Search Results (464)

This paper presents a roughness surface model for Lagrangian simulations that interacts with both temperature and vorticity fields. The chosen problem is the uniform flow around a rough circular cylinder heated with constant temperature under mixed convection. The methodology used is the Temperature Particles Method (TPM), in which both vorticity and temperature fields are discretized in particles to simulate the real flow in a purely Lagrangian form. The simulation is computationally extensive due to the application of the Biot–Savart law for the two fields and the calculation of buoyancy forces, which is alleviated by the use of parallel programming with OpenMP. The simulation of roughness effects for both fields is obtained using a Large Eddy Simulation (LES) model for vorticity, based on the second-order velocity structure function, which is correlated with the thermal diffusivity through the turbulent Prandtl number. In general, the results indicate that roughness increases the drag coefficient, while an increase in the Richardson number reduces this coefficient. Full article

The oil layers in the Dongying Formation offshore oilfield are severely contaminated. The near-wellbore reservoir pore throats are blocked, which seriously affects the development effect. It has become urgent to implement acidizing stimulation measures. However, the target reservoir is deeply buried, has high reservoir pressure, and is highly sensitive. These factors result in high pressure during acidizing operations, a long single-trip time for raising and lowering the tubing string, and high costs. Moreover, acid that is not promptly returned to the surface after acidizing can cause secondary pollution to the reservoir. This work proposes an integrated tubing string to perform reverse displacement and reverse squeeze. With this, acid can be injected into the formation through the annulus between the casing and tubing. The residual acid and its post-acidizing derivative residues are rapidly lifted to the surface by the reciprocating suction action of the return pump. Based on this, the structure and specifications of the acidizing-flowback tubing string are designed through the flow rate analysis method. The tubing string is mainly affected by mechanical effects, including buoyancy, piston effect, flow viscosity effect, helical bending effect, temperature difference effect, and expansion effect. The maximum deformations are 1.4 m, 1.9 m, 0.18 m, 2.7 m, 1.8 m, and 2.5 m, respectively. The total deformation is less than 3 m. Simulation results from three groups of oil wells at different depths indicate that the axial force of the tubing string ranges from 400 to 600 kN. The stress ranges from 260 to 350 MPa, deformation is 1.1–2.4 mm, and the safety factor exceeds 3.0. This can effectively ensure the safety of on-site operations. Based on the actual field conditions, the acidizing-flowback tubing string is evaluated. This verifies the effectiveness of the acidizing-flowback tubing string. This research provides an economical and efficient operation process for acidizing operations in the Dongying Formation offshore oilfield. It achieves the goal of removing reservoir contamination and provides guidance for the unblocking and stimulation of low-permeability and sensitive reservoirs in the middle and deep layers of offshore oilfields. Full article

The strategic positioning of heating and cooling segments within complex non-rectangular geometries has emerged as a critical engineering challenge across multiple industries in thermal management systems for electronic components. This analysis presents a numerical inspection of buoyancy-driven convective flow and thermal transport mechnisms of nanofluids in a parallelogrammic porous geometry. A single discrete heating–cooling segment has been placed along the slanting surfaces of the geometry. The mathematical model is formulated utilizing Darcy’s law, incorporating the Tiwari and Das approach to characterize the thermophysical properties of the nanofluid. The governing model equations corresponding to the physical process are solved numerically using finite-difference-based alternating direction implicit (ADI) and successive line over-relaxation (SLOR) techniques. Computational simulations are performed for various parametric conditions, including different nanoparticle volume fractions ($\varphi =0$–$0.05$), Rayleigh numbers ($Ra={10}^1$–${10}^3$), and parallelogram geometry ($\alpha$) and sidewall ($\gamma$) tilting angles ($-{45}^{°}\le \alpha \le +{45}^{°}$ and $-{45}^{°}\le \gamma \le +{45}^{°}$), while examining the effect of discrete thermal locations. The results reveal a significant decrement in thermal transfer rates with an increasing nanoparticle concentration, particularly at higher Rayleigh numbers. The skewness of the parallelogrammic boundaries is found to substantially influence flow patterns and thermal transport characteristics compared to conventional rectangular enclosures. Further, the discrete placement of heating and cooling sources creates unique thermal plumes that modify circulation patterns within the domain. The predictions suggest profound insights for optimizing thermal management systems by employing nanofluids in non-rectangular porous configurations, with potential applications in geothermal energy extraction, electronic cooling systems, and thermal energy storage devices. Full article

