Search Results (393)

Although Zn (II)-(−)-Epigallocatechin gallate (EGCg) complex (Zn-EGCg) is known for its promising bioactivities, little attention has been paid to its incorporation into daily green tea consumption. In this study, we aimed to incorporate Zn (II) into green tea extract to promote the formation of Zn-EGCg complex within the tea matrix. We then investigated how the formation of Zn-complexed green tea extract (Zn-GTE) influences the gut microbiota in a Western diet (WD)-fed mouse model. Structural analyses using ultraviolet–visible spectroscopy (UV–Vis), Fourier-transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance (¹H NMR), and powder X-ray diffraction (PXRD) suggested that Zn (II) interacted with hydroxyl groups of polyphenols within the extract, consistent with Zn-EGCg formation, although the complex could not be unequivocally identified. Under intake levels equivalent to daily consumption, Zn-GTE administration restored WD-induced reductions in alpha-diversity and resulted in a distinct microbial composition compared to treatment with green tea extract (GTE) or Zn alone, as shown by beta-diversity analysis. Linear discriminant analysis Effect Size (LEfSe) analysis revealed increased abundances of bacterial taxa belonging to o_Clostridiales, o_Bacteroidales, and f_Rikenellaceae, and decreased abundances of g_Akkermansia in the Zn-GTE group compared to the GTE group. These findings highlight that Zn-GTE, prepared via Zn (II) supplementation to green tea, may exert distinct microbiota-modulating effects compared to its individual components. This study provides new insights into the role of dietary metal–polyphenol complexes, offering a food-based platform for studying metal–polyphenol interactions under physiologically relevant conditions. Full article

Streptomyces sp. AWH31-250, isolated from a tidal mudflat in the Nakdong River estuary in Busan, Republic of Korea, was found to produce two novel p-aminoacetophenone derivatives, mohangic acid H (1) and mohangiol (2). Their planar structures were established by comprehensive 1D and 2D NMR spectroscopy, mass spectrometry, and UV analysis, possessing a shorter carbon-chain with a diene moiety, whereas known mohangic acids A–F bear a longer carbon-chain with a triene moiety. The absolute configurations of the key stereogenic centers were determined via computational DP4+ calculations and bioinformatic analysis of the ketoreductase domain sequence from the biosynthetic gene cluster. Based on the careful gene analysis along with whole-genome sequencing, the first plausible biosynthetic pathway of mohangic acids A–G and mohangiol was proposed. Mohangic acid H (1) and mohangiol (2) displayed moderate inhibitory activity against Candida albicans isocitrate lyase with IC₅₀ values of 21.37 and 21.12 µg/mL, respectively. Full article

Background: Transition metal complexes incorporating fluorinated counter anions represent a significant class of compounds with broad applications in industry, pharmaceuticals, and biomedicine. These fluorinated anions are known to enhance the solubility, stability, and reactivity of the complexes, thereby expanding their functional utility in various chemical and biological contexts. Methods: A set of metal(II) complexes of the general formula [MPy₆][B(C₆F₅)₄]₂ where (Py = pyridine, M = Mn (1), Fe (2), Co (3), Ni (4), Cu (5), Zn (6)) have been synthesized by direct reaction of metal halides and pyridine in the presence of Ag[B(C₆F₅)₄]. The complexes were characterized using different techniques to assure their purity, such as elemental analysis (EA), electron paramagnetic resonance (EPR) spectroscopy, thermogravimetric analysis (TGA), ultraviolet–visible (UV–Vis) spectroscopy, ¹¹B-NMR, ¹H-NMR, and FT-IR spectroscopy. The antimicrobial and antifungal properties against different types of bacteria and fungi were studied for all prepared complexes. Results: The synthesized complexes exhibited broad-spectrum antimicrobial activity, demonstrating variable efficacy compared to the reference antibiotic, oxytetracycline (positive control). Notably, complex 6 displayed exceptional antibacterial activity against Streptococcus pyogenes, with a minimum inhibitory concentration (MIC) of 4 µg/mL, outperforming the control (MIC = 8 µg/mL). Complexes 1, 2, and 4 showed promising activity against Shigella flexneri, Klebsiella pneumoniae, and Streptococcus pyogenes, each with MIC values of 8 µg/mL. Conversely, the lowest activity (MIC = 512 µg/mL) was observed for complexes 3, 5, and 6 against Pseudomonas aeruginosa, Escherichia coli, and Klebsiella pneumoniae, respectively. Regarding antifungal properties, complexes 5 and 6 demonstrated the highest activity against Candida albicans, with MIC values of 8 µg/mL, equivalent to that of the positive control, fluconazole. Density functional theory (DFT) calculations confirmed an overall octahedral coordination geometry for all complexes, with tetragonal distortions identified in complexes 3, 4, and 5. Full article

