Search Results (111)

This review explores the catalytic conversion of carbon dioxide (CO₂) into glycerol carbonate (GC), positioning this pathway as a sustainable strategy that couples environmental mitigation with the valorization of surplus glycerol from biodiesel production. Glycerol carbonate maintains extensive industrial utility as a green solvent, chemical intermediate, and functional component in polymers, cosmetics, and packaging. Distinct from prior literature, this study specifically evaluates the use of amorphous silica from rice husk ash (RHA) as a sustainable, low-cost support, analyzing the synergistic effect between Nb₂O₅, NiO, and ionic liquids in hybrid catalyst architectures. The review evaluates diverse catalytic frameworks, with a primary focus on heterogeneous systems. Silica-based materials are highlighted, particularly those synthesized from rice husk ash, which is an abundant amorphous silica source. The sol–gel method is identified as a robust route for engineering porous matrices with high surface areas and tunable structural properties. Furthermore, the doping of silica with metal oxides, such as niobium oxide (Nb₂O₅) and nickel oxide (NiO), is discussed as a strategic approach to introduce synergistic acid–base sites and redox properties that facilitate CO₂ activation. The integration of ionic liquids into hybrid systems is also examined as a promising frontier to enhance reaction kinetics and selectivity. Finally, this review delineates the nexus between agro-industrial waste management and the reduction in greenhouse gas emissions, proposing a circular economy framework for the biodiesel value chain. Full article

The commercialization of V-based catalysts for the selective catalytic reduction of NOx by NH₃ (NH₃-SCR) is hindered by their narrow operating temperature window, insufficient low-temperature (LT) activity, and severe SO₂-to-SO₃ oxidation. To bridge this gap, we herein introduced Nb and hexagonal BN into a VW/TiO₂ system to simultaneously enhance its LT SCR activity, suppress undesired side reactions, and improve durability. Nb incorporation promoted V⁵⁺/V⁴⁺ redox cycling and enhanced lattice oxygen mobility, thus reducing the apparent activation energy and suppressing SO₂ oxidation at elevated temperatures. However, excessive Nb loading induced NH₃ oxidation and N₂O formation. This drawback was mitigated by introducing BN as a dispersion promoter, which helped secure high catalytic performance at a reduced Nb content. The VWNb/Ti-BN catalyst achieved superior NOx conversion and N₂ selectivity over a wide temperature range and benefited from notably suppressed NH₃ oxidation and SO₂-to-SO₃ oxidation. Kinetic analysis revealed that Nb primarily lowered the reaction energy barrier via redox property enhancement, whereas BN accelerated surface reaction turnover by stabilizing and dispersing active acidic sites, markedly increasing the turnover frequency without reducing the activation energy. In situ spectroscopic analysis confirmed the accelerated consumption of adsorbed NH₃ species and enhanced formation of reactive NOx intermediates, indicating SCR pathway enhancement. After aging in the presence of SO₂ and H₂O, the best-performing honeycomb-type monolithic catalyst retained and NOx conversion of >80%, demonstrating excellent long-term durability under practical conditions. A composition-aware machine learning model based on log-ratio-transformed variables quantitatively identified the synergistic balance among V, Nb, W, BN, and TiO₂ as the dominant factor governing LT SCR performance. Thus, this work provides valuable mechanistic insights and a strategy for designing wide-temperature-window SCR catalysts with improved activity, selectivity, and resistance to sulfur poisoning. Full article

Microbial fuel cells are a new alternative for sustainable energy generation and wastewater treatment technology. To scale up this technology, cost-effective electrodes are required. The electrochemical reduction of oxygen at the cathode is a key reaction for power generation. Noble metals, especially Pt, are extensively used as cathode catalysts in MFC; however, its application is limited to its high cost and catalyst poisoning. Ferroelectric materials are reported as a good candidate due to their spontaneous polarization. The main objective of this study is to prepare and characterize the cost-effective ferroelectric materials LiTa_0.6 Nb_0.4 O₃ and Li_0.95 Ta_0.57 Nb_0.38 Mg_0.15 O₃ in order to test their catalytic activity in air-cathode MFC. Powders were prepared following the solid-state synthesis and characterized using Scanning Electron Microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction. To evaluate the electrochemical performance of the catalysts, electrochemical studies such as EIS, CV, LSV, and CA were conducted. In MFC, the performance of our material has been investigated using COD determination and polarization measurement. The obtained results demonstrate the potential of Li_0.95 Ta_0.57 Nb_0.38 Mg_0.15 O₃ as a low-cost and effective catalyst material in MFCs, showing a high COD removal up to 75%, and power-density output of 764 mW/m². Full article

