Search Results (145)

The field of electrochemical devices, encompassing energy storage, fuel cells, electrolysis, and sensing, is fundamentally reliant on the electrode materials that govern their performance, efficiency, and sustainability. Traditional materials, while foundational, often face limitations such as restricted reaction kinetics, structural deterioration, and dependence on costly or scarce elements, driving the need for continuous innovation. Emerging electrode materials are designed to overcome these challenges by delivering enhanced reaction activity, superior mechanical robustness, accelerated ion diffusion kinetics, and improved economic feasibility. In energy storage, for example, the shift from conventional graphite in lithium-ion batteries has led to the exploration of silicon-based anodes, offering a theoretical capacity more than tenfold higher despite the challenge of massive volume expansion, which is being mitigated through nanostructuring and carbon composites. Simultaneously, the rise of sodium-ion batteries, appealing due to sodium’s abundance, necessitates materials like hard carbon for the anode, as sodium’s larger ionic radius prevents efficient intercalation into graphite. In electrocatalysis, the high cost of platinum in fuel cells is being addressed by developing Platinum-Group-Metal-free (PGM-free) catalysts like metal–nitrogen–carbon (M-N-C) materials for the oxygen reduction reaction (ORR). Similarly, for the oxygen evolution reaction (OER) in water electrolysis, cost-effective alternatives such as nickel–iron hydroxides are replacing iridium and ruthenium oxides in alkaline environments. Furthermore, advancements in materials architecture, such as MXenes—two-dimensional transition metal carbides with metallic conductivity and high volumetric capacitance—and Single-Atom Catalysts (SACs)—which maximize metal utilization—are paving the way for significantly improved supercapacitor and catalytic performance. While significant progress has been made, challenges related to fundamental understanding, long-term stability, and the scalability of lab-based synthesis methods remain paramount for widespread commercial deployment. The future trajectory involves rational design leveraging advanced characterization, computational modeling, and machine learning to achieve holistic, system-level optimization for sustainable, next-generation electrochemical devices. Full article

This study investigates amorphous anodized porous TiO₂ (a-TiO₂) as a substrate for iridium-based oxygen evolution catalysts. The substrates were prepared via anodization of Ti foil in a glycerol-based solution for 15 min @ 60 V. Nickel was subsequently electrodeposited to act both as a conductive and sacrificial layer for the galvanic deposition of iridium from an Ir(IV) chloro-complex solution. Electrochemical anodization resulted in a uniform IrO_x layer on the a-TiO₂ substrate, featuring Ir aggregates ~250 nm in size and an Ir:Ni atomic ratio of ca. 7, as determined by EDS analysis. The quantity of Ni determined by ICP-MS bulk analysis indicated that Ni resided also within the porous matrix. Varying the Ni deposition charge density (q_Ni) revealed that an intermediate loading (1463 mC cm⁻²) provided the best balance between Ir accessibility during the galvanic replacement step and electronic continuity. The optimized IrO_x/Ir-Ni/a-TiO₂ electrode achieved excellent OER performance (η = 344 mV @ 10 mA cm⁻²; 1.68 mA μg_Ir⁻¹ @ η = 300 mV) at an ultra-low Ir loading of 2.15 μg_Ir cm⁻² and demonstrated good short-term stability, with only a 20 mV potential increase over 4 h of continuous operation at 5.5 mA cm⁻². Overall, this strategy offers a scalable pathway for producing efficient OER electrodes with minimal noble metal loading. Full article

Reverse electrodialysis (RED) enables the efficient conversion of the chemical potential difference between seawater and freshwater into electricity while simultaneously facilitating hydrogen production for integrated energy utilization. Nevertheless, the widespread deployment of RED remains constrained by the reliance on ruthenium–iridium-coated electrodes, which are expensive and resource-limited. This study proposes the adoption of titanium-based redox electrodes as a replacement for traditional precious metal electrodes and employs a novel spike structure to accelerate hydrogen bubble detachment. The electrochemical performance of titanium electrodes in an RED hydrogen production system was systematically evaluated experimentally. The influences of several parameters on the RED system performance were systematically examined under these operating conditions, including the ruthenium–iridium catalytic layer, operating temperature (15 to 45 °C), electrode rinse solution (ERS) concentration (0.1 to 0.7 M), and flow rate (50 to 130 mL·min⁻¹). Experimental results demonstrate that optimized titanium redox electrodes maintain high electrocatalytic activity while significantly reducing system costs. Under optimal conditions, the hydrogen yield of the Ti redox electrode reached 89.7% of that achieved with the mesh titanium plate coated oxide iridium and oxide ruthenium as electrodes, while the electrode cost was reduced by more than 60%. This is also one of the cost-cutting solutions adopted by RED for its development. Full article

