Search Results (117)

Background: Carbohydrate-derived chiral ligands are promising tools in asymmetric catalysis due to their structural diversity, chirality, and availability. However, ligands based on galactose or sorbose have been scarcely explored in the enantioselective addition of dialkylzinc reagents to aldehydes. Methods: A series of chiral diols and β-amino alcohols was synthesized from methyl D-glucopyranoside, methyl D-galactopyranoside, and D-fructose. These ligands were tested in the titanium tetraisopropoxide-promoted enantioselective addition of diethylzinc to aromatic and aliphatic aldehydes. Results: Several ligands, particularly those with a D-fructopyranose backbone, exhibited excellent catalytic activity, with conversion rates up to 100% and enantioselectivities up to 96% ee. Notably, this study reports for the first time the use of β-amino alcohols derived from fructose and sorbose in this transformation. Conclusions: Carbohydrate-based ligands represent effective, inexpensive, and structurally versatile scaffolds for developing highly enantioselective catalysts, expanding the utility of sugars in asymmetric organometallic reactions. Full article

The growing need for developing safer and more effective methods for obtaining enantiomers of chiral compounds, particularly those with pharmacological activity, highlights the potential of biocatalysis as an appropriate pharmaceutical research direction. However, low catalytic activity and stability of free enzymes are often among the substantial limitations to the wide application of biocatalysis. Therefore, to overcome these obstacles, new technological procedures are being designed. In this study, we present optimized protocols for the immobilization of Candida antarctica lipase B (CALB) on an octyl- agarose support, ensuring high enantioselectivity in an organic reaction medium. The immobilization procedures (with drying step), including buffers with different pH values and concentrations, as well as the study of the influence of temperature and immobilization time, were presented. It was found that the optimal conditions were provided by citrate buffer with a pH of 4 and a concentration of 300 mM. The immobilized CALB on the octyl-agarose support exhibited high catalytic activity in the kinetic resolution of (R,S)-1-phenylethanol via enantioselective transesterification with isopropenyl acetate in 1,2-dichloropropane (DCP), as a model reaction for lipase activity monitoring on an analytical scale. HPLC analysis demonstrated that the (R)-1-phenylethyl acetate was obtained in an enantiomeric excess of ee_p > 99% at a conversion of approximately 40%, and the enantiomeric ratio was E > 200. Thermal and storage stability studies performed on the immobilized CALB octyl-agarose support confirmed its excellent stability. After 7 days of thermal stability testing at 65 °C in a climatic chamber, the (R)-1-phenylethyl acetate was characterized by enantiomeric excess of ee_p > 99% at a conversion of around 40% (similar values of catalytic parameters to those achieved using a non-stored lipase). The documented high catalytic activity and stability of the developed CALB-octyl-agarose support allow us to consider it as a useful tool for enantioselective transesterification in organic medium. Full article

The efficient employment of chiral porous organic cages (POCs) for asymmetric catalysis is of great significance. In this work, we have synthesized a chiral N-rich organic cage constructed through chiral (S, S)-1,2-cyclohexanediamine and benzene-1,3,5-tricarbaldehyde utilizing dynamic imine chemistry according to the literature. Following reduction with NaBH₄, the resulting amine-based POCs (RCC3) feature appended chiral diamine moieties capable of coordinating Cu²⁺ cations. This Cu²⁺ coordination provides RCC3 with excellent enantioselectivity as a supramolecular nanoreactor in asymmetric decarboxylative Mannich reactions, providing up to 94% ee of the product. We found that the spatial distribution of chiral amine sites and the coordination of Cu²⁺ in the RCC3 have a significant impact on catalytic activity, especially enantioselectivity. This work provides insights into the structure–function relationship within supramolecular catalytic systems Full article

A novel point-chiral six-membered cyclic phosphoric acid was synthesized starting from an enantiopure precursor via a concise three-step route. Its catalytic performance was evaluated in enantioselective three-component Mannich reactions. Under optimized conditions, the catalyst provided good yields and satisfactory enantiomeric excesses (up to 89%). The basic mechanism of the catalysis was also studied by the DFT method. Full article

