Search Results (1,204)

In remote alpaca breeding regions, access to advanced sperm analysis laboratories is limited. This study validates a practical cytometric method for evaluating sperm viability and acrosomal integrity in epididymal alpaca sperm using early fluorochrome staining, formaldehyde fixation, and intermediate storage. Thirty-two testes were transported at 5 °C, and spermatozoa were collected from the cauda epididymis. After morphometric screening, 26 samples were included. Aliquots were stained with Zombie Green (viability) and FITC–PSA (acrosomal integrity), at time zero. Each aliquot was divided for cytometric analysis at T0 (immediately), T24 (24 h after formaldehyde fixation) and T1w (1 week post-fixation). Fixed samples showed higher viability and acrosomal integrity values (T24: 70.75%, 97.24%; T1w: 71.80%, 97.21%) than T0 (67.63%, 95.89%). This may reflect fluorescence alterations associated with fixation. Strong correlations and Bland–Altman analysis confirmed consistency across time points. This method enables accurate sperm quality evaluation up to one week after collection, offering a useful tool for reproductive monitoring in field conditions without immediate analysis. Further research on ejaculated semen and field protocols is recommended. Full article

Objective: To evaluate the concordance of automated 3D superimposition methods applied to digital models, with a focus on methods that consider stable palatal regions as geometric reference landmarks versus those that do not. Design and setting: This was a prospective, cross-sectional study using digital model files of patients undergoing orthodontic treatment in a university clinical setting. Participants: Sixty-one patients were prospectively enrolled and divided into three groups based on the type of orthodontic treatment they received: (20) non-extractive orthodontic treatment without intermaxillary elastics, (21) intermaxillary elastics, and (20) control subjects with no orthodontic movement. The inclusion criteria included the availability of complete pre- and post-treatment digital casts and the absence of significant craniofacial anomalies. Methods: Three superimposition methods were tested: (1) superimposition according to palate and palatal ridges, (2) best-fit superimposition of arches in occlusion, and (3) best-fit superimposition of individual arches. Discrepancies were identified by comparing the spatial positions derived from each method. Within three spatial axes, deviations of ±0.5 mm and ±1.15° were not considered significant. Bland–Altman plots were used to quantify palatal rugae based and non-based spatial differences between methods. Differences in the superimposition results between the three patient groups were evaluated using ANOVA tests. Results: Differences in spatial position between the superimposition methods often exceeded the acceptable range. The results were compared between the three patient groups with a statistical significance of α = 0.05. In the present study, the high reliability of the superimposition method based on the palate and palatal ridges was observed. Conclusion: Superimposition methods based on the palate and palatal rugae provide superior accuracy in determining treatment-related changes in upper arch digital models. These findings illustrate the need for appropriate selection of superimposition techniques based on the study objective of using clinically relevant techniques. Full article

Background: Ultrasound (U/S) can be used to evaluate skeletal muscle characteristics in clinical and sports settings. Handheld U/S devices have recently emerged as a cheaper and portable alternative to conventional U/S systems. However, further research is warranted on their reliability. We assessed the reliability and inter-device agreement between a handheld U/S device (Clarius L15 HD₃) and a more conventional U/S system (GE LOGIQ e) for measuring the thickness of the rectus femoris (RF) and vastus intermedius (VI). Methods: Cross-sectional images of the RF and VI muscles were obtained in 20 participants by two assessors, and on two separate occasions by one of those assessors, using the Clarius L15 HD₃ and GE LOGIQ e devices. RF and VI thickness measurements were obtained to determine the intra-rater reliability, inter-rater reliability, and inter-device agreement. Results: All intraclass correlation coefficients (ICCs) were above 0.9 for intra-rater reliability (range: 0.94 to 0.97), inter-rater reliability (ICC: 0.97), and inter-device agreement (ICC: 0.98) when comparing the two devices in assessing RF and VI thickness. For the RF, the Bland–Altman plot revealed a mean difference of 0.06 ± 0.07 cm, with limits of agreement ranging from 0.21 to −0.09, whereas for the VI, the Bland–Altman plot showed a mean difference of 0.07 ± 0.10 cm, with limits of agreement ranging from 0.27 to −0.13. Conclusions: The handheld Clarius L15 HD₃ was reliable and demonstrated high agreement with the more conventional GE LOGIQ e for assessing the thickness of the RF and VI in young, healthy adults. Full article

