Search Results (595)

The ability of earth-abundant metals to serve as catalysts for the oxygen reduction reaction is of increasing importance given the prominence of this reaction in several emerging technologies. It is now recognized that both the primary and secondary coordination environments of these catalysts can be modulated to optimize their performance. In this present work, we describe two Co^II complexes [Co^II(PaPy₂Q)](OTf) (1) and [Co^II(PaPy₂N)](OTf) (2) that catalyze chemical and electrochemical dioxygen reduction. Both 1 and 2 contain Co^II centers in a N₅⁻ coordination environment, but 2 has a naphthyridine group that places a nitrogen atom in the secondary coordination sphere. Solid-state X-ray crystallography and solution-state spectroscopic measurements reveal that, apart from this second-sphere nitrogen in 2, complexes 1 and 2 have essentially identical properties. Despite these similarities, 2 performs the chemical reduction of dioxygen ~10-fold more rapidly than 1. In addition, 2 has an enhanced performance in the electrochemical reduction of dioxygen compared to 1. Both complexes yield a significant amount of H₂O₂ in the chemical reduction of dioxygen (>25%). The enhanced catalytic performance of 2 is attributed to the presence of the second-sphere nitrogen atom, which might enable the efficient protonation of cobalt–oxygen intermediates formed during turnover. Full article

In this study, we report the development of a novel magnetized coal fly ash-supported nano-silver composite (AgNPs/MCFA) for dual-functional applications in wastewater treatment: the efficient degradation of methyl orange (MO) dye and broad-spectrum antibacterial activity. The composite was synthesized via a facile impregnation–reduction–sintering route, utilizing sodium citrate as both a reducing and stabilizing agent. The AgNPs/MCFA composite was systematically characterized through multiple analytical techniques, including Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and vibrating sample magnetometry (VSM). The results confirmed the uniform dispersion of AgNPs (average size: 13.97 nm) on the MCFA matrix, where the formation of chemical bonds (Ag-O-Si) contributed to the enhanced stability of the material. Under optimized conditions (0.5 g·L⁻¹ AgNO₃, 250 °C sintering temperature, and 2 h sintering time), AgNPs/MCFA exhibited an exceptional catalytic performance, achieving 99.89% MO degradation within 15 min (pseudo-first-order rate constant k_a = 0.3133 min⁻¹) in the presence of NaBH₄. The composite also demonstrated potent antibacterial efficacy against Escherichia coli (MIC = 0.5 mg·mL⁻¹) and Staphylococcus aureus (MIC = 2 mg·mL⁻¹), attributed to membrane disruption, intracellular content leakage, and reactive oxygen species generation. Remarkably, AgNPs/MCFA retained >90% catalytic and antibacterial efficiency after five reuse cycles, enabled by its magnetic recoverability. By repurposing industrial waste (coal fly ash) as a low-cost carrier, this work provides a sustainable strategy to mitigate nanoparticle aggregation and environmental risks while enhancing multifunctional performance in water remediation. Full article

Polyamide 6,6 (PA6,6) fabrics are widely used in textiles due to their high mechanical strength and chemical stability. However, their inherent flammability and melting behavior under fire pose significant safety challenges. In this study, a dual-layer flame-retardant system was developed by integrating atomic layer deposition (ALD) of ZnO with a phosphorus–silane-based flame retardant (DOPO-ETES). ALD allowed precise control of ZnO layer thickness (50, 84, and 199 nm), ensuring uniform coating. Thermal analysis (TGA) and microscale combustion calorimetry (MCC) revealed that ZnO altered the degradation pathway of PA6,6 through catalytic effects, promoting char formation and reducing heat release. The combination of ZnO and DOPO-ETES resulted in further reductions in heat release rates. However, direct flame tests showed that self-extinguishing behavior was not achieved, emphasizing the limitations related to the melting of PA6,6. TG-IR and cone calorimetry confirmed that ZnO coatings suppressed the release of smoke-related volatiles and incomplete combustion products. These findings highlight the potential of combining metal-based catalytic flame retardants like ZnO with phosphorus-based coatings to improve flame retardancy while addressing the specific challenges of polyamide textiles. This approach may also be adapted to other fabric types and integrated with additional flame retardants, broadening its relevance for textile applications. Full article

