Search Results (48)

Soil degradation in both agricultural and urban environments is accelerating due to intensive land use, plastic pollution, construction practices, and climate change, threatening ecosystem stability, food security, and carbon storage capacity. This review synthesizes current advances in biopolymeric materials as regenerative alternatives to conventional soil management approaches. Biopolymers derived from natural sources—including polysaccharides, proteins, and lignin-based compounds—are examined for their multifunctional roles in improving soil structure, enhancing water retention, optimizing nutrient delivery, stabilizing slopes, and supporting pollutant immobilization. Recent developments highlight the emergence of stimuli-responsive hydrogels, controlled-release fertilizer matrices, and composite soil conditioners capable of simultaneously addressing water stress, salinity, erosion, and contamination. In parallel, biodegradable agricultural films and in-soil degradable materials offer pathways to reduce microplastic accumulation while maintaining agronomic performance. Beyond agriculture, bio-based construction materials and bio-receptive design strategies extend biopolymeric interventions into the built environment, promoting soil permeability, microbial diversity, and circular material flows. The review emphasizes the need for context-specific formulation, long-term field validation, and life-cycle assessment to ensure environmental safety and scalability. By integrating soil science, polymer chemistry, and regenerative design, biopolymeric systems are described here as tools for restoring soil health and fostering resilient urban–rural ecosystems under conditions of environmental change. Full article

Antioxidant biopolymeric films (ABFs) have emerged as promising bio-based and biodegradable polymer materials for sustainable food packaging, combining environmental sustainability with functional performance. This study identifies convergent design principles governing ABFs through a systematic mapping of research published between 2015 and 2025, organized into thematic discussions covering global trends, material strategies, processing technologies, and structure–property relationships. The analysis reveals a clear transition from biodegradable substitution materials toward performance-driven polymer systems engineered to modulate mass transport phenomena. Polysaccharide- and protein-based matrices dominate current developments due to their chemical functionality and compatibility with natural bioactive compounds; however, their inherent hydrophilicity introduces trade-offs between barrier resistance and controlled release. Recent advances increasingly employ blends, composites, and multilayer architectures to decouple mechanical stability from antioxidant migration. Processing technologies, including casting, extrusion, and multilayer assembly, are shown to play a decisive role in defining diffusion pathways and release kinetics. The findings demonstrate that the effectiveness of ABFs depends primarily on polymer–bioactive interactions and structure–property relationships rather than additive concentration alone. Future progress toward industrial implementation requires scalable fabrication strategies and predictive processing–structure–performance frameworks aligned with circular economy principles. This perspective positions ABFs as functional bio-based polymer systems capable of synchronizing antioxidant release with food oxidation kinetics, contributing to sustainable food packaging solutions. Full article

The incorporation of probiotic bacteria into active packaging systems represents an innovative strategy to enhance food preservation while delivering health benefits to consumers. This review discusses the selection criteria for probiotic strains focusing on their resistance to environmental stressors, antimicrobial activity, and viability in different food matrices and their integration into edible films and coatings. Polysaccharides, proteins, and hydrocolloids are widely used as biopolymeric matrices due to their biocompatibility and functional properties. The efficiency of probiotic packaging largely depends on three factors: the choice of strain, the encapsulation technique (such as spray drying, emulsification, or electrospinning), and the properties of the matrix material. These packaging systems demonstrate strong antimicrobial activity through multiple mechanisms, including bacteriocin production, competition for adhesion sites, and acidification. Applications in dairy, meat, fish, and fresh produce reveal the potential of these technologies to delay spoilage, reduce pathogenic microorganisms, inhibit lipid oxidation, and maintain nutritional and sensory qualities. Moreover, studies emphasize that combining probiotics with prebiotic compounds can improve both microbial stability and functional performance. Despite promising results, challenges remain regarding the industrial scalability and long-term stability of these systems under varied storage conditions. Future research should focus on optimizing formulation parameters, expanding applications across diverse food categories, and integrating smart packaging technologies. Altogether, probiotic-based edible packaging aligns with current demands for sustainable, health-oriented food solutions. Full article

