Search Results (62)

Pseudomonas aeruginosa is a major causative agent of nosocomial infections worldwide. Carbapenems are the first-line agents for combating severe P. aeruginosa infections. However, the increasing prevalence of carbapenem-resistant P. aeruginosa (CRPA) has developed as a critical threat to global healthcare systems. In this study, we demonstrated that a mutation in the core nitrogen metabolism regulatory gene glnK decreases carbapenem resistance in P. aeruginosa. OprD, the major porin for carbapenem uptake, is upregulated in the glnK mutant, resulting in decreased resistance. We further found that the NtrB/NtrC two-component regulatory system is upregulated in the glnK mutant. An electrophoretic mobility shift assay (EMSA) and genetic studies revealed a direct regulatory role of NtrC on the expression of oprD. Deletion of ntrB, ntrC, or oprD in the glnK mutant restored the bacterial resistance to carbapenems. These results reveal that a GlnK-NtrB/NtrC-OprD regulatory pathway affects carbapenem resistance, shedding light on the regulatory relationship between nitrogen metabolism and carbapenem resistance in P. aeruginosa. Full article

Background/Objectives: Empagliflozin (EMPA) was repurposed for Alzheimer’s disease (AD) treatment via buccal delivery, exploiting novel nanofibers (NFs) integrating chitosan (Cs), silk fibroin (Fb), and poly(lactic acid) (PLA). Methods: EMPA-loaded Cs/Fb/PLA NFs were electrospun in different formulations to optimize the formulation parameters. The optimized formulation was then investigated for its enhanced in vivo effect. Results: Optimized nanofiber diameters ranged from 459 ± 173 to 668 ± 148 nm, possessing bead-free morphology confirmed by SEM and satisfactory mechanical properties. EMPA was successfully well-dispersed in the polymer matrix as evidenced by FTIR, XRD, and drug content. The optimized NFs displayed a hydrophilic surface (contact angle < 90°), and biphasic drug release with sustained EMPA liberation (84.98% over 24 h). In vivo, buccal EMPA-Cs/Fb/PLA NFs in an AlCl₃-induced AD rat model significantly reduced brain-amyloid-β, phosphorylated tau, IL-1β, and AGER expression by 2.88-, 2.64-, 2.87-, and 2.50-fold, respectively, compared to positive controls, and improved locomotor activity (1.86-fold) and cognitive performance (T-maze) (4.17-fold). Compared to pure EMPA, the nanofiber formulation achieved further reductions in amyloid-β (1.78-fold), p-tau (1.42-fold), IL-1β (1.89-fold), and AGER (1.38-fold), with efficacy comparable to memantine. Histopathological examination revealed preservation of the hippocampal neuronal structure. Conclusions: The findings suggest EMPA-loaded Cs/Fb/PLA NFs as a promising non-invasive, sustained-release buccal delivery platform for AD therapy, offering multimodal neuroprotection through modulation of the Aβ–AGER–p-tau axis. Full article

This paper deals with unwanted spatial distortion in virtual environments and its impact on the construction of metaverse environments that require high precision, especially in fields with specific requirements, such as medicine. At the same time, it presents the main technical factors leading to this phenomenon. The paper also emphasizes that data reliability is the first factor that needs to be analyzed and evaluated. Through a comprehensive analysis of the limitations of traditional methods and the development trend of techniques based on Artificial Intelligence (AI), a data processing method based on the Gaussian process regression method is proposed. Through experiments and result analysis, this method significantly improves data reliability, thereby enhancing the accuracy of avatar motion simulation in the virtual environment of the metaverse. Future research trends include further improvement of processing accuracy and speed; deploying on real devices; expanding the research into other factors contributing to unintended spatial distortions; exploring and applying appropriate processing techniques and technologies to enhance simulation reliability in virtual metaverse environments. Full article