A notable decline in the frequency of sea fog inflows and an increase in low-cloud ceiling height were observed following the construction of the Saemangeum Seawall west of the Gunsan Airport, an area traditionally prone to frequent sea fog events. To the mechanisms underlying these changes, a numerical experiment was conducted using the Weather Research and Forecasting model. An 11-m-high seawall was used as a physical barrier, and an elevated sea surface temperature (SST) was established within the enclosed area to simulate realistic post-construction conditions. The model successfully reconstructed sea fog occurrences, and the cloud–water mixing ratio effectively captured the spatial distribution of sea fog. Deviations from the control experiment showed a consistent pattern of reduced cloud–water mixing ratios near the surface and enhanced concentrations at high levels. Decreased buoyancy frequency in the surface layer enhanced atmospheric instability, inducing upward motion and intensified condensation activity. Increases in the turbulence kinetic energy within the planetary boundary layer (TKE within the PBL), vertical wind shear, and temperature further corroborated the reduction in sea fog and enhanced stratus formation. These findings indicate that the increased SST and seawall significantly influence the modification of the sea fog structure and its inflow dynamics. Full article

This study aims to explore the longitudinal relationship between academic self-efficacy, academic buoyancy, and academic burnout among junior high school students and to reveal the potential mediating role of academic buoyancy. Using cluster sampling, a longitudinal study was conducted on 906 students (mean age = 12.48, 53.3% male) in grades 7 to 9, with three follow-up assessments conducted at four-month intervals. The assessment tools included the Academic Self-Efficacy Questionnaire, the Academic Buoyancy Scale, and the Academic Burnout Questionnaire. The results indicated the following: (1) academic self-efficacy and academic buoyancy exhibit a bidirectional relationship, meaning that academic self-efficacy is associated with increases in academic buoyancy levels four months later, and academic buoyancy also is associated with increases in academic self-efficacy four months later; (2) academic buoyancy is associated with decreases in academic burnout four months later, and academic burnout also is associated with decreases in academic buoyancy four months later; (3) academic self-efficacy is indirectly associated with decreases in academic burnout through the mediating effect of academic buoyancy. Research implications: In educational practice, a focus should be on enhancing students’ academic self-efficacy while effectively reducing academic burnout among junior high school students by fostering the psychological resource of academic buoyancy. Full article

This study investigates how English learning burnout (ELB), academic buoyancy (AB), and foreign language enjoyment (FLE) jointly and independently influence the English academic achievement of Chinese senior high school students. Drawing on the Control-Value Theory of Achievement Emotions, data from 640 students were analyzed using both regression and fuzzy-set Qualitative Comparative Analysis (fsQCA). Regression results indicated that intrinsic enjoyment of language learning was the strongest positive predictor of achievement, whereas exhaustion exerted a notable negative effect. The fsQCA results revealed five pathways to high achievement, such as the combination of high enjoyment and buoyancy with low burnout, which predicted success even without strong teacher support. Conversely, low buoyancy and enjoyment coupled with high burnout characterized underachievement. These findings enrich Control-Value Theory by highlighting asymmetry between the causes of success and failure, and they emphasize the importance of fostering both intrinsic enjoyment and resilience in exam-driven educational contexts. Practical strategies are suggested to help educators reduce negative states and promote sustainable learning engagement. Full article

For sustainable greenhouse design, natural ventilation is a vital component; it depends on the local climate. Therefore, optimizing the greenhouse orientation and vent opening configuration is a critical issue that needs to be addressed for a specific location (e.g., the central region of Saudia Arabia). Experiments were conducted in winter, in a curved-roof, single-span, N-S oriented greenhouse that includes roof and side-wall vents. Five different vent opening arrangements were examined. The outside and inside greenhouse environmental parameters were measured, and the ventilation rate (kg·s⁻¹) and the number of air exchanges per hour (N_a) were estimated for each opening case using a modified energy balance equation. The results showed that the common wind directions are N-S and NW-SE. For effective ventilation, greenhouses should be oriented in the E-W or NE-SW directions. Opening the side-wall vents exhibited the highest wind-driven ventilation rate that is essential to control temperature and humidity at the crop level, while only opening the roof vents is not recommended. In the central region of Saudi Arabia, natural ventilation is sufficient for operating greenhouses (${\overline{N}}_a$ > 30). Opening the roof and side-wall vents (combined wind and buoyancy effects) is the most efficient as long as the greenhouse axis is aligned perpendicular to the wind direction. Such information is essential for sustainable greenhouse management in an arid environment. Full article

