameter, were synthesized through thermal polymerization and spray drying. These particles, featuring a nano-scale convex structure formed by intertwined TOC nanofibers, were applied to substrates and modified with low-surface-energy materials to achieve superhydrophobicity. At an optimal TOC-P mass ratio of 6%, the surface displayed a water contact angle of 156.2° and a sliding angle of 7°. The coating maintained superhydrophobicity after extensive mechanical testing—120 cm of abrasion, 100 bending cycles, and continuous trampling—and exhibited robust chemical stability across harsh conditions, including subjection to high temperatures, UV irradiation, and corrosive solutions (pH 2–12). The hierarchical micro–nano structure was found to enhance both hydrophobicity and durability, offering an environmentally friendly alternative for self-cleaning surfaces, textiles, and building applications. Full article

Laser-generated structures have a huge potential to induce an alignment of biological cells, which may be important for various fields in medicine and biotechnology. We describe the formation of fs-laser-induced micro- and nanostructures for achieving the directed growth of Schwann cells, a type of glial cell that can support the regeneration of nerve pathways by guiding the neuronal axons in the direction of their alignment. Polymer surfaces, i.e., polycarbonate (PC) or cellulose acetate butyrate (CAB), were exposed to the beam of a 1040 nm Yb-based amplified fs-laser system with a pulse length of about 350 fs. With appropriate parameters, the laser exposure resulted in a surface topography with oriented micro-grooves, which, for PC, were covered with nano-ripples. Schwann cell growth on these substrates was inspected after 3 to 5 days of cultivation by means of scanning electron microscopy (SEM). We show that Schwann cells can grow in a certain direction, predetermined by micro-groove or nano-ripple orientation. In contrast, cells cultivated on randomly oriented nanofibers or unstructured surfaces show an omnidirectional growth behavior. This method may be used in the future to produce nerve conduits for the treatment of injuries to the peripheral nervous system. Full article

Oil-contaminated wastewater represents a major source of industrial pollution, posing significant risks to both the environment and human health. Traditional oil–water separation methods, including gravity separation, centrifugal separation, and air flotation, are limited by their processing efficiency and scope of applicability. In recent years, innovative oil–water separation technologies have gained considerable attention, particularly those utilizing adsorption, filtration, and membrane separation, owing to their high efficiency and environmental sustainability. Separation materials derived from biomass substrates—such as cellulose, chitosan, and lignin—along with metal-based membranes and polymeric filters, have shown remarkable performance. This is especially true for superhydrophobic/superoleophilic and stimuli-responsive materials, which excel in separating complex emulsified oil systems. This paper provides a comprehensive overview of the strengths and limitations of current separation technologies and explores the potential applications of multifunctional materials in treating oil-contaminated wastewater, offering both theoretical insights and practical guidance for advancing green, efficient oil–water separation solutions. Full article

Annually, a considerable amount of agricultural waste is produced leading to serious environmental pollution if not managed effectively. A wide range of bio-decomposers, including fungi, bacteria, and actinomycetes may break down the complex agro-residues in an eco-friendly way through secreting many cellulolytic and amylolytic enzymes. The present study aimed at exploring the ability of Frankia to degrade cellulose and starch and identifying the cellulase and α-amylase genes in Frankia genomes for potential agricultural waste degradation. Frankia alni ACN14a and Frankia casuarinae CcI₃ produced clear zones around growing hyphae on carboxymethyl cellulose (CMC) and starch substrates. The hydrolytic index (HI) ranged from 1 to 2.14 reflecting variation in their degradation efficacy. Quantification of CMCase (carboxymethyl cellulase) production in strain ACN14a presented the maximum activity (0.504 U/mL) under 1% CMC after 16 days whereas strain CcI₃ produced a weak activity after 6 days from incubation. Besides, amylase activity in strain ACN14a reached the highest value (3.215 U/mL) after 4 days of growing with 1% starch, while strain CcI₃ had the superior production (3.04 U/mL) after 12 days from 1% starch condition. Data mining and genome blasting led to the identification of multiple genes related to cellulose and starch degradation. Two endoglucanases (celA1, FRAAL4955 and celA2, FRAAL4956), two glycosyl hydrolase family 16 (FRAAL6120 and FRAAL2663), and one glycosyl hydrolase family 16 (Francci3_3843) were predicted in the two genomes. Likewise, the α-amylase genes (FRAAL5900) from Frankia alni ACN14a and (Francci3_3679) from strain CcI₃ were identified. The gene expression of endo-1, 4-beta-glucanase (celA2, FRAAL4956) revealed the maximum increment in its mRNA abundance under 0.25% CMC exposure and showed a 3.3-fold increase. Frankia capability to degrade cellulose and starch represents a critical process in nutrient cycling and environment protection. Full article