Search Results (13)

Biohydrogen is considered to be one of the fuels of the future, so there is a justified need to find efficient and cost-effective technologies for its production. This study evaluated the efficiency of two biohydrogen production pathways, specifically biophotolysis and dark fermentation, using Tetraselmis subcordiformis biomass. Microalgae production was performed in three variants, where the separation criterion was the type of culture medium: a control sample (synthetic medium; V1–PCR), agricultural wastewater from hydroponic tomato cultivation (V2–SL-WW), and effluent from a microbial fuel cell (V3–MFC-WW). The highest increase in biomass of T. subcordiformis was obtained in V2–SL-WW—2730 ± 212 mg VS/L, which was also associated with the maximum chlorophyll a content (65.0 ± 5.1 mg Chl-a/L). In biophotolysis, the highest specific hydrogen yields were obtained in V1–PCR (55.3 ± 4.3 mL/g VS) and V2 (54.3 ± 3.7 mL/g VS). The total hydrogen production in these variants was 166 ± 13 mL (V1–PCR) and 163 ± 11 mL (V2–SL-WW), respectively. The average H₂ production rate reached 4.70 ± 0.33 mL/h in V2–SL-WW, and the rate constant (k) was 0.030–0.031 h⁻¹. In anaerobic fermentation, the highest total and specific H₂ production was obtained in V1–PCR, 453 ± 31 mL and 45.3 ± 3.1 mL/g VS, respectively. The qualitative composition of the biogas confirmed a high hydrogen content: 61.4% (biophotolysis, V1) and 41.1% (dark fermentation, V2–SL-WW). The results obtained confirm that T. subcordiformis can be effectively cultivated on waste media and that the biohydrogen production maintains a high technological efficiency through both photolytic and fermentative mechanisms. The medium from hydroponic tomato cultivation (V2–SL-WW) proved to be particularly promising, as it combines high biomass productivity with a satisfactory biohydrogen production profile. Full article

The production of green hydrogen by microalgae is a promising strategy to convert energy of sun light into a carbon-free fuel. Many problems must be solved before large-scale industrial applications. One solution is to find a microalgal species that is easy to grow, easy to manipulate, and that can produce hydrogen open-air, thus in the presence of oxygen, for periods of time as long as possible. In this work we investigate by means of predictive computational models, the [FeFe] hydrogenase enzyme of Nannochloropsis salina, a promising microcalga already used to produce high-value products in salt water. Catalysis of water reduction to hydrogen by [FeFe] hydrogenase occurs in a peculiar iron-sulfur cluster (H-cluster) contained into a conserved H-domain, well represented by the known structure of the single-domain enzyme in Chlamydomonas reinhardtii (457 residues). By combining advanced deep-learning and molecular simulation methods we propose for N. salina a two-domain enzyme architecture hosting five iron-sulfur clusters. The enzyme organization is allowed by the protein size of 708 residues and by its sequence rich in cysteine and histidine residues mostly binding Fe atoms. The structure of an extended F-domain, containing four auxiliary iron-sulfur clusters and interacting with both the reductant ferredoxin and the H-domain, is thus predicted for the first time for microalgal [FeFe] hydrogenase. The structural study is the first step towards further studies of the microalga as a microorganism producing pure hydrogen gas. Full article

Hydrogen (H₂) is a highly efficient and clean energy source with the potential for renewable energy. The production of H₂ from biological routes such as biophotolysis, photofermentation, dark fermentation, and bioelectrochemical production is characterized as a renewable alternative to current production, which is mainly based on energy-intensive electrochemical and thermochemical processes and responsible for the emission of high amounts of environmentally harmful compounds. Dark fermentation is the most efficient and cost-effective method for producing biohydrogen, making it a key research focus. This article offers a comprehensive overview of the dark fermentation process with the aim of enhancing hydrogen productivity and yields. Aspects related to the main substrates used, the inoculum sources and their pretreatment, and physical-chemical parameters of the process are covered. Furthermore, this manuscript addresses topics such as process integration, genetic and metabolic engineering of fermentative microorganisms, and the main types of bioreactors aimed at greater yields and productivity of biohydrogen to enable its production through dark fermentation on a larger scale. Full article

Biohydrogen production is a promising alternative to replace fossil fuels in an environmentally friendly way. In addition to the many available renewable energy sources, the production of “colored” hydrogen and biohydrogen occupies an irreplaceable position due to the undeniable availability of biomass and the need to manage food waste (FW). This article presents the current state of biohydrogen production technology—examples on continents (America, Africa, Asia, Australia and Oceania) and in Europe in terms of the efficiency of dark methane fermentation (CH₄). Biophotolysis processes leading to the production of biohydrogen are indicated: directly and indirectly. The mechanism of the fermentation process of obtaining hydrogen and two-stage hydrogen fermentation are presented. The novelty of this article is the development of innovative trends in the development of the biohydrogen industry in Europe. Various models of the biohydrogen process are presented for different raw materials and proportions of substrates used in co-fermenters. Researchers from China are the undisputed pioneers in the use of renewable energy sources. However, improved energy self-sufficiency and environmental impacts are reflected in the growing number of pilot installations operating in European countries. This also gives hope for rapid progress towards full animal and FW management also in Poland. Full article