This work presents a facile mechano-thermal route for the synthesis of carbon-decorated, hollow, mesoporous α-Fe₂O₃ microspheres. Comprehensive characterization (XRD, XPS, FT-IR, SEM/EDX, TGA, zeta-potential) confirmed the formation of phase-pure hematite with nanoscale crystallites (~19 nm), substantial residual surface carbon (~40 wt%) consistent with Fe–O–C linkages, and a positive surface charge (+15.9 mV). The hierarchical hollow/mesoporous architecture enables fast ion transport and provides extensive interior binding sites, resulting in rapid Pb(II) uptake that reaches 92% removal in ≈15 min at pH 5.0. The adsorption follows a Langmuir isotherm (q_max ≈ 70.6 mg/g) and pseudo-second-order kinetics, indicative of chemisorption coupled to efficient mass transfer into internal sites. The composite also exhibits antibacterial activity against Escherichia coli and Staphylococcus aureus, demonstrating its potential for simultaneous mitigation of heavy metal contaminants and pathogens. Full article

Pyruvate:ferredoxin oxidoreductase (PFOR) is a key Achilles’ heel in anaerobic pathogens. We integrate electronic-structure calculations (DFT), cheminformatic QSAR metrics, and residue-resolved docking to distill a concise “recognition code” and translate it into practical design rules. Using nitazoxanide (Nita; ΔG_(bind) ≈ −10.0 kcal·mol⁻¹) as a well-established reference, productive binding requires a conserved triad: a hydrogen-bond donor addressing Thr-997 and Cys-840, a π–π stack with Phe-869, and a recurrent π–σ contact to Thr-997 that orients the scaffold. Deacetylation to tizoxanide unmasks the phenolic donor and raises local electrophilicity, yet it also slightly loosens pocket packing (−9.6 kcal·mol⁻¹). Strategic halogenation introduces a σ-hole interaction near Pro-29, tightening pose geometry without disrupting the donor network; the lead analogue yields −10.1 kcal·mol⁻¹, and two others match the reference by preserving the triad and hydrophobic belt. The result is a minimal, testable recipe—retain the phenolic donor, enforce Thr-997/Cys-840 and Phe-869, and add a calibrated halogen σ-hole—offering falsifiable predictions to surpass nitazoxanide and guiding synthesis and biophysical validation in targeted PFOR inhibition. Full article

In this study, cerium-based metal–organic frameworks (MOFs), cerium terephthalate (CeTPA), were synthesized and incorporated into nanofibers via electrospinning using poly(methyl methacrylate) (PMMA). The synthesized materials were characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), diffuse reflectance spectroscopy (DRS), and Tauc plot analysis. The electrospun CeTPA nanofibers exhibited superhydrophobic properties, with water contact angles exceeding 150°. The adsorption and catalytic performance of the nanofibers were assessed for dye removal using Congo red (CR) and methylene blue (MB) as model organic pollutants. Adsorption studies demonstrated negligible dye uptake due to the hydrophobicity of the fibers, while catalytic degradation experiments in the presence of hydrogen peroxide (H₂O₂) showed significant degradation of CR but limited effectiveness against MB, offering high selectivity toward anionic dyes. Structural and optical characterizations confirmed the stability and catalytic activity of CeTPA nanofibers, highlighting their potential for selective dye degradation in wastewater treatment applications. Full article

Background/Objectives: Chemotherapy-induced alopecia is a common and distressing side effect of cancer treatment, significantly impacting patients’ psychological well-being. Nanocarriers offer a promising strategy for targeted drug delivery to hair follicles, while chitosan nanoparticles have demonstrated hair-growth-promoting properties. This study explores the potential of chitosan nanoparticles as a topical delivery system for five pharmacological agents—phenobarbital, pioglitazone, rifampicin, N-acetylcysteine, and tacrolimus—to prevent chemotherapy-induced alopecia. Methods: Drug-loaded chitosan nanoparticles were prepared using the ionic gelation technique and characterized by particle size, zeta potential, entrapment efficiency, FT-IR spectroscopy, and TEM imaging. Their efficacy was assessed in a cyclophosphamide-induced alopecia model in C57BL/6 mice through macroscopic observation, histopathological examination, and scanning electron microscopy of regrown hair. Results: The prepared particles were spherical, cationic, and between 205 and 536 nm in size. The entrapment efficiencies ranged from 8% to 63%. All five drugs mitigated follicular dystrophy, shifting the hair follicle response from dystrophic catagen to dystrophic anagen. Phenobarbital demonstrated the most significant hair regrowth and quality improvements, followed by N-acetyl cysteine and pioglitazone. Tacrolimus showed moderate efficacy, while rifampicin was the least effective. Conclusions: These findings suggest that phenobarbital-loaded chitosan nanoparticles represent a promising approach for the prevention and treatment of chemotherapy-induced alopecia, warranting further investigation for clinical applications. Full article

