Search Results (295)

Patients undergo total knee arthroplasty (TKA) at younger ages with the expectation that the devices will perform well over two to three decades. During this time, the ultra-high molecular weight polyethylene (UHMWPE) bearing material properties of the implant may change due to aging induced by radiation and oxygen diffusion or other effects. Vitamin E or other antioxidants are promoted since several years to improve the oxidation resistance of UHMWPE. To compare the effectivity of these substances against established materials, a six weeks aging process was used and the chemical, mechanical and bio-tribological properties were analysed. Highly crosslinked and two weeks aged UHMWPE served as a reference for the currently established aging standards and virgin UHMWPE was aged for six weeks to separate the effects of crosslinking and vitamin E blending. Six weeks artificially aging changed the chemical, mechanical and bio-tribological properties of cross-linked UHMWPE significantly compared to only two weeks artificially aging, leading to cracks and delamination during the highly demanding activities wear test. The degradative effect of extended aging was also observed for virgin UHMWPE. These observations are in good accordance to retrieval findings. Minor changes on the chemical properties were observed for the cross-linked UHWMPE blended with vitamin E without impact on the mechanical and bio-tribological properties. Full article

This systematic review aimed to evaluate the effectiveness of teriparatide (TP) in guided bone regeneration (GBR). An electronic search without language or date restrictions was performed in PubMed, Web of Science, Scopus, Scielo, and gray literature for articles published until June 2025. Inclusion criteria considered studies evaluating the effect of TP on bone regeneration, analyzed using SYRCLE’s Risk of Bias tool. Twenty-four preclinical studies were included, covering diverse craniofacial models (mandibular, calvarial, extraction sockets, sinus augmentation, distraction osteogenesis, segmental defects) and employing systemic or local TP administration. Teriparatide consistently enhanced osteogenesis, graft integration, angiogenesis, and mineralization, with potentiated effects when combined with various biomaterials, including polyethylene glycol (PEG), hydroxyapatite/tricalcium phosphate (HA/TCP), biphasic calcium phosphate (BCP), octacalcium phosphate collagen (OCP/Col), enamel matrix derivatives (EMDs), autografts, allografts, xenografts (Bio-Oss), strontium ranelate, and bioactive glass. Critically, most studies presented a moderate-to-high risk of bias, with insufficient randomization, allocation concealment, and blinding, which limited the internal validity of the findings. TP shows promising osteoanabolic potential in guided bone regeneration, enhancing bone formation, angiogenesis, and scaffold integration across preclinical models. Nonetheless, its translation to clinical practice requires well-designed human randomized controlled trials to define optimal dosing strategies, long-term safety, and its role in oral and craniomaxillofacial surgical applications. Full article

Biodegradable mulch films (BDMs) are considered a promising solution for mitigating plastic residue pollution in agroecosystems. However, the degradation behavior and ecological impacts of their residues on soil–plant systems remain unclear. Here, a pot experiment was conducted using an acidic purple soil (AS), a neutral purple soil (NS), and a calcareous purple soil (CS) to investigate the degradation of 1% (w/w) microplastics derived from polyethylene mulch film (PE-MPs) and polybutylene adipate terephthalate/polylactic acid (PBAT/PLA) mulch film (Bio-MPs), as well as their effects on soil properties, bacterial communities, and radish growth. PE-MPs degraded slightly, while the degradation of Bio-MPs followed the order of NS > CS > AS. PE-MPs and Bio-MPs enhanced the nitrification and radish growth in AS but had no significant effects on soil properties and radish growth in CS. Bio-MPs notably increased the relative abundance of PBAT/PLA degradation-related bacteria, such as Ramlibacter, Bradyrhizobium, and Microbacterium, across the three soils. In NS, Bio-MPs raised soil pH and enriched nitrogen-fixing and denitrifying bacteria, leading to a decrease in NO₃⁻-N content and radish biomass. Overall, the effects of Bio-MPs on soil–plant systems varied with soil properties, which are closely related to their degradation rates. These findings highlight the need to assess the ecological risks of BDM residues before their large-scale use in agriculture. Full article