The growing interest in hydrogen production arises from its higher energy density, making it an attractive option for energy storage and fuel applications. However, hydrogen production relies heavily on fossil fuels, producing substantial CO₂ emissions. Meanwhile, the organic fraction of municipal solid waste (OFMSW), which constitutes a significant portion of solid waste, predominantly ends up in landfills, leading to methane emissions. Harnessing hydrogen from OFMSW offers an opportunity to offset methane emissions and promote cleaner hydrogen production compared to conventional methods. Various pretreatment methods and production techniques have been explored for hydrogen production from OFMSW, including bio-photolysis, photo-fermentation, microbial electrolysis, and dark fermentation. This study presents a comparative analysis of these methods, evaluating their efficiency, scalability, and potential challenges for hydrogen fuel production from OFMSW. By exploring these avenues, this study found the current hydrogen fuel production scenarios where OFMSW contributes a small portion due to the limited yield. Microbial electrolysis can help to improve the yield and feedstock quality. This study recommends further investigation into the advancement of sustainable hydrogen production and provides insights into overcoming the obstacles associated with this promising field. Full article

In this paper, we present an updated review on the mathematical modeling of different biological methods of hydrogen production. The presented mathematical modeling and methods range from inception to the current state-of-the-art developments in hydrogen production using biological methods. A comparative study was performed along with indications for future research and shortcomings of earlier research. This review will be helpful for all researchers working on different methods of hydrogen production. However, we only covered biological methods such as biophotolysis, fermentation and microbial electrolysis cells, and this list is not exhaustive of all other methods of hydrogen production. Full article

Concerns about rising energy demand, fossil fuel depletion, and global warming have increased interest in developing and utilizing alternate renewable energy sources. Among the available renewable resources, microalgae biomass, a third-generation feedstock, is promising for energy production due to its rich biochemical composition, metabolic elasticity, and ability to produce numerous bioenergy products, including biomethane, biohydrogen, and bioethanol. However, the true potential of microalgae biomass in the future bioenergy economy is yet to be realized. This review provides a comprehensive overview of various biochemical conversion processes (anaerobic digestion, direct biophotolysis, indirect biophotolysis, photo fermentation, dark fermentation, microalgae-catalyzed photo fermentation, microalgae-catalyzed dark fermentation, and traditional alcoholic fermentation by ethanologenic microorganisms) that could be adapted to transform microalgae biomass into different bioenergy products. Recent advances in biochemical conversion processes are compiled and critically analyzed, and their limitations in terms of process viability, efficacy, scalability, and economic and environmental sustainability are highlighted. Based on the current research stage and technological development, biomethane production from anaerobic digestion and bioethanol production from traditional fermentation are identified as promising methods for the future commercialization of microalgae-based bioenergy. However, significant challenges to these technologies’ commercialization remain, including the high microalgae production costs and low energy recovery efficiency. Future research should focus on reducing microalgae production costs, developing an integrated biorefinery approach, and effectively utilizing artificial intelligence tools for process optimization and scale-up to solve the current challenges and accelerate the development of microalgae-based bioenergy. Full article

Several research works have investigated the direct supply of renewable electricity to electrolysis, particularly from photovoltaic (PV) and wind generator (WG) systems. Hydrogen (H₂) production based on solar energy is considered to be the newest solution for sustainable energy. Different technologies based on solar energy which allow hydrogen production are presented to study their benefits and inconveniences. The technology of water decomposition based on renewable energy sources, to produce hydrogen, can be achieved by different processes (photochemical systems; photocatalysis systems, photo-electrolysis systems, bio-photolysis systems, thermolysis systems, thermochemical cycles, steam electrolysis, hybrid processes, and concentrated solar energy systems). A comparison of the different methods for hydrogen production based on PV and WG systems was given in this study. A comparative study of different types of electrolyzers was also presented and discussed. Finally, an economic assessment of green hydrogen production is given. The hydrogen production cost depends on several factors, such as renewable energy sources, electrolysis type, weather conditions, installation cost, and the productivity of hydrogen per day. PV/H₂ and wind/H₂ systems are both suitable in remote and arid areas. Minimum maintenance is required, and a power cycle is not needed to produce electricity. The concentrated CSP/H₂ system needs a power cycle. The hydrogen production cost is higher if using wind/H₂ rather than PV/H₂. The green energy sources are useful for multiple applications, such as hydrogen production, cooling systems, heating, and water desalination. Full article