This study proposes a sustainable strategy to valorise strawberry lignocellulosic agro-industrial byproducts through the recovery of antioxidant and antimicrobial compounds (AOM) for use in active edible coatings. Subcritical water extraction (SWE), optimised using response surface methodology, was applied to maximise phenolic content and antioxidant capacity while minimising sugars’ co-extraction. Optimal SWE conditions (120 °C, 5 min, and S/L ratio 40) yielded a total phenolic content (TPC) of 146.9 mg GAE/g DM and an antioxidant activity of 24.8 mg TE/g DM, comparable to ethanolic reflux extraction (138.4 mg GAE/g DM and 23.4 mg TE/g DM). Scale-up in a Parr pressurised reactor achieved 91.2% polyphenol recovery relative to accelerated solvent extraction (ASE). Purification using Amberlite^® XAD 7 resin enhanced TPC purity and antioxidant activity more than 2.5-fold, producing a desorbed fraction with a polyphenol purity of 93.9% (w/w, dry basis) and no detectable sugars. The purified AOM was incorporated (1% w/v) into a 1.5% (w) chitosan solution obtained from Hermetia illucens pupal exuviae to produce a biopolymeric active coating. Application to strawberries was associated with a reduction in fungal infection severity (−72%) and incidence (−66.7%) under natural infection conditions. Although fruit firmness declined during storage, coated samples showed significantly better firmness retention. These results demonstrate the effectiveness of combining chitosan with phenolic extracts obtained by SWE to enhance microbial stability and maintain fruit quality. Full article

The objective of this research is to develop environmentally friendly, risk-free and effective adsorbent composite beads that remove Cu(II) ions from aqueous solutions using cost-effective biopolymers (Carboxymethylcellulose (CMC) and sodium alginate (AL)). The synthesized hydrogel beads (AL@CMC) were dried using two drying modes, namely air-drying and freeze-drying, and characterized using scanning electron microscopy (SEM), Fourier Transform Infrared Spectroscopy (FT-IR), and Brunauer–Emmett–Teller (BET) analysis. The study investigated factors such as pH, adsorbent dosage, reaction time, Cu(II) ions concentration, and temperature to elucidate the adsorption mechanisms involved in removing copper ions. The results indicated that the hydrogel exhibited a maximum adsorption capacity of 99.05 mg·g⁻¹, which is highly competitive compared to previous studies; the AL@CMC beads prepared in this work show a significantly higher adsorption capacity, improved stability due to the interpenetrated biopolymer network, and a clear enhancement from freeze-drying, which greatly increases porosity and active surface area. In addition, the pseudo-second-order nonlinear kinetic model best described the experimental data, implying the chemical nature of the adsorption process. Furthermore, the thermodynamic studies revealed that the adsorption process was endothermic, spontaneous, and homogenous. A Monte Carlo simulation model was utilized to ensure compatibility with the adsorption mechanism, in order to delve deeper into the intricacies of the adsorption process and gain a more comprehensive understanding of its underlying mechanisms and behavior. In conclusion, the prepared hydrogel beads proved to be an effective adsorbent for efficiently removing copper ions, making them a promising solution for addressing Cu(II) ion pollution. Full article

Growing environmental concerns and the need for sustainable materials have accelerated the search for biodegradable alternatives to food packaging. Since nearly half of global plastic production is dedicated to food packaging, and less than 5% is recyclable, developing eco-friendly solutions is urgent. Biopolymeric films enriched with microalgae and cyanobacteria have emerged as promising options due to their bioactive properties. This study screened 38 film-forming formulations combining different biopolymers with varying concentrations of Spirulina (0–5%) to identify the most suitable candidates based on physical and visual characteristics. Films produced with pectin and hydroxypropylmethylcellulose (HPMC) matrices were selected for detailed characterization, including physicochemical, optical, mechanical, thermal, barrier, surface, and functional group analyses, as well as antioxidant activity. The highest elongation at break (%) was observed in the control HPMC film (16.5 ± 3.85), whereas the lowest value was recorded for the pectin film containing 1% Spirulina (2.75 ± 0.49). In parallel, the highest thickness (mm) was found in the pectin film with 5% Spirulina (0.153 ± 0.018), while the lowest thickness occurred in the HPMC film incorporating 1% biomass (0.076 ± 0.004). The incorporation of Spirulina decreased solubility and moisture content while increasing opacity. HPMC-based films demonstrated superior mechanical strength, thermal stability, barrier performance, and significantly higher antioxidant activity compared to pectin films. Antioxidant activity increased with biomass concentration, peaking at 5% (HPMC: 320.08 ± 35.7 µmol TE/g; pectin: 36.92 ± 7.63 µmol TE/g). Overall, the HPMC film containing 1% Spirulina showed the best balance of properties, including mechanical behavior and antioxidant performance, indicating strong potential for food packaging applications, particularly for protecting light-sensitive and oxidation-prone foods. Full article

