Search Results (50)

The Hulukou-Xiangbiling section of the Jinsha River is located in a typical high-mountain gorge area characterized by a complex geological environment, rendering it highly susceptible to landslide disasters. To reveal the deformation mechanisms of typical landslides in this region under hydrological effects, this study employed the Small Baseline Subset InSAR (SBAS-InSAR) technique to process multi-track Sentinel-1 SAR images acquired between 2021 and 2024. Long-term deformation time series were extracted for the Xiaxiaomidi and Chenjiatian landslides. On this basis, a systematic multi-scale coupling analysis of the deformation characteristics was conducted using trend-cycle decomposition, Continuous Wavelet Transform (CWT), Cross Wavelet Transform (XWT), and Wavelet Coherence (WTC). The results indicate that although the two landslides are located in the same river section, their deformation mechanisms and hydrological response patterns differ significantly. The deformation of the Xiaomidi landslide is mainly concentrated in the lower part of the slope, exhibiting a characteristic of continuous acceleration. The analysis demonstrates that the evolution of this landslide is primarily controlled by hydrodynamic processes such as toe unloading, water body erosion, and water level fluctuations. In contrast, the Chenjiatian landslide displays a distinct dominant cycle of 365 days, manifesting as a composite mode of long-term creep superimposed with seasonal acceleration. Its deformation shows a high correlation with rainfall (correlation coefficient > 0.9), with a lag effect of approximately 1 to 2 months. This reflects the dominant role of rainfall infiltration and pore pressure transfer in the landslide dynamics. Full article

Interferometric Synthetic Aperture Radar (InSAR) is an advanced imaging geodesy technique for detecting and characterizing surface deformation with high spatial resolution and broad spatial coverage. However, as an inherently post-event observation method, InSAR suffers from limited capability for near-real-time and short-term updates of deformation time series. In this paper, we proposed a data-driven adaptive framework for deformation prediction based on a hybrid deep learning method to accurately predict the InSAR-derived deformation time series and take the Xi’erguazi−Mawo landslide complex (XMLC) as a case study. The InSAR-derived time series was initially decomposed into trend and periodic components with a two-step decomposition process, which were thereafter modeled separately to enhance the characterization of motion kinematics and prediction accuracy. After retrieving the observations from the multi-temporal InSAR method, two-step signal decomposition was then performed using the Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) and Variational Mode Decomposition (VMD). The decomposed trend and periodic components were further evaluated using statistical hypothesis testing to verify their significance and reliability. Compared with the single-decomposition model, the further decomposition leads to an overall improvement in prediction accuracy, i.e., the Mean Absolute Errors (MAEs) and the Root Mean Square Errors (RMSEs) are reduced by 40–49% and 36–42%, respectively. Subsequently, the Radial Basis Function (RBF) neural network and the proposed CNN-BiLSTM-SelfAttention (CBS) models were constructed to predict the trend and periodic variations, respectively. The CNN and self-attention help to extract local features in time series and strengthen the ability to capture global dependencies and key fluctuation patterns. Compared with the single network model in prediction, the MAEs and RMSEs are reduced by 22–57% and 4–33%, respectively. Finally, the two predicted components were integrated to generate the fused deformation prediction results. Ablation experiments and comparative experiments show that the proposed method has superior ability. Through rapid and accurate prediction of InSAR-derived deformation time series, this research could contribute to the early-warning systems of slope instabilities. Full article

The Linfen–Yuncheng Basin is located on the southern edge of the Fenwei Fault Zone, influenced by intense tectonic activity, thick Quaternary sedimentation, and anthropogenic disturbance, it exhibits prominent characteristics of ground subsidence and fissure development. However, uncertainties still exist regarding the primary controlling factors of subsidence. This study employs multi-temporal InSAR data, combined with small baseline subset (SBAS–InSAR) technology to invert the high-precision ground line of sight deformation fields, and conducts time-series decomposition analysis using the Seasonal Trend Decomposition (STL) method. The results show that from 2017 to 2025, subsidence was mainly concentrated in the central and southern regions of the basin, with a maximum cumulative subsidence exceeding 200 mm and an average annual subsidence rate of −40 mm/year. Its spatial distribution is highly consistent with major structural zones such as the Zhongtiao Mountain Front Fault and the Linyi Fault, indicating that fault activity exerts a significant controlling effect on subsidence patterns. Groundwater level fluctuations are positively correlated with overall ground subsidence, and the response rate of different monitoring points is constrained by differences in aquifer depth and permeability. Groundwater aquifer points exhibit rapid and reversible subsidence response, while confined aquifer points are affected by low-permeability or compressible layers, showing a significant lag effect. The research results indicate that time-series analysis based on InSAR can not only effectively reveal the subsidence evolution process at different scales, but also provide a scientific basis for groundwater resource regulation, geological disaster prevention and control, and sustainable regional land utilization. Full article

