Search Results (3,530)

An innovative dispersive liquid–liquid microextraction technique utilizing a solid dispersion was established for the quantification of triazine herbicides in environmental water samples. Naturally derived monoterpenoids were utilized as eco-friendly extraction solvents, markedly decreasing the reliance on harmful extraction solvents. A small amount of Pop Rocks candy served as a solid dispersant; the rapid release of carbon dioxide promoted the generation of fine monoterpenoid droplets, effectively replacing conventional hazardous liquid dispersants. The solidification technique of floating organic droplets facilitated the effective phase separation of monoterpenoids from aqueous samples, thereby obviating the need for centrifugation. Triazine herbicides exhibited good linearity within the concentration range of 0.008–0.8 mg/L with correlation coefficients above 0.99 and detection limits of 0.002 mg/L. The proposed method was effectively implemented on surface and groundwater samples, attaining recoveries between 86.4% and 98.0%. Molecular docking analysis suggests a spontaneous binding between the monoterpenoid and triazine herbicides. A comprehensive green assessment utilizing two evaluation tools confirmed the excellent environmental performance of the method. This technique offers superior greenness and simplicity compared with conventional techniques, demonstrating strong potential for application in the environmental analysis of pesticide residues. Full article

A sustainable hybrid material, CuO/Cu₂O, was synthesized using an aqueous extract of Curcuma longa L. as a reducing and stabilizing agent. The material was characterized by UV-Vis spectroscopy, FTIR, XRD, SEM, EDX, and TEM. XRD analysis revealed peaks corresponding to CuO and Cu₂O phases with crystallite sizes of 15.88 nm and 16.71 nm, respectively. TEM images showed nearly spherical particles with some agglomeration and an average particle diameter of 8.17 nm. The hybrid material exhibited catalytic activity toward the synthesis of 1,2,3-triazoles in water, under low catalyst loading and mild reaction conditions. This work highlights the potential of Curcuma longa-mediated synthesis as a low-cost, eco-friendly alternative for producing efficient catalysts, contributing to the advancement of green chemistry and sustainable nanomaterial applications in organic synthesis. Full article

High-energy methods dominate the development of lipid nanoparticles but often require specialized equipment that increases production costs. Low-energy approaches, particularly those free of organic solvents, offer a promising alternative. This study aimed to obtain nanostructured lipid carriers (NLCs) using a solvent-free, low-energy process combining microemulsification and phase inversion. Cetearyl alcohol and PEG-40 hydrogenated castor oil were selected as the solid lipid and surfactant, respectively; the formulation and process were optimized through a Box–Behnken Design. Incorporation of the ionic surfactant extended colloidal stability, while the poloxamer in the aqueous phase enhanced steric stabilization. Resveratrol was efficiently encapsulated (E.E. = 98%), contributing to reduced particle size (291 nm), improved homogeneity (PDI = 0.25), and positive surface charge (+43 mV). Scale-up yielded stable particles carrying resveratrol with a mean size of 507 nm, PDI = 0.24, and ZP = +52 mV. The optimized formulation remained stable for 90 days at 8 °C. In vitro release demonstrated a sustained and controlled release profile, with significantly lower resveratrol release compared to the free compound. Thermal analysis confirmed drug incorporation within the lipid matrix, while transmission electron microscopy (TEM) revealed spherical particles (~200 nm) and SAXS indicated a nanostructure of ~50 nm. Overall, this study demonstrates that solvent-free, low-energy processing can produce stable and scalable NLC formulations, successfully encapsulating resveratrol with favorable physicochemical properties and controlled release behavior. These findings highlight a simple, cost-effective strategy for developing lipid-based nanocarriers with potential applications in drug delivery. Full article