The development of wastewater treatment systems, including competitive methods for nitrogen and phosphorus removal, is focused on intensifying final technological effects with due care taken for economic and environmental concerns. Given the possibility of integrating wastewater treatment processes with biofuel production, the prospective seems to be technologies harnessing microalgal biomass. The present study aimed to verify the feasibility of applying T. subcordiformis genus microalgae as the third stage of the dairy wastewater treatment process and to determine microalgae biomass production effectiveness and hydrogen yield in the biophotolysis process. The study proved that microalgae cultivation with dairy wastewater was nearly 35% less effective compared to that with a chemically pure medium. Nitrogen and phosphorus compounds contaminating wastewater were found to represent an available source of nutrients for T. subcordiformis population. The volume of hydrogen produced ranged from 116 ± 7 cm³ to 162 ± 7 cm³, and the percentage of H₂ content in the biogas ranged from 55.4 ± 2.2% to 57.2 ± 4.1%. A significantly higher hydrogen yield per initial biomass concentration, reaching 69 ± 4.2 cm³/g_o.d.m., was determined in the variant with wastewater accounting for 50% of the culture medium. The respective value noted in the control respirometer was 54 ± 2.1 cm³/g_o.d.m. Full article

Due to its characteristics, hydrogen is considered the energy carrier of the future. Its use as a fuel generates reduced pollution, as if burned it almost exclusively produces water vapor. Hydrogen can be produced from numerous sources, both of fossil and renewable origin, and with as many production processes, which can use renewable or non-renewable energy sources. To achieve carbon neutrality, the sources must necessarily be renewable, and the production processes themselves must use renewable energy sources. In this review article the main characteristics of the most used hydrogen production methods are summarized, mainly focusing on renewable feedstocks, furthermore a series of relevant articles published in the last year, are reviewed. The production methods are grouped according to the type of energy they use; and at the end of each section the strengths and limitations of the processes are highlighted. The conclusions compare the main characteristics of the production processes studied and contextualize their possible use. Full article

Biohydrogen is a clean and viable energy carrier generated through various green and renewable energy sources such as biomass. This review focused on the application of membrane bioreactors (MBRs), emphasizing the combination of these devices with biological processes, for bio-derived hydrogen production. Direct biophotolysis, indirect biophotolysis, photo-fermentation, dark fermentation, and conventional techniques are discussed as the common methods of biohydrogen production. The anaerobic process membrane bioreactors (AnMBRs) technology is presented and discussed as a preferable choice for producing biohydrogen due to its low cost and the ability of overcoming problems posed by carbon emissions. General features of AnMBRs and operational parameters are comprehensively overviewed. Although MBRs are being used as a well-established and mature technology with many full-scale plants around the world, membrane fouling still remains a serious obstacle and a future challenge. Therefore, this review highlights the main benefits and drawbacks of MBRs application, also discussing the comparison between organic and inorganic membranes utilization to determine which may constitute the best solution for providing pure hydrogen. Nevertheless, research is still needed to overcome remaining barriers to practical applications such as low yields and production rates, and to identify biohydrogen as one of the most appealing renewable energies in the future. Full article

Chlamydomonas reinhardtii cy6Nac2.49 is a genetically modified algal strain that activates photosynthesis in a cyclical manner, so that photosynthesis is not active constitutively in the presence of oxygen, but is turned on only in response to a metabolic trigger (anaerobiosis). Here, we further investigated hydrogen production by this strain comparing it with the parental wild-type strain under photoheterotrophic conditions in regular tris-acetate-phosphate (TAP) medium with a 10-h:14-h light/dark regime. Unlike the wild-type, whose level of H₂ production remained low during illumination, H₂ production in the mutant strain increased gradually with each subsequent light period, and by the final light period was significantly higher than the wild-type. The relatively low Photosystem II (PSII) activity of the mutant culture was shown by low fluorescence yield both in the dark (Fv/Fm) and in the light (δF/Fm’) periods. Measurement of oxygen evolution confirmed the low photosynthetic activity of the mutant cells, which gradually accumulated O₂ to a lesser extent than the wild-type, thus allowing the mutant strain to maintain hydrogenase activity over a longer time period and to gradually accumulate H₂ during periods of illumination. Therefore, controllable expression of PSII can be used to increase hydrogen production under nutrient replete conditions, thus avoiding many of the limitations associated with nutrient deprivation approaches sometimes used to promote hydrogen production. Full article

Among the various renewable energy sources, biohydrogen is gaining a lot of traction as it has very high efficiency of conversion to usable power with less pollutant generation. The various technologies available for the production of biohydrogen from lignocellulosic biomass such as direct biophotolysis, indirect biophotolysis, photo, and dark fermentations have some drawbacks (e.g., low yield and slower production rate, etc.), which limits their practical application. Among these, metabolic engineering is presently the most promising for the production of biohydrogen as it overcomes most of the limitations in other technologies. Microbial electrolysis is another recent technology that is progressing very rapidly. However, it is the dark fermentation approach, followed by photo fermentation, which seem closer to commercialization. Biohydrogen production from lignocellulosic biomass is particularly suitable for relatively small and decentralized systems and it can be considered as an important sustainable and renewable energy source. The comprehensive life cycle assessment (LCA) of biohydrogen production from lignocellulosic biomass and its comparison with other biofuels can be a tool for policy decisions. In this paper, we discuss the various possible approaches for producing biohydrogen from lignocellulosic biomass which is an globally available abundant resource. The main technological challenges are discussed in detail, followed by potential solutions. Full article