Biopolymeric films based on chitosan and starch offer an ecological alternative for food protection. Nevertheless, their practical application is often limited by their low mechanical properties and high solubility in aqueous solutions, due to weak interactions between the chains of the biopolymers. One approach to resolve this problem is to obtain biopolymeric films based on (bio)polyelectrolyte complex ((bio)PEC). These films exhibit stronger electrostatic interactions and homogeneous biopolymeric structure. In this study, films based on (bio)PEC were obtained by the casting method, using chitosan and carboxymethyl cassava starch with different degrees of substitution with a biopolymer concentration of 2.5 wt.% at pH = 6. The obtained films were analyzed using the optical and scanning microscopy, color method, ATR-FTIR spectroscopy, thermogravimetry, mechanical analysis under tension, solubility in water, simulated gastric fluid (SGF), and phosphate-buffered saline (PBS) solutions, and contact angle of water. The results demonstrated that the tensile strength and Young’s modulus of films based on (bio)PEC increased by 2–4 times, and the elongation at break by 20% compared to films based on a mixture chitosan and starch. This is due to the increase in the attraction between oppositely charged polyelectrolytes in (bio)PEC films. Additionally, the solubility of (bio)PEC films was reduced by ~40%, 35% and 70% in water, SGF and PBS solutions, respectively, when the carboxymethyl starch with highest degree of substitution was used, and z was near to 1. Full article

Cellulose stands out as a promising alternative to conventional polymers in food packaging due to its abundance, renewability, biodegradability and structural robustness. Despite these advantages, its natural low resistance to water and fats limits its direct application, necessitating the use of protective coatings to enhance its functionality. In this context, the use of biopolymeric coatings such as poly(lactic acid) (PLA), starch, lignin, chitin and chitosan has emerged as a sustainable solution, providing effective barriers against moisture and oils. These coatings not only improve the functional performance of cellulosic substrates but also reduce reliance on fossil-based plastics, fostering compostable systems and supporting a circular economy. This review analyzes recent developments in biopolymer-coated cellulosic packaging materials, focusing on their resistance to water and fats. The aim is to assess their potential for sustainable food packaging applications. The findings highlight how these innovations contribute to global sustainability goals, such as reducing plastic waste, lowering carbon emissions, and decreasing dependence on non-renewable resources. Full article

Mucosal drug delivery is gaining attention for its ability to provide localized treatment with reduced systemic side effects. The vaginal route has been proven effective for managing gynecological conditions, though it poses certain limitations. Biopolymers can help overcome these challenges by enhancing therapeutic efficiency and offering beneficial properties. This study aimed to develop and evaluate hydrogels and their freeze-dried forms (wafers) based on collagen, hydroxypropyl methylcellulose, and gellan gum. Initially, a collagen gel was obtained by extraction from calfskin, which was brought to a concentration of 1% and a physiological pH with 1 M sodium hydroxide solution. This gel was combined with either 2% hydroxypropyl methylcellulose gel, 1.2% gellan gum gel, or both, in different proportions. Thus, five mixed hydrogels were obtained, which, along with the three individual gels (controls), were lyophilized to obtain wafers. Furthermore, the hydrogels were assessed for rheological behavior, while the collagen structural integrity in the presence of the other biopolymers was evaluated using circular dichroism and FT-IR spectroscopy. The wafers were characterized for morphology, wettability, swelling capacity, enzymatic degradation resistance, and in vitro biocompatibility. All hydrogels exhibited non-Newtonian, pseudoplastic behavior and showed collagen structure preservation. The wafers’ characterization showed that gellan gum enhanced the hydrophilicity and enzymatic stability of the samples. In addition, the extracts from the tested samples maintained cell viability and did not affect actin cytoskeleton morphology, indicating a lack of cytotoxic effects. This study emphasizes the importance of evaluating both the physicochemical properties and biocompatibility of biopolymeric supports as a key preliminary step in the development of vaginal drug delivery platforms with biomedical applications in the management of gynecological conditions. Full article