Urban land subsidence poses a significant threat in rapidly urbanizing regions, threatening infrastructure integrity and sustainable development. This study focuses on Mandalay, Myanmar, and presents a novel clustering framework—Dynamic Time Warping and Trend-based Longest Common Subsequence with Agglomerative Hierarchical Clustering (DTLCS-AHC)—to classify spatiotemporal deformation patterns from Small Baseline Subset (SBAS) Interferometric Synthetic Aperture Radar (InSAR) time series derived from Sentinel-1A imagery covering January 2022 to March 2025. The method identifies four characteristic deformation regimes: stable uplift, stable subsidence, primary subsidence, and secondary subsidence. Time–frequency analysis employing Empirical Mode Decomposition (EMD) and Discrete Fourier Transform (DFT) reveals seasonal oscillations in stable areas. Notably, a transition from subsidence to uplift was detected in specific areas approximately seven months prior to the Mw 7.7 earthquake, but causal relationships require further validation. This study further establishes correlations between subsidence and both urban expansion and rainfall patterns. A physically informed conceptual model is developed through multi-source data integration, and cross-city validation in Yangon confirms the robustness and generalizability of the approach. This research provides a scalable technical framework for deformation monitoring and risk assessment in tropical, data-scarce urban environments. Full article

Classical instrumental technologies still remain important among the geodetic methods of dam monitoring, but periodic observations are often insufficient for timely detection of hazardous deformations. Therefore, the integration of continuous and remote sensing technologies into a multi-level system of observation improves the assessment of a structural condition. This research work evaluates the integrated approach that combines the GNSS data, robotic total station measurements, and satellite radar data processed by the PSInSAR technique for detecting the cyclic thermal deformations of the Dniester HPP concrete dam. The dataset includes 185 ascending and 184 descending Sentinel-1A SAR images (2019–2025, 12-day repeat cycle). PSInSAR processing was performed using StaMPS, with validation through comparison of InSAR-derived vertical displacements and GNSS data from the stationary monitoring system of the dam. The GNSS and InSAR time series have revealed consistent seasonal patterns and a common long-term trend. Harmonic components with amplitudes of 4–5 mm, peaking in late summer and declining in winter, confirm the dominant influence of thermal processes. In order to reduce noise, Fourier-based filtering and approximation were applied, thus ensuring balance between accuracy and data retention. The combined use of GNSS, robotic total station, and InSAR has increased the density of reliable control points and improved the thermal deformation model. Maximum vertical displacements of 6–13 mm were observed on the horizontal sections most exposed to solar radiation. Full article

This study establishes an integrated “Detection–Decomposition–Interpretation” framework for geohazard assessment, with Tangshan City serving as a representative case. Using Sentinel-1 SAR images from 2020 to 2024, regional surface deformation was derived via the Small Baseline Subset InSAR (SBAS-InSAR) technique. Six categories of geohazards were systematically identified and classified: landslides, open-pit slope deformation, mining-induced subsidence, spoil heap deformation, tailings pond deformation, and reclamation settlement. A total of 115 potential hazards were spatially cataloged, revealing distinct zonation characteristics: the northern mountainous area is predominantly affected by landslides and open-pit mining hazards; the central plain exhibits concentrated mining subsidence; and the southern coastal zone is marked by large-scale reclamation settlement. For the southern reclamation area, where settlement mechanisms are complex, the Independent Component Analysis (ICA) method was applied to successfully decompose the deformation signals into three independent components: IC1, representing the dominant long-term irreversible settlement driven by fill consolidation, building loads, and groundwater extraction; IC2, reflecting seasonal deformation coupled with groundwater level fluctuations; and IC3, comprising residual noise. Time series analysis further reveals the coexistence of “decelerating” and “accelerating” settlement trends across different zones, indicative of their respective evolutionary stages—from decaying to actively progressing settlement. This study not only offers a scientific basis for geohazard prevention and control in Tangshan, but also provides a transferable framework for analyzing hazard mechanisms in other complex geographic settings. Full article