This study experimentally investigates single-phase forced convection heat transfer and flow characteristics of Al₂O₃-water nanofluids under rotating hypergravity conditions ranging from 1 g to 5.1 g. While nanofluids offer enhanced thermal properties for advanced cooling applications in aerospace and rotating machinery, their performance under hypergravity remains poorly understood. Experiments employed a custom centrifugal test rig with a horizontal test section (D = 2 mm, L = 200 mm) operating at constant heat flux. Alumina nanoparticles (20–30 nm) were dispersed in deionized water at mass fractions of 0.02–0.5 wt%, with stability validated through transmittance measurements over 72 h. Heat transfer coefficients (HTC), Nusselt numbers (Nu), friction factors (f), and pressure drops were measured across Reynolds numbers from 500 to 30,000. Results demonstrate that hypergravity significantly enhances heat transfer, with HTC increasing by up to 40% at 5.1 g compared to 1 g, most pronounced at the transition from 1 g to 1.41 g. This enhancement is attributed to intensified buoyancy-driven secondary flows quantified by increased Grashof numbers and modified particle distribution. Friction factors increased moderately (15–25%) due to Coriolis effects and enhanced viscous dissipation. Optimal performance occurred at 0.5 wt% concentration, effectively balancing thermal enhancement against pumping penalties. Random forest (RF) and eXtreme gradient boosting (XGBoost) achieved R² = 0.9486 and 0.9625 in predicting HTC, respectively, outperforming traditional correlations (Gnielinski: R² = 0.9124). These findings provide crucial design guidelines for thermal management systems in hypergravity environments, particularly for aerospace propulsion and centrifugal heat exchangers, where gravitational variations significantly impact cooling performance. Full article

Sediment erosion under turbulent wave action is a highly dynamic process shaped by the interaction between wave properties and sediment characteristics. Despite extensive empirical research, the underlying mechanisms of wave-induced erosion remain insufficiently understood, particularly regarding the threshold energy required for particle mobilization and the factors governing displacement patterns. This study employed a custom-built wave flume and a 3D-printed sampler to examine sediment behavior under controlled wave conditions. Rounded glass beads, chosen to eliminate the influence of particle shape, were used as sediment analogs with a similar specific gravity to natural sand. Ten experiments were conducted to systematically assess the effects of particle size, particle number, input voltage (wave power), and water depth on sediment response. The results revealed that (1) only a fraction of particles were mobilized, with the remainder forming stable interlocking structures; (2) the number of displaced particles increased with particle size, particle count, and water depth; (3) a threshold wave power is required to initiate erosion, though buoyancy under shallow conditions reduces this threshold; and (4) wave steepness, rather than voltage or wave height alone, provided the strongest predictor of sediment displacement. These findings highlight the central role of wave steepness in erosion modeling and call for its integration into predictive frameworks. The study concludes with methodological limitations and proposes future research directions, including expanded soil types, large-scale flume testing, and advanced flow field measurements. Full article

Based on the high strength and superior deformation control capabilities of rock strata, a novel cantilever anti-floating ledge has been proposed to resist the floating of underground structures in rock strata. To explore the actual anti-floating effect and working performance of the structure, laboratory shear tests were designed based on the actual project. The shear characteristics and failure evolution process were then discussed using the Particle Flow Code (PFC) numerical simulation. The main conclusions are as follows. The shear stress–shear displacement curve of the cantilever anti-floating ledge can be described as six stages according to the different states of stress and deformation. With the increase in groundwater buoyancy, the damage to the cantilever anti-floating ledge occurs successively from the ledge, the concrete–rock interface, the connection between the ledge and the side wall, and the connection between the ledge and the bottom plate. Local damage and delamination of the interface do not affect the structural strength, but structural cracks should be prevented from continuing to form and connect. It is necessary to pay attention to the stress and deformation state of the crack-prone area mentioned above, improve the reinforcement ratio in the crack-prone area, and strengthen the bond between the concrete and the rock. Full article

This study provides the first comprehensive multiscale evaluation of raw coconut fibers as biosorbents for crude oil removal, encompassing laboratory adsorption tests, mesoscale hydrodynamic simulations, and field trials in marine environments. Fibers were characterized by SEM, FTIR, XRD, XPS, and chemical composition analysis (NREL method), confirming their lignocellulosic nature, high lignin content, and functional groups favorable for hydrocarbon adsorption. At the microscale, a 2⁵⁻¹ fractional factorial design evaluated the influence of dosage, concentration, contact time, temperature, and pH, followed by kinetic and equilibrium model fitting and regeneration tests. Dosage, concentration, and contact time were the most significant factors, while low sensitivity to salinity highlighted the material’s robustness under marine conditions. Adsorption followed pseudo-second-order kinetics, with an equilibrium adsorption capacity of 4.18 ± 0.19 g/g, and it was best described by the Langmuir isotherm, indicating chemisorption and monolayer formation. Mechanical regeneration by centrifugation allowed for reuse for up to five cycles without chemical reagents, aligning with circular economy principles. In mesoscale and field applications, fibers maintained structural integrity, buoyancy, and adsorption efficiency. These results provide strong technical support for the practical use of raw coconut fibers in oil spill response, offering a renewable, accessible, and cost-effective solution for scalable applications in coastal and marine environments. Full article

