Search Results (36,072)

With the rapid increase in global lithium demand, the exploration of newly discovered lithium in the bauxite of the Wenshan area in southeastern Yunnan has become increasingly important. However, the current research on clay-type lithium in the Wenshan area has primarily focused on local exploration, and large-scale predictive metallogenic studies remain limited. To address this, this study utilized multi-source remote sensing data from ZY1-02D and ASTER, combined with ALOS 12.5 m DEM and Sentinel-2 imagery, to carry out remote sensing mineral identification, structural interpretation, and prospectivity mapping for clay-type lithium in the Wenshan area. This study indicates that clay-type lithium in the Wenshan area is controlled by NW, EW, and NE linear structures and are mainly distributed in the region from north of the Wenshan–Malipo fault to south of the Guangnan–Funing fault. High-value areas of iron-rich silicates and iron–magnesium minerals revealed by ASTER data indicate lithium enrichment, while montmorillonite and cookeite identification by ZY1-02D have strong indicative significance for lithium. Field verification samples show the highest Li₂O content reaching 11,150 μg/g, with six samples meeting the comprehensive utilization criteria for lithium in bauxite (Li₂O ≥ 500 μg/g) and also showing an enrichment of rare earth elements (REEs) and gallium (Ga). By integrating stratigraphic, structural, mineral identification, geochemical characteristics, and field verification data, ten mineral exploration target areas were delineated. This study validates the effectiveness of remote sensing technology in the exploration of clay-type lithium and provides an applicable workflow for similar environments worldwide. Full article

Background: Disease-modifying drugs (DMDs) for multiple sclerosis (MS) slightly increase the risk of tuberculosis (TB) disease. The QuantiFERON-TB-Plus (QFT-Plus) test is approved for TB infection (TBI) screening. Currently, there are no data available regarding the characterization of QFT-Plus response in patients with MS. Objectives: This study aimed to compare the magnitude of QFT-Plus responses between patients with MS and TBI (MS-TBI) and TBI subjects without MS (NON-MS-TBI). Additionally, discordant responses to TB1/TB2 stimulation were documented. Results were evaluated considering demographic and clinical data, particularly the impact of DMDs and the type of TB exposure. Methods: Patients with MS (N = 810) were screened for TBI (2018–2023). Thirty (3.7%) had an MS-TBI diagnosis, and 20 were recruited for the study. As a control group, we enrolled 106 NON-MS-TBI. Results: MS-TBI showed significantly lower IFN-γ production in response to TB1 (p = 0.01) and TB2 stimulation (p = 0.02) compared to NON-MS-TBI. The 30% of TB2 results of MS-TBI fell into the QFT-Plus grey zone (0.2–0.7 IU/mL). Only 7% of NON-MS-TBI showed this profile (p = 0.002). Conclusions: MS-TBI had a lower QFT-Plus response and more borderline results compared to NON-MS-TBI. Future studies should clarify the significance of the borderline results in this vulnerable population to improve QFT-Plus accuracy regarding sensitivity, specificity, and TB prediction. Full article

Cotton fiber initiation determines the fiber yield, yet the genetic basis underlying lint and fuzz initiation has still not been fully uncovered. Here, map-based cloning was carried out to identify the fiberless mutant genes derived from a cross between Gossypium hirsutum acc. WT and a natural fiberless mutant, fbl_SHZ. The 12:3:1 segregation ratio in F₂ populations (including 1848 and 3100 individuals that were developed in 2016 and 2018, respectively) revealed dominant epistasis, with the fuzz gene exerting dominance over the lint gene. Genetic linkage analysis revealed that GhMYB25like_A12 controls fuzz fiber initiation, while both GhMYB25like_A12 and GhMYB25like_D12 regulate lint fiber development. Sequencing analyses showed that the fbl_SHZ mutant exhibited a K104M mutation in the R2R3 domain of GhMYB25like_A12 and a transposable element insertion in GhMYB25like_D12, leading to fiberless seeds. Knockout of GhMYB25like_A12 produced fuzzless seeds, knockout of GhMYB25like_D12 led to no obvious change in seeds, and knockout of both (GhMYB25like_A12&D12) resulted in fiberless seeds. The 12:3:1 ratio reappeared in the F₂ population developed from the GhMYB25like_A12&D12 mutated plants as female and Jin668 as the male, which further confirmed the genetic interaction observed in fbl_SHZ. RNA-seq analysis revealed that GhMYB25like regulates cotton fiber initiation through multiple pathways, especially fatty acid metabolism. This study elucidates the key genes and their genetic interaction mechanisms governing cotton fiber initiation, providing a theoretical foundation for genetic improvement of cotton fiber traits. Full article