The increasing demand for lithium-ion batteries (LIBs) has intensified the need for efficient lithium (Li) recovery from secondary sources. This study focuses on anti-solvent crystallization for the recovery of high-purity lithium hydroxide monohydrate (LiOH·H₂O) from a Li-rich leachate, derived from the flue dust of a pilot-scale pyrometallurgical process for LIB material recycling. To optimize product yield and purity, a series of experiments were performed, focusing on the influence of parameters such as solvent type, organic-to-aqueous (O/A) volumetric ratio, crystallization time, stirring rate, and anti-solvent addition rate. Acetone was identified as the most effective anti-solvent, producing rectangular cuboid crystals with approximately 90% Li recovery and around 95% purity, under optimized conditions (O/A = 4, 3 h, 150 rpm, and solvent flow rate of 5 mL/min). The flow rate influenced crystal morphology and impurity entrapment, with 5 mL/min favoring nucleation-dominated crystallization regime, producing ~20 μm of well-dispersed crystals with reduced impurity incorporation. SEM-EDS, surface washing, and gradual dissolution of obtained LiOH·H₂O crystals revealed that the impurities sodium (Na), potassium (K), aluminum (Al), calcium (Ca) and chromium (Cr) were crystallized as conglomerates. It was found that Na, K, Al, and Ca primarily crystallized as highly soluble conglomerates, while Cr was crystallized as a lowly soluble conglomerate impurity. In contrast Zn was distributed throughout the crystal bulk, suggesting either the entrapment of soluble zincate species within the growing crystals or the formation of mixed Li-Zn phase. Therefore, to achieve battery-grade purity, further purification measures are necessary. Full article

Reversed-phase high-performance liquid chromatography (RP-HPLC) remains one of the most widely applied analytical techniques in the development and quality control testing of finished pharmaceutical products. The combination of gradient chromatographic methods with diode-array detection (DAD) enhances selectivity, ensuring accuracy and reliability when testing drugs with diverse chemical properties in a single dosage form (i.e., fixed-dose combination (FDC) products). In this study, an RP-DAD-HPLC method was developed for the quantitative analysis of clofazimine (CFZ) and pyrazinamide (PZA) for inclusion in an FDC topical drug delivery system. Chromatographic separation was achieved using a C18 column (4.6 mm × 150 mm, 5 µm particle size) with gradient elution at 1 mL/min, employing 0.1% aqueous formic acid and acetonitrile (mobile phases). PZA and CFZ were detected at 254 nm and 284 nm, respectively. The method was validated in accordance with ICH Q2 guidelines, assessing specificity (considering interference from solvents, product matrix, and degradation products), linearity (7.8–500.0 µg/mL, r² = 0.9999), system repeatability (%RSD ≤ 2.7%), and intermediate precision (25–500 µg/mL, %RSD ≤ 0.85%). Method robustness was evaluated using a three-level Box–Behnken design (BBD) with response surface methodology (RSM) to assess the effects of variations in detection wavelength, mobile phase flow rate, and column temperature. Full article

This study evaluates the effectiveness of air pollution control measures in Xi’an, China, by investigating long-term changes in the concentrations, optical properties, and sources of black carbon (BC) and brown carbon (BrC). Wintertime observations of PM_2.5 carbonaceous aerosols were conducted over multiple years using a continuous Aethalometer. The data were analyzed using advanced aethalometer models, potential source contribution function (PSCF) analysis, and generalized additive models (GAMs) to deconstruct emission sources and formation pathways. Our results revealed a significant decrease in the mass concentration and light absorption coefficient of BC (b_abs-BC) between the earlier and later study periods, indicating successful emission reductions. In contrast, the light absorption from BrC (b_abs-BrC) remained relatively stable, suggesting persistent and distinct emission sources. Source apportionment analysis demonstrated a temporal shift in dominant regional influences, from biomass burning in the initial years to coal combustion in later years. In addition, GAMs showed that the primary driver for liquid fuel-derived BC transitioned from gasoline to diesel vehicle emissions. For solid fuels, residential coal combustion consistently contributed over 50% of BC, highlighting that improvements in coal combustion technology were effective in reducing BC emissions. Furthermore, a substantial fraction of BrC was increased, with nocturnal peaks associated with high relative humidity, emphasizing the aqueous-phase formation influences. Collectively, these findings demonstrated that although certain control strategies successfully mitigated BC, the persistent challenge of BrC pollution necessitates targeted measures addressing secondary formation and primary fossil fuel sources. Full article