Non-intentionally added substances (NIAS) in plastic food contact materials represent a critical undercharacterized chemical safety concern, caused by their inherent diversity, potential toxicity, and regulatory challenges. This review synthesizes recent advances and persistent gaps in NIAS analysis, with a primary focus on analytical workflows for non-targeted analysis, alongside a consideration of risk assessment and toxicological prioritization frameworks. Conventional plastics (e.g., polyethylene, polypropylene, or polyethylene terephthalate) as well as emerging materials (e.g., bioplastics and recycled polymers) exhibit different NIAS profiles, including oligomers, degradation products, additives, and contaminants, requiring specific approaches for migration testing, extraction, and detection. Advanced techniques, such as ultra-high-performance liquid chromatography or two-dimensional gas chromatography coupled with high-resolution mass spectrometry, have enabled non-targeted analysis approaches. However, the field remains constrained by spectral library gaps, limited reference standards, and inconsistent data processing protocols, resulting in heavy reliance on tentative identifications. Risk assessment procedures mainly employ the Threshold of Toxicological Concern and classification by Cramer’s rules. Nevertheless, addressing genotoxicity, mixture effects, and novel hazards from recycled or bio-based polymers remains challenging with these approaches. Future priorities and efforts may include expanding spectral databases, harmonizing analytical protocols, and integrating in vitro bioassays with computational toxicology to refine hazard characterization. Full article

The global biobased plastics market is on an upward trajectory due to the quest for a clean/sustainable environment and the growing concerns over climate change. This study used a meta-analysis approach to investigate the global trend in the research evolution and development of bio-based plastics research from 1990 to 2023. The publication records of 2742 articles were retrieved from the Web of Science data collection using the following key terms: “bioplastic* or biodegradable plastic* or biobased plastic* or biodegradable polyester* or biobased polyester* or biodegradable polyethylene* or biobased polyethylene*”. The analysis showed that scientific productivity generally increased across the spectrum of the survey timelines, with the highest publication of 331 articles recorded in 2023. The articles were published in 863 sources by 10,408 authors, with an annual growth rate of 13.55%. China demonstrated the highest number of publications recorded, with 404 articles within the survey period, followed by the United States, with 303 articles. The international collaboration was recorded at 20.86%, while the average citation per article was 27.99. The swift advancement in biodegradable plastic research, as indicated by relevant metrics, highlights the current research trends and underscores the importance of bio-based plastics in promoting a sustainable environment and a circular economy. Full article

2,5-Furandicarboxylic acid (FDCA) is a bio-based platform chemical with high potential to replace terephthalic acid in polymer production, particularly for polyethylene furanoate (PEF), a biopolymer with superior thermal and barrier properties. This study investigates the selective oxidation of 5-hydroxymethylfurfural (HMF) into FDCA using nickel-based heterogeneous catalysts, aiming at a cost-effective and sustainable alternative to noble metal catalysts. A series of nickel oxide catalysts were synthesized and screened. The NiOx catalyst synthesized without thermal treatment via Route B showed the best performance, achieving a FDCA yield of 11.77%, selectivity of 27.41%, and concentration of 0.9 g/L under preliminary conditions. Reaction kinetics revealed that the controlled addition of NaClO enhanced FDCA yield by 2.28 times. Optimization using a 2³ factorial design identified the optimal conditions as 6% (w/v) catalyst concentration, 25 °C, and a NaClO:HMF molar ratio of 12:1, leading to 34.14% yield and 42.57% selectivity. The NiOx catalyst maintained its activity over five successive cycles, indicating good recyclability. Moreover, NiOx demonstrated catalytic activity with crude HMF derived from glucose dehydration, confirming its practical applicability. These results support the potential of nickel-based catalysts in sustainable FDCA production, contributing to the advancement of bio-based polymer synthesis. Full article