Background: Oral leukoplakia (OL) and proliferative verrucous leukoplakia (PVL) remain challenging entities due to the absence of reliable prognostic biomarkers. All-trans retinoic acid (atRA), a pivotal modulator of epithelial differentiation and mucosal integrity, has been proposed as a candidate biomarker. This study sought to quantify plasma RA levels in patients with OL and PVL compared to healthy controls, assessing their potential clinical utility. Methods: A cohort of 40 participants was recruited, comprising 10 patients with OL, 10 with PVL, and 20 healthy controls. This nested case–control study was derived from previously characterized institutional databases of oral potentially malignant disorders. Plasma samples were analyzed for atRA concentration using high-precision mass spectrometry. Statistical comparisons were conducted to evaluate differences between groups and associations with clinical outcomes. Results: Patients with homogeneous OL exhibited significantly reduced plasma atRA concentrations (mean 2.17 ± 0.39 pg/mL) relative to both PVL patients (2.64 ± 0.56 pg/mL) and healthy controls (2.66 ± 0.92 pg/mL), with p-values of 0.009 and 0.039, respectively. No statistically significant difference was found between PVL patients and controls. Furthermore, atRA levels demonstrated no correlation with clinicopathological variables or malignant progression within the PVL cohort. Conclusions: These preliminary findings indicate that diminished plasma atRA levels may serve as a prognostic marker for homogeneous oral leukoplakia, whilst its role in PVL appears limited. However, effect estimates were imprecise, and additional studies are warranted. Full article

This study aims to enhance the performance of an innovative steel slag–ceramsite foam concrete (SSCFC) to advance sustainable green building materials. An eco-friendly composite construction material was developed by integrating industrial by-product steel slag (SS) with lightweight ceramsite. Employing a three-factor, three-level orthogonal experimental design at a fixed density of 800 kg/m³, 12 mix proportions (including a control group) were investigated with the variables of water-to-cement (W/C) ratio, steel slag replacement ratio, and ceramsite replacement ratio. The governing mechanisms of the W/C ratio, steel slag replacement level, and ceramsite replacement proportion on the SSCFC’s fluidity and compressive strength (CS) were elucidated. The synergistic application of range analysis and analysis of variance (ANOVA) quantified the significance of factors on target properties, and partial least squares regression (PLSR)-based prediction models were established. The test results indicated the following significance hierarchy: steel slag replacement > W/C ratio > ceramsite replacement for fluidity. In contrast, W/C ratio > ceramsite replacement > steel slag replacement governed the compressive strength. Verification showed R² values exceeding 65% for both fluidity and CS predictions versus experimental data, confirming model reliability. Multi-criteria optimization yielded optimal compressive performance and suitable fluidity at a W/C ratio of 0.4, 10% steel slag replacement, and 25% ceramsite replacement. Full article