Glass curators often question how their treatments affect the long-term stability of historical glass. While damp cotton swabs are commonly used to remove surface salts and dust, the use of water remains controversial, particularly for heavily altered glass, due to concerns about worsening hydration. This study investigates the effect of water rinsing on an unstable soda-lime glass altered for six months (monoliths) and fifteen months (powders) at 35 °C and 85% relative humidity. Samples were then rinsed with Milli-Q water at 20 °C or 50 °C, and the monolithic glass was subsequently subjected to an additional 15 months of alteration under the same conditions. The glass surface was characterized by optical and scanning electron microscopy (SEM) as well as Raman spectroscopy to identify the nature of the salts. The evolution of the hydrated layer was assessed using transmission FTIR, Raman and solid-state NMR spectroscopies, ToF-SIMS, and thermogravimetric analysis (TGA). The results show that rinsing effectively removes surface salts—primarily sodium carbonate—and induces structural changes in the hydrated layer, promoting silicate network polymerization. Upon resuming alteration, rinsed monolithic samples exhibit no further degradation after the additional 15 months of alteration. These findings offer promising insights for conservation practices and may help curators refining their treatment strategies for altered glass. Full article

Background: Natural products play a crucial role in cancer treatment due to their ability to selectively target cancer cells. Andrographolide, a major constituent of Andrographis paniculata, exhibits potential anticancer properties. Considering the pharmacological importance of nitrogen-based heteroaromatic scaffolds, particularly pyrazole motifs, this study aimed to integrate the pyrazole pharmacophore with the andrographolide scaffold to develop novel therapeutic candidates. Methods: Twenty novel 3,19-(N-phenyl-3-aryl-pyrazole) acetals of andrographolide and isoandrographolide were synthesized and characterized using UV-Vis, FT-IR, NMR, and HRMS. Initial anticancer screening was conducted by the National Cancer Institute (NCI), USA, against 60 human cancer cell lines. The most promising compound, 1f (R = 4-F), was selected for further biological evaluation in the MDA-MB-231 breast cancer cell line. Results: The MTT assay results demonstrated that compound 1f exhibited strong, dose-dependent anti-proliferative effects. The apoptosis analysis of 1f revealed a time-dependent increase in apoptotic cells, and cell cycle studies indicated S phase arrest in MDA-MB-231 cells. Antioxidant activity via the DPPH assay identified compounds 1b (R = 3-NO₂) and 2b (R = 3-NO₂) as the most effective radical scavengers. The most active compounds were also evaluated for drug-likeness using in silico Lipinski’s rule assessments. Conclusions: The synthesized 3,19-(N-phenyl-3-aryl-pyrazole) acetals of andrographolide and isoandrographolide exhibited promising anticancer and antioxidant properties. Among them, compound 1f showed the most significant activity, supporting its potential as a lead candidate for further anticancer drug development. Full article

Main-chain conjugated and non-conjugated polyelectrolytes are an important class of materials that have many technological applications ranging from fire-retardant materials to carbon-nanotube composites, nonlinear optical materials, electrochromic materials for smart windows, and optical sensors for biomolecules. Here, we describe a series of poly(pyridinium salt)s-fluorene containing 9,9-bis(4-aminophenyl)fluorene moieties with various organic counterions that were synthesized using ring-transmutation polymerization and metathesis reactions, which are non-conjugated polyelectrolytes. Their chemical structures were characterized by Fourier transform infrared (FTIR), proton (¹H) and fluorine 19 (¹⁹F) nuclear magnetic resonance (NMR) spectrometers, and elemental analysis. They exhibited polyelectrolytic behavior in dimethyl sulfoxide. Their lyotropic liquid-crystalline phases were examined by polarizing optical microscopy (POM) and small angle X-ray scattering (SAXS) studies. Their emission spectra exhibited a positive solvatochromism on changing the polarity of solvents. They emitted greenish-yellow lights in polar organic solvents. They formed aggregates in polar aprotic and protic solvents with the addition of water (v/v, 0–90%), whose λ_em peaks were blue shifted. Full article

A series of para-trifluoromethoxy-substituted and fluorobenzhydryl-functionalized 1,2-bis(imine)acenaphthene ligands: 1-[2,6-{(4-F-C₆H₄)₂CH}₂-4-F₃COC₆H₂N]-2-(ArN)C₂C₁₀H₆ (Ar = 2,6-Me₂C₆H₃ L1, 2,6-Et₂C₆H₃ L2, 2,6-iPr₂C₆H₃ L3, 2,4,6-Me₃C₆H₂ L4, 2,6-Et₂-4-MeC₆H₂ L5), were synthesized and used to generate their corresponding nickel(II) bromide complexes (Ni1–Ni5). Elemental analysis, ¹⁹F NMR, and FT-IR spectroscopy were employed to characterize these five nickel complexes. Single-crystal X-ray diffraction of Ni2 and Ni4 confirmed distorted tetrahedral geometries. Upon activation with either EtAlCl₂ (ethylaluminum dichloride) or EASC (ethyl aluminum sesquichloride), these complexes showed exceptional high activities (up to 22.0 × 10⁶ g PE mol⁻¹ (Ni) h⁻¹) and remarkable thermal stability (4.82 × 10⁶ g PE mol⁻¹(Ni) h⁻¹ at 80 °C) towards ethylene polymerization. The resulting polyethylenes are highly branched, with the type and extent of branches tunable by temperature, solvent, and co-catalyst choice. Moreover, these polymers demonstrated excellent tensile strength (σ_b up to 20.7 MPa) and elastic recovery (up to 58%), characteristic of thermoplastic elastomers (TPEs). These results highlight the dual role of trifluoromethoxy and fluorobenzhydryl groups in enhancing catalytic performance and polymer properties. Full article