Background: Transient elastography (TE), using Fibroscan^® and point shear wave elastography (pSWE), are two techniques used to estimate liver fibrosis. The aim of our study was to compare, for the first time, these two techniques in Metabolic Dysfunction-Associated Steatotic Liver Disease (MASLD), stratifying the analysis on the basis of the grades of steatosis. Methods: We recruited 85 consecutive MAFLD patients who underwent liver stiffness (LS) measurement performed by Fibroscan^® and pSWE on the same day. Severity of steatosis was estimated by Fibroscan^® and expressed as controlled attenuation parameter (CAP), ranging from S0 to S3. Spearman’s “r” coefficient was used to calculate the correlation and Bland–Altman graphs was used to evaluate the agreement. Results: In general, the correlation and agreement between Fibroscan^® and pSWE were substantial (r = 0.66, p < 0.001 and bias= −0.64 ± 2.48, respectively). When data were analyzed according to the grade of steatosis, an increasing significant correlation was observed going from S0 to S2 (r = 0.79, r = 0.81, and r = 0.85, respectively), whereas a low correlation and agreement were observed for S3 patients (r = 0.48, p = 0.003, bias= −0.95 ± 2.51). Conclusions: Fibroscan^® and pSWE are equivalent techniques to estimate liver fibrosis in patients with mild to moderate steatosis, while in presence of severe steatosis their agreement is low. Full article

Background: Reliable platelet (PLT) measurement is crucial for the accurate diagnosis of thrombocytopenia. Several methods exist for automated PLT counting, including the impedance method (PLT-I), as well as optical and fluorescence methods (PLT-F). The impedance method is cost-effective but susceptible to interference from small red blood cells and schistocytes. In contrast, fluorescent assessment offers higher specificity but is more expensive, as it requires additional dyes and detectors. Hybrid platelet counting (PLT-H) combines impedance with measurements from the leukocyte differentiation channel and is available without additional cost. Aim: The aim of this study was to evaluate the accuracy of hybrid PLT counting in anemic samples. Methods: In this retrospective study, PLT counts from 583 unselected anemic samples were analyzed using two different analyzers: the Sysmex XN3500, equipped with fluorescent PLT-F technology, and the Mindray BC6200, which uses both impedance (PLT-I) and hybrid (PLT-H) technologies. Agreement between PLT-I and PLT-F, as well as between PLT-H and PLT-F, was assessed using Bland–Altman plots. Correlation between the methods was evaluated using the Pearson correlation coefficient. Results: The hybrid method demonstrated better accuracy in PLT counting compared to the impedance method. Correlation between PLT-H and PLT-F was excellent, ranging from 0.991 to 0.999. In thrombocytopenic samples (PLT < 50 G/L), the hybrid method also provided more reliable PLT counts than the impedance method, reducing the number of falsely elevated PLT results by nearly fivefold. Conclusions: Hybrid platelet counting yields more accurate results than the impedance method in anemic samples and shows excellent correlation with the fluorescence method. Full article

In this paper, we propose noncontact heart rate (HR), oxygen saturation (SpO2), and respiratory rate (RR) detection methods using a smartphone camera. HR frequency is detected through filtering after obtaining a remote PPG (rPPG) signal and its power spectral density (PSD) is detected using color difference signal amplification and the plane-orthogonal-to-the-skin method. Additionally, the SpO2 is detected using the HR frequency and the absorption ratio of the G and B color channels based on oxyhemoglobin absorption and reflectance theory. After this, the respiratory frequency is detected using the PSD of rPPG through respiratory frequency band filtering. For the image sequences recorded under various imaging conditions, the proposed method demonstrated superior HR detection accuracy compared to existing methods. The confidence intervals for HR and SpO2 detection were analyzed using Bland–Altman plots. Furthermore, the proposed RR detection method was also verified to be reliable. Full article