In this study, we report the preparation of platinum nanoparticles (Pt NPs) deposited on HTiNbO₅ and the application of the resultant material in the catalytic decomposition of sodium borohydride (NaBH₄) to generate hydrogen. The starting material, KTiNbO₅, was prepared through a solid-state process involving Nb₂O₅, K₂CO₃, and TiO₂. The subsequent treatment with HNO₃ resulted in the exchange of potassium by protons, rendering HTiNbO₅. This material served as support for Pt nanoparticles (3.6 ± 0.7 nm), producing Pt NPs/HTiNbO₅. All compounds were characterized using TGA, FTIR, XRD, Raman, SEM-EDS, and HRTEM. The influence of different factors on the reaction kinetics was evaluated, resulting in a hydrogen generation rate (HGR) of 22,790.18 $\mathrm{m}\mathrm{L} {\mathrm{m}\mathrm{i}\mathrm{n}}^{-1}{\mathrm{g}}_{\mathrm{c}\mathrm{a}\mathrm{t}}^{-1}$ at 50 °C. The activation energy (41.83 kJ mol⁻¹) was also determined. A mechanistic study with deuterated water revealed a kinetic isotopic effect (KIE) value of 1.27, indicating the dissociation of B-H from BH₄⁻ as the rate-determining step of the process. Furthermore, the reuse and durability of the material were evaluated, revealing a catalyst performance close to 100% over the 10 tested cycles. Therefore, it can be concluded that the synthesized material, Pt-nanoparticles dispersed on HTiNbO₅, exhibits excellent performance and is suitable for hydrogen evolution from NaBH₄. Full article

Furfural and 5-hydroxymethylfurfural are considered as essential platform molecules for the chemical industry, acting as precursors and intermediates of numerous products. They are produced from pentoses and hexoses, respectively, in an acid medium. In this work, biomass from a green macroalgae, Ulva rigida, was treated under acidic conditions provided by heterogeneous catalysts in order to promote the dehydration of its monosaccharides into furfural and 5-hydroxymethylfurfural. Particularly, two functionalized mesoporous silicas, HMS and SBA-supported metal oxides (Nb₂O₅ and ZrO₂), were used as catalysts. Their textural, structural, and acid properties were deeply studied, providing excellent BET surface areas (ranging 424 to 1204 m²/g) and a high concentration of acid sites (220–460 µmol/g), which then translated into great catalytic performances (77.8% and 64.1% of furfural and HMF molar yields, respectively, using HMS-Nb) after a 4 h of reaction time at 180 and 160 °C, respectively. The catalyst showed excellent stability and recyclability as it could be reused for up to five reaction runs with only a slight decrease in performance. Full article

High-temperature proton exchange membrane fuel cells (HT-PEMFCs) offer distinct advantages over their low-temperature counterparts. However, their commercial viability is significantly hampered by durability challenges stemming from electrocatalyst support degradation in the corrosive phosphoric acid environment. This review provides a comprehensive analysis of advanced strategies to overcome this critical durability issue. Two main research directions are explored. The first involves engineering more robust carbon-based materials, including graphitized carbons, carbon nanostructures (nanotubes and graphene), and heteroatom-doped carbons, which enhance stability by modifying the carbon’s intrinsic structure and surface chemistry. The second direction focuses on replacing carbon entirely with intrinsically stable non-carbonaceous materials. These include metal oxides (e.g., TiO₂, SnO₂), transition metal carbides (e.g., WC, TiC), and nitrides (e.g., Nb₄N₅). For these non-carbon materials, a key focus is on overcoming their typically low electronic conductivity through strategies such as doping and the formation of multi-component composites. The analysis benchmarks the performance and durability of these advanced supports, concluding that rationally designed composite materials, which combine the strengths of different material classes, represent the most promising path toward developing next-generation, long-lasting catalysts for HT-PEMFCs. Full article