Chiral covalent organic frameworks (COFs) hold great promise in heterogeneous asymmetric catalysis due to their designable structures and well-defined chiral microenvironments. However, precise control over the pore size of chiral COFs to optimize asymmetric catalytic performance remains challenging. Herein, we designed a proline-derived dihydrazide chiral monomer (L-DBP-Boc), which was subjected to Schiff-base reactions with two aromatic aldehydes of different lengths, 1,3,5-triformyl phloroglucinol (BTA) and 4,4′,4″-(1,3,5-triazine-2,4,6-triyl)tribenzaldehyde (TZ), to construct two hydrazone-linked chiral COFs with distinct pore sizes (L-DBP-BTA COF and L-DBP-TZ COF). Interestingly, the Boc protecting groups were removed in situ during COF synthesis. We systematically investigated the catalytic performance of these two chiral COFs in asymmetric aldol reactions and found that their pore sizes significantly influenced both catalytic activity and enantioselectivity. The large-pore L-DBP-TZ COF (pore size: 3.5 nm) exhibited superior catalytic performance under aqueous conditions at room temperature, achieving a yield of 98% and an enantiomeric excess (ee) value of 78%. In contrast, the small-pore L-DBP-BTA COF (pore size: 2.0 nm) showed poor catalytic performance. Compared to L-DBP-BTA COF, L-DBP-TZ COF demonstrated a 1.69-fold increase in yield and a 1.56-fold enhancement in enantioselectivity, possibly attributed to the facilitated diffusion and transport of substrates and products within the larger pore, thus improving the accessibility of active sites. This study presents a facile synthesis of pyrrolidine-functionalized chiral COFs and establishes the possible structure–activity relationship in their asymmetric catalysis, offering new insights for the design of efficient chiral COF catalysts. Full article

Lipases are enzymes that catalyze the hydrolysis of carboxylic esters at a lipid–water interface and are able to catalyze reactions such as alcoholysis, esterification, transesterification, and enantioselective synthesis in organic media. They are important biocatalysts for biotechnological and industrial applications—such as in the food and flavor industry—and in the production of biopharmaceuticals, biofuels, biopolymers, and detergents. A desirable property of lipases is stereoselectivity for the production of chemicals with high optical purity. In this work, we report the improvement of the enantioselective capabilities of the Geobacillus thermoleovorans CCR11 lipase. By means of a rational design and bioinformatic approaches, six amino acids of the catalytic cavity of the lipase LipTioCCR11 were substituted resulting in an increase in the optimum temperature of the enzyme and in the resistance to the presence of organic solvents in hydrolytic reactions, and in the promotion of the enantioselective recognition of R isomers of carboxylic acids with importance for the pharmaceutical and food industries. Full article

Salens are a class of important ligands and have been widely applied in asymmetric catalytic organic reactions. Enlarged salen-like ligands containing flexible chains were synthesized from L-phenylalanine, ethane/propanediamines, and salicylaldehydes, and successfully utilized in the scandium-catalyzed enantioselective Michael addition of indoles and enones (2-cinnamoylpyridine 1-oxides). The catalytic system demonstrates excellent reactivity and stereoselective control over electron-rich indole substrates with up to 99% yield and 99% enantiomeric excess. The enlarged Salen ligands with flexible and rigid combined linkers fit their coordination with large rare earth elements. Their coordination abilities were tuned by the electronic effect of substituents on their salicylaldehyde moiety, facilitating the construction of excellent chiral environments in the scandium(III)-catalyzed asymmetric Michael addition of indoles to 2-cinnamoylpyridine 1-oxides. Full article

In organic synthesis, the solvent is the chemical compound that represents the largest proportion of the process. However, conventional solvents are often toxic and dangerous for the environment, and an interesting alternative is to replace them by water. In this context, catalyst surfactants allow both organic reagents in water to be solubilized and organic reactions to be catalyzed. This article describes the synthesis of new biobased organocatalytic surfactants soluble in water, composed of a hydrocarbon chain grafted onto an imidazolidinone moiety. The imidazolidinone moiety acts as catalyst, but also as the polar head of the surfactant, while the fatty chain constitutes the hydrophobic tail. The five steps of the synthesis were optimized, respecting the principles of green chemistry, and two organocatalytic surfactants were obtained with a good selectivity. Surface properties in an aqueous medium were then evaluated with the use of tensiometric analysis. Their molecular organization in vesicles was characterized by Dynamic Light Scattering. The presence of vesicles allows reactions to be carried out in an organized aqueous medium. Model catalytic reactions performed in aqueous medium validated the feasibility of replacing conventional hazardous organic solvents. The newly synthesized biobased surfactants showed satisfactory catalytic activity and allowed the expected products to be obtained with good enantioselectivity. Full article