Background and Objectives: Total hip arthroplasty (THA) following pelvic osteotomy for developmental dysplasia of the hip (DDH) is technically challenging due to altered acetabular morphology. This study aimed to compare radiographic cup position and perioperative characteristics of THA after three common pelvic osteotomies—periacetabular osteotomy (PAO), shelf procedure, and Chiari osteotomy—with primary THA in Crowe type I DDH. Methods: A retrospective review identified 25 hips that underwent conversion THA after pelvic osteotomy (PAO = 12, shelf = 8, Chiari = 5) and 25 primary THAs without prior osteotomy. One-to-one matching was performed based on sex (exact match), age (within 5 years), and BMI (within 2 kg/m²) without the use of propensity scores. Cup inclination, radiographic anteversion, center-edge (CE) angle, and cup height were measured on standardized anteroposterior radiographs (ICC = 0.91). Operative time, estimated blood loss, and use of bulk bone grafts or reinforcement rings were reviewed. One-way ANOVA with Dunnett’s post hoc test and chi-square test were used for statistical comparison. Results: Cup inclination, anteversion, and CE angle did not differ significantly among groups. Cup height was significantly greater in the PAO group than in controls (29.0 mm vs. 21.8 mm; p = 0.0075), indicating a more proximal hip center. The Chiari and shelf groups showed upward trends, though not significant. Mean operative time tended to be longer after PAO (123 min vs. 93 min; p = 0.078). Bulk bone grafts and reinforcement rings were more frequently required in the PAO group (17%; p = 0.036 vs. control), and occasionally in Chiari cases, but not in shelf or control groups. Conclusions: THA after PAO is associated with higher cup placement and greater need for reconstructive devices, indicating increased technical complexity. In contrast, shelf and Chiari conversions more closely resemble primary THA. Preoperative planning should consider hip center translation and bone-stock restoration in post-osteotomy THA. Full article

The evidence for photobiomodulation in reducing postoperative pain after endodontic instrumentation is classified as low or very low certainty, indicating a need for further research. Longitudinal pain assessments over 24 h are crucial, and studies should explore these pain periods. Background/Objectives: This double-blind, randomized controlled clinical trial evaluated the effect of PBM on pain following single-visit endodontic treatment of maxillary molars at 4, 8, 12, and 24 h. Primary outcomes included pain at 24 h; secondary outcomes included pain at 4, 8, and 12 h, pain during palpation/percussion, OHIP-14 analysis, and frequencies of pain. Methods: Approved by the Research Ethics Committee (5.598.290) and registered in Clinical Trials (NCT06253767), the study recruited adults (21–70 years) requiring endodontic treatment in maxillary molars. Fifty-eight molars were randomly assigned to two groups: the PBM Group (n = 29), receiving conventional endodontic treatment with PBM (100 mW, 333 mW/cm², 9 J distributed at 3 points near root apices), and the control group (n = 29), receiving conventional treatment with PBM simulation. Pain was assessed using the Visual Analog Scale. Results: Statistical analyses used chi-square and Mann–Whitney tests, with explained variance (η²). Ten participants were excluded, leaving 48 patients for analysis. No significant differences were observed in postoperative pain at 24, 4, 8, or 12 h, or in palpation/percussion or OHIP-14 scores. Pain frequencies ranged from 12.5% to 25%. Conclusions: PBM does not influence post-treatment pain in maxillary molars under these conditions. These results emphasize the importance of relying on well-designed clinical trials to guide treatment decisions, and future research should focus on personalized dosimetry adapted to the anatomical characteristics of the treated dental region to enhance the accuracy and efficacy of therapeutic protocols. Full article

This study investigates the effectiveness of passive design in low-rise residential buildings located in arid desert climates, using the Dubai Solar Decathlon Middle East (SDME) competition as a case study. This full-scale experiment offers a unique opportunity to evaluate design solutions under controlled, realistic conditions; prescriptive, modeled performance; and monitored performance assessments. The prescriptive assessment reviews geometry, orientation, envelope thermal properties, and shading. Most houses adopt compact forms, with envelope-to-volume and envelope-to-floor area ratios averaging 1 and 3.7, respectively, and window-to-wall ratios of approximately 17%, favoring north-facing openings to optimize daylight while reducing heat gain. Shading is strategically applied, horizontal on south façades and vertical on east and west. The thermal properties significantly exceed the local code requirements, with wall performance up to 80% better than that mandated. The modeled assessment uses Building Energy Models (BEMs) to simulate the impact of prescriptive measures on energy performance. Three variations are applied: assigning minimum local code requirements to all the houses to isolate the geometry (baseline); removing shading; and applying actual envelope properties. Geometry alone accounts for up to 60% of the variation in cooling intensity; shading reduces loads by 6.5%, and enhanced envelopes lower demand by 14%. The monitored assessment uses contest-period data. Indoor temperatures remain stable (22–25 °C) despite outdoor fluctuations. Energy use confirms that houses with good designs and airtightness have lower cooling loads. Airtightness varies widely (avg. 14.5 m³/h/m²), with some well-designed houses underperforming due to construction flaws. These findings highlight the critical role of passive design as the first layer for improving the energy performance of the built environment and advancing toward net-zero targets, specifically in arid desert climates. Full article

