Search Results (2,312)

Natural zeolites have gained attention as low-cost adsorbents for the removal of heavy metals (HMs) from wastewater. However, their performance can be compromised by the presence of competing cations such as ammonium (NH₄⁺). This study investigated the competitive adsorption and desorption dynamics of NH₄⁺ and six HMs (Cd, Cr, Cu, Ni, Pb, and Zn) on two natural zeolites. Batch and column experiments using synthetic wastewater were conducted to evaluate the effects of different NH₄⁺ concentrations, pH, and particle size on HM removal efficiency and desorption effects. Results showed that increasing NH₄⁺ concentrations significantly reduce HM adsorption, with total capacity decreasing by ~45% at 100 mg/L NH₄-N in kinetic tests. Adsorption isotherms of the HM mixture for both zeolite types followed a clear sigmoidal trend, which was captured well by the Hill model (R² = 0.99), with loading rates up to 56.14 mg/g. Pb consistently exhibited the highest affinity for zeolites, while Cd, Cr, Ni, and Zn were most affected by NH₄⁺ competition in the column tests. Desorption tests confirmed that NH₄⁺ rapidly re-mobilises adsorbed metals, in particular Cd, Cu, and Zn. Slightly acidic to neutral pH conditions were optimal for minimising HM remobilisation. These findings underscore the need to consider competitive interactions and operational conditions when applying natural zeolites for HM removal, especially in ammonium-rich environments such constructed wetlands, soil filters, or other decentralised applications. Full article

The utilization of organic fertilizers for the cultivation of wild edible and medicinal plants offers agronomic and ecological benefits, given their suitability to low-input and sustainable production systems. Under such conditions, these species may also benefit from targeted foliar applications of micronutrients to enhance their nutritional quality. This study examined the effects of a vinasse-based organic fertilizer and conventional fertilization regime, in combination with foliar applications of iron (Fe) and zinc (Zn), on the biomass, leaf photochemistry, and plant stress-related responses of Sideritis cypria and Origanum dubium. In S. cypria, organic fertilization resulted in a similar yield compared to conventional fertilization, while O. dubium showed a significant decrease in yield when using organic fertilizers. The impact of spraying with Zn on S. cypria dry matter content was related to the availability of nutrients, particularly nitrogen, while in O. dubium Zn spraying induced a decrease in dry matter. The total phenols content and antioxidant activity of S. cypria were elevated by conventional fertilization and foliar application of Fe, while the combination of organic fertilization and foliar application of Fe and Zn reduced lipid peroxidation. In O. dubium, foliar application of Fe and Zn led to a reduction in total phenols content, antioxidant capacity, and hydrogen peroxide content under adequate nutrition. In general, foliar spraying with Zn tended to improve water use efficiency under specific fertilization practices on both species, while the positive effect of conventional fertilization on nutrient use efficiency still requires further validation. Ultimately, the efficiency of organic fertilization was related to the examined species, inducing variations in leaf chlorophyll content. In addition, foliar application of Fe and Zn affected the antioxidant capacity and mineral content of the examined species. Thus, appropriate fertilization management is vital to fully realize the specific benefits of foliar micronutrient addition. Full article