Decarbonizing industrial manufacturing is a significant challenge in the effort to limit the impacts of global climate change. Additive manufacturing (AM) is one pathway for reducing the impacts of manufacturing as it creates parts layer-by-layer rather than by removing (i.e., subtracting) material from solid stock as with conventional techniques. This reduces material inputs and generates less waste, which can substantially lower life cycle energy consumption and greenhouse gas emissions. However, AM adoption in the manufacturing sector has been slow, partly due to challenges in making a strong business case compared with more traditional and widely available techniques. This paper highlights the need for the development of simple screening analysis tools to speed the adoption of AM in the manufacturing sector by providing decision-makers easy access to important production life cycle emissions, and cost information. Details on the development of two Microsoft Excel software tools are provided: upgrades to an existing tool on the energy and carbon impacts of AM and a new tool for analyzing the major cost components of AM. A case study applies these two tools to the production of a lightweight aerospace bracket, showing how the tools can be used to estimate the environmental benefits and production costs of AM. Full article

With the development of the aquatic products processing industry, 6–8 million tons of shrimp and crab shell waste are produced globally annually, but, due to the lack of high-value conversion technology, crab shells are often discarded in large quantities as a by-product of processing. Pseudomonas-based microbial cell factories are capable of biosynthesis of high-value products using a wide range of substrates; however, there is currently no reliable fermentation model for producing high-value chemicals using crab shell waste by Pseudomonas strains. In this study, we first explored the culture conditions of shell fermentation using KT2440 through single-factor and orthogonal experiments, and the optimized fermentation parameters obtained are given as follows: a temperature of 30 °C, fermentation time of 42 h, substrate solid–liquid ratio of 7%, and rotational speed of 200 rpm. After optimization, the maximum cell growth was increased by 64.39% from 350.67 × 10⁸ CFU/mL to 576.44 × 10⁸ CFU/mL. Combined with engineering modification, two engineered strains, KT_+IV and KT_+lasBT, expressing exogenous proteases, were obtained, and the maximum growth was increased from 316.44 × 10⁸ CFU/mL to 1268.44 × 10⁸ CFU/mL and 616.89 × 10⁸ CFU/mL, which were 300.84% and 94.94% higher, respectively. In addition, the engineered strain KT_+NtrcT-D55E, which regulates nitrogen metabolism, was obtained, and the accumulation of intracellular polyhydroxy fatty acid esters (PHA) was increased from 20.00 mg/L to 78.58 mg/L, which was a significant increase of 292.93% relative to the control group. This study provides a theoretical basis and technical support for the high-value utilization of shrimp and crab shell resources and the development of environmentally friendly bioproducts. Full article

Ethyl 3-formyl-1H-indol-2-carboxylate (FIC) and 2-(4-methoxyphenyl)-2,4-dihydropyrrolo [3,4-b]indol-3-ol (MPI) were synthesized as indole derivatives. The chemical structures of FIC and MPI were established through analytical and spectroscopic techniques. The inhibitory impacts of FIC and MPI on mild steel (MS) in an acidic environment (0.5 M H₂SO₄) were investigated by employing methodologies including open circuit potential (OCP), electrochemical impedance spectroscopy (EIS), and potentiodynamic polarization (PDP). As the studied indole derivatives adsorbed on the surface of MS, they created a barrier to mass and charge movement, shielding the MS from dangerous ions. It was observed that the inhibitory efficiency (%EF) values increased with the molar concentration of indole derivatives (FIC and MPI). At all concentrations, the two indole derivatives being studied, FIC and MPI, had high efficiency values. The highest efficiencies at 90 ppm were 81.2% with MPI and 76.2% with FIC. The polarization curves also clearly showed that MPI and FIC function as mixed-type inhibitors. Additionally, this study used density functional theory (DFT) and molecular dynamics (MD) simulations to investigate how well the two indole derivatives prevented mild steel corrosion. Full article

