Search Results (471)

Androgenetic alopecia (AGA) is the most prevalent form of alopecia areata. Traditional treatment options, including minoxidil, finasteride, and hair transplantation, have their limitations, such as skin irritation, systemic side effects, invasiveness, and high costs. The transdermal drug delivery system (TDDS) offers an innovative approach for treating AGA by administering medications through the skin to achieve localized and efficient delivery while overcoming the skin barrier. This review systematically explores the application of TDDS in AGA treatment, highlighting emerging technologies such as microneedles (MNs), liposomes, ionic liquids (ILs), nanostructured lipid carriers (NLCs), and transporters (TFs). It analyzes the underlying mechanisms that enhance drug penetration through hair follicles. Finally, this review presents a forward-looking perspective on the future use of TDDS in the management of AGA, aiming to provide insights and references for designing effective transdermal drug delivery systems for this condition. Full article

The increasing demand for sustainable disease management in aquaculture has intensified interest in plant-based therapeutics. This study evaluated the formulation and efficacy of andrographolide-loaded nanostructured lipid carriers (AND-NLCs) in Nile tilapia (Oreochromis niloticus) challenged with Streptococcus agalactiae ENC06. AND-NLCs were prepared by the phase-inversion technique and characterized by dynamic light scattering, transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), and in vitro release profiling. Antibacterial activity was assessed by measuring inhibition zone diameters, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC). Growth performance, feed utilization, hepatosomatic index (HSI), and disease resistance were evaluated over a 60-day feeding trial. The AND-NLCs exhibited an optimal particle size (189.6 nm), high encapsulation efficiency (90.58%), sustained release, and structural stability. Compared to the free AND and control group, AND-NLC supplementation significantly improved growth, feed efficiency, HSI, and positive allometric growth. It also enhanced survival (73.3%) and relative percent survival (RPS = 65.6%) following S. agalactiae ENC06 infection. Antibacterial efficacy and physiological responses showed positive correlations with nanoparticle characteristics. These findings suggest that AND-NLCs enhance bioavailability and therapeutic efficacy, supporting their potential as a functional dietary additive to promote growth and improve disease resistance in tilapia aquaculture. Full article

Background: Liposomes and, more recently, structured nanolipid particles have demonstrated effectiveness as carriers for delivering hydrophilic or lipophilic anticancer agents, enhancing their biocompatibility, bioavailability, and sustained release to target cells. Objective: Herein, four doxorubicin formulations—comprising either the acidic or neutral form—were encapsulated into liposomes (Lipo) or nanostructured lipid carriers (NLCs) and characterized in terms of size, entrapment efficiency, morphology, and effects on two cancer cell lines (melanoma B16-F10 and breast carcinoma Walker 256 cells). Methods and Results: While liposomal formulations containing acidic doxorubicin displayed IC₅₀ values ranging from 1.33 to 0.37 µM, NLC-based formulations, particularly NLC-Doxo@Ac, demonstrated enhanced cytotoxicity with IC₅₀ values as low as 0.58 µM. Neutral Doxorubicin demonstrated lower cytotoxicity in both the nanoformulations and cell lines. Differences were also observed in their internalization patterns, cell-cycle impact, and apoptotic/necrotic effects. Compared to liposomes, NLCs exhibited distinct internalization patterns and induced stronger cell-cycle arrest and necrosis, especially in melanoma cells. Notably, NLC-Doxo@Ac outperformed liposomal counterparts in melanoma cells, while liposomal formulations showed slightly higher efficacy in Walker cells. Early and late apoptosis were more pronounced in Walker cells, whereas necrosis was more prominent in melanoma B16-F10 cells, particularly with the nanolipid formulations. Conclusions: These results correlated positively with cell-cycle measurements, highlighting the potential of NLCs as an alternative to liposomes for the delivery of neutral or acidic doxorubicin, particularly in tumor types that respond poorly to conventional formulations. Full article