Background: Smartphones offer a promising tool for monitoring refractive error, especially in underserved areas where there is a shortage of eye-care professionals. We propose a novel method for measuring spherical over-refraction using smartphones. Methods: Specific levels of myopia using positive spherical trial lenses, ranging from 0.00 D to 1.50 D in 0.25 D increments, were induced in 30 young participants (22 ± 5 years). A comparison was conducted between the induced over-refraction and the measurements obtained using a non-commercial mobile application based on the face–device distance measurement using the front camera while the subject was performing a resolution task. Results: Calibrated mobile app over-refraction results showed that 89.5% of the estimates had an error ≤ 0.25 D, and no errors exceeding 0.50 D. Bland–Altman analysis revealed no significant bias between app and clinical over-refraction, with a mean difference of 0.00 D ± 0.44 D (p = 0.981), indicating high accuracy and precision of the method. Conclusions: The methodology used shows high accuracy and precision in the measurement of the spherical over-refraction with only the use of a smartphone, allowing self-monitorization of potential myopia progression. Full article

Background: Despite the growing demand for amyloid PET quantification, practical challenges remain. As automated software platforms are increasingly adopted to address these limitations, we evaluated the reliability of commercial tools for Centiloid quantification against the original Centiloid Project method. Methods: This retrospective study included 332 amyloid PET scans (165 [¹⁸F]Florbetaben; 167 [¹⁸F]Flutemetamol) performed for suspected mild cognitive impairments or dementia, paired with T1-weighted MRI within one year. Centiloid values were calculated using three automated software platforms, BTXBrain, MIMneuro, and SCALE PET, and compared with the original Centiloid method. The agreement was assessed using Pearson’s correlation coefficient, the intraclass correlation coefficient (ICC), a Passing–Bablok regression, and Bland–Altman plots. The concordance with the visual interpretation was evaluated using receiver operating characteristic (ROC) curves. Results: BTXBrain (R = 0.993; ICC = 0.986) and SCALE PET (R = 0.992; ICC = 0.991) demonstrated an excellent correlation with the reference, while MIMneuro showed a slightly lower agreement (R = 0.974; ICC = 0.966). BTXBrain exhibited a proportional underestimation (slope = 0.872 [0.860–0.885]), MIMneuro showed a significant overestimation (slope = 1.053 [1.026–1.081]), and SCALE PET demonstrated a minimal bias (slope = 1.014 [0.999–1.029]). The bias pattern was particularly noted for FMM. All platforms maintained their trends for correlations and biases when focusing on subthreshold-to-low-positive ranges (0–50 Centiloid units). However, all platforms showed an excellent agreement with the visual interpretation (areas under ROC curves > 0.996 for all). Conclusions: Three automated platforms demonstrated an acceptable reliability for Centiloid quantification, although software-specific biases were observed. These differences did not impair their feasibility in aiding the image interpretation, as supported by the concordance with visual readings. Nevertheless, users should recognize the platform-specific characteristics when applying diagnostic thresholds or interpreting longitudinal changes. Full article

Objectives: Pelvic tumor resections demand high surgical precision to ensure clear margins while preserving function. Although patient-specific instruments (PSIs) improve osteotomy accuracy, positioning errors remain a limitation. This study evaluates the feasibility, accuracy, and usability of a novel dual-function augmented reality (AR) system for intraoperative guidance in PSI positioning and osteotomy execution using a head-mounted display (HMD). The system provides dual-function support by assisting both PSI placement and osteotomy execution. Methods: Ten fresh-frozen cadaveric hemipelves underwent AR-assisted internal hemipelvectomy, using customized 3D-printed PSIs and a new in-house AR software integrated into an HMD. Angular and translational deviations between planned and executed osteotomies were measured using postoperative CT analysis. Absolute angular errors were computed from plane normals; translational deviation was assessed as maximum error at the osteotomy corner point in both sagittal (pitch) and coronal (roll) planes. A Wilcoxon signed-rank test and Bland–Altman plots were used to assess intra-workflow cumulative error. Results: The mean absolute angular deviation was 5.11 ± 1.43°, with 86.66% of osteotomies within acceptable thresholds. Maximum pitch and roll deviations were 4.53 ± 1.32 mm and 2.79 ± 0.72 mm, respectively, with 93.33% and 100% of osteotomies meeting translational accuracy criteria. Wilcoxon analysis showed significantly lower angular error when comparing final executed planes to intermediate AR-displayed planes (p < 0.05), supporting improved PSI positioning accuracy with AR guidance. Surgeons rated the system highly (mean satisfaction ≥ 4.0) for usability and clinical utility. Conclusions: This cadaveric study confirms the feasibility and precision of an HMD-based AR system for PSI-guided pelvic osteotomies. The system demonstrated strong accuracy and high surgeon acceptance, highlighting its potential for clinical adoption in complex oncologic procedures. Full article