The increasing impact of global warming is predominantly driven by the extensive use of fossil fuels, which release significant amounts of greenhouse gases into the atmosphere. This has led to a critical need for alternative, sustainable energy sources that can mitigate environmental impacts. Photovoltaic technology has emerged as a promising solution by harnessing renewable energy from the sun, providing a clean and inexhaustible power source. Perovskite solar cells (PSCs) are a class of hybrid organic–inorganic solar cells that have recently attracted significant scientific attention due to their low cost, relatively high efficiency, low–temperature processing routes, and longer carrier lifetimes. These characteristics make them a viable alternative to traditional fossil fuels, reducing the carbon footprint and contributing to the fight against global warming. In this study, the SCAPS–1D numerical simulator was used in the computational analysis of a PSC device with the configuration FTO/ETL/BaZr(S_0.6Se_0.4)₃/HTL/Ir. Different hole transport layer (HTL) and electron transport layer (ETL) material were proposed and tested. The HTL materials included copper (I) oxide (Cu₂O), 2,2′,7,7′–Tetrakis(N,N–di–p–methoxyphenylamine)9,9′–spirobifluorene (spiro–OMETAD), and poly(3–hexylthiophene) (P₃HT), while the ETLs included cadmium suphide (CdS), zinc oxide (ZnO), and [6,6]–phenyl–C₆₁–butyric acid methyl ester (PCBM). Finally, BaZr(S_0.6Se_0.4)₃ was proposed as an absorber, and a fluorine–doped tin oxide glass substrate (FTO) was proposed as an anode. The metal back contact used was iridium. Photovoltaic parameters such as short circuit density (I_sc), open circuit voltage (V_oc), fill factor (FF), and power conversion efficiency (PCE) were used to evaluate the performance of the device. The initial simulated primary device with the configuration FTO/CdS/BaZr(S_0.6Se_0.4)₃/spiro–OMETAD/Ir gave a PCE of 5.75%. Upon testing different HTL materials, the best HTL was found to be Cu₂O, and the PCE improved to 9.91%. Thereafter, different ETLs were also inserted and tested, and the best ETL was established to be ZnO, with a PCE of 10.10%. Ultimately an optimized device with a configuration of FTO/ZnO/BaZr(S_0.6Se_0.4)₃/Cu₂O/Ir was achieved. The other photovoltaic parameters for the optimized device were as follows: FF = 31.93%, J_sc = 14.51 mA cm⁻², and V_oc = 2.18 V. The results of this study will promote the use of environmentally benign BaZr(S_0.6Se_0.4)₃–based absorber materials in PSCs for improved performance and commercialization. Full article

Host engineering is one of the most efficient approaches to maximizing the electroluminescent performance of organic light-emitting devices. Herein, two carbazole-based N,N′-Dicarbazolyl-4,4′-biphenyl (CBP) derivatives, (9-(4′-(9H-carbazol-9-yl)-[1,1′-biphenyl]-4-yl)-3-(3-(1-phenyl-1H-benzo[d]imidazol-2-yl)phenyl)-9H-carbazole (CBPmBI), and (9-(4′-(9H-carbazol-9-yl)-[1,1′-biphenyl]-4-yl)-9H-carbazol-3-yl)diphenylphosphine oxide (CBPPO), were designed as bipolar hosts for blue phosphorescent devices. By introducing the electron-withdrawing groups to the backbone of CBP, the bipolar hosts exhibited high triplet energy, enhanced thermal stability, and balanced charge transport. The device constructed with the blue guest emitter bis[2-(4,6-difluorophenyl) pyridinato-C2,N]iridium (III) (FIrpic) showed the excellent electroluminescence performance. For instance, the CBPPO-based devices achieved a maximum current efficiency of 28.0 cd/A, a power efficiency of 25.8 lm/W, and an external quantum efficiency of 14.4%. Notably, the external quantum efficiency retained at14.1% under the brightness of 5000 cd/m², featuring the negligible efficiency roll-off. Full article