The aim of the present paper is to study the antimicrobial effects of Nb₂O₅-containing nanosized powders. A combination of inorganic [telluric acid (H₆TeO₆)] and organic [Ti(IV) n-butoxide, Nb(V) ethoxide (C₁₀H₂₅NbO₅)] precursors was used to prepare gels. To allow for further hydrolysis, the gels were aged in air for a few days. The gels were amorphous, but at 600 °C the amorphous phase was absent, and only TiO₂ (anatase) crystals were detected. The average crystallite size of TiO₂ (anatase) was about 10 nm. The UV-Vis spectrum of the as-prepared gel showed red shifting in the cut-off region. The obtained nanopowders were evaluated for antimicrobial properties against E. coli ATCC 25922, P. aeruginosa ATCC 27853, S. aureus ATCC 25923, and C. albicans 18804. Among these, only E. coli was examined in combination with the antibiotic ciprofloxacin to assess whether there was a potential synergistic effect. The results showed that the material exhibited antibacterial activity against the abovementioned bacterial strains but not against C. albicans. In the case of E. coli combined with ciprofloxacin, a concentration-dependent enhancement in antibacterial activity was observed. The obtained samples can be considered as prospective materials for use as environmental catalysts. The newly synthesized nanocomposite showed a balancing, modulating, and neutralizing effect on the generation of ROS. The inhibitory effect was preserved in all tested model chemical systems at pH 7.4 (physiological), indicating potential biological applications in inflammatory and oxidation processes in vivo. Full article

Water contamination by emerging pollutants poses a significant environmental challenge, demanding innovative treatment technologies beyond conventional methods. Advanced oxidation processes (AOPs) utilizing niobium-based catalysts, particularly niobium oxide (Nb₂O₅) and its modified forms, are prominent due to their high chemical stability, effective reactive oxygen species (ROS) generation, and versatility. This review systematically examines recent advancements in Nb₂O₅-based catalysts across various AOPs, including heterogeneous photocatalysis, electrocatalysis, and Fenton-like reactions, highlighting their mechanisms, material modifications, and performance. Following PRISMA and InOrdinatio guidelines, 381 papers were selected for this synthesis. The main findings indicate that niobium incorporation enhances pollutant degradation by extending light absorption, reducing electron–hole recombination, and increasing ROS generation. Structural modifications such as crystalline phase tuning, defect engineering, and the formation of heterostructures further amplify catalytic efficiency and stability. These catalysts demonstrate considerable potential for water treatment, effectively degrading a broad range of persistent contaminants such as dyes, pharmaceuticals, pesticides, and personal care products. This review underscores the environmental benefits and practical relevance of Nb₂O₅-based systems, identifying critical areas for future research to advance sustainable water remediation technologies. Full article

The transition to a sustainable chemical industry necessitates efficient valorization of biomass, with polyols serving as versatile, renewable feedstocks. This comprehensive review, focusing on advancements within the last five years, critically analyzes the selective hydrogenolysis of key biomass-derived polyols—including glycerol, erythritol, xylitol, and sorbitol—into valuable diols. Emphasis is placed on the intricate catalytic strategies developed to control C–O bond cleavage, preventing undesired C–C scission and cyclization. The review highlights the design of bifunctional catalysts, often integrating noble metals (e.g., Pt, Ru, Ir) with oxophilic promoters (e.g., Re, W, Sn) on tailored supports (e.g., TiO₂, Nb₂O₅, N-doped carbon), which have led to significant improvements in selectivity towards specific diols such as 1,2-propanediol (1,2-PD), 1,3-propanediol (1,3-PD), and ethylene glycol (EG). While substantial progress in mechanistic understanding and catalyst performance has been achieved, challenges persist regarding catalyst stability under harsh hydrothermal conditions, the economic viability of noble metal systems, and the processing of complex polyol mixtures from lignocellulosic hydrolysates. Future directions for this field underscore the imperative for more robust, cost-effective catalysts, advanced computational tools, and intensified process designs to facilitate industrial-scale production of bio-based diols. Full article