In the present study, we evaluated the potential use of a humic substance (HS)-based biostimulant in mitigating drought stress in lettuce (Lactuca sativa L.) by comparing both root and foliar modes of application. To achieve this, lettuce plants were grown in a growth chamber on a solid substrate composed of vermiculite and perlite (3:1). Plants were exposed to drought conditions (50% of Field Capacity, FC) and 50% FC + HS applied as radicular (‘R’) and foliar (‘F’) at concentrations: R-HS 0.40 and 0.60 mL/L, respectively, and 7.50 and 10.00 mL/L, respectively, along with a control (100% FC). HSs were applied three times at 10-day intervals. Plant growth, nutrient concentration, lipid peroxidation, reactive oxygen species (ROS), and enzymatic and non-enzymatic antioxidants were estimated. Various photosynthetic and chlorophyll fluorescence parameters were also analyzed. The results showed that HS applications alleviated drought stress, increased plant growth, and reduced lipid peroxidation and ROS accumulation. HSs also improved the net photosynthetic rate, carboxylation efficiency, electron transport flux, and water use efficiency. Although foliar HSs showed a greater tendency to enhance shoot growth and photosynthetic capacity, the differences between the application methods were not significant. Hence, in this preliminary work, the HS-based product evaluated in this study demonstrated potential for alleviating drought stress in lettuce plants at the applied doses, regardless of the mode of application. This study highlights HS-based biostimulants as an effective and sustainable tool to improve crop resilience and support sustainable agriculture under climate change. However, further studies under controlled growth chamber conditions are needed to confirm these results before field trials. Full article

Toothpaste is an essential oral hygiene product commonly used to sustain oral health due to its incorporation of antimicrobial agents. Numerous functional toothpastes enriched with antimicrobial agents have been developed and are available to consumers. This study evaluates the antimicrobial and antibiofilm efficacy of 12 commercially available toothpaste products, including those with specialized functions. Statistical significance was assessed to validate the differences observed among the toothpaste samples. Their effects on Streptococcus mutans, the primary pathogen responsible for dental caries, were evaluated. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) were determined, and bacterial growth was measured to compare antimicrobial activities. Toothpaste containing 1000 μg/mL fluoride and whitening toothpaste exhibited the strongest antimicrobial effects, effectively inhibiting S. mutans growth. Additionally, bamboo salt-enriched and tartar-control toothpaste demonstrated inhibitory effects on bacterial growth. Assays to evaluate the ability of cells to form biofilms and the expression of genes involved in biofilm formation revealed a partial correlation between biofilm formation and spaP, gtfB, gtfC, and gtfD expression, although some showed opposite trends. Collectively, this study provides valuable insights into the antimicrobial and biofilm inhibition capabilities of commercial toothpastes against S. mutans, offering a foundation for evaluating the efficacy of functional toothpaste products. Full article