This review paper presents a comprehensive literature analysis that elucidates the global engagement of research teams in addressing the important problem of finding effective oncology drugs based on the following platinum group metal ions: ruthenium, rhodium and iridium. The necessity to search for new drugs can be attributed, in part, to the predominance of platinum-based chemotherapeutics in clinical practice. However, these drugs face limitations in their clinical application due to their inherent toxicity and the development of resistance by cancer cells. A distinctive attribute of these metal compounds is the formation of diamagnetic stable complexes on +II (Ru) and +III (Rh, Ir) oxidation degrees with a d⁶ electron configuration, a coordination number of six and an octahedral or pseudo-octahedral structure. In this paper we have systematised the findings presented in the literature by classifying the most significant categories of ruthenium, rhodium and iridium compounds, namely piano-stool-type arenes, polypyridine and cyclometalated complexes, dimers and multinuclear complexes. Additionally, the most crucial research challenges connected with metal complexes that have been addressed by scientists have been presented: (i) the application of prodrugs in cancer therapy; (ii) the deployment of complexes as sensitizers in PDT and PACT; (iii) the exploration of complexes as inhibitors of enzymes and biocatalysts; and (iv) the investigation of multiple-target complexes. Furthermore, the objective was to emphasise the accomplishments in this domain in recent years by identifying compounds that have entered the clinical trial phase. Full article

This review is devoted to research in the field of photodynamic and photothermal therapies for malignant tumors. Special attention in the review is given to photosensitizers based on compounds with a tetrapyrrole ring system, their metal complexes, BODIPY and aza-BODIPY derivatives, squaraines, and photoactivators based on metal complexes with other ligands such as phenanthroline and its derivatives, metronidazole, pyridine, and imidazole derivatives. Additionally, the review considers nanosized carriers for photosensitizers, such as organic and inorganic nanoparticles, liposomes, and extracellular vesicles. This review also discusses the dark toxicity and phototoxicity of these compounds and the processes of free oxygen radical formation, mitochondrial dysfunction, and induction of apoptosis in cancer cells. It has been established that nanoscale delivery systems are more promising for use in photodynamic and photothermal therapy compared to molecular photosensitizers. This is due to their improved solubility in physiological environments, selective accumulation in tumors, prolonged photoactivity, and lower therapeutic dose, which allows for the minimization of the side effects of treatment. Among the molecular photosensitizers under consideration, amphiphilic tetrapyrroles appear to be the most promising. Specifically, tetrapyrrole complexes of indium (III) and iridium (III) with non-porphyrin ligands exhibit favorable photophysical and biological characteristics. The review also indicates that photosensitizers tend to localize in the mitochondria of tumor cells, contributing to oxidative stress and apoptosis activation. This review may be of interest to biochemists and oncologists. Full article

Alzheimer’s disease (AD) instantly requires affordable diagnostic tools for targeting the responsible molecular biomarkers. In this review, we briefly discussed the overview of the AD population, performance of different analytical techniques and nanoparticles/composites, molecular biomarkers, and the interest of countries towards the detection of AD biomarkers during 2012–2025. The desired result was attained by lateral flow assay, surface-enhanced Raman scattering, and colorimetric sensor techniques with nanoparticles of magnetic, gold, and carbon-containing silver, and iridium oxide nanoparticles, upon biomarkers of dopamine, amyloid beta41, and Apolipoprotein E, individually. Additionally, the outstanding performance of nanoparticles including gold nanoparticles, carbon-containing nanoparticles, and manganese dioxide with their particle size of 5.7 nm, 35 nm, 37.3 nm, 120 nm, and 220 nm, respectively, has been discussed. Moreover, the percentages of AD-related biomarkers including amyloid beta42 having research articles of 21.2%, amyloid beta1-42 12.1%, amyloid beta oligomer 12.1%, phosphorylated Tau detection 12.1%, amyloid beta1-40 9.09%, Dopamine 9.09%, amyloid beta40 9.17%, apolipoprotein 6.06%, etc., have also been included. Additionally, LOD comparison with respect to applied analytical techniques, investigated through a timeline and electrochemical sensor, was found most suitable. Finally, a portable molecular diagnostic device to combine amyloid beta1-42, amyloid beta1-40, and phosphorylated Tau detection in non-invasive bodily fluid was proposed for the future and clinical diagnosis. Full article