Bio-nanocomposites based on poly (vinyl alcohol) (PVA) and cellulosic nanostructures are favorable for active food packaging applications. The current study systematically investigates the mechanical properties, gas permeation, and swelling parameters of PVA composites with cellulose nanocrystals (CNC) or nano lignocellulose (NLC) fibers. Alterations in these macroscopic properties, which are critical for food packaging applications, are correlated with structural information at the molecular level. Strong interactions between the fillers and polymer host matrix were observed, while the PVA crystallinity exhibited a maximum at ~1% loading. Finally, the orientation of the PVA nanocrystals in the uniaxially stretched samples was found to depend non-monotonically on the CNC loading and draw ratio. Concerning the macroscopic properties of the composites, the swelling properties were reduced for the D1 food simulant, while for water, a considerable decrease was observed only when high NLC loadings were involved. Furthermore, although the water vapor transmission rates are roughly similar for all samples, the CO₂, N₂, and O₂ gas permeabilities are low, exhibiting further decrease in the 1% and 1–5% loading for CNC and NLC composites, respectively. The mechanical properties were considerably altered as a consequence of the good dispersion of the filler, increased crystallinity of the polymer matrix, and morphology of the filler. Thus, up to ~50%/~170% enhancement of the Young’s modulus and up to ~20%/~50% enhancement of the tensile strength are observed for the CNC/NLC composites. Interestingly, the elongation at break is also increased by ~20% for CNC composites, while it is reduced by ~40% for the NLC composites, signifying the favorable/unfavorable interactions of cellulose/lignin with the matrix. Full article

The advancement of efficient drug delivery systems continues to pose a significant problem in pharmaceutical sciences, especially for compounds with limited water solubility. Lipid-based systems, including solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs), have emerged as viable options owing to their biocompatibility, capability to safeguard labile chemicals, and potential for prolonged release. Nonetheless, the encapsulation efficiency (EE) and release dynamics of these carriers can be enhanced by including cyclodextrins (CDs)—cyclic oligosaccharides recognized for their ability to form inclusion complexes with hydrophobic compounds. This article offers an extensive analysis of CD-modified SLNs and NLCs as multifunctional drug delivery systems. The article analyses the fundamental principles of these systems, highlighting the pre-complexation of the drug with cyclodextrins before lipid incorporation, co-encapsulation techniques, and surface adsorption after formulation. Attention is concentrated on the physicochemical interactions between cyclodextrins and lipid matrices, which influence essential factors such as particle size, encapsulation efficiency, and colloidal stability. The review includes characterization techniques, such as particle size analysis, zeta potential measurement, drug release studies, and Fourier-transform infrared spectroscopy (FT-IR)/Nuclear Magnetic Resonance (NMR) analyses. The study highlights the application of these systems across many routes of administration, including oral, topical, and mucosal, illustrating their adaptability and potential for targeted delivery. The review outlines current formulation challenges, including stability issues, drug leakage, and scalability concerns, and proposes solutions through advanced approaches, such as stimuli-responsive release mechanisms and computer modeling for system optimization. The study emphasizes the importance of regulatory aspects and outlines future directions in the development of CD-lipid hybrid nanocarriers, showcasing its potential to revolutionize the delivery of poorly soluble drugs. Full article

Hydraulic excavators operate in harsh environments where direct measurement of actuator chamber pressures and boom displacement is often unreliable or infeasible. This study presents a novel control strategy that estimates actuator chamber pressures from work port pressures using differential equations, eliminating the need for direct pressure or position sensors. A fuzzy logic-based proportional–derivative (PD) controller is developed to mitigate boom oscillations, particularly under high-inertia load conditions and variable operator inputs. The controller dynamically adjusts gains through fuzzy logic-based gain scheduling, enhancing adaptability across a wide range of operating conditions. The proposed method addresses the limitations of classical PID controllers, which struggle with the nonlinearities, parameter uncertainties, and instability introduced by counterbalance valves and pressure-compensated proportional valves. Experimental data is used to design fuzzy rules and membership functions, ensuring robust performance. Simulation and full-scale experimental validation demonstrate that the fuzzy PD controller significantly reduces pressure overshoot (by 23% during extension and 32% during retraction) and decreases settling time (by 31.23% and 28%, respectively) compared to conventional systems. Frequency-domain stability analysis confirms exponential stability and improved damping characteristics. The proposed control scheme enhances system reliability and safety, making it ideal for excavators operating in remote or rugged terrains where conventional sensor-based systems may fail. This approach is generalizable and does not require modifications to the existing hydraulic circuit, offering a practical and scalable solution for modern hydraulic machinery. Full article