Bio-nanocomposites represent an advanced class of materials that combine the unique properties of nanomaterials with biopolymers, enhancing mechanical, electrical and thermal properties while ensuring biodegradability, biocompatibility and sustainability. These materials are gaining increasing attention, particularly in biomedical applications, due to their ability to interact with biological systems in ways that conventional materials cannot. Graphene and graphene oxide (GO), two of the most well-known nanocarbon-based materials, have garnered substantial interest in bio-nanocomposite research because of their extraordinary properties such as high surface area, excellent electrical conductivity, mechanical strength and biocompatibility. The integration of graphene-based nanomaterials within biopolymers, such as polysaccharides and proteins, forms a new class of bio-nanocomposites that can be tailored for a wide range of biological applications. This review explores the synthesis methods, properties and biotechnological applications of graphene-based bio-nanocomposites, with a particular focus on polysaccharide-based and protein-based composites. Emphasis is placed on the biotechnological potential of these materials, including drug delivery, tissue engineering, wound healing, antimicrobial activities and industrial food applications. Additionally, biodegradable polymers such as polylactic acid, hyaluronic acid and polyethylene glycol, which play a crucial role in biotechnological applications, will be discussed. Full article

Plastic film mulching is widely used in protected agriculture. However, the residues of various types of plastic films, as a consequence, severely affect soil quality. The most widely promoted alternative strategy is the use of biodegradable plastic films. Nevertheless, the research on the effects of different types of plastic films on soil properties remains insufficient. This study explored the impacts of different plastic film mulching on the physicochemical properties and microbial communities of soils for pepper cultivation, with three treatments: traditional polyethylene film (PE-Ctr), PBAT biodegradable film (PBAT bio), and reinforced polyethylene film (RPE). The results showed that the soil pH value was the highest in PE-Ctr treatment, and the soil organic matter content was higher in the biodegradable film treatment, while the electrical conductivity (EC), nitrate, and some cations (Ca²⁺, Mg²⁺) were higher in the RPE treatment. The contents of available trace element Zn, Fe, and Mn increased in the PBAT bio treatment. The bacterial richness and evenness indices were higher in PBAT bio treatment than those of other treatments. The fungal community had a relatively high richness, but a lower evenness, compared to the PE-Ctr and PBAT bio treatments. The use of different plastic films significantly affected the composition of soil bacteria, while differences in the composition of soil fungi were only observed between the PBAT bio and RPE treatments. Proteobacteria, Acidobacteriota, and Actinobacteriota were the most dominant bacterial phyla, and Ascomycota and Mortierellomycota were the dominant fungal phylum across all treatments. FAPROTAX functional prediction showed that the abundances of multiple functions of soil bacteria were higher in the RPE treatment, and the chemoheterotrophy function was higher in the PE treatment. FUNGuild analysis indicated that the trophic types and ecological function groups of soil fungi were more abundant in the PBAT bio treatment. Full article

The growing need for healthy and sustainable food alternatives has led to a rapid increase in vegan burgers on the market. Specifically, plant-based burgers using legumes as a protein substitute are amongst the most widespread choices for consumers. While these products can offer environmental benefits over traditional meat-based options, further optimization in both ecological and economic aspects can be achieved. This study conducted a life cycle assessment (LCA) and life cycle costing (LCC) analysis to evaluate and optimize the environmental and economic life cycle of a legume-based vegan burger. LCA was performed in accordance with the recommendations of the ISO 14040 and 14044 series, and ReCiPe 2016 Hierarchist served as the impact assessment methodology. For this purpose, a base case scenario, relying on imported raw materials and conventional packaging for a legume-based vegan burger, was established to serve as the comparison benchmark, and various alternative scenarios were examined, focusing on minimizing the distance between cultivation and processing areas for key legume ingredients and improving packaging materials. The results indicate that reducing transportation distances for raw ingredients and using bio-polyethylene packaging significantly enhance sustainability. Specifically, the legume-based vegan burger of the base case scenario had a carbon footprint of 1.30 kg CO₂ eq. and a total life cycle cost of EUR 2.43 per two pieces. In contrast, the optimized scenario, which incorporated shorter transportation distances and bio-polyethylene packaging, achieved a carbon footprint of 0.51 kg CO₂ eq. and a reduced cost of EUR 2.37. The findings of the present work highlight the potential for further environmental and economic improvements in vegan burger production through logistics optimization and selection of climate-friendly packaging solutions, thus contributing to sustainable development. Full article