As part of the GreenRAIM activity of the European Space Agency (ESA), an extensive test campaign involving various monopropellants was undertaken. In this work, design and test results of an additively manufactured 1-Newton monopropellant thruster are shown. The detailed design of the thruster and the experimental setup are presented. The first part of the test campaign was conducted with 98 wt.% hydrogen peroxide as the propellant and a commercially available Pt/Al₂O₃ catalyst. The second part was carried out with the same thruster but using nitrous oxide as the propellant and an iridium-based catalyst. The test data acquired was used to validate a comprehensive, generic model for monopropellant thrusters within the simulation software EcosimPro/ESPSS v3.7, which was developed within the activity. Full article

In the water splitting process for sustainable hydrogen production, the oxygen evolution reaction (OER) stands as one of the pivotal half-reactions. Nevertheless, the sluggish four-electron transfer process inherent to OER has emerged as a kinetic bottleneck that impedes water electrolysis. To address this challenge, researchers have been devoting substantial efforts to developing high-performance OER electrocatalysts. Currently, iridium (Ir)-based or ruthenium (Ru)-based oxides are widely acknowledged as benchmark catalysts for OER. However, their scarcity and exorbitant cost render large-scale applications impractical. In recent years, transition metal carbides have garnered extensive attention in the realm of OER electrocatalysts, exhibiting tremendous application prospects owing to their advantages of low cost, high catalytic activity, and excellent stability. This review briefly introduces the fundamental characteristics and synthesis methodologies of transition metal carbides, summarizes the recent research advances in their application as OER catalysts, elaborates on the modification strategies and catalytic mechanisms of transition metal carbide nanomaterials, and finally discusses the challenges confronted by these metal carbides as well as the future research directions. Full article

This study presents the in vitro and preliminary ex vivo development of a novel microneedle-based pH sensor for continuous intrapartum fetal monitoring. The objective was to evaluate the feasibility of using microneedle sensors to monitor fetal pH during labour and to develop a proof-of-principle microneedle pH sensor that meets clinical requirements such as high sensitivity to small pH changes (0.05 units) within a relevant range (6.50–7.45), minimal tissue disruption, and a compact design suitable for transcervical placement on the fetal scalp (<40 mm diameter). Platinum microneedles were passivated with ArCare medical adhesive and coated with iridium oxide via electrodeposition. Sensitivity was tested in phosphate buffered saline (PBS) and artificial interstitial fluid (ISF), using both external Ag/AgCl and internal platinum pseudo-reference electrodes. In PBS, the sensor exhibited linear responses in increments of 0.05 pH units over the clinically relevant range (6.5–7.45), with slopes of −60.49 mV/pH (R² = 0.946, accuracy = 97.65%) and −63.2 mV/pH (R² = 0.910, accuracy = 93.70%) in the external and internal configurations, respectively. In ISF, a slope of −25.5 mV/pH (R² = 0.979) was obtained. Ex vivo testing on human skin confirmed successful microneedle penetration without visible iridium oxide transfer or tissue damage, as indicated by methylene blue staining. These findings support the potential for continuous minimally invasive fetal pH monitoring during labour, representing a significant step toward more objective and specific intrapartum assessment. Full article

Industrial catalysts are accelerating the global transition toward renewable energy, serving as enablers for innovative technologies that enhance efficiency, lower costs, and improve environmental sustainability. This review explores the pivotal roles of industrial catalysts in hydrogen production, biofuel generation, and biomass conversion, highlighting their transformative impact on renewable energy systems. Precious-metal-based electrocatalysts such as ruthenium (Ru), iridium (Ir), and platinum (Pt) demonstrate high efficiency but face challenges due to their cost and stability. Alternatives like nickel-cobalt oxide (NiCo₂O₄) and Ti₃C₂ MXene materials show promise in addressing these limitations, enabling cost-effective and scalable hydrogen production. Additionally, nickel-based catalysts supported on alumina optimize SMR, reducing coke formation and improving efficiency. In biofuel production, heterogeneous catalysts play a crucial role in converting biomass into valuable fuels. Co-based bimetallic catalysts enhance hydrodeoxygenation (HDO) processes, improving the yield of biofuels like dimethylfuran (DMF) and γ-valerolactone (GVL). Innovative materials such as biochar, red mud, and metal–organic frameworks (MOFs) facilitate sustainable waste-to-fuel conversion and biodiesel production, offering environmental and economic benefits. Power-to-X technologies, which convert renewable electricity into chemical energy carriers like hydrogen and synthetic fuels, rely on advanced catalysts to improve reaction rates, selectivity, and energy efficiency. Innovations in non-precious metal catalysts, nanostructured materials, and defect-engineered catalysts provide solutions for sustainable energy systems. These advancements promise to enhance efficiency, reduce environmental footprints, and ensure the viability of renewable energy technologies. Full article