The use of high catalyst loading is required for most of the organocatalyzed asymmetric aldol reactions in organic synthesis, and this often presents challenges during purification and difficulties in catalyst recovery from the reaction mixture. The immobilization of the catalyst onto gold nanoparticles (AuNPs) can change the structural conformations of the catalyst, thereby improving its catalytic activity and reusability. Herein we report on the synthesis of aldolase mimetic peptide coupled to gold nanoparticles (AuNPs) as efficient organocatalysts for asymmetric aldol reaction. AuNPs were synthesized using the Turkevich method. The conjugation of the peptide to AuNPs was characterized using surface plasmon resonance (SPR), Raman and X-ray photoelectron spectroscopy, and transmission electron microscopy (TEM) was used for particle size determination. The produced nanoparticles, whose sizes depended on the reduction method, were quasi-spherical with a relatively narrow size distribution. The peptide–AuNP conjugates were evaluated for aldol reaction catalytic activity between carbonyls p-nitrobenzaldehyde and cyclohexanone. The products were obtained with good yields (up to 85%) and enantioselectivity (up to 94%). The influence of organic solvents, pH and buffer solutions was also investigated. The results showed that the buffer solutions regulated the colloidal stability of AuNPs, resulting in a significant enhancement in the catalytic rate of the peptide–AuNP conjugate. Full article

This study aimed to optimize the kinetic resolution of building blocks for the synthesis of β-blockers using Candida rugosa lipases, which could be potentially used to synthesize enantiomerically pure β-blockers further. Reaction mixtures were incubated in a thermostated shaker. Qualitative and quantitative analyses of the reaction mixtures were performed using chiral stationary phases and the UPLC-IT-TOF system. Of the 24 catalytic systems prepared, a system containing lipase from Candida rugosa MY, [EMIM][BF₄] and toluene as a two-phase reaction medium and isopropenyl acetate as an acetylating agent was optimal. This resulted in a product with high enantiomeric purity produced via biotransformation, whose enantioselectivity was E = 67.5. Using lipases from Candida rugosa enables the enantioselective biotransformation of the β-blockers building block. The biocatalyst used, the reaction environment, and the acetylating agent significantly influence the efficiency of performer kinetic resolutions. The studies made it possible to select an optimum system, a prerequisite for obtaining a product of high enantiomeric purity. As a result of the performed biotransformation, the (S)-enantiomer of the β-blocker derivative was obtained, which can be used to further synthesize enantiomerically pure β-blockers. Full article

Chiral pincer complexes, characterized by their rigid tridentate coordination framework, have emerged as powerful catalysts in asymmetric synthesis. This review provides a comprehensive overview of recent advancements in the development of chiral pincer-type ligands and their corresponding transition metal complexes. We highlight the latest progress in their application across a range of catalytic asymmetric reactions, including the (transfer) hydrogenation of polar and non-polar bonds, hydrophosphination, alkynylation, Friedel-Crafts reactions, enantioselective reductive cyclization of alkynyl-tethered cyclohexadienones, enantioselective hydrosilylation, as well as Aza–Morita–Baylis–Hillman reactions. The structural rigidity and tunability of chiral pincer complexes enable precise control over stereoselectivity, resulting in high enantioselectivity and efficiency in complex molecular transformations. As the field advances, innovations in ligand design and the exploration of new metal centers are expected to expand the scope and utility of these catalysts, bearing significant implications for the synthesis of enantioenriched compounds in pharmaceuticals, materials science, and beyond. Full article