Hot-pressing densification is an effective method to enhance the mechanical properties of wood; however, excessively high pressing temperatures can cause thermal degradation of wood components, compromising these improvements. In this study, aminated lignin (AL), with improved water solubility and reactive amino groups facilitating crosslinking, was utilized as a bio-based amine curing agent for the water-soluble, low-molecular-weight epoxy compound polyethylene glycol diglycidyl ether (PEGDGE). The PEGDGE-AL modifier was applied for wood impregnation, followed by hot-pressing densification at a relatively low temperature of 120 °C, to enhance the mechanical properties of wood. The chemical composition of AL was analyzed using Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR), and X-ray photoelectron spectroscopy (XPS). The gelation and curing behavior of the PEGDGE-AL modifier demonstrated its ability to readily form a network structure at both room temperature and elevated temperatures. The impact strength of densified wood (DW) modified with 12 wt% PEGDGE and 8 wt% AL, denoted as 12PEGDGE+8AL-DW, exhibited an impact strength of 15.2 kJ/m², representing a 72% increase compared to untreated wood (UW). The modulus of rupture (MOR) and modulus of elasticity (MOE) reached 241.1 MPa and 14.6 GPa, respectively, corresponding to 60% and 75% improvements over UW. Furthermore, the 24 h water uptake and thickness swelling of 12PEGDGE+8AL-DW were 45.2% and 24.7%, which were 11% and 43% lower than those of water-impregnated and hot-pressed densified wood (W-DW), respectively. This study provides a low-temperature route for wood densification while contributing to the valorization of lignin in high-performance material applications. Full article

Biocomposites are defined as eco-friendly materials from an environmental point of view. Because of the importance of this class of materials, their study is important, especially in moist and heated conditions. In this sense, this work aims to evaluate the transient behavior of moisture absorption and mechanical performance of biocomposites composed of a matrix of high-density biopolyethylene (originated from ethanol produced from sugarcane) filled with curauá vegetable fiber and organophilic montmorillonite clay. For this purpose, dry biocomposites filled with organophilic montmorillonite clay and curauá fiber (1, 3, and 5 wt.%) were prepared using a hand lay-up technique and subjected to moisture absorption and mechanical (flexural and impact tests) characterizations at different times. The experiments were carried out at water bath temperatures of 30 °C and 70 °C. The results have proven the strong influence of chemical composition and temperature on the moisture absorption behavior of biocomposites across time. For a higher percentage of reinforcement on the polymeric matrix, a higher moisture migration rate was verified, reaching a higher hygroscopic equilibrium condition at 16.9% for 5 wt.% of curauá fiber and 10.25% for 5 wt.% of montmorillonite clay particles. In contrast, the mechanical properties of all of the biocomposites were strongly reduced with an increasing moisture content, especially at higher fiber content and water bath temperature conditions. The innovative aspects of this research are related to the study of a new material and its transient mechanical behavior in dry and wet conditions. Full article

This paper presents an experimental investigation of six different types of composite sandwich panels manufactured from waste-based materials, which are comprised of two different types of skins (made from hemp and recycled PET (Polyethylene terephthalate) fabrics with bio-epoxy resin) and three different cores (composite wood, recycled plastic, and styrofoam) materials. The skins of these sandwich panels were investigated under five different environmental conditions (normal air, water, hygrothermal, saline solution, and 80 °C elevated temperature) over seven months to evaluate their durability performance. In addition, the tensile and dynamic mechanical properties of those sandwich panels were studied. The bending behavior of cores and sandwich panels was also investigated and compared. The results indicated that elevated temperatures are 30% more detrimental to fiber composite laminates than normal water. Composite laminates made of hemp are more sensitive to environmental conditions than composite laminates made of recycled PET. A higher-density core makes panels more rigid and less susceptible to indentation failure. The flexible plastic cores are found to be up to 25% more effective at increasing the strength of sandwich panels than brittle wood cores. Full article