Interferometric Synthetic Aperture Radar (InSAR) technology is crucial for large-scale land subsidence analysis in cultivated areas within hilly and mountainous regions. Accurate prediction of this subsidence is of significant importance for agricultural resource management and planning. Addressing the limitations of existing subsidence prediction methods in terms of accuracy and model selection, this paper proposes a deep neural network prediction model based on Variational Mode Decomposition (VMD) and the Snake Optimizer (SO), termed VMD-SO-CNN-LSTM-MATT. VMD decomposes complex subsidence signals into stable intrinsic components, improving input data quality. The SO algorithm is introduced to globally optimize model parameters, preventing local optima and enhancing prediction accuracy. This model utilizes time–series subsidence data extracted via the SBAS-InSAR technique as input. Initially, the original sequence is decomposed into multiple intrinsic mode functions (IMFs) using VMD. Subsequently, a CNN-LSTM network incorporating a Multi-Head Attention mechanism (MATT) is employed to model and predict each component. Concurrently, the SO algorithm performs global optimization of the model hyperparameters. Experimental results demonstrate that the proposed model significantly outperforms comparative models (traditional Long Short-Term Memory (LSTM) neural network, VMD-CNN-LSTM-MATT, and Sparrow Search Algorithm (SSA)-optimized CNN-LSTM) across key metrics: Mean Absolute Error (MAE), Root Mean Square Error (RMSE), and Mean Absolute Percentage Error (MAPE). Specifically, the reductions achieved are minimum improvements of 29.85% for MAE, 8.42% for RMSE, and 33.69% for MAPE. This model effectively enhances the prediction accuracy of land subsidence in cultivated hilly and mountainous areas, validating its high reliability and practicality for subsidence monitoring and prediction tasks. Full article

Understanding the time-lagged response of land subsidence to groundwater level fluctuations and subsurface strain variations is crucial for uncovering its underlying mechanisms and enhancing disaster early warning capabilities. This study focuses on Dangshan County, Anhui Province, China, and systematically analyzes the spatio-temporal evolution of land subsidence from 2018 to 2024. A total of 207 Sentinel-1 SAR images were first processed using the Small Baseline Subset Interferometric Synthetic Aperture Radar (SBAS-InSAR) technique to generate high-resolution surface deformation time series. Subsequently, the seasonal-trend decomposition using the LOESS (STL) model was applied to extract annual cyclic deformation components from the InSAR-derived time series. To quantitatively assess the delayed response of land subsidence to groundwater level changes and subsurface strain evolution, time-lagged cross-correlation (TLCC) analysis was performed between surface deformation and both groundwater level data and distributed fiber-optic strain measurements within the 5–50 m depth interval. The strain data was collected using a borehole-based automated distributed fiber-optic sensing system. The results indicate that land subsidence is primarily concentrated in the urban core, with annual cyclic amplitudes ranging from 10 to 18 mm and peak values reaching 22 mm. The timing of surface rebound shows spatial variability, typically occurring in mid-February in residential areas and mid-May in agricultural zones. The analysis reveals that surface deformation lags behind groundwater fluctuations by approximately 2 to 3 months, depending on local hydrogeological conditions, while subsurface strain changes generally lead surface subsidence by about 3 months. These findings demonstrate the strong predictive potential of distributed fiber-optic sensing in capturing precursory deformation signals and underscore the importance of integrating InSAR, hydrological, and geotechnical data for advancing the understanding of subsidence mechanisms and improving monitoring and mitigation efforts. Full article