Platinum-based catalysts remain the benchmark for the oxygen reduction reaction (ORR) in fuel cells, owing to their exceptional catalytic activity in the harsh chemical environment. However, optimizing Pt utilization and improving performance through support engineering are essential for commercial viability. In this study, we synthesized carbon-supported binary Pt-M (M = Ni, Cu, Co) electrocatalysts to investigate the influence of metal–support interactions on ORR activity. The Pt-M nanoparticles were fabricated on carbon supports, enabling the systematic screening of electronic and structural interactions. Among all compositions, Pt@Co exhibited the highest ORR mass activity, delivering 817 mA mg_Pt⁻¹ at 0.85 V and 464 mA mg_Pt⁻¹ at 0.90 V vs. RHE, surpassing both commercial Pt/C (J.M. 20 wt.%) and its Pt@Ni, Pt@Cu, and Pt@CNT counterparts. Structural and spectroscopic analyses reveal a strong electronic interaction between Pt and Co, leading to localized electron transfer from Co to Pt domains. This electronic modulation facilitates an optimal surface binding energy, enhancing oxygen adsorption–desorption kinetics and ORR activity. These findings highlight the critical role of transition metal–support synergy in the rational design of high-performance Pt-based electrocatalysts for next-generation fuel cell applications. Full article

The selective catalytic reduction of NO_x with CH₄ (CH₄-SCR) holds the potential to simultaneously abate harmful NO_x and CH₄ greenhouse gases. In this study, a series of bimetallic M-In/H-SSZ-39 catalysts (where M represents Cr, Co, Ce, and Fe) were prepared via an ion exchange method and subsequently evaluated for their CH₄-SCR activity. The influences of the preparation parameters, including the metal ion concentration and calcination temperature, as well as the operating conditions, such as the CH₄/NO ratio, O₂ concentration, water vapor content, and gas hourly space velocity (GHSV), on the catalytic activity of the optimal Cr-In/H-SSZ-39 catalyst were meticulously examined. The results revealed that the Cr-In/H-SSZ-39 catalyst exhibited peak CH₄-SCR catalytic performance when the Cr(NO₃)₃ concentration was 0.0075 M, the In(NO₃)₃ concentration was 0.066 M, and the calcination temperature was 500 °C. Under optimal operating conditions, namely GHSV of 10,000 h⁻¹, 400 ppm NO, 800 ppm CH₄, 15 vol% O₂, and 6 vol% H₂O, the NO_x conversion rate reached 93.4%. To shed light on the excellent performance of Cr-In/H-SSZ-39 under humid conditions, a comparative analysis of the crystalline phase, chemical composition, pore structure, surface chemical state, surface acidity, and redox properties of Cr-In/H-SSZ-39 and In/H-SSZ-39 was conducted. The characterization results indicated that the incorporation of Cr into In/H-SSZ-39 enhanced its acidity and also facilitated the generation of InO⁺ active species, which promoted the oxidation of NO and the activation of CH₄, respectively. A synergistic effect was observed between Cr and In species, which significantly improved the redox properties of the catalyst. Consequently, the activated CH₄ could further interact with InO⁺ to produce carbon-containing intermediates such as HCOO⁻, which ultimately reacted with nitrate-based intermediates to yield N₂, CO₂, and H₂O. Full article

ZSM-5 zeolites are primarily used in acid-catalyzed hydrocracking reactions in the petrochemical industry, and it is very important to ensure an adequate number of acidic sites for more efficient catalytic activity. This study investigated the possibility of exchanging sodium ions with hydrogen ions on ZSM-5 zeolite with a molar ratio of (SiO₂/Al₂O₃ = 1000) using an ion-exchange process with acetic acid. By employing the XRD and FT-IR methods, along with chemical analysis of ZSM-5 zeolite samples, the influence of hydrogen ion concentration on the chemical composition and structural characteristics of ZSM-5 zeolite was monitored at different acid concentrations and exchange times. It was shown that ion exchange with acetic acid leads to a significant reduction in sodium content even with less concentrated solutions while maintaining the stability of the crystal structure of ZSM-5 (SiO₂/Al₂O₃ = 1000) and a high degree of crystallinity. Full article