To address the problem of environmental pollution caused by the extensive use of low-density polyethylene (LDPE) mulch film, this study developed a novel sprayable mulch using natural fibers and biodegradable polymers. Urea–formaldehyde resin (UF), strengthened with polyvinyl alcohol (PVA), was used as a modifier to induce beneficial physicochemical structural changes in PVA-modified urea–formaldehyde (PUF) resins. Characterization of these resins was conducted using Fourier transformation infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). Preparation of the biodegradable mulch was conducted using Xuan paper waste residue (XP) as an enhancer, with PUF as the auxiliary agent. The resulting film (PUF-XP) was examined for differences in thickness, morphological characterization, and rate of weight loss, and the effects of different covering films on cucumber growth, root development, soil temperature, and weed control were evaluated. Characterization reveals that when the PVA content was 4% (W4UF), the film had the lowest free formaldehyde content (0.26%) and highest elongation at break (5.70%). In addition, W4UF could easily undergo thermal degradation at 278.4 °C and possessed a close-knit, three-dimensional structural network. W4UF was then mixed with paper powder and water in various proportions to produce three mulch films (BioT1, BioT2, and BioT3) that demonstrated excellent water retention and heat preservation and inhibited weed growth by 68.8–96.8%. Compared to no mulching (NM), BioT1 increased both the specific root length and root density, as well as improved the plant height, stem diameter, and total biomass of the cucumbers by 43.5%, 34.1%, and 33.9%, respectively. Therefore, a mass ratio of paper powder, water, and W4UF of 1:30:2 produced a biodegradable mulch film that could be used as an alternative to LDPE, mitigating the environmental pollution rendered by synthetic plastic mulch films and offering the potential for a sustainable agricultural application. Full article

Poly(lactic acid) (PLA) is one of the most important bio-based and industrial compostable materials in food packaging. Its barrier properties towards oxygen and moisture are well documented. However, data on barrier properties of PLA towards organic molecules are scarce in the literature. This study investigated the diffusion of various organic molecules, including n-alkanes, 1-alcohols, 2-ketones, ethers, esters, amines, and aromatics, in two commercial PLA films with thicknesses of 20 µm and 30 µm. The diffusion coefficient (D_P) values were determined from lag time in permeation tests conducted at temperatures ranging from 20 °C to 90 °C. The films were also characterized in terms of crystallinity, rigid and mobile amorphous fractions, and molecular weight. Activation energies (E_A) were calculated based on the temperature dependence of the D_P using the Arrhenius approach. In total, 290 D_P values for 55 individual substances were determined, and 38 E_A values were derived from these data. The E_A correlated well with the molecular volume of the investigated substances. Moreover, the pre-exponential factor D₀ showed a correlation with E_A. These correlations enabled the establishment of diffusion modeling parameters for PLA, allowing the prediction of D_P for untested substances. The diffusion behavior of PLA was further compared with the literature data for polyethylene terephthalate and polyethylene naphthalate, providing insights into the relative performance of these materials. Full article

The study examined composites composed of curauá fibers (10%) and a high-density bio-based polyethylene (HDBPE) matrix, emphasizing the effects of processing methods on their final properties. In addition, plant-derived oils were applied as compatibilizers to improve the interfacial adhesion between the hydrophilic fibers and the hydrophobic HDBPE, thereby supporting the process’s sustainability. The comparative analysis of HDBPE/curauá fiber/plant-based oil composites utilized distinct methodologies: compounding with an internal mixer, followed by thermopressing and mixture composition using a twin-screw extruder with subsequent injection molding. Castor oil (CO), canola oil (CA), or epoxidized soybean oil (OSE) were employed as compatibilizers (5%). All composites displayed high levels of crystallinity (up to 86%) compared to neat HDBPE (67%), likely due to interactions with curauá fibers and compatibilizers. The use of twin-screw extruder/injection molding produced composites with higher impact and flexural strength/modulus-assessed at 5%(approximately 222 J/m to 290 J/m; 22/700 MPa to 26/880 MPa, respectively), considerably exceeding those formed via internal mixer/thermopressing (approximately 110 J/m to 123 J/m; 14/600 MPa to 20/700 MPa). Micrographs of the composites indicated that the extruder separated the fiber bundles into smaller-diameter units, which may have facilitated the transfer of load from the matrix to the fibers, optimizing the composite’s mechanical performance. As a compatibilizer, CO enhanced both properties and, when combined with the twin-screw extruder/injection technique, emerged as the optimal choice for HDBPE/curauá fiber composites. Full article