Background/Objectives: Hyperlipidemia is a silent threat lurking in the bloodstream of millions worldwide. The nano-based platform has emerged as a promising drug delivery technology. Repaglinide, an anti-diabetic drug, was investigated recently as an antihyperlipidemic candidate that could supersede the available antihyperlipidemic drugs. Our goal was to optimize albumin-based nanoparticles loaded with Repaglinide for parenteral delivery and conduct in silico and in vivo studies to explore the efficacy of Repaglinide for the management of hyperlipidemia along with its anti-diabetic effect. Methods: The impact of three independent factors, the albumin%, acetone volume, and glutaraldehyde/albumin, on the particle size, zeta potential, and entrapment efficiency was investigated. Results: The optimized formulation was spherical, homogenous of an average diameter (~181.86 nm) with a narrow size distribution, a zeta potential of −24.26 mV, and 76.37% as the EE%. The in vitro release of Repaglinide from nanoparticles showed a sustained release pattern for 168 h, with an initial burst release after 24 h, and was fitted to the Fickian diffusion mechanism. A molecular docking simulation showed a strong affinity to several protein targets, and the results were very promising, where Repaglinide gave a score of −7.70 Kcal/mol compared to Mevastatin (−6.71 Kcal/mol) and Atorvastatin (−8.36 Kcal/mol). On conducting in vivo studies on animal models, the optimized formula recorded a statistically significant decrease in the serum levels of total cholesterol, triglyceride, and low-density lipoproteins, with an increased high-density lipoprotein. Conclusions: This study suggested albumin nanoparticles as potential nanocarriers for the parenteral delivery of Repaglinide to ameliorate its antihyperlipidemic benefits, especially in diabetic patients. Full article

Boron (B) neutron capture therapy (BNCT) is a novel non-invasive targeted cancer therapy based on the nuclear capture reaction ¹⁰B (n, alpha) ⁷Li that enables the death of cancer cells without damaging neighboring normal cells. However, the development of clinically approved boron drugs remains challenging. We have previously reported on self-forming nanoparticles for drug delivery consisting of a biodegradable polymer, namely, “AB-type” Lactosome^® nanoparticles (AB-Lac particles)- highly loaded with hydrophobic B compounds, namely o-Carborane (Carb) or 1,2-dihexyl-o-Carborane (diC6-Carb), and the latter (diC6-Carb) especially showed the “molecular glue” effect. Here we present in vivo and ex vivo studies with human pancreatic cancer (AsPC-1) cells to find therapeutically optimal formulas and the appropriate treatment conditions for these particles. The biodistribution of the particles was assessed by the tumor/normal tissue ratio (T/N) in terms of tumor/muscle (T/M) and tumor/blood (T/B) ratios using near-infrared fluorescence (NIRF) imaging with indocyanine green (ICG). The in vivo and ex vivo accumulation of B delivered by the injected AB-Lac particles in tumor lesions reached a maximum by 12 h post-injection. Irradiation studies conducted both in vitro and in vivo showed that AB-Lac particles-loaded with either ¹⁰B-Carb or ¹⁰B-diC6-Carb significantly inhibited the growth of AsPC-1 cancer cells or strongly inhibited their growth, with the latter method being significantly more effective. Surprisingly, a similar in vitro and in vivo irradiation study showed that ICG-labeled AB-Lac particles alone, i.e., without any ¹⁰B compounds, also revealed a significant inhibition. Therefore, we expect that our ICG-labeled AB-Lac particles-loaded with ¹⁰B compound(s) may be a novel and promising candidate for providing not only NIRF imaging for a practical diagnosis but also the dual therapeutic effects of induced cancer cell death, i.e., “theranostics”. Full article