This review examines the feasibility of electrochemical synthesis of poly-L-arginine (PArg) using repetitive cyclic voltammetry in neutral aqueous phosphate-buffered saline. Previous studies on electrochemical deposition of PArg onto different carbonaceous electrode materials are discussed with respect to the already reported mechanistic models. Some controversial interpretations are of interest, predominantly the formation of peptide bonds during the electropolymerisation of L-arginine. Several alternative anodic pathways are considered via the possibilities and limitations of ways of attaching L-arginine molecules to the electrode surface. Furthermore, the role of oxygen-containing surface groups is discussed, as this aspect has been largely overlooked in the context of L-arginine deposition, despite the O-terminating character of the electrode surface and its effect on the reactivity of the nucleophilic guanidine group in L-arginine. Also, the application of extremely high potentials around +2 V vs. Ag/AgCl/3 mol L⁻¹ KCl is considered, as it can lead to the generation of reactive oxygen species that may interfere with or even govern the entire deposition process. Thus, the absence of such considerations may raise doubts about the peptide nature of the electrochemically assisted polymerisation of this basic amino acid. Finally, it seems that the identity of the electrochemically synthesised PArg does not correspond to that of this polymer prepared by conventional methods, such as solid-phase peptide synthesis, solution-phase synthesis, or N-carboxy-anhydride polymerisation, and therefore the whole process remains unproved. Full article

This study evaluates the accuracy of various Geographic Information System interpolation methods in predicting the stratified spatial distribution of organic pollutants (Benzene, Total Petroleum Hydrocarbons [TPH], and Methyl Tert-butyl Ether [MTBE]) in groundwater at a petrochemical-contaminated site. Given the limitations of traditional monitoring methods in predicting spatial distribution, this study focuses on the spatial computational prediction of volatile organic compound concentrations at a former petrochemical industrial site. Three interpolation methods—Inverse Distance Weighting (IDW), Radial Basis Function (RBF), and Ordinary Kriging (OK)—were applied and evaluated. Prediction accuracy was assessed using leave-one-out cross-validation, with performance quantified through key metrics: Root Mean Square Error, Coefficient of Determination, and Spearman’s Rank Correlation Coefficient. Results demonstrate significant variations in optimal prediction methods depending on pollutant type and depth stratum. For pollutants predominantly enriched in shallow and middle layers (Benzene, TPH), OK yielded the highest accuracy and stability. Conversely, for predictions of pollutants primarily concentrated in deeper layers, RBF achieved superior performance. IDW consistently underperformed across all strata and pollutants. All interpolation methods generally exhibited systematic overestimation of pollutant concentrations (mean cross-validation error > 0). Through a hierarchical evaluation of the accuracy and interpolation effectiveness of these methods, this study develops a more accurate modeling framework to describe the composite groundwater contamination patterns at petrochemical sites. This study systematically evaluates the spatial prediction accuracy of various non-aqueous phase liquid species under differing groundwater-table depths, identifies the most robust interpolation method, and thereby provides a benchmark for enhancing predictive fidelity in subsurface contaminant mapping. Full article

Lost circulation in oil-based drilling fluids (OBDFs) remains difficult to mitigate because particulate lost circulation materials depend on bridging/packing and gel systems for aqueous media often lack OBDF compatibility and controllable in situ sealing. A dual-precursor oil–water biphasic metal–organic supramolecular gel enables rapid in situ sealing in OBDF loss zones. The optimized formulation uses an oil-phase to aqueous gelling-solution volume ratio of 10:3, with 2.0 wt% Span 85, 12.5 wt% TXP-4, and 5.0 wt% NaAlO₂. Apparent-viscosity measurements and ATR–FTIR analysis were used to evaluate the effects of temperature, time, pH, and shear on MOSG gelation. Furthermore, the structural characteristics and performances of MOSGs were systematically investigated by combining microstructural characterization, thermogravimetric analysis, rheological tests, simulated fracture-plugging experiments, and anti-shear evaluations. The results indicate that elevated temperatures (30–70 °C) and mildly alkaline conditions in the aqueous gelling solution (pH ≈ 8.10–8.30) promote P–O–Al coordination and strengthen hydrogen bonding, thereby facilitating the formation of a three-dimensional network. In contrast, strong shear disrupts the nascent network and delays gelation. The optimized MOSGs rapidly exhibit pronounced viscoelasticity and thermal resistance (~193 °C); under high shear (380 rpm), the viscosity retention exceeds 60% and the viscosity recovery exceeds 70%. In plugging tests, MOSG forms a dense sealing layer, achieving a pressure-bearing gradient of 2.27 MPa/m in simulated permeable formations and markedly improving the fracture pressure-bearing capacity in simulated fractured formations. Full article