Four-dimensional (4D) flow MRI has shown promise for the assessment of aortic hemodynamics. However, data analysis traditionally requires manual and time-consuming human input at several stages. This limits reproducibility and affects analysis workflows, such that large-cohort 4D flow studies are lacking. Here, a fully automated artificial intelligence (AI) 4D flow analysis pipeline was developed and evaluated in a cohort of over 350 subjects. The 4D flow MRI analysis pipeline integrated a series of previously developed and validated deep learning networks, which replaced traditionally manual processing tasks (background-phase correction, noise masking, velocity anti-aliasing, aorta 3D segmentation). Hemodynamic parameters (global aortic pulse wave velocity (PWV), peak velocity, flow energetics) were automatically quantified. The pipeline was evaluated in a heterogeneous single-center cohort of 379 subjects (age = 43.5 ± 18.6 years, 118 female) who underwent 4D flow MRI of the thoracic aorta (n = 147 healthy controls, n = 147 patients with a bicuspid aortic valve [BAV], n = 10 with mechanical valve prostheses, n = 75 pediatric patients with hereditary aortic disease). Pipeline performance with BAV and control data was evaluated by comparing to manual analysis performed by two human observers. A fully automated 4D flow pipeline analysis was successfully performed in 365 of 379 patients (96%). Pipeline-based quantification of aortic hemodynamics was closely correlated with manual analysis results (peak velocity: r = 1.00, p < 0.001; PWV: r = 0.99, p < 0.001; flow energetics: r = 0.99, p < 0.001; overall r ≥ 0.99, p < 0.001). Bland–Altman analysis showed close agreement for all hemodynamic parameters (bias 1–3%, limits of agreement 6–22%). Notably, limits of agreement between different human observers’ quantifications were moderate (4–20%). In addition, the pipeline 4D flow analysis closely reproduced hemodynamic differences between age-matched adult BAV patients and controls (median peak velocity: 1.74 m/s [automated] or 1.76 m/s [manual] BAV vs. 1.31 [auto.] vs. 1.29 [manu.] controls, p < 0.005; PWV: 6.4–6.6 m/s all groups, any processing [no significant differences]; kinetic energy: 4.9 μJ [auto.] or 5.0 μJ [manu.] BAV vs. 3.1 μJ [both] control, p < 0.005). This study presents a framework for the complete automation of quantitative 4D flow MRI data processing with a failure rate of less than 5%, offering improved measurement reliability in quantitative 4D flow MRI. Future studies are warranted to reduced failure rates and evaluate pipeline performance across multiple centers. Full article