Landslides are major geological hazards that pose serious threats to life and property, particularly in the high-mountain canyon regions of Sichuan, Yunnan, and southeastern Tibet. Displacement prediction plays a critical role in disaster prevention and mitigation. In recent years, machine learning methods based on InSAR data have achieved significant breakthroughs in landslide forecasting. However, models relying solely on a single data-driven approach may fail to fully capture the complex physical mechanisms of landslides, affecting both the reliability and interpretability of predictions. Therefore, developing effective landslide displacement prediction models is essential. The paper introduces a model designed to forecast the landslide displacement using Variational Mode Decomposition (VMD), Bayesian Optimization (BO), and Gated Recurrent Units (GRU). First, wavelet analysis is employed to identify the trend component in the landslide displacement data. Then, the total displacement is separated into its trend and periodic components through the application of the Variational Mode Decomposition (VMD) technique. A wide range of influencing factors is introduced, and Utilizing Grey Relational Analysis, we evaluate the interplay between contributing factors and all components of landslide displacement, both trend and periodic. Prediction models incorporate the trend and periodic terms, alongside the contributing factors, as input variables. The overall displacement is computed by summing the trend and periodic terms series using the Mianshawan landslide as a case study, experimental studies were conducted with landslide data from January 2019 to December 2022 with a Root Mean Squared Error (RMSE) of 0.402, Mean Absolute Error (MAE) of 0.187, Mean Absolute Percentage Error (MAPE) of 2.05%, and a coefficient of determination (R²) of 0.998. These findings indicate that, compared to traditional methods, our model delivers remarkable improvements in performance, offering higher prediction accuracy and greater reliability in the landslide forecasting task for the Mianshawan area. Full article

Accurately monitoring forest canopy height is crucial for sustainable forest management, particularly in southeastern North Carolina, USA, where dense forests and limited accessibility pose substantial challenges. This study presents an explainable machine learning framework that integrates sparse GEDI LiDAR samples with multi-sensor remote sensing data to improve both the accuracy and interpretability of forest canopy height estimation. This framework incorporates multitemporal optical observations from Sentinel-2; C-band backscatter and InSAR coherence from Sentinel-1; quad-polarization L-Band backscatter and polarimetric decompositions from the Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR); texture features from the National Agriculture Imagery Program (NAIP) aerial photography; and topographic data derived from an airborne LiDAR-based digital elevation model. We evaluated four machine learning algorithms, K-nearest neighbors (KNN), random forest (RF), support vector machine (SVM), and eXtreme gradient boosting (XGB), and found consistent accuracy across all models. Our evaluation highlights our method’s robustness, evidenced by closely matched R² and RMSE values across models: KNN (R² of 0.496, RMSE of 5.13 m), RF (R² of 0.510, RMSE of 5.06 m), SVM (R² of 0.544, RMSE of 4.88 m), and XGB (R² of 0.548, RMSE of 4.85 m). The integration of comprehensive feature sets, as opposed to subsets, yielded better results, underscoring the value of using multisource remotely sensed data. Crucially, SHapley Additive exPlanations (SHAP) revealed the multi-seasonal red-edge spectral bands of Sentinel-2 as dominant predictors across models, while volume scattering from UAVSAR emerged as a key driver in tree-based algorithms. This study underscores the complementary nature of multi-sensor data and highlights the interpretability of our models. By offering spatially continuous, high-quality canopy height estimates, this cost-effective, data-driven approach advances large-scale forest management and environmental monitoring, paving the way for improved decision-making and conservation strategies. Full article

Eigenvalue decomposition (EVD) of covariance matrices or coherence matrices has been employed to suppress noise in phase information, and this approach has shown some effectiveness in data processing. However, while this method helps attenuate noisy phase components, it also tends to significantly degrade the true deformation phase information, which can be detrimental in certain applications. To address this issue, this paper proposes an optimal eigenvalue decomposition phase optimization method, incorporating a spectral radius-constrained covariance matrix construction, named SREVD. This method constructs a covariance matrix using spectral radius constraints and then selects optimal eigenvectors from the covariance matrix for weighted combination, yielding the final optimized phase. The advantages of this approach (1) include the use of spectral radius constraints to obtain a stable covariance matrix, and (2) rather than using the eigenvector associated with the maximum eigenvalue for phase optimization, the interferometric phase is reconstructed by a weighted combination of eigenvectors selected through eigenvalue-based optimization. Experimental analysis conducted in a mining area in Datong, Shanxi Province, China, yields the following conclusions: compared to the original interferogram and the traditional EVD-optimized interferogram, the proposed SREVD method demonstrates superior noise suppression. After optimization with SREVD, the density of monitoring points has been significantly improved. The final number of selected points is 9.06 times that of StaMPS and 1.3 times that of EVD optimization, which can better reflect the topographic changes in the study area. Full article