Background/Objectives: Clofazimine (CFZ) is a versatile antimicrobial active against several bacterial species, although its reduced aqueous solubility and the occurrence of side effects limit its use. Nanostructured lipid carriers (NLCs) constitute an interesting approach to increase drug bioavailability and safety. However, the development of nanoparticle-based formulations is challenging. In the present work, a combination of smart pharmaceutical technology approaches was proposed to develop CFZ-loaded NLCs, taking advantage of previous knowledge on NLCs screening. Methods: A design space previously established using Artificial Intelligence (AI) tools was applied to develop CFZ-loaded NLC formulations. After formulation characterization, Neurofuzzy Logic (NFL) and in silico docking simulations were employed to enhance the understanding of lipid nanocarriers. Then, the performance of formulations designed following NFL guidelines was characterized in terms of biocompatibility, using murine fibroblasts, and antimicrobial activity against several strains of Staphylococcus aureus. Results: The followed approach enabled CFZ-loaded NLC formulations with optimal properties, including small size and high antimicrobial payload. NFL was useful to investigate the existing interactions between NLC components and homogenization conditions, that influence CFZ-loaded NLCs’ final properties. Also, in silico docking simulations were successfully applied to examine interactions and affinity between the drug and the lipid matrix components. Finally, the designed CFZ-loaded formulations demonstrated suitable biocompatibility, together with antimicrobial activity. Conclusions: The implementation of smart strategies during nanoparticle-based therapeutics development, such as those described in this manuscript, would enable the more efficient design of new systems for suitable antimicrobial delivery. Full article

Nose-to-brain drug delivery is an innovative approach that leverages the unique anatomical pathways connecting the nasal cavity to the brain, including the olfactory and trigeminal nerve routes. This method bypasses the blood–brain barrier, enabling direct and efficient transport of therapeutic agents to the central nervous system. It offers significant advantages, such as rapid drug action, reduced systemic side effects, and improved patient compliance through non-invasive administration. This entry summarizes factors affecting the nose-to-brain delivery of drugs and the recent development of nanoparticle-based nose-to-brain delivery. Full article

Background/Objectives: Rifampicin is a typical antibiotic used for the treatment of Staphylococcus aureus (S. aureus) infections; however, its clinical utility is limited by poor aqueous solubility, chemical instability, and increasing bacterial resistance. Nanostructured lipid carriers (NLCs) offer a promising strategy to improve drug solubility, stability, and antimicrobial performance. Methods: In this study, rifampicin-loaded NLC (NLC-RIF) was developed using a hot homogenization with a low energy method and characterized in terms of particle size, polydispersity index, zeta potential, encapsulation efficiency, colloidal stability, and drug loading. Results: In vitro release studies under sink conditions demonstrated a biphasic release pattern, best described by the Korsmeyer–Peppas model, suggesting a combination of diffusion and matrix erosion mechanisms. Antimicrobial activity against S. aureus revealed a substantial increase in potency for NLC-RIF, with an IC₅₀ of 0.46 ng/mL, approximately threefold lower than that of free rifampicin. Cytotoxicity assays in HepG2 cells confirmed over 90% cell viability across all tested concentrations. Conclusions: These findings highlight the potential of NLC-RIF as a biocompatible and effective nanocarrier system for enhancing rifampicin delivery and antibacterial activity. Full article