In the field of advanced electrical energy conversion and storage, remarkable attention has been given to the development of new, more sustainable electrolytes. In this regard, the combination of redox shuttles with aqueous bio-polymer gels seems to be a valid alternative via which to overcome the typical drawbacks of common liquid electrolytes such as corrosion, volatility or leakage. Despite the promising results obtained so far, redox-active species such as bis(6,6′-dimethyl-2,2′-bipyridine)copper(I) trifluoromethanesulfonylimide, ([Cu(I)(dmby)₂]TFSI), still present inherent challenges associated with their poor water solubility and oxidative lability, which prevents their employment in cheap and sustainable aqueous electrolytes. The present study investigates the stabilization of the Cu(I) complex ([Cu(I)(dmby)₂]TFSI) within two natural hydrogels based on the biopolymers κ-carrageenan and galactomannan, using ZnO nanoparticles as gelling agents. These eco-friendly and biocompatible systems are proposed as potential matrices for quasi-solid electrolytes (QSEs), offering a promising platform for advanced electrolyte design in electrochemical applications. Both hydrogels effectively stabilized and retained the redox species within their networks. In order to shed light on distinct stabilization mechanisms, complementary FTIR and SEM analyses were relevant to reveal the structural rearrangements, specific to each matrix, upon complex incorporation. Furthermore, thermogravimetric analysis confirmed notable thermal resilience in both systems, with the galactomannan-based gel demonstrating enhanced performance. Altogether, this work introduces a novel strategy for embedding copper-based redox couples into gelled electrolytes, paving the way toward their integration in real electrochemical devices, where long-term stability, redox retention, and energy conversion efficiency are critical evaluation criteria. Full article

The production of biodiesel from microalgae presents a sustainable and renewable solution to the growing global energy demands, with catalysts playing a critical role in optimizing the transesterification process. This study examines the emerging catalysts and innovative techniques utilized in converting microalgal lipids into fatty acid methyl esters, emphasizing their impact on reaction efficiency, yield, and environmental sustainability. Sulfuric acid demonstrates excellent performance in in situ transesterification, while NaOH/zeolite achieves high biodiesel yields using ultrasound- and microwave-assisted methods. Metal oxides such as CuO, NiO, and MgO supported on zeolite, as well as ZnAl-layered double hydroxides (LDHs), further enhance reaction performance through their high activity and stability. Enzymatic catalysts, particularly immobilized lipases, provide a more environmentally friendly option, offering high yields (>90%) and the ability to operate under mild conditions. However, their high cost and limited reusability pose significant challenges. Ionic liquid catalysts, such as tetrabutylphosphonium carboxylate, streamline the process by eliminating the need for drying and lipid extraction, achieving yields as high as 98% from wet biomass. The key novelty of this work lies in its detailed focus on the use of ionic liquids and nanocatalysts in microalgae-based biodiesel production, which are often underrepresented in previous reviews that primarily discuss homogeneous and heterogeneous catalysts. Full article

The treatment of organic waste from dyes or other industry processes is a crucial issue that requires urgent attention. Photocatalysis is a promising method for tackling this problem, with ZnO being a commonly used photocatalyst material. This study compared the degrading efficiency of ZnO particles and ZnO-Ag composites by utilizing flame and spray pyrolysis techniques. Under UV light, methylene blue (MB) was used as a model organic waste. The generated particles were characterized using Brunauer–Emmett–Teller (BET) surface area, scanning electron microscopy (SEM), X-Ray diffraction (XRD), and a UV-Vis spectrometer. The findings showed that the ZnO and ZnO-Ag obtained using both methods exhibited hexagonal Wurtzite crystal structures, and there was no significant difference in the crystal sizes produced. SEM analysis indicated that the morphology of the resulting particles differed significantly, with flame-synthesized particles being remarkably smaller in size (one-thirtieth the size following spray synthesis) and having smoother surfaces. Furthermore, the addition of Ag particles to ZnO enhanced the MB degradation efficiency by two to three times, achieving a maximum of 64% at 75 min. The BET analysis showed that the surface area of ZnO doped with Ag was larger compared to that of pristine ZnO. On the other hand, the ZnO-Ag particles produced via spray pyrolysis exhibited a total pore volume (determined through nitrogen adsorption–desorption analysis) three times larger than that of the particles produced via the flame method. The particles produced via spray pyrolysis also had better MB degradation performance compared to those synthesized using flame pyrolysis. Full article