NiS nanoparticles were chemically deposited on the surface of g-C₃N₄, in situ, followed by high-temperature calcination to prepare x-NiS/g-C₃N₄ co-catalyst-based S-scheme heterojunction photocatalysts. Due to the intrinsic charge accumulation preference on specific crystal planes of g-C₃N₄, NiS nanoparticles selectively deposited on its surface and formed a strong interfacial contact, thereby constructing an S-scheme heterojunction with co-catalytic functionality. This structure effectively suppressesd the recombination of electron–hole pairs in the valence band, significantly enhancing the separation efficiency of photogenerated charge carriers, and thereby improving performance in photocatalytic CO₂ reduction. Compared with pure g-C₃N₄, the x-NiS/g-C₃N₄ photocatalysts exhibit superior CO₂ reduction activity. Among them, the sample with 1.0% NiS loading showed the best performance, achieving CO and CH₄ production rates of 27.34 μmol/g and 13.87 μmol/g, respectively, within 4 h. Full article

Wood is a naturally abundant, biodegradable, and renewable material with significant potential as an alternative to petroleum-based materials. However, its inherent heterogeneity, anisotropy, and modest mechanical properties limit its application in high-performance structural uses. Delignification, a critical process in papermaking and biorefining, has emerged as a promising pretreatment technique to enhance the properties of wood for advanced subsequent applications. This process selectively removes lignin while preserving the aligned cellulose structure, thereby improving mechanical strength, dimensional stability, and potential for functionalization. Various delignification methods, including alkaline, acidic, and reductive catalytic fractionation, have been explored to optimize the wood’s structural and chemical properties. When combined with densification or impregnation, delignified wood exhibits superior mechanical performance, making it suitable for a range of applications, including structural materials, optical devices, biomedical applications, and energy storage. This detailed review examines the chemistry and mechanisms of delignification, its impact on the physical and mechanical properties of wood, and its role in developing sustainable, high-performance bio-based materials. Furthermore, challenges and future opportunities in delignification research are discussed, highlighting its potential for next-generation wood-based innovative applications. Full article

With increasing energy demand and depletion of fossil fuels, the search for renewable energy sources has become imperative. Among them, biomass energy has attracted significant attention as it is clean, renewable, and abundant. This review summarizes recent advances in the electroreduction of the biomass-derived platform compound furfural (FF) for producing high-value fuels and chemicals. First, the principles and mechanisms of electrocatalysis are introduced, followed by a detailed analysis of reaction pathways for electrocatalytic hydrogenation, hydrogenolysis, and dimerization. Subsequently, the review highlights the research progress on the electrochemical reduction of FF to hydrofuroin (HDF, a precursor for jet fuel), analyzing its reaction mechanisms and summarizing the effects of catalytic materials and reaction conditions on product selectivity and faradaic efficiency. Additionally, it provides an overview of catalyst selection for both hydrogenation and hydrogenolysis processes. Studies indicate that Cu-based catalysts exhibit superior performance in hydrogenation and hydrogenolysis, with the latter being more favorable under low pH. In contrast, metal-doped carbon catalysts demonstrate enhanced activity in dimerization reactions. Reaction conditions also significantly influence product distribution, with lower reduction potentials generally favoring dimerization. Finally, the challenges and future directions in FF electroreduction are discussed, including the need for deeper understanding of competing pathways, improved electrode stability, and scalable reactor design. The integration of electrocatalytic with renewable energy offers a green and sustainable approach for the efficient utilization of biomass-derived compounds, holding substantial research significance and application potential. Full article