Curcumin is a polyphenolic compound isolated from Curcuma longa, which is widely recognized for its therapeutic properties: particularly its strong anti-inflammatory and antioxidant activities. However, its practical incorporation into functional foods, especially aqueous dairy beverages, is severely hindered by its extremely low water solubility, poor chemical stability (notably at the near-neutral pH of milk), and very limited oral bioavailability. This review provides a critical synthesis of the literature published in the last two decades, with a focus on the development and application of food-grade oil-in-water (O/W) nanoemulsions to advanced colloidal delivery systems. It covers the fundamental principles of nanoemulsion formulation, including the selection of the oil phase, surfactants, and stabilizers, as well as both high-energy and low-energy fabrication techniques. It further examines the integration of these nano-delivery systems into dairy matrices (milk, yogurt, cheese), highlighting key interactions between nanoemulsion droplets and native dairy constituents such as casein micelles and whey proteins. Critically, findings indicate that nanoencapsulation not only enhances curcumin’s solubility but also protects it from chemical degradation during industrial processes, including pasteurization and sterilization. Moreover, the dairy matrix structure plays a key role in modulating curcumin bioaccessibility, with fortified products frequently exhibiting enhanced stability, shelf life, and sensory attributes. Finally, key technological challenges addressed the heterogeneous global regulatory landscape surrounding biopolymers and future trends: most notably, the growing shift toward “clean-label” biopolymer-based delivery systems. Full article

This study examined cast AZ31 magnesium alloy and its variant containing micro-alloying elements of Y and Ca (AZXW alloy), evaluating their potential as anode materials in magnesium–air batteries. The AZXW alloy was fabricated via two manufacturing techniques: casting and extrusion. The synergistic influence of Y and Ca, in conjunction with the production procedure, on the microstructure, electrochemical characteristics, and anodic discharge behavior of the examined alloys was investigated. The addition of Y and Ca results in the formation of secondary phases that affect grain size, particle size, and distribution, as well as the electrochemical performance and discharge properties of the Mg–air battery constructed for this study, over 24 h or until fully discharged. This work demonstrates the potential to enhance discharge performance and electrochemical behavior by adjusting the aqueous electrolyte solution in the battery through the incorporation of Citric Acid (C.A) at varying concentrations. The incorporation of citric acid into the aqueous electrolyte improves battery stability and specific energy as long as citric acid is present in the solution. Magnesium hydroxide (Mg(OH)₂) begins to form on the anode surface as its concentration progressively decreases due to complexation with dissolved magnesium ions. This diminishes the effective anode area over time, ultimately resulting in the distinctive “knee-type” collapse characteristic of electrolytes containing citric acid. Full article

This study addresses the limited understanding of how build orientation and aggressive environments jointly affect the mechanical reliability of L-PBF 316L stainless steel. Specimens were fabricated in vertical, edge, and flat orientations and exposed for 360 h to 1 M H₂SO₄, 3.5 wt.% NaCl, and dry air oxidation at 800 °C. Tensile tests and microstructural analyses revealed strong anisotropy: edge and flat builds showed higher tensile and yield strength, while vertical builds exhibited greater ductility. Aqueous environments caused surface degradation and moderate strength loss, most severe in vertical samples. High-temperature oxidation induced σ-phase precipitation, increasing tensile strength (~20%) but reducing ductility and yield strength. These findings highlight the critical role of building orientation and service conditions in ensuring long-term performance of L-PBF 316L stainless steel. Full article