The toxicity of lead in conventional perovskites and their inherent chemical instability impede the commercialization of perovskite-based optoelectronics. Therefore, it is vital to develop chemically stable and environmentally friendly Pb-free alternatives. Recently, zero-dimensional (0D) all-inorganic Cs₂ZnCl₄ doped with Sn(II) has emerged as a promising candidate, exhibiting superior chemical robustness, minimal biotoxicity, and exceptional optoelectronic properties. In this work, pressure effects on structure and optical properties in Sn(II)-doped all-inorganic zero-dimensional halide perovskite are investigated both experimentally and theoretically. The structure–property relationship of Sn(II)-doped Cs₂ZnCl₄ is studied using high-pressure techniques. Piezochromism, accompanied by a remarkable change in emission color from orange/red and green to orange/yellow, was obtained from 1 atm to 22.5 GPa. Angle dispersive synchrotron X-ray diffraction (ADXRD) patterns and Raman spectra manifest that the material underwent an isostructural phase transition followed by amorphization with increasing pressure. The piezochromism and band gap engineering originate from the pressure-induced lattice compression and isostructural phase transition. This work advances STE emission studies and provides a robust strategy to boost emission efficiency and to construct multifunctional materials with piezochromism in environmentally friendly perovskites, thus facilitating diverse future applications. Full article

This study explores the critical role of airborne nanoparticle shape in air filtration performance, with direct relevance to the field of nanomaterials production. Aerosol particles ranging from 40 to 250 nm—including spherical Fe₂O₃, cubic MgO, straight rod-shaped ZnO, and curved or clustered COOH-functionalized nanotubes—were synthesized and tested to assess shape-dependent filtration behavior. The results indicate that the effect of particle morphology on filtration efficiency becomes markedly pronounced at larger particle sizes. For instance, at 250 nm, filtration efficiency differed by as much as 30% between spherical Fe₂O₃ and rod-shaped ZnO particles. These findings have substantial implications for industries engaged in large-scale nanomaterial synthesis, particularly where anisotropic or rod-like particles are prevalent. The potential for higher-than-anticipated atmospheric release of such particles underscores the need for refined environmental controls and monitoring. Furthermore, the current practice of using primarily spherical particles in air filter certification tests may require reconsideration to ensure accuracy and applicability to real-world scenarios involving non-spherical nanomaterials. Full article

This study evaluated the ability of two plants, Phragmites australis and Typha latifolia, to bioaccumulate zinc from industrial effluents in constructed wetlands using ceramsite as a support medium. Two types of experiments were conducted: one with real industrial effluent containing 9.4 mg/L of Zn and another with synthetic effluent containing Zn at concentrations ranging from 10 to 100 mg/L. Zinc uptake in plant segments, ceramsite, and its concentration in wastewater were determined using ICP-OES. Both plants removed 97–99% of zinc ions from the industrial effluent, with the highest metal uptake occurring in the roots. In the case of synthetic solutions, Typha latifolia demonstrated higher zinc removal efficiency (95–99% removal) compared to Phragmites australis (74–90%). Typha latifolia also accumulated significantly higher levels of Zn, primarily in the roots. Transfer factor values were calculated to assess zinc translocation within plant tissues. No visual signs of toxicity were observed during the experiment. This phytoremediation approach could represent a sustainable and environmentally friendly method for treating industrial effluents. Full article