Aims: Sinus tachycardia after heart transplantation (HTX) due to cardiac graft denervation is associated with reduced post-transplant survival and requires adequate treatment. We analyzed the long-term effects of heart rate control with ivabradine or metoprolol succinate in HTX recipients. Methods: This observational retrospective single-center study analyzed the ten-year results of 110 patients receiving ivabradine (n = 54) or metoprolol succinate (n = 56) after HTX. Analysis included comparison of demographics, medications, heart rates, blood pressure values, echocardiographic features, cardiac catheterization data, cardiac biomarkers, and post-transplant survival including causes of death. Results: Both groups showed no significant differences concerning demographics or medications (except for ivabradine and metoprolol succinate). At 10-year follow-up, HTX recipients with ivabradine showed a significantly lower heart rate (72.7 ± 8.5 bpm) compared to baseline (88.8 ± 7.6 bpm; p < 0.001) and to metoprolol succinate (80.1 ± 8.1 bpm; p < 0.001), a significantly lower NT-proBNP level (588.4 ± 461.4 pg/mL) compared to baseline (3849.7 ± 1960.0 pg/mL; p < 0.001) and to metoprolol succinate (1229.0 ± 1098.6 pg/mL; p = 0.005), a significantly lower overall mortality (20.4% versus 46.4%; p = 0.004), and mortality due to graft failure (1.9% versus 21.4%; p = 0.001). Multivariate analysis showed a significantly decreased risk of death within 10 years after HTX in patients with post-transplant use of ivabradine (HR 0.374, CI 0.182–0.770; p = 0.008). Conclusions: In this single-center trial, patients with ivabradine revealed a significantly more pronounced heart rate reduction, a lower NT-proBNP level, and a superior 10-year survival after HTX. Full article

Background/Objectives: Conventional ketogenic diets, although effective for weight loss, often contain high total and saturated fat intake, which leads to increased low-density lipoprotein cholesterol (LDL-C). Thus, the Healthy Ketogenic Diet (HKD) was developed to address these concerns. It emphasizes calorie restriction, limiting net carbohydrate intake to 50 g per day, prioritizing unsaturated fats, and reducing saturated fat intake. However, adherence to the HKD remains a challenge in urban, time-constrained environments. Therefore, this pilot randomized controlled trial aimed to investigate the effects of Healthy Ketogenic Diet Ready-To-Eat (HKD-RTE) meals (provided for the first month only) versus HKD alone on weight loss and metabolic parameters among overweight adults. Methods: Multi-ethnic Asian adults (n = 50) with a body mass index (BMI) ≥ 27.5 kg/m² were randomized into the HKD-RTE group (n = 24) and the HKD group (n = 26). Both groups followed the HKD for six months, with the HKD-RTE group receiving HKD-RTE meals during the first month. Five in-person workshops and mobile health coaching through the Nutritionist Buddy Keto app helped to facilitate dietary adherence. The primary outcome was the change in body weight at 6 months. Linear regression was performed on the change from baseline for each continuous outcome, adjusting for demographics and relevant covariates. Logistic regression was performed on binary weight loss ≥5%, adjusting for demographics and relevant covariates. Results: In the HKD group, participants’ adherence to the 50 g net carbohydrate target was 15 days, while that in the HKD-RTE group was 19 days over a period of 30 days. Participants’ adherence to calorie targets was 21 days in the HKD group and 23 days in the HKD-RTE. The average compliance with the HKD-RTE meals provided in the HKD-RTE group was 55%. The HKD-RTE group experienced a greater percentage weight loss at 1 month (−4.8 ± 3.0% vs. −1.8 ± 6.2%), although this was not statistically significant. This trend continued up to 6 months, with the HKD-RTE group showing a greater percentage weight reduction (−8.6 ± 6.8% vs. −3.9 ± 8.6%; p = 0.092). At 6 months, the HKD-RTE group had a greater reduction in total cholesterol (−0.54 ± 0.76 mmol/L vs. −0.05 ± 0.56 mmol/L; p = 0.283) and LDL-C (−0.43 ± 0.67 mmol/L vs. −0.03 ± 0.52 mmol/L; p = 0.374) compared to the HKD group. Additionally, the HKD-RTE group exhibited greater reductions in systolic blood pressure (−8.3 ± 9.7 mmHg vs. −5.3 ± 11.0 mmHg), diastolic blood pressure (−7.7 ± 8.8 mmHg vs. −2.0 ± 7.0 mmHg), and HbA1c (−0.3 ± 0.5% vs. −0.1 ± 0.4%) than the HKD group (not statistically significant for any). Conclusions: Both HKD-RTE and HKD led to weight loss and improved metabolic profiles. The HKD-RTE group tended to show more favorable outcomes. Short-term HKD-RTE meal provision may enhance initial weight loss, with sustained long-term effects. Full article