Catalytic upgrading of pyrolysis oils is an important step for producing replacement hydrocarbon-rich liquid biofuels from biomass and can help to advance pyrolysis technology. Catalysts play a pivotal role in influencing the selectivity of chemical reactions leading to the formation of main compounds in the final upgraded liquid products. The present work involved a systematic study of solvent-free catalytic reactions of cyclohexanone in the presence of hydrogen gas at 160 °C for 3 h in a batch reactor. Cyclohexanone can be produced from biomass through the selective hydrogenation of lignin-derived phenolics. Three types of catalysts comprising undoped NbOPO₄, 10 wt% NiO/NbOPO₄, and 30 wt% NiO/NbOPO₄ were studied. Undoped NbOPO₄ promoted both aldol condensation and the dehydration of cyclohexanol, producing fused ring aromatic hydrocarbons and hard char. With 30 wt% NiO/NbOPO₄, extensive competitive hydrogenation of cyclohexanone to cyclohexanol was observed, along with the formation of C₆ cyclic hydrocarbons. When compared to NbOPO₄ and 30 wt% NiO/NbOPO₄, the use of 10 wt% NiO/NbOPO₄ produced superior selectivity towards bi-cycloalkanones (i.e., C₁₂) at cyclohexanone conversion of 66.8 ± 1.82%. Overall, the 10 wt% NiO/NbOPO₄ catalyst exhibited the best performance towards the production of precursor compounds that can be further hydrodeoxygenated into energy-dense aviation fuel hydrocarbons. Hence, the presence and loading of NiO was able to tune the activity and selectivity of NbOPO₄, thereby influencing the final products obtained from the same cyclohexanone feedstock. This study underscores the potential of lignin-derived pyrolysis oils as important renewable feedstocks for producing replacement hydrocarbon solvents or feedstocks and high-density sustainable liquid hydrocarbon fuels via sequential and selective catalytic upgrading. Full article

The transition to clean and renewable energy sources is critically dependent on efficient hydrogen production technologies. This review surveys recent advances in photocatalytic water splitting, focusing on MNb₂O₆ nanomaterials, which have emerged as promising photocatalysts due to their tunable band structures, chemical robustness, and tailored morphologies. The objectives of this work are to (i) encompass the current synthesis strategies for MNb₂O₆ compounds; (ii) assess their structural, electronic, and optical properties in relation to photocatalytic performance; and (iii) elucidate the mechanisms underpinning enhanced hydrogen evolution. Main data collection methods include a literature review of experimental studies reporting bandgap measurements, structural analyses, and hydrogen production metrics for various MNb₂O₆ compositions—especially those incorporating transition metals such as Mn, Cu, Ni, and Co. Novelty stems from systematically detailing the relationships between synthesis routes (hydrothermal, solvothermal, electrospinning, etc.), crystallographic features, conductivity type, and bandgap tuning in these materials, as well as by benchmarking their performance against more conventional photocatalyst systems. Key findings indicate that MnNb₂O₆, CuNb₂O₆, and certain engineered heterostructures (e.g., with g-C₃N₄ or TiO₂) display significant visible-light-driven hydrogen evolution, achieving hydrogen production rates up to 146 mmol h⁻¹ g⁻¹ in composite systems. The review spotlights trends in heterojunction design, defect engineering, co-catalyst integration, and the extension of light absorption into the visible range, all contributing to improved charge separation and catalytic longevity. However, significant challenges remain in realizing the full potential of the broader MNb₂O₆ family, particularly regarding efficiency, scalability, and long-term stability. The insights synthesized here serve as a guide for future experimental investigations and materials design, advancing the deployment of MNb₂O₆-based photocatalysts for large-scale, sustainable hydrogen production. Full article

Ag/AgCl-decorated layered lanthanum oxide (La₂O₃) and niobium pentoxide (Nb₂O₅) plasmonic photocatalysts are fabricated through an ionic liquid-mediated co-precipitation method. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), powder X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), diffuse reflectance spectroscopy (DRS), and photoluminescence (PL) techniques were used to illustrate the physicochemical properties of the materials. The photoactivity was evaluated for the degradation of Acid Blue 92 (AB92) azo dye, a typical organic contaminant from the textile industry, and U251 cancer cell inactivation. According to the results, Nb₂O₅–Ag/AgCl was able to remove >99% of AB92 solution in 35 min with the rate constant of 0.12 min⁻¹, 2.4 times higher than that of La₂O₃–Ag/AgCl. A pH of 3 and a catalyst dosage of 0.02 g were determined as the optimized factors to reach the highest degradation efficiency under solar energy at noon, which was opted to have the highest sunlight intensity over the reactor. Also, 0.02 mg/mL of Nb₂O₅–Ag/AgCl was determined to be of great potential to reduce cancer cell viability by more than 50%, revealed by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and mitochondrial membrane potential (MMP) examinations. The mechanism of degradation was also discussed, considering the key role of Ag⁰ nanoparticles in inducing a plasmonic effect and improving the charge separation. This work provides helpful insights to opt for an efficient rare metal oxide with good biocompatibility as support for the plasmonic photocatalysts with the goal of environmental purification under sunlight. Full article