Currently, Japan’s fishing industry is facing a severe decline in its workforce. As a response, fishing mechanization using small underwater robots is promoted. These robots offer advantages due to their compact size, although their operating time is limited. A major source of this limited operating time is posture stabilization, which requires continuous thruster use and rapidly drains the battery. To reduce power consumption, anchoring the robot to the seabed with anchors is proposed. However, due to neutral buoyancy, the available thrust is limited, making penetration into the seabed difficult and reducing stability. To address this, we focus on composite-shaped anchors and vibration. The anchors combine a conical tip and a cylindrical shaft to achieve both penetrability and holding force. However, a trade-off exists between these functions depending on the tip angle; anchors with larger angles provide better holding capacity but lower penetrability. To overcome this limitation, vibration is applied to reduce soil resistance and facilitate anchor penetration. While vibration is known to aid penetration in saturated soft soils, the effect of tip angle under such conditions remains unclear. This study aims to clarify the optimal tip angle for achieving sufficient penetration and holding performance under vibratory conditions. Experiments in underwater saturated soft soil showed that vibration improves both penetration and holding. This effect was strong in anchors with tip angles optimized for holding force. These findings support the development of energy-efficient anchoring systems for autonomous underwater operations in soft seabed environments. Full article

Understanding the mechanisms behind academic buoyancy, the ability to effectively cope with everyday academic challenges, is essential for identifying the factors and mechanisms that help students maintain their motivation and cope with routine academic pressures. One potential underlying mechanism is reward sensitivity, or the capacity to experience pleasure both in anticipating and receiving reward-related stimuli. We hypothesized that individuals with higher sensitivity to anticipated reward would exhibit greater academic buoyancy. To test this in an academic context, we modified the Monetary Incentive Delay (MID) task into a School Grade Incentive Delay (SGID) task, where participants work towards a fictitious school grade by winning or losing points on each of the trials. In this study, we investigated whether the SGID activates the neural reward circuitry similar to the traditional MID and whether this is associated with academic buoyancy. The SGID task activated key brain regions associated with reward anticipation, validating its use for studying reward processing in academic contexts. Importantly, we found a negative association between academic buoyancy and right amygdala activation during reward anticipation, suggesting that buoyant students may benefit from reduced emotional reactivity when anticipating rewards. Further research in larger samples is needed to capture the full complexity of reward processing in relation to academic buoyancy. Full article

The National Cookstove Program has been launched by the Federal Government of Mexico, attempting to reach one million rural homes by the year 2030. Voluntary ISO emission standards for fine particulate matter (PM_2.5) and carbon monoxide (CO) relate emission rates from stoves to indoor air concentrations using a single zone box model (SZM) to derive performance tiers. Region-specific emission benchmarks for cookstove performance that are linked to estimated benefits in reduced indoor air concentrations and resultant health impacts will be important in product selection. Here we compare the SZM to measured indoor PM_2.5 and CO concentrations for five stove stacking combinations using controlled cooking tests of typical foods from the Purepecha region of Mexico to derive region-specific benchmarks. The results demonstrate that the SZM systematically overpredicted PM_2.5 emissions based on thermal plume effects and ventilation which can be adjusted based on strong relationships (Adjusted r² = 0.96, p < 0.001) with emission rates and air changes per hour. Adjustment of PM_2.5 ISO voluntary standards for systematic bias caused by plume buoyancy and ventilation is important in ensuring that the ISO benchmarks reflect the actual indoor concentrations measured in homes. The ISO benchmarks for CO should be revisited as the indoor concentrations from traditional stoves met the most stringent benchmarks but were in the range of concentrations associated with adverse health impacts in adults and psychosocial impacts in children. Full article

The fast and accurate calculation of the internal temperature rise in the oil-immersed transformer is the premise to realize the thermal health management and load energy evaluation of the in-service transformer. In view of the influence of nanofluids on the heat transfer process of transformer, a numerical simulation algorithm based on lattice Boltzmann method (LBM) and finite difference method (FDM) is proposed to study the heat and mass transfer process inside nano-modified oil-immersed transformer. Firstly, the D2Q9 lattice model is used to solve the fluid and thermal lattice Boltzmann equations inside the oil-immersed transformer at the mesoscopic scale, and the temperature field and velocity field are obtained by macroscopic transformation. Secondly, the electric field distribution inside the oil-immersed transformer is calculated by FDM. The viscous resistance in LBM analysis and the electric field force in FDM analysis, as well as the gravity and buoyancy of particles, are used to explore the motion characteristics of nanoparticles and metal particles. Finally, compared with the thermal ring method and the finite volume method (FVM), the relative error is less than 5%, which verifies the effectiveness of the numerical model and provides a method for studying the internal electrothermal convection of nano-modified oil-immersed transformers. Full article