Famatinite (Cu₃SbS₄) is an earth-abundant, nontoxic material with potential for thermoelectric energy generation applications. Herein, rapid, energy-efficient, and facile one-pot modified polyol synthesis was utilized to produce gram-scale quantities of phase-pure famatinite (Cu_2.7M_0.3SbS₄, M = Cu, Zn, Mn) nanoparticles (diameter 20–30 nm) with controllable and stoichiometric incorporation of transition metal dopants on the Cu-site. To produce pellets for thermoelectric characterization, the densification process by spark plasma sintering was optimized for individual samples based on thermal stability determined using differential scanning calorimetry and thermogravimetric analysis. Electronic transport properties of undoped and doped famatinite nanoparticles were studied from 225–575 K, and the thermoelectric power factor was calculated. This is the first time electronic transport properties of famatinite doped with Zn or Mn have been studied. All famatinite samples had similar resistivities (>0.8 mΩ·m) in the measured temperature range. However, the Mn-doped famatinite nanomaterials exhibited a thermoelectric power factor of 10.3 mW·m⁻¹·K⁻¹ at 575 K, which represented a significant increase relative to the undoped nanomaterials and Zn-doped nanomaterials engendered by an elevated Seebeck coefficient of ~220 µV·K⁻¹ at 575 K. Future investigations into optimizing the thermoelectric properties of Mn-doped famatinite nanomaterials are promising avenues of research for producing low-cost, environmentally friendly, high-performing thermoelectric materials. Full article

Microplastics are an increasing concern due to their widespread occurrence in aquatic environments worldwide. The lack of a harmonised protocol for their reliable quantification remains a major challenge in current scientific efforts. This study presents a comparative evaluation of three protocols for the detection and quantification of microplastics in aqueous samples. The protocols were assessed based on quantification efficiency, risk of particle degradation, staining performance, operational complexity, and cost per sample. Protocol A combined Rhodamine B and ethanol staining with NaCl-based density separation, demonstrating strong isolation performance while maintaining minimal chemical hazards and moderate cost (2.45€ per sample) that could be further reduced to 0.45€ per sample by substituting reagent-grade NaCl with table salt. Protocol B offered moderate isolation capacity and presented the highest risk of particle fragmentation, likely due to the use of acetone and high-temperature digestion. Protocol C, based on the combined use of Nile Red and ZnCl₂, also presented a risk of particle fragmentation, resulting in the highest MP count for small and hydrophobic particles. In addition, its high cost (15.23€ per sample) limits its suitability for routine application. Full article

Under normal conditions, the novel zinc blende beryllium oxide (zb BeO) exhibits in a metastable crystalline phase, which is less stable than its wurtzite counterpart. Ultrathin zb BeO epifilms have recently gained significant interest to create a wide range of advanced high-resolution, high-frequency, flexible, transparent, nano-electronic and nanophotonic modules. BeO-based ultraviolet photodetectors and biosensors are playing important roles in providing safety and efficiency to nuclear reactors for their optimum operations. In thermal management, BeO epifilms have also been used for many high-tech devices including medical equipment. Phonon characteristics of zb BeO at ambient and high-pressure P ≠ 0 GPa are required in the development of electronics that demand enhanced heat dissipation for improving heat sink performance to lower the operating temperature. Here, we have reported methodical simulations to comprehend P-dependent structural, phonon and thermodynamical properties by using a realistic rigid-ion model (RIM). Unlike zb ZnO, the study of the Grüneisen parameter γ(T) and thermal expansion coefficient α(T) in zb BeO has revealed atypical behavior. Possible reasons for such peculiar trends are attributed to the combined effect of the short bond length and strong localization of electron charge close to the small core size Be atom in BeO. Results of RIM calculations are compared/contrasted against the limited experimental and first-principle data. Full article

Forests are considered one of the most valuable natural areas in metropolitan region landscapes. Considering the sensitivity and ecosystem services provided by trees, the definition of urban forest ecosystems is nowadays based on a comprehensive understanding of the entire urban ecosystem. The effective capturing of particulate matter is one of the ecosystem services provided by urban forests. These ecosystems function as efficient biological filters. Plants accumulate pollutants passively via their leaves. Therefore, another ecosystem service provided by city forests could be the use of tree organs as bioindicators of pollution. This paper aims to estimate differences in trace metal pollution between the wooded urban areas of Vienna and Krakow using leaves of evergreen and deciduous trees as biomonitors. An additional objective of the research was to assess the ability of the applied tree species to act as biomonitors. Plant samples of five species—Norway spruce, Scots pine, European larch, common white birch, and common beech—were collected within both areas, in seven locations: four in the “Wienerwald” Vienna forest (Austria) and three in the “Las Wolski” forest in Krakow (Poland). Concentrations of Cr, Cu, Cd, Pb, and Zn in plant material were determined. Biomonitoring studies with deciduous and coniferous tree leaves showed statistically higher heavy metal contamination in the “Las Wolski” forest compared to the “Wienerwald” forest. Based on the conducted analyses and the literature study, it can be concluded that among the analyzed tree species, only two: European beech and common white birch can be considered potential indicators in environmental studies. These species appear to be suitable bioindicators, as both are widespread in urban woodlands of Central Europe and have shown the highest accumulation levels of trace metals. Full article