Sorption and advanced oxidative processes (AOPs) are potential strategies for the removal of organic compounds, such as caffeine, from aqueous media. Such strategies tend to be more promising when combined with biopolymeric membranes as sorbents and photocatalyst supports. Therefore, the aim of the present study was to investigate sorption and AOP parameters in the performance of chitosan membranes and chitosan/TiO₂ composite membranes in individual and hybrid systems involving the photolysis, photocatalysis, and sorption of caffeine. Caffeine degradation by photolysis was 19.51 ± 1.14, 28.61 ± 0.05, and 30.64 ± 6.32%, whereas caffeine degradation by photocatalysis with catalytic membrane was 18.33 ± 2.20, 20.83 ± 1.49, and 31.41 ± 3.08% at pH 6, 7, and 8, respectively. In contrast, photocatalysis with the dispersed catalyst achieved degradation of 93.56 ± 2.12, 36.42 ± 2.59, and 31.41 ± 1.07% at pH 6, 7, and 8, respectively. These results indicate that ions present in the buffer solutions affect the net electrical charge on the surface of the composite biomaterial with the change in pH variation, occupying active sorption sites in the structure of the biomaterial, which was characterized by Fourier transform infrared spectrometry, thermogravimetric analysis, differential scanning thermogravimetry, and X-ray diffraction. Thus, it is verified that in a combined process of caffeine removal under UV irradiation and use of chitosan/TiO₂ composite membranes in phosphate-buffered medium, the photolysis mechanism is predominant, with little or no contribution from sorption, and that the TiO₂ catalyst promotes a significant reduction in the percentage of pollutant in the medium only when used dispersed and at low pH. Full article

Film-forming solutions were prepared using Tara gum (TG), with glycerol (GL) as a plasticizer and orange peel powder (OP) as a filler. A TG stock solution (10 g/L) was initially prepared to facilitate homogenization, from which appropriate dilutions were made to obtain final concentrations of 0.6%, 0.8%, and 1.0% (w/v). GL (30% and 50%) and OP (0%, 20%, and 50%) were incorporated based on the dry weight of TG, meaning their amounts were calculated relative to TG content to ensure consistent formulation ratios. Rheological parameters, including the flow behavior index, consistency coefficient, storage modulus (G′), and loss modulus (G″), were characterized via steady shear and oscillatory rheometry. Mechanical properties, such as the Young’s modulus, tensile strength, and elongation at break, were also evaluated. A strong positive correlation (R² = 0.840) was observed between G′ and the Young’s modulus, indicating that solutions with higher internal network strength yield films with greater stiffness. The synergistic interaction between TG and OP was critical: TG primarily enhanced stiffness and mechanical reinforcement, whereas OP improved structural cohesion and stability. GL functioned as a plasticizer, increasing film flexibility while reducing stiffness. These interactions led to a reduction in film solubility by up to 62.43%, particularly in formulations without orange peel powder. In contrast, mechanical strength increased by up to 50.21% in films containing orange peel powder, as those without it exhibited significantly lower tensile strength. Flexibility, expressed as elongation at break, was enhanced by up to 78.86% in formulations with higher glycerol content. Barrier properties were also improved, demonstrated by decreased water vapor permeability and increased hydrophobicity, attributed to the TG–OP synergy. A regression model (R² = 0.928) substantiated the contributions of TG to stiffness, OP to matrix reinforcement, and GL to flexibility modulation. This study underscores the pivotal role of rheological behavior in defining film performance and presents a novel analytical framework applicable to the design of sustainable, high-performance biopolymeric materials. Full article