Eco-friendly iron and manganese oxide nanoparticles (Fe₂O₃ and Mn₂O₃) were synthesized and integrated into graphene sheets to form uniform composites. These composites were then embedded in polyvinyl alcohol (PVA) fibers using electrospinning. Comprehensive characterization of the composites and the final composite fibers was conducted using XRD, FE-SEM, and FTIR to analyze their structural complexity and morphological differences. The antibacterial efficacy of the resulting PVA nanofibers was evaluated against Escherichia coli, which is a common pathogen in hospital environments. The results show a significant bactericidal effect against these bacteria, which highlights their potential in medical applications, such as functional bandages and wound dressings. This study paves the way for potential commercial applications of these nanofibers in healthcare settings. Full article

Objectives: Lower urinary tract symptoms (LUTSs) related to benign prostatic hyperplasia (BPH) are common in older men, and alpha-adrenoceptor blockers continue to be a key part of managing these symptoms. This study aimed to formulate injectable poly (lactic-co-glycolic acid) (PLGA) in situ-forming implants (ISFIs) loaded with silodosin (SLD) to address symptoms associated with BPH. This method, which ensures prolonged therapeutic effects of SLD, is intended to decrease dosing frequency and improve treatment outcomes, leading to better patient adherence. Methods: An appropriate solvent with favorable PLGA solubility, viscosity, and in vitro release profile was selected. Additionally, an I-optimal design was employed as an optimization technique. An in vivo study in albino male rats was conducted to investigate prostate-specific antigens (PSAs), prostate weight and prostatic index, histopathology, and SLD pharmacokinetics. Results: The optimized formulation showed experimental values of 29.25% for the initial burst after 2 h and 58.23% for the cumulative release of SLD after 10 days. Pharmacokinetic data revealed that the SLD–ISFI formulation had lower C_max and higher AUC values than subcutaneous (SC) pure SLD and oral commercial SLD capsule, indicating the controlled-release impact and improved bioavailability of the ISFI systems. SLD–ISFI produced a marked drop in the prostatic index by 2.09-fold compared to the positive control. Serum PSA level decreased significantly from 0.345 ± 0.007 to 0.145 ± 0.015 ng/mL after SLD–ISFI injection compared to the positive control. Conclusions: This study indicated that the optimized SLD–ISFI formulation proved its efficacy in managing BPH. Full article

Lettuce (Lactuca sativa) is rich in vitamins, minerals, and bioactive components, serving as an important source of selenium (Se) intake for humans. This study investigated the effects of Se treatment on lettuce using different concentrations of sodium selenite (Na₂SeO₃), focusing on biomass, physiological indicators, nutritional composition, and physiological changes during storage. Through correlation analysis of the transcriptome and Se species, the absorption and conversion mechanisms of Se in lettuce were revealed. The results showed that Se treatment initially increased the chlorophyll content in lettuce, followed by a decrease. Soluble sugar, soluble protein, total phenols, and anthocyanins increased at low Se concentrations but decreased at high concentrations. Flavonoid content decreased only at 1 mg/L Se, while other treatments were higher than the control group. GSH content and superoxide dismutase, catalase, and peroxidase activities initially increased and then decreased, while malondialdehyde (MDA) content first decreased and then increased. Five Se species, including Se (IV), Se (VI), selenocysteine (SeCys₂), selenomethionine (SeMet), and methylselenocysteine (MeSeCys), were detected in lettuce leaves after Se treatment, with SeMet being the most abundant. During storage, Se-treated lettuce exhibited lower weight loss, a*, b*, browning index, and color difference (ΔE) values compared to the control group. CAT and POD activities and GSH content also followed a trend of initial increase followed by a decrease. Transcriptome data analysis revealed that genes such as MYB1, RPK1, PTR44, NTRC, WRKY7, and CSLD3 were associated with the stress response of Se-treated lettuce. Full article