The Mayanghe National Nature Reserve, a key habitat for the endangered François’ langur (Trachypithecus francoisi), faces significant anthropogenic disturbances, including extensive distribution of croplands, roads, and settlements. These human-modified features are predominantly concentrated at elevations between 500 and 800 m and on slopes of 10–20°, which notably overlap with the core elevation range utilized by François’ langur. Spatial analysis revealed that langurs primarily occupy areas within the 500–800 m elevation band, which comprises only 33% of the reserve but hosts a high density of human infrastructure—including approximately 4468 residential buildings and the majority of cropland and road networks. Despite slopes >60° representing just 18.52% of the area, langur habitat utilization peaked in these steep regions (exceeding 85.71%), indicating a strong preference for rugged karst terrain, likely due to reduced human interference. Habitat type analysis showed a clear preference for evergreen broadleaf forests (covering 37.19% of utilized areas), followed by shrublands. Landscape pattern metrics revealed high habitat fragmentation, with 457 discrete habitat patches and broadleaf forests displaying the highest edge density and total edge length. Connectivity analyses indicated that distribution areas exhibit a more continuous and aggregated habitat configuration than control areas. These results underscore François’ langur’s reliance on steep, forested karst habitats and highlight the urgent need to mitigate human-induced fragmentation in key elevation and slope zones to ensure the species’ long-term survival. Full article

Root-knot nematode (Meloidogyne incognita) is a globally destructive plant-parasitic nematode that severely impedes the sustainable production of horticultural crops. Metabolic reprogramming in plant roots represents the host response to M. incognita infection that can also be exploited by the nematode to facilitate its parasitism. In this study, untargeted metabolomics was employed to analyze metabolic changes in cucumber roots following nematode inoculation, with the goal of identifying differentially accumulated metabolites that may influence M. incognita behavior. Metabolomic analysis revealed that M. incognita significantly altered the cucumber root metabolome, triggering an accumulation of lipids and organic acids and enriching biotic stress-related pathways such as alkaloid biosynthesis and linoleic acid metabolism. Among differentially accumulated metabolites, myristic acid and hexadecanal were selected for further study due to their potential roles in nematode inhibition. In vitro assays demonstrated that both metabolites suppressed egg hatching and reduced infectivity of M. incognita, while pot experiments indicated a correlation between their application and reduced root gall formation. Chemotaxis assays further revealed that both metabolites exerted repellent effects on the chemotactic migration of M. incognita J2 and suppressed the transcriptional expression of two motility-and feeding-related neuropeptides, Mi-flp-1 and Mi-flp-18. In conclusion, this study demonstrates the significant potential of differentially accumulated metabolites induced by M. incognita infection for nematode disease control, achieved by interfering with nematode chemotaxis and subsequent infection. This work also provides deeper insights into the metabolomic mechanisms underlying the cucumber-M. incognita interaction. Full article

Porous intermetallic compounds have the properties of porous materials as well as a combination of covalent and metallic bonds, and they exhibit high porosity, structural stability, and corrosion resistance. In this work, a porous TiNi₃ intermetallic compound was fabricated through reactive synthesis of elemental powders. Next, detailed studies of its phase composition and pore structure characteristics at different sintering temperatures, as well as its corrosion behavior against an alkaline environment, were carried out. The results show that the as-prepared porous TiNi₃ intermetallic compound has abundant pore structures, with an open porosity of 56.5%, which can be attributed to a combination of the bridging effects of initial powder particles and the Kirkendall effect occurring during the sintering process. In 1 M KOH solution, a higher positive corrosion potential (−0.979 V_SCE) and a lower corrosion current density (1.18 × 10⁻⁴ A∙cm⁻²) were exhibited by the porous TiNi₃ intermetallic compound, compared to the porous Ni, reducing the thermodynamic corrosion tendency and the corrosion rate. The corresponding corrosion process is controlled by the charge transfer process, and the increased charge transfer resistance value (713.9 Ω⋅cm²) of TiNi₃ makes it more difficult to charge-transfer than porous Ni (204.5 Ω⋅cm²), thus decreasing the rate of electrode reaction. The formation of a more stable passive film with the incorporation of Ti contributes to this improved corrosion resistance performance. Full article