Hexavalent chromium [Cr(VI)] is a hazardous environmental contaminant, and palladium nanoparticles (PdNPs) have shown promise as catalysts for its reduction. This study explores the primary factor influencing the catalytic performance of PdNPs in Cr(VI) reduction by investigating the crystal structure and composition of PdNPs in fungal-based catalysts. Five Pd-loaded catalysts were synthesized by treating fungal biomass with different chemical reagents, resulting in varying Pd(0) contents. The nanoparticle morphology, chemical states, and functional group interactions during Pd adsorption and reduction were investigated using multiple analytical techniques. The results showed that fungal hyphae remained structurally intact throughout the treatment process. PdNPs smaller than 2 nm were observed, with both Pd(0) and PdO present. The proportion of Pd(0) ranged from 6.4% to 37.2%, depending on the chemical reagent used. In addition, functional groups such as phosphate, amine, hydroxyl, and carboxyl were found to play key roles in palladium binding, underscoring the importance of surface chemistry in the adsorption and reduction process. A strong positive correlation was observed between the Pd(0) content and catalytic activity. Notably, the NCPdSF sample (palladium-loaded biomass treated with sodium formate) exhibited the highest Pd(0) content of 59.2% and achieved the most effective Cr(VI) reduction. These results suggest that Pd(0) content is a key determinant of catalytic efficiency in Cr(VI) reduction and that optimizing chemical treatments to enhance Pd(0) levels can substantially improve catalyst performance. Full article

The widespread presence of antibiotics in aquatic environments poses significant ecological and public health risks due to their persistence, antimicrobial activity, and contribution to resistance gene proliferation. This review systematically evaluated the advancements in antibiotic degradation using ionizing radiation (γ-rays and electron beam) from laboratory studies to practical applications. By using keywords such as “antibiotic degradation” and “ionizing irradiation OR gamma radiation OR electron beam,” 328 publications were retrieved from Web of Science, with China contributing 33% of the literature, and a number of global representative studies were selected for in-depth discussion. The analysis encompassed mechanistic insights into oxidative (•OH) and reductive (e_aq⁻) pathways, degradation kinetics influenced by absorbed dose (1–10 kGy), initial antibiotic concentration, pH, and matrix complexity. The results demonstrated ≥90% degradation efficiency for major antibiotic classes (macrolides, β-lactams, quinolones, tetracyclines, and sulfonamides), though mineralization remains suboptimal (<50% TOC removal). Synergistic integration with peroxymonosulfate (PMS), H₂O₂, or O₃ enhances mineralization rates. This review revealed that ionizing radiation is a chemical-free, compatible, and highly efficient technology with effective antibiotic degradation potential. However, it still faces several challenges in practical applications, including incomplete mineralization, matrix complexity in real wastewater, and operating costs. Further improvements and optimization, such as hybrid system development (e.g., coupling electron beam with other conventional technologies, such as flocculation, membrane separation, anaerobic digestion, etc.), catalytic enhancement, and life-cycle assessments of this emerging technology would be helpful for promoting its practical environmental application. Full article

The electrochemical reduction of CO₂ (CO₂RR) to valuable chemicals and fuels is a promising strategy for addressing environmental challenges. Graphitic carbon nitride (g-C₃N₄) is a promising electrocatalyst for CO₂ reduction. However, poor electron transfer and low CO₂ affinity often limit its catalytic performance. In this study, we employ density functional theory (DFT) calculations to systematically investigate the effect of various non-metal dopants (B, P, O, and S) on the electronic structure and CO₂ adsorption properties of g-C₃N₄. Our results demonstrated that O-C₃N₄ preferentially catalyzes the formation of HCOOH with a low limiting potential of −0.12 V. Meanwhile, S-C₃N₄ efficiently promotes the generation of CH₂O, CH₃OH, and CH₄ at a limiting potential of −0.58 V, as well as CO at −0.77 V. These findings provide valuable insights toward the rational design of effective non-metal-doped g-C₃N₄ catalysts for efficient CO₂ conversion. Full article

This study examines a catalyst based on graphitic carbon nitride (g-C₃N₄) for synthesizing glycerol carbonate through the coupling reaction of glycerol and CO₂. In this research, we focus on simultaneously improving CO₂ emission reduction and glycerol valorization by co-doping g-C₃N₄ with phosphorus (P), sulfur (S), magnesium (Mg), and lithium (Li) for a better catalytic performance. The catalysts were prepared through a one-step thermal condensation process and characterized using XRD, SEM, TGA, FTIR, and nitrogen adsorption–desorption techniques. The co-doping further enhanced the surface chemical properties, Lewis acidity, basicity, and thermal stability, evidenced by the lower crystallinity, wider pore, and better catalytic performance as assessed through glycerol carbonylation reaction, optimized using a Box–Behnken design. The MgPSCN catalyst exhibited the highest glycerol conversion (68.72%) and glycerol carbonate yield (44.90%) at 250 °C, using 50 mg catalyst and 10 bar pressure. The model accuracy was validated by ANOVA (R² > 0.99; p values < 0.0001). The results indicated that doping significantly enhanced the catalytic performance, most likely due to improved electron charge transfer and structural distortions within the g-C₃N₄ framework. Such a process highlights the potential of co-doped g-C₃N₄ catalysts for the sustainable glycerol utilization and valorization of CO₂ through a scalable pathway toward green chemical synthesis—an approach that comes in line with worldwide decarbonization goals. Full article