Direct hydroxylation of benzene to phenol using hydrogen peroxide is a cornerstone of sustainable green chemistry. This paper presents the results of a stability study of an iron-containing mordenite catalyst in the liquid-phase hydroxylation of benzene to phenol with a 30% aqueous hydrogen peroxide solution. The study utilizes a combination of catalytic activity measurements, dynamic light scattering (DLS), and electron paramagnetic resonance (EPR) spectra. The system is initially shown to exhibit high phenol selectivity; however, over time, DLS measurements indicate aggregation of the catalyst particles with an increase in the average particle diameter from 1.8 to 2.6 μm and the formation of byproducts–dihydroxybenzenes. Iron is present predominantly as magnetite nanoparticles (Fe₃O₄) ~10 nm in diameter, stabilized on the outer surface of mordenite, with minor leaching (<10%) due to the formation of iron ion complexes with ascorbic acid as a result of the latter’s interaction with magnetite particles. Using a thermodynamic approach based on the Ulich formalism (first and second approximations), it is shown that the reaction of benzene hydroxylation H₂O₂ in the liquid phase is thermodynamically quite favorable (ΔG° = −(289–292) kJ·mol⁻¹ in the range of 293–343 K, K = 1044–1052). It is shown that ascorbic acid acts as a redox mediator (reducing Fe³⁺ to Fe²⁺) and a regulator of the catalytic medium activity. The stability of the catalytic system is examined in terms of the Lyapunov criterion: it is shown that the total Gibbs free energy (including the surface contribution) can be considered as a Lyapunov functional describing the evolution of the system toward a steady state. Ultrasonic (US) treatment of the catalytic system is shown to redisperse aggregated particles and restore its activity. It is established that the catalytic activity is due to nanosized Fe₃O₄ particles, which react with H₂O₂ to form hydroxyl radicals responsible for the selective hydroxylation of benzene to phenol. Full article

The growing demand for biodegradable and functional packaging has driven research toward polysaccharide-based materials with improved performance. In this study, sodium alginate films were modified using natural deep eutectic solvents (NADES) and acorn polyphenolic extract to enhance their antimicrobial, mechanical, and thermal properties. The films were acquired by solvent casting and characterized through mechanical, spectroscopic, thermal, and microbiological analyses. Both NADES and the polyphenolic extract enhanced tensile strength and flexibility through additional hydrogen bonding within the alginate network, while the extract also introduced antioxidant functionality. Among all tested formulations, the A4E2 film exhibited the most balanced performance. FTIR spectra revealed hydrogen bonding between the film components, and thermogravimetric analysis showed an approximately 15 °C (F-EXT) and 20 °C (F-DES) shift in the main DTG degradation peak, indicating enhanced thermal stability. Controlled-release experiments demonstrated the gradual diffusion of phenolic compounds in aqueous, acidic, and fatty simulants, with an initial release phase within the first 6 h followed by sustained release up to 48 h, confirming the films’ suitability for various food environments. The combined modification reduced the growth of Escherichia coli and Staphylococcus aureus by 30–35%, with inhibition zone diameters reaching 27.52 ± 2.87 mm and 25.68 ± 1.52 mm, respectively, evidencing synergistic antimicrobial activity. These results highlight the potential of NADES- and extract-modified alginate films as sustainable materials for active food packaging applications. Full article

The increasing discharge of recalcitrant organic dyes from the textile industry necessitates the development of efficient and sustainable wastewater treatment technologies. This study reports the successful eco-friendly fabrication of magnetically separable cerium–manganese ferrite (Ce-MnFe₂O₄) nanocatalysts via a one-pot green synthesis route, utilizing an aqueous extract of Brachychiton populneus leaves. The structural, morphological, magnetic, and optical properties of the synthesized nanocatalysts were systematically investigated. X-ray diffraction (XRD) analysis confirmed the formation of a phase-pure cubic spinel structure, with evidence of Ce³⁺ ion incorporation leading to lattice expansion and the formation of beneficial oxygen vacancies. The composite material exhibited superparamagnetic behavior with a high saturation magnetization of 38.7 emu/g, which facilitates efficient magnetic separation and recovery. Optical studies revealed a direct bandgap of 2.33 eV, enabling significant photocatalytic activity under visible light irradiation. The Ce-MnFe₂O₄ nanocatalyst demonstrated superior performance, achieving degradation efficiencies of 96% for methylene blue and 98% for Congo Red within 90 min. Furthermore, the catalyst demonstrated good operational stability, maintaining 62% of its initial degradation efficiency for CR and 51% for MB after five consecutive reuse cycles. These results underscore the potential of this green-synthesized, magnetically recoverable nanocatalyst as a highly effective and sustainable solution for the remediation of dye-contaminated industrial effluents. Full article