In this work, we have used both plain titania nanotubes, TNTs, and their reduced black analogues, bTNTs, that bear metallic conductivity (prepared by solid state reaction of TNTs with CaH₂ at 500 °C for 2 h), as catalyst supports for the oxygen evolution reaction (OER). Ir was subsequently been deposited on them by the galvanic replacement of electrodeposited Ni by Ir(IV) chloro-complexes; this was followed by Ir electrochemical anodization to IrO₂. By carrying out the preparation of the TNTs in either two or one anodization steps, we were able to produce close-packed or open-structure nanotubes, respectively. In the former case, larger than 100 nm Ir aggregates were finally formed on the top face of the nanotubes (leading to partial or full surface coverage); in the latter case, Ir nanoparticles smaller than 100 nm were obtained, with some of them located inside the pores of the nanotubes, which retained a porous surface structure. The electrocatalytic activity of IrO₂ supported on open-structure bTNTs towards OER is superior to that supported on close-packed bTNTs and TNTs, and its performance is comparable or better than that of similar electrodes reported in the literature (overpotential of η = 240 mV at 10 mA cm⁻²; current density of 70 mA cm⁻² and mass specific current density of 258 mA mg_Ir⁻¹ at η = 300 mV). Furthermore, these electrodes demonstrated good medium-term stability, maintaining stable performance for 72 h at 10 mA cm⁻² in acid. Full article

This work investigates photoactive inorganic powders (SiO₂, IrSiO₂, and IrO₂/IrSiO₂) and their derivatives modified with metallated porphyrin, focusing on their ability to generate reactive oxygen species (ROS) under visible light exposure. The core material, SiO₂, exhibits a tubular morphology and a high density of optically active defects. Modifiers such as metallic and iridium oxide nanoparticles, along with porphyrin, are employed to enhance light absorption and the generation of singlet oxygen (¹O₂) for potential biomedical applications. The time-dependent photogeneration of singlet oxygen is monitored using a Singlet Oxygen Green Sensor (SOSG), and its reactivity is evaluated in relation to DL α-Tocopherol through a spectrofluorimetric analysis. The photoactive materials, both before and after porphyrin modification, are characterized using Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), X-ray Diffraction (XRD), X-ray Fluorescence (XRF), UV–Vis Spectroscopy, X-ray Photoelectron Spectroscopy (XPS), N₂ adsorption–desorption measurements, and zeta potential measurements. Full article

The precise control of thermal–kinetic parameters governs epitaxial perfection in functional oxide heterostructures. Herein, using Iridium/MgO(100) as a model system, the traditional “low-speed/high-temperature” paradigm is revolutionized through the combination of ab initio calculations, multiscale simulations, and subsequent deposition experiments. First-principles modeling reveals the mechanisms of Volmer–Weber (VW, island growth mode) nucleation at low coverage and Stranski–Krastanov (SK, layer-plus-island growth) transitions driven by interface metallization, stress release, and energy reduction, which facilitates coherent monolayer formation by lowering the energy barrier by ~34%. Molecular dynamics simulations demonstrate that the strategic co-optimization of substrate temperature (T_sub) and deposition rate (V_dep) induces an abrupt cliff-like drop in mosaic spread. Experimental validations confirm that this T-V synergy achieves unprecedented interfacial coherence, whereby AFM roughness reaches 0.34 nm (RMS) and the XRC-FWHM of 0.13° approaches single-crystal benchmarks. Notably, our novel “accelerated heteroepitaxy” protocol reduces growth time without compromising quality, addressing the efficiency–quality paradox in industrial-scale diamond substrate fabrication. These findings establish universal thermal–kinetic design principles applicable to refractory metal/oxide heterostructures for next-generation quantum sensors and high-power electronic devices. Full article