Land subsidence (LS) is a geological hazard driven by both natural conditions and human activities. Traditional LS time-series prediction models often struggle to accurately capture nonlinear data characteristics, leading to suboptimal predictions. To address this issue, this paper introduces a multi-component temporal convolutional gate recurrent unit (MC-TCGRU) model, which integrates a fully adaptive noise-ensemble empirical-mode decomposition algorithm with a deep neural network to account for the complexity of time-series data. The model was validated using typical InSAR subsidence data from Kunming, analyzing the impact of each component on the prediction performance. A comparative analysis with the TCGRU model and models based on seasonal-trend decomposition using LOESS (STL) and empirical-mode decomposition (EMD) revealed that the MC-TCGRU model significantly enhanced the prediction accuracy by reducing the complexity of the original data. The model achieved R² values of 0.90, 0.93, 0.51, 0.93, and 0.96 across five points, outperforming the compared models. Full article

Many debris-covered glaciers are widely distributed on the Qinghai–Tibet Plateau. Glaciers are important freshwater resources and cause disasters such as glacier collapse and landslides. Therefore, it is of great significance to monitor the movement characteristics of large active glaciers and analyze the process of mass migration, which may cause serious threats and damage to roads and people living in surrounding areas. In this study, we chose a glacier with strong activity in Lulang County, Tibet, as the study area. The complete 4-year time series deformation of the glacier was estimated by using an improved small-baseline subset InSAR (SBAS-InSAR) technique based on the ascending and descending Sentinel-1 datasets. Then, the three-dimensional time series deformation field of the glacier was obtained by using the 3D decomposition technique. Furthermore, the three-dimensional movement of the glacier and its material migration process were analyzed. The results showed that the velocities of the Lulang glacier in horizontal and vertical directions were up to 8.0 m/year and 0.45 m/year, and these were basically consistent with the movement rate calculated from the historical optical images. Debris on both sides of the slope accumulated in the channel after slipping, and the material loss of the three provenances reached 6–9 × 10³ m³/year, while the volume of the glacier also decreased by about 76 × 10³ m³/year due to snow melting and evaporation. The correlation between the precipitation, temperature, and surface velocity suggests that glacier velocity has a clear association with them, and the activity of glaciers is linked to climate change. Therefore, in the context of global warming, the glacier movement speed will gradually increase with the annual increase in temperature, resulting in debris flow disasters in the future summer high-temperature period. Full article

The ionospheric effects in repeat-pass SAR interferometry (InSAR) have become a rising concern with the increasing interest in low-frequency SAR. The ionosphere will introduce serious phase errors in the interferogram, which should be properly corrected. In this paper, the influence of the wavenumber shift on the Range Split-Spectrum (RSS) method is analyzed quantitatively. It is shown that the split-spectrum processing deteriorates the coherence of the sub-band interferogram and then greatly reduces the estimation accuracy. The RSS method combined with common band filtering (CBF) can improve the coherence of sub-band interferograms and estimation accuracy, but the estimation is biased due to the RSS model mismatch. To address the problem, a modified truncated singular value decomposition (MTSVD) based multi-sub-band RSS method is proposed in this paper. The proposed method divides the range common spectrum into multiple sub-bands to jointly estimate the ionospheric phase. The performance of the proposed method is analyzed and validated based on simulation experiments. The results show that the proposed method has stronger robustness and higher accuracy. Full article

The dust originating from the extinct lake of the Aral Sea poses a considerable threat to the surrounding communities and ecosystems. The accurate location of these wind erosion areas is an essential prerequisite for controlling sand and dust activity. However, few relevant indicators reported in this current study can accurately describe and measure wind erosion intensity. A novel wind erosion intensity (WEI) of a pixel resolution unit was defined in this paper based on deformation due to the wind erosion in this pixel resolution unit. We also derived the relationship between WEI and soil InSAR temporal decorrelation (ITD). ITD is usually caused by the surface change over time, which is very suitable for describing wind erosion. However, within a pixel resolution unit, the ITD signal usually includes soil and vegetation contributions, and extant studies concerning this issue are considerably limited. Therefore, we proposed an ITD decomposition model (ITDDM) to decompose the ITD signal of a pixel resolution unit. The least-square method (LSM) based on singular value decomposition (SVD) is used to estimate the ITD of soil (SITD) within a pixel resolution unit. We verified the results qualitatively by the landscape photos, which can reflect the actual conditions of the soil. At last, the WEI of the Aral Sea from 23 June 2020, to 5 July 2020 was mapped. The results confirmed that (1) based on the ITDDM model, the SITD can be accurately estimated by the LSM; (2) the Aral Sea is experiencing severe wind erosion; and (3) the middle, northeast, and southeast bare areas of the South Aral Sea are where salt dust storms may occur. Full article