A novel acid-free oxygen pressure leaching for the extraction of zinc from hemimorphite was proposed in this study. Green vitriol (FeSO₄·7H₂O), as one of the important industrial by-products, was used as the leaching reagent to separate zinc from silicon and iron. The effect of leaching conditions, including Fe/Zn molar ratio, leaching temperature, pressure, and reaction time, on the leaching efficiency of zinc, Fe, and Si was investigated systematically. The results showed that the molar ratio of Fe/Zn and leaching temperature play a pivotal role in determining the leaching efficiency rate of Zn. Under the optimized leaching conditions (Fe/Zn molar ratio = 6:1, 150 °C, 1.8 × 10⁶ Pa, and leaching time of 2 h), the leaching efficiency of Zn reached 98.80% and the leaching efficiencies of Fe and Si were 0.76% and 16.80%, respectively. In addition, the shrinking core model was established to represent the relationship between the rate control step and the leaching conditions. The leaching process was controlled by chemical reaction and diffusion, and the activation energy of the leaching process is 97.14 kJ/mol. Full article

This article presents the potential use of a humic agent called ‘Superhumate’, obtained from weathered coal from the Shubarkol deposit in Kazakhstan. The experiment was conducted using model solutions and surface mine water samples from the “Degelen” site at the Semipalatinsk Test Site. The adsorption of heavy metals and toxic elements using the “Superhumate” agent was carried out under dynamic conditions using a chromatographic column. Tests were conducted at a natural pH range of 5–8 (mine waters) and with a model solution at pH 1.7. Assessing the sorption efficiency of this preparation revealed that at pH 1.7, the agent does not adsorb elements such as Cd, Cu, Pb, and Zn. Under dynamic experimental conditions, using the preparation for mine waters at natural pH levels (pH 5–8), elements such as Be, Sr, Mo, Cd, Cs, Zn, and U were efficiently adsorbed at levels of 60–95%. The sorption efficiency of Pb ions was found to be almost independent of pH. The experimental results obtained with mine water samples indicate that alkaline solutions have the highest sorption efficiency, with pH ≥ 7, which is attributed to the solubility of the agent. Full article

This work analyzes the performance of a photoreactor built with UV-LED technology. For this task, a UV-LED wavelength of 365 nm was used as an irradiation source, and it was electrically and spectrally characterized to ensure correct operation. To evaluate the functionality, the photoreactor was tested on the degradation of Rhodamine B (Rh B), a dye commonly used in the textile industry. The experiment was conducted under optimal conditions, using a concentration of 17 ppm of Rh B and 100 mg of zinc oxide (ZnO) as a photocatalyst in a glass reactor. The mixture was continuously stirred for 120 min, achieving 99.42% efficiency. The results showed that the UV-LED photoreactor performs well in activating ZnO for the removal of Rh B from the solution, highlighting its potential for treating textile industry wastewater. The use of LEDs offers advantages such as energy efficiency and lower environmental impact compared to traditional UV lamps. ZnO, known for its reactivity under UV light, acted as a stable photocatalyst, ensuring complete degradation of the dye without producing harmful by-products. This method provides an efficient approach to dye removal in wastewater treatment, promoting cleaner and more sustainable industrial practices. Full article