Everolimus (EVE), an mTOR inhibitor, is widely used in solid organ transplantation (SOT) because of its immunosuppressive properties. Due to its narrow therapeutic window and significant pharmacokinetic variability, therapeutic drug monitoring (TDM) is essential for achieving optimal outcomes. We developed and thoroughly validated a robust LC-MS/MS method to measure EVE levels in venous whole blood (WB) and capillary blood collected using two microsampling devices: Mitra™ (volumetric absorptive microsampling, VAMS) and Capitainer^® (quantitative dried blood spot, qDBS). The validation followed EMA and IATDMCT guidelines, assessing linearity (1.27–64.80 ng/mL for WB and 0.50–60 ng/mL for VAMS/qDBS), as well as selectivity, accuracy, precision, matrix effects, recovery, stability, and incurred sample reanalysis. Clinical validation involved 66 matched samples from 33 adult SOT recipients. The method demonstrated high accuracy and precision across all matrices, with no significant carryover or matrix interference. Statistical analysis using Passing–Bablok regression and Bland–Altman plots showed excellent agreement between the microsampling methods and the venous reference. Hematocrit effects were tested both in laboratory conditions and on clinical samples and were found to be negligible. This study provides the first comprehensive analytical and clinical validation of the Mitra and Capitainer devices for EVE monitoring. The validated LC-MS/MS microsampling method supports decentralized, patient-centred TDM, offering a reliable alternative to conventional blood sampling in transplant care. Full article

Background/Aim: To date, there have been no data regarding the reproducibility or agreement of meal duration when a test meal is eaten. To confirm the reproducibility and agreement of the meal duration, number of chews, chewing tempo, and number of bites of a test meal, we performed a prospective observation study. Methods: We measured the duration, number of chews, chewing tempo, and number of bites of a test meal (salmon bento) among 33 participants (male: 15; female: 18) aged 20–60 years who ate twice at 2-week intervals to verify the agreement (by Bland-Altman (BA) analysis) and reproducibility (intraclass correlation coefficient (ICC)) by sex. Results: The meal duration (s) and number of bites (times) were significantly greater in the female group (560.4 (128.7) and 731.9 (266.3), p = 0.023; 17.1 (9.9) vs. 26.4 (13.7), p = 0.036), and the number of chews tended to be greater in the female group (752.5 (203.3) vs. 938.1 (375.9), p = 0.083). Meal duration was positively associated with the number of chews (0.64 [0.53, 0.74], p < 0.001) and bites (10.4 [5.1, 15.8], p < 0.001). For both sexes, the % error calculated via BA analysis was high for meal duration, the number of chews, and the chewing tempo (21.4 and 13.4%; 16.5 and 18.5%; and 6.8 and 5.3%, respectively) and low for the number of bites (37.9 and 68.9%). The ICCs were high for meal duration (0.73 and 0.90), the number of chews (0.76 and 0.89), and the chewing tempo (0.76 and 0.90), and low for the number of bites (0.84 and 0.69). Moreover, systematic and proportional errors were found only for the number of bites in the female group (median_difference with 95% CI: −9.00 (−13.00, −2.00); −0.320 (−0.45, −0.093)). Conclusions: Although the sample size was small due to the exploratory nature of the study, meal duration, number of chews, and chewing tempo had high reproducibility and agreement, at least when this test meal was consumed. These measures may indicate individual-specific eating behavior. Full article

Background/Objectives: Speech intelligibility (SI) is a key indicator of spoken language development, especially for children with hearing loss, as it directly impacts communication and social engagement. However, due to logistical and methodological challenges, SI assessment is often underutilised in clinical practice. This study aimed to evaluate the accuracy and consistency of an artificial intelligence (AI)-based transcription model in assessing SI in young children with cochlear implants (CI), hearing aids (HA), or normal hearing (NH), in comparison to naïve human listeners. Methods: A total of 580 speech samples from 58 five-year-old children were transcribed by three naïve listeners and the AI model. Word-level transcription accuracy was evaluated using Bland–Altman plots, intraclass correlation coefficients (ICCs), and word error rate (WER) metrics. Performance was compared across the CI, HA, and NH groups. Results: The AI model demonstrated high consistency with naïve listeners across all groups. Bland–Altman analyses revealed minimal bias, with fewer than 6% of sentences falling outside the 95% limits of agreement. ICC values exceeded 0.9 in all groups, with particularly strong agreement in the NH and CI groups (ICCs > 0.95). WER results further confirmed this alignment and indicated that children with CIs showed better SI performance than those using HAs. Conclusions: The AI-based method offers a reliable and objective solution for SI assessment in young children. Its agreement with human performance supports its integration into clinical and home environments for early intervention and ongoing monitoring of speech development in children with hearing loss. Full article