Conformational freedom-restricted peptides, such as stapled peptides, play a crucial role in the advancement of functional peptide development. We synthesized stapled octapeptides using α-carbocyclic α,α-disubstituted α-amino acids, particularly 3-allyloxy-1-aminocyclopentane-1-carboxylic acid, as the crosslink motifs. The organocatalytic capabilities of the synthesized stapled peptides were assessed in an asymmetric nucleophilic epoxidation reaction because the catalytic activities are known to be proportional to α-helicity. Despite incorporating side-chain crosslinks, the enantioselectivities of the epoxidation reaction catalyzed by stapled octapeptides were found to be comparable to those obtained using unstapled peptides. Interestingly, the stapled peptides using α-carbocyclic α,α-disubstituted α-amino acids demonstrated higher reactivities and stereoselectivities (up to 99% ee) compared to stapled peptides derived from (S)-α-(4-pentenyl)alanine, a commonly used motif for stapled peptides. These differences could be attributed to the increased α-helicity of the former stapled peptide in contrast to the latter, as evidenced by the X-ray crystallographic structures of their N-tert-butoxycarbonyl derivatives. Full article

The development of new chiral ligands with simple and modular structure represents a challenging direction in the design of efficient homogeneous transition metal catalysts. Herein, we report on the asymmetric hydrogenation of prochiral ketones catalyzed by the iridium complexes of simple alkane-diyl-based P,N,O-type chiral ligands with a highly modular structure. The role of (i) the P-N and N-O backbone in the potentially tridentate ligands, (ii) the number, position and relative configuration of their stereogenic elements and (iii) the effect of their NH and OH subunits on the activity and enantioselectivity of the catalytic reactions are studied. The systematic variation in the ligand structure and the comparative catalytic experiments shed light on different mechanistic aspects of the iridium-catalyzed reaction. The catalysts containing the simple alkane-diyl-based ligands with central chirality provided high enantioselectivities (up to 98% ee) under optimized reaction conditions and proved to be active and selective even at very high substrate concentrations (100 mmol substrate/mL solvent). Full article

Herein we present the biocatalysed preparation of a mono-N-carbamate-protected precursor of antitumoral Nutlin-3a through enantioselective alkoxycarbonylation of meso-1,2-disubstituted-1,2-diaminoethane using enzyme lipases and dialkyl carbonates as acylating agents. A series of supported or free lipase enzymes were screened in combination with commercially available diallyl, diethyl and dimethyl carbonates. The reactions were conducted at different temperatures, for different reaction times and with variable co-solvent systems to evaluate the effects on the enzyme catalytic activity. The best results in terms of conversion, enantiomeric excess and yield were obtained when lipase from Candida antarctica B (CAL-B) was used with diallyl carbonate (DAC) when conducting the reaction solventless at 75 °C. Full article

The use of lipase immobilized on an octyl-agarose support to obtain the optically pure enantiomers of chiral drugs in reactions carried out in organic solvents is a great challenge for chemical and pharmaceutical sciences. Therefore, it is extremely important to develop optimal procedures to achieve a high enantioselectivity of the biocatalysts in the organic medium. Our paper describes a new approach to biocatalysis performed in an organic solvent with the use of CALB-octyl-agarose support including the application of a polypropylene reactor, an appropriate buffer for immobilization (Tris base—pH 9, 100 mM), a drying step, and then the storage of immobilized lipases in a climatic chamber or a refrigerator. An immobilized lipase B from Candida antarctica (CALB) was used in the kinetic resolution of (R,S)-flurbiprofen by enantioselective esterification with methanol, reaching a high enantiomeric excess (ee_p = 89.6 ± 2.0%). As part of the immobilization optimization, the influence of different buffers was investigated. The effect of the reactor material and the reaction medium on the lipase activity was also studied. Moreover, the stability of the immobilized lipases: lipase from Candida rugosa (CRL) and CALB during storage in various temperature and humidity conditions (climatic chamber and refrigerator) was tested. The application of the immobilized CALB in a polypropylene reactor allowed for receiving over 9-fold higher conversion values compared to the results achieved when conducting the reaction in a glass reactor, as well as approximately 30-fold higher conversion values in comparison with free lipase. The good stability of the CALB-octyl-agarose support was demonstrated. After 7 days of storage in a climatic chamber or refrigerator (with protection from humidity) approximately 60% higher conversion values were obtained compared to the results observed for the immobilized form that had not been stored. The new approach involving the application of the CALB-octyl-agarose support for reactions performed in organic solvents indicates a significant role of the polymer reactor material being used in achieving high catalytic activity. Full article