This study explored how pore size engineering in Nb-Mn/MCM-41 catalysts affects plasma-catalytic toluene oxidation. Adjusting the pore diameter (2.49–3.98 nm) modulated metal-support interactions and oxygen dynamics, with pore expansion to 3.73 nm (M3) optimizing the Mn⁴⁺/(Mn²⁺ + Mn³⁺) ratio (XPS: 36.8%), the amount of lattice oxygen species (O₂-TPD: 0.222 mmol/g), and crystallite size control (1.5 ± 0.2 nm, TEM). Smaller pores (M1: 2.49 nm) enhanced toluene adsorption but limited active site accessibility, while oversized pores (M4: 3.98 nm) reduced oxygen storage capacity (0.600→0.412 mmol/g). The Nb-Mn/M3 catalyst achieved superior performance with 96.8% toluene conversion, 55.0% CO₂ selectivity, and 85.4% carbon balance, while minimizing organic byproducts (GC-MS). Mechanistic studies revealed pore-mediated oxygen storage-transport cycles as critical for decoupling adsorption and oxidation steps. This study reveals fundamental mechanisms linking pore architecture to plasma-catalytic synergy in toluene oxidation, offering critical insights for the systematic design of energy-efficient, plasma-catalytic systems targeting industrial VOCs remediation. Full article

Supported Pd-based catalysts have been widely applied in the hydrogenation of specific functional groups. Recent trends have focused on employing Pd-based heterogeneous catalysts supported on inorganic nanotubes, wherein inner surface functionalization modulates both palladium nanoparticle (Pd-NP) dispersion and the interaction between reactants and the catalyst surface, thereby influencing catalytic properties. This study aims to develop a catalytic system using amine-lumened halloysite nanotubes immobilizing Pd-NPs (Pd/HNTA) as catalysts for hydrogenation reactions. The formation of Pd-NPs within the organo-functionalized lumen—modified by 3-aminopropyltrimethoxysilane—is confirmed by transmission electron microscopy (TEM) imaging, which reveals a particle size of 2.2 ± 0.4 nm. For comparison, Pd-NPs supported on pristine halloysite (Pd/HNTP) were used as control catalysts, displaying a metal particle size of 2.8 ± 0.8 nm and thereby demonstrating the effect of organic functionalization on the halloysite nanotubes. Both catalysts were employed in the hydrogenation of furfural (FUR) and nitrobenzene (NB) as model reactions. Pd/HNTA demonstrated superior catalytic performance for both substrates, with TOF values of 880 h⁻¹ for FUR and 946 h⁻¹ for NB, and selectivities exceeding 98% for tetrahydrofurfuryl alcohol (THFOH) and aniline (AN), respectively. However, recyclability studies displayed that Pd/HNTA was deactivated at the 10 catalytic cycles during the hydrogenation of FUR, whereas, in the hydrogenation of NB, 5 catalytic cycles were achieved with maximum conversion and selectivity at 360 min. These results revealed that the liquid-phase environment plays a pivotal role in catalyst stability. In the hydrogenation of NB, the coproduction of H₂O adversely affects the interaction between the Pd particles and the inner amine-modified surface, increasing the deactivation of the catalyst with reuse. Thus, the Pd/HNTA catalyst holds significant promise for the development of noble-metal-based catalysts and their application in the transformation of other reducible organic functional groups via hydrogenation reaction. Full article

This study develops iridium (Ir)-based catalysts for the hydrogenation of dodecanoic acid, a medium-chain fatty acid abundant in palm kernel and coconut oils, for producing fatty alcohols and alkanes. Among various supports such as AlOOH, SiO₂, TiO₂, Nb₂O₅, MoO₃, Ta₂O₅, ZrO₂, and WO₃ for 7.5 wt% Ir loading, an Ir-impregnated Nb₂O₅ (Ir/Nb₂O₅) catalyst demonstrated remarkable performance with 100% conversion and a high dodecanol yield (89.1%) under mild conditions (170 °C, 4.0 MPa H₂), while at higher temperatures and pressures (200 °C, 8.0 MPa H₂), Ir-impregnated MoO₃ (Ir/MoO₃) produced dodecane as the main product with a yield of 90.7%. These findings can tailor product selectivity toward desired bio-based chemicals and fuels, offering sustainable pathways for fatty acid hydrogenation by optimizing catalyst supports and reaction conditions in the Ir-based catalyst. Full article