Background/Objectives: Difenoconazole (DFC) is a broad-spectrum fungicide. However, its application is limited due to poor aqueous solubility. Drugs with low solubility can be better absorbed using nanostructured lipid carriers (NLCs). Hence, the application of DFC in an NLC delivery system is proposed. Methods: Difenoconazole-loaded nanostructured lipid carriers (DFC-NLCs) with different solid–liquid lipid ratios were prepared by solvent diffusion method. Key physicochemical parameters, including particle diameter, surface charge (zeta potential), drug encapsulation efficiency, and morphological characteristics, were systematically characterized. Using Rhizoctonia solani (R. solani) as the model strain, inhibitory efficiency of DFC-NLC dispersion was compared with that of commercial dosage forms, such as 25% DFC emulsifiable concentrate (DFC-EC) and 40% DFC suspension concentrate (DFC-SC). Additionally, uptakes of DFC-NLC dispersions in R. solani were further observed by fluorescence probe technology. The safety profiles of DFC-NLCs and commercial dosage forms were evaluated using zebrafish as the model organism. Acute toxicity studies were conducted to determine the maximum non-lethal concentration (MNLC) and 10% lethal concentration (LC₁₀). Developmental toxicity studies were performed to observe toxic phenotypes. Results: DFC-NLC dispersions were in the nanometer range (≈200 nm) with high zeta potential, spherical in shape with encapsulation efficiency 69.1 ± 1.8%~95.0 ± 2.6%, and drug loading 7.1 ± 0.3%~9.7 ± 0.6% determined by high-performance liquid chromatography coupled with tandem mass spectrometry (HPLC-MS/MS). Compared with commercial dosage forms, the antifungal effect of the DFC-NLC on R. solani was significantly improved in in vitro antibacterial experiments (p < 0.05). The 50% effective concentration (EC₅₀) values were 0.107 mg·L⁻¹ (DFC-NLC), 0.211 mg·L⁻¹ (DFC-EC), and 0.321 mg·L⁻¹ (DFC-SC), respectively. The uptakes of FITC-labeled DFC-NLC demonstrated that an NLC was appropriate to deliver DFC into pathogen to enhance the target effect. In safety assessment studies, DFC-NLCs exhibited a superior safety profile compared with commercial formulations (p < 0.05). Conclusions: This study investigates the feasibility of NLCs as delivery systems for poorly water-soluble fungicides, demonstrating their ability to enhance antifungal efficacy and reduce environmental risks. Full article

Background/Objectives: Continuous manufacturing is gaining importance in the nanopharmaceutical field, offering improved process efficiency and product consistency. To fully leverage its potential, the integration of Process Analytical Technology (PAT) tools is essential for real-time quality control and robust process monitoring. Among the critical quality attributes (CQAs) of nanosystems, particle size plays a key role in ensuring product consistency and performance. However, real-time size monitoring remains challenging due to complex process dynamics and nanosystem heterogeneity. Methods: This study evaluates the applicability of conventional Dynamic Light Scattering (DLS) and spatially resolved DLS (SR-DLS) using the NanoFlowSizer (NFS) as PAT tools in a temperature-regulated top-down nano-production line. Various lipid-based nanosystems, including solid lipid nanoparticles (SLN), nanostructured lipid carriers (NLC), and nanoemulsions (NEs), were investigated. To ensure reliable implementation, key factors such as sample dilution, viscosity, focus position, measurement angle and temperature effects were systematically assessed for offline and at-line DLS using the Litesizer 500, as well as for offline, inline, and online SR-DLS using the NFS. Results: Offline screening confirmed that selecting the appropriate dilution medium and rate ensures measurement reliability. At-line methods provided an efficient alternative by enabling rapid final product control with minimal manual intervention. Inline and online monitoring further enhanced process efficiency by enabling real-time tracking of size, reducing waste, and allowing immediate process adjustments. Conclusions: This study demonstrates that integrating offline, at-line, in-line, and online DLS techniques allows for comprehensive product monitoring throughout the entire production line. This approach ensures a streamlined process, enables real-time adjustments, and facilitates reliable quality control after production and during storage. Full article

Hydrostatic transmissions are essential in applications demanding variable torque and speed, such as mining and agricultural machinery, due to their compact design, high power-to-weight ratio, and efficient variable speed control. Despite these advantages, their inherent nonlinearities and susceptibility to parametric uncertainties pose significant challenges for precise motion control. This study presents a comparative analysis of classical PID and robust H-infinity controllers for regulating the speed of hydraulic motors under varying torsional loads. A linearized uncertain system model is developed using upper Linear Fractional Transformations (LFTs) to capture key parametric uncertainties. A simplified H-infinity controller is designed to robustly manage system dynamics, particularly addressing phase lags induced by uncertain loads. Simulation results demonstrate that the H-infinity controller offers superior performance over the PID controller in terms of stability, disturbance rejection, and robustness to load fluctuations. This work contributes a practically viable robust control solution for improving the reliability and precision of electro-hydraulic systems, particularly in demanding, real-world environments. Full article