Heart rate (HR) is strongly affected by the autonomic nervous system (ANS), while its spontaneous fluctuations, called heart rate variability (HRV), report about the dynamics of the complex, vegetative regulation of the heart rhythm. Hence, HRV is widely considered an important marker of the ANS effects on the cardiac system, and as such, a crucial diagnostic tool in cardiology. In order to obtain nontrivial results from HRV analysis, it would be desirable to establish exact, universal interrelations between the typical HRV parameters and HR itself. That, however, has not yet been fully accomplished. Hence, our aim was to perform a comparative statistical analysis of ECG recordings from a public database, with a focus on the HR dependence of typical HRV parameters. We revealed their fundamental connections, which were substantiated by basic mathematical considerations, and were experimentally demonstrated via the analysis of 24 h of ECG recordings of more than 200 healthy individuals. The large database allowed us to perform unique age-cohort analyses. We confirmed the HR dependence of typical time-domain parameters, such as RMSSD and SDNN, frequency-domain parameters such as the VLF, LF, and HF components, and nonlinear indices such as sample entropy and DFA exponents. In addition to shedding light on their relationship, we are the first, to our knowledge, to identify a new, diffuse structure in the VHF regime as an important indicator of SNS activity. In addition, the demonstrated age dependence of the HRV parameters gives important new insight into the long-term changes in the ANS regulation of the cardiac system. As a possible molecular physiological mechanism underlying our new findings, we suggest that they are associated with Piezo2 channel function and its age-related degradation. We expect our results to be utilized in HRV analysis related to both medical research and practice. Full article

Background and Objectives: General-purpose multimodal large language models (LLMs) are increasingly used for medical image interpretation despite lacking clinical validation. This study evaluates the diagnostic reliability of ChatGPT-4o and Claude 2 in photographic assessment of adolescent idiopathic scoliosis (AIS) against radiological standards. This study examines two critical questions: whether families can derive reliable preliminary assessments from LLMs through analysis of clinical photographs and whether LLMs exhibit cognitive fidelity in their visuospatial reasoning capabilities for AIS assessment. Materials and Methods: A prospective diagnostic accuracy study (STARD-compliant) analyzed 97 adolescents (74 with AIS and 23 with postural asymmetry). Standardized clinical photographs (nine views/patient) were assessed by two LLMs and two orthopedic residents against reference radiological measurements. Primary outcomes included diagnostic accuracy (sensitivity/specificity), Cobb angle concordance (Lin’s CCC), inter-rater reliability (Cohen’s κ), and measurement agreement (Bland–Altman LoA). Results: The LLMs exhibited hazardous diagnostic inaccuracy: ChatGPT misclassified all non-AIS cases (specificity 0% [95% CI: 0.0–14.8]), while Claude 2 generated 78.3% false positives. Systematic measurement errors exceeded clinical tolerance: ChatGPT overestimated thoracic curves by +10.74° (LoA: −21.45° to +42.92°), exceeding tolerance by >800%. Both LLMs showed inverse biomechanical concordance in thoracolumbar curves (CCC ≤ −0.106). Inter-rater reliability fell below random chance (ChatGPT κ = −0.039). Universal proportional bias (slopes ≈ −1.0) caused severe curve underestimation (e.g., 10–15° error for 50° deformities). Human evaluators demonstrated superior bias control (0.3–2.8° vs. 2.6–10.7°) but suboptimal specificity (21.7–26.1%) and hazardous lumbar concordance (CCC: −0.123). Conclusions: General-purpose LLMs demonstrate clinically unacceptable inaccuracy in photographic AIS assessment, contraindicating clinical deployment. Catastrophic false positives, systematic measurement errors exceeding tolerance by 480–1074%, and inverse diagnostic concordance necessitate urgent regulatory safeguards under frameworks like the EU AI Act. Neither LLMs nor photographic human assessment achieve reliability thresholds for standalone screening, mandating domain-specific algorithm development and integration of 3D modalities. Full article