Direct-writing submicron copper circuits on glass with laser precision—without lithography, vacuum deposition, or etching—represents a transformative step in next-generation microfabrication. We present a high-resolution, maskless method for metallizing glass using ultrashort pulse Bessel beam laser processing, followed by silver ion activation and electroless copper plating. The laser-modified glass surface hosts nanoscale chemical defects that promote the in situ reduction of Ag⁺ to metallic Ag⁰ upon exposure to AgNO₃ solution. These silver seeds act as robust catalytic and adhesion sites for subsequent copper growth. Using this approach, we demonstrate circuit traces as narrow as 0.7 µm, featuring excellent uniformity and adhesion. Compared to conventional redistribution-layer (RDL) and under-bump-metallization (UBM) techniques, this process eliminates multiple lithographic and vacuum-based steps, significantly reducing process complexity and production time. The method is scalable and adaptable for applications in transparent electronics, fan-out packaging, and high-density interconnects. Full article

Bimetals—materials composed of two metal components with dissimilar standard reduction–oxidation (redox) potentials—offer unique electronic, optical, and catalytic properties, surpassing monometallic systems. These materials exhibit not only the combined attributes of their constituent metals but also new and novel properties arising from their synergy. Although many reviews have explored the synthesis, properties, and applications of bimetallic systems, none have focused exclusively on iron (Fe)- and aluminum (Al)-based bimetals. This systematic review addresses this gap by providing a comprehensive overview of conventional and emerging techniques for Fe-based and Al-based bimetal synthesis. Specifically, this work systematically reviewed recent studies from 2014 to 2023 using the Scopus, Web of Science (WoS), and Google Scholar databases, following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, and was registered under INPLASY with the registration number INPLASY202540026. Articles were excluded if they were inaccessible, non-English, review articles, conference papers, book chapters, or not directly related to the synthesis of Fe- or Al-based bimetals. Additionally, a bibliometric analysis was performed to evaluate the research trends on the synthesis of Fe-based and Al-based bimetals. Based on the 122 articles analyzed, Fe-based and Al-based bimetal synthesis methods were classified into three types: (i) physical, (ii) chemical, and (iii) biological techniques. Physical methods include mechanical alloying, radiolysis, sonochemical methods, the electrical explosion of metal wires, and magnetic field-assisted laser ablation in liquid (MF-LAL). In comparison, chemical protocols covered reduction, dealloying, supported particle methods, thermogravimetric methods, seed-mediated growth, galvanic replacement, and electrochemical synthesis. Meanwhile, biological techniques utilized plant extracts, chitosan, alginate, and cellulose-based materials as reducing agents and stabilizers during bimetal synthesis. Research works on the synthesis of Fe-based and Al-based bimetals initially declined but increased in 2018, followed by a stable trend, with 50% of the total studies conducted in the last five years. China led in the number of publications (62.3%), followed by Russia, Australia, and India, while Saudi Arabia had the highest number of citations per document (95). RSC Advances was the most active journal, publishing eight papers from 2014 to 2023, while Applied Catalysis B: Environmental had the highest number of citations per document at 203. Among the three synthesis methods, chemical techniques dominated, particularly supported particles, galvanic replacement, and chemical reduction, while biological and physical methods have started gaining interest. Iron–copper (Fe/Cu), iron–aluminum (Fe/Al), and iron–nickel (Fe/Ni) were the most commonly synthesized bimetals in the last 10 years. Finally, this work was funded by DOST-PCIEERD and DOST-ERDT. Full article