Objectives: This study aimed to develop and evaluate nanostructured lipid carriers (NLCs) loaded with meloxicam (Melox) and a therapeutic antibacterial and anti-inflammatory liquid lipid, clove oil (CO) for periodontitis treatment, a complex inflammatory condition necessitating advanced drug delivery systems. The NLC–Melox formulation was integrated into three hydrogels, hypromellose (HPMC), zinc hyaluronate (ZnHA), and sodium hyaluronate (NaHA), to conduct a comparative analysis focusing on enhanced localized drug delivery, improved mucoadhesion, prolonged retention, and significant therapeutic outcomes. Methods: NLC–Melox was prepared by homogenization and characterized by dynamic light scattering (DLS). Subsequently, NLC–Melox-loaded gels were subjected to transmission electron microscopy (TEM), differential scanning calorimetry (DSC), X-ray diffraction (XRD), Raman spectroscopy, and rheological analysis. In vitro drug release, anti-inflammatory activity (BSA denaturation assay), and antibacterial efficacy (MIC, MBC) were investigated to assess therapeutic potential. Results: DLS revealed a particle size of 183 nm with a polydispersity index of 0.26, indicating homogeneity. TEM confirmed consistent morphology and uniform nanoparticle distribution. DSC and XRD demonstrated the amorphous nature of Melox, enhancing solubility and stability. Spectroscopy confirmed no chemical interactions between components. Rheological studies identified ZnHA as the most mucoadhesive and structurally stable gel. In vitro release studies showed sustained drug release over 24 h. Melox and CO-loaded formulations demonstrated significant anti-inflammatory activity and notable antibacterial efficacy due to the antibacterial oil. Conclusions: The study highlighted the potential of NLC-based mucoadhesive hydrogels as an effective strategy for periodontitis treatment. The formulation offered improved drug solubility, therapeutic efficacy, mucoadhesivity, and prolonged delivery, making it a promising candidate for localized therapy. Full article

In recent decades, nose-to-brain drug delivery has shown effectiveness in treating many central nervous system diseases. Intranasally administered drugs can be delivered to the brain through the olfactory and trigeminal pathways that bypass the blood–brain barrier. However, nose-to-brain drug delivery is challenging due to the inadequate nasal mucosa absorption of drugs and the short retention time of the intranasal formulations. These problems can be minimized through the use of nano-drug delivery systems, such as micelles, polymeric nanoparticles, nanoemulsions, liposomes, solid lipid nanoparticles, and nanostructured lipid carriers. They can enhance the drug’s bioavailability in the brain via increases in drug solubility, permeation, and stability. Nose-to-brain nano-drug delivery systems have been evaluated in vivo by a number of research groups. This review aims to provide an overview of nose-to-brain delivery and recent advances in the development of nano-drug delivery systems for delivering drugs from the nose to the brain to improve the treatment of some central nervous system diseases. Full article

Background/Objectives: The aim of the present study was to develop nanostructured lipid carrier (NLC)-filled hydrogel beads for the delivery of curcumin in functional foods. Methods: Curcumin-loaded NLC-filled hydrogel beads based on calcium alginate were developed using the extrusion method. Various preparation parameters, physicochemical characteristics, gastrointestinal fates, and antioxidant bioactivities were studied to confirm the feasibility of this delivery system. Results: Curcumin-loaded NLCs were successfully filled into hydrogel beads with an encapsulation efficiency above 80%. The stability test displayed that the stability of curcumin encapsulated within NLCs was further enhanced when the NLCs were filled into beads. During in vitro digestion, the lipolysis rate of the lipid matrix and the release rate of curcumin encapsulated in NLCs were adjusted by the hydrogel beads. The ex vivo intestinal permeation study indicated that the intestinal permeation of curcumin from the digestion products of curcumin-loaded NLC-hydrogel beads, prepared with appropriate alginate concentrations (0.5% and 1%), was significantly enhanced compared to that of curcumin-loaded NLCs. Furthermore, the digestion products of curcumin-loaded NLC-hydrogel beads (1% alginate) exhibited significantly enhanced antioxidant bioactivity compared to those of curcumin-loaded NLCs. Conclusions: This study demonstrated that NLC-hydrogel beads might be a promising delivery system for hydrophobic bioactive compounds in functional food systems. Full article