Bioactive compounds of natural origin are central to the development of nutraceutical formulations. To improve their stability and to target their delivery to the intestinal or colonic tract, alginate/k-carrageenan spherical gels have been produced at different volumetric ratios (100/0, 70/30, 50/50, 30/70, and 0/100 v/v), by means of solution dripping and external gelation. Different drying methods were compared, and only through supercritical technologies was it possible to achieve interpenetrated networks that feature nanometric pore size distribution. Hybrid aerogels inherited the most relevant characteristics of alginate and k-carrageenan: they showed remarkable water uptake capacity (e.g., 50.60 g/g), and stability in aqueous media over large timespans. Naringin release tests in simulated intestinal and colonic fluids proved that it is possible to target drug delivery by choosing intermediate alginate/k-carrageenan ratios. Overall, by means of supercritical gel drying, it is possible to generate advanced biopolymeric aerogels, yielding fully natural interpenetrated networks that valorize the most compelling properties of each species involved. Full article

In the food packaging industry, significant efforts have been dedicated to addressing the pressing market demand for environmentally friendly and sustainable products. Biocomposite films based on compostable and biobased polymers represent a sustainable alternative to conventional packaging materials, offering biodegradability and enhanced functional properties. Additionally, there is growing interest in utilizing waste materials from agriculture and the food industry. This study focuses on the development of multifunctional eco-sustainable biocomposite films by combining poly(lactic acid) (PLA) as a biopolymeric matrix and extracts derived from coffee silverskin (CS), a significant agro-industrial waste byproduct of the coffee roasting process. Extracts of coffee silverskin were obtained via extraction with several solvents. Several properties of the prepared biocomposites were measured using techniques such as scanning electron microscopy (SEM), infrared spectroscopy (FTIR, ATR), differential scanning calorimetry (DSC), and oxygen and water vapor permeability, together with mechanical and physico-chemical characterization and measurements of water content, film solubility, and degree of swelling. The results demonstrate that optimized formulations of PLA/CS biocomposite films exhibit enhanced oxygen barrier properties, reduced permeability, and significant antioxidant activity. These findings underscore the potential for agro-waste valorization in creating eco-friendly food packaging solutions. Full article

Melatonin, a natural hormone with antioxidant, anti-inflammatory, and regenerative properties, has gained increasing attention in tissue engineering for its ability to enhance the therapeutic potential of biopolymeric scaffolds. These scaffolds, designed to mimic the extracellular matrix, provide structural support and a bioactive environment for tissue regeneration. By integrating melatonin, researchers aim to create multifunctional scaffolds that promote cell proliferation, modulate inflammatory responses, and improve wound healing outcomes. Challenges in utilizing melatonin include maintaining its stability under light, heat, and oxygen exposure, and optimizing its release profile for sustained therapeutic effects. Innovative fabrication methods, such as electrospinning, 3D printing, and lyophilization, have enabled precise control over scaffold architecture and melatonin delivery. These techniques ensure enhanced interactions with target tissues and tailored regeneration processes. Combining melatonin with growth factors, cytokines, and antimicrobial agents offers the potential for multifunctional applications, from chronic wound management to bone and nerve regeneration. Continued research in this field promises transformative solutions in regenerative medicine, expanding the clinical applicability of melatonin-enriched scaffolds. This review highlights the current progress, challenges, and opportunities associated with harnessing melatonin’s therapeutic potential within tissue engineering frameworks. Full article

The application of electrospinning technologies for the preparation of mats based on mucoadhesive polysaccharides, such as chitosan (CS), is an attractive strategy for the development of biopolymeric delivery systems for topical corticosteroids. In this work, an electrospinning technique is described for the preparation of CS-based mats doped with halloysite nanotubes (HNTs) with modified release of clobetasol propionate (CP). The optimized composition of the electrospinning solution was determined: 2.4% solution of CS in 46% acetic acid with addition of PEO (10% of CS mass) and HNTs (5% of CS mass); CP was introduced as an ethanol solution at the rate of 2 mg CP per 1 g of the obtained nonwoven material. The process parameters (the electrospinning voltage of 50–65 kV, the rotation speed of the spinning electrode of 10 min⁻¹, and the distance between the electrodes of 24 cm) were also optimized. The developed technology allowed us to obtain homogeneous nanofiber mats with excellent mechanical properties and biphasic drug release patterns (66% of CP released within 0.5 h and 88% of CP released within 6 h). The obtained nanofiber mats maintained the anti-inflammatory activity of corticosteroid at the level of free CP and showed no cytotoxicity. Full article