Biflavonoids are a unique subclass of dietary polyphenolic compounds known for their diverse bioactivities. Despite these benefits, these biflavonoids remain largely underexplored due to their limited natural availability and harsh conditions required for their synthesis, which restricts broader research and application in functional foods and nutraceuticals. To address this gap, we synthesized a library of rare biflavonoids using a radical–nucleophile coupling reaction previously reported by our group. The food grade coupling reaction under weakly alkaline water at room temperature led to isolation of 28 heterocoupled biflavones from 11 monomers, namely 3′,4′-dihydroxyflavone, 5,3′,4′-trihydroxyflavone, 6,3′,4′-trihydroxyflavone, 7,3′,4′-trihydroxyflavone, diosmetin, chrysin, acacetin, genistein, biochanin A, and wogonin. The structures of the dimers are characterized by nuclear magnetic resonance spectroscopy (NMR) and high-resolution mass spectroscopy (HRMS). In addition, we evaluated the antioxidant potential of these biflavones using a DPPH (2,2-diphenyl-1-picrylhydrazyl) radical scavenging assay and the DPPH value ranges between 0.75 to 1.82 mM of Trolox/mM of sample across the 28 synthesized dimers. Additionally, a three-dimensional quantitative structure–activity relationship (3D-QSAR) analysis was conducted to identify structural features associated with enhanced antioxidant activity. The partial least squares (PLS) regression QSAR model showed acceptable r² = 0.936 and q² = 0.869. Additionally, the average local ionization energy (ALIE), electrostatic potential (ESP), Fukui index (F-), and electron density (ED) were determined to identify the key structural moiety that was capable of donating electrons to neutralize reactive oxygen species. Full article

Objective: This study expands on the polymorphic characterization of elacestrant dihydrochloride, developed by Stemline Therapeutics and approved by the FDA in 2023. The article focuses on more extensive polymorphism screening using various methods and solvents to discover the new polymorphism forms of this molecule, besides identifying three polymorphic forms in the previously published studies. Methods: The crystalline and amorphous elacestrant hydrochloride solubility was assessed, and crystals were formed, followed by polymorph screening using 40 non-conventional solvents via different techniques to obtain the new polymorphic forms. XRPD, NMR, DSC, TGA, IC, and HPLC were used for solid-state characterization. Results: Patterns A, B, C, D, E, F, and G, and previously published forms 1,3, were identified in multiple studies during the extensive polymorphism screening using various methods and numerous solvent systems. Solid state characterization and purity analysis were completed using different relevant instruments. After the characterization, it was found that Pattern A was the most stable, like the desired/most stable Form 1, but it had fewer crystals; Pattern B is like Form 3 but a unique XRPD pattern; Pattern D is degradant; Pattern C, E, F, and G are considered as the new pattern of elacestrant along with patterns A and B. Conclusions: With XRPD, six new patterns (A, B, C, E, F, G) were identified. Patterns A, C, and E are promising crystalline candidates for further analysis and scale-up. Full article

Serratia marcescens is a common Gram-negative and facultative anaerobic bacillus that produces serratiochelins with several bioactivities. In this study, four catechol siderphores (1–4), including two new ones named serratiochelins E (1) and F (2), were obtained from the fermentation of a mangrove-derived bacterium, S. marcescens F2-2. The structures were elucidated with various spectroscopic methods such as NMR and HR-ESI-MS. Absolute and geometric configurations of the new compounds were established by employing quantum NMR calculations in conjunction with DP4+ probability analysis, ECD calculations, and the advanced Marfey’s method. The bioactivity test showed that serratiochelin B (3) displayed weak but selective cytotoxicity against HepG2 cancer cells with an IC₅₀ of 50.6 μmol/L and could trigger apoptosis through both Bcl-2/Bax/caspase-3 and Fas/FasL/caspase-8 signaling pathways. These findings deepen the understanding of siderophores of S. marcescens and provide a lead for research on anti-liver cancer drugs. Full article

In this study, nanosilica-based polymers were synthesized and optimized for water-based drilling fluid applications using response surface methodology (RSM). The synthesis process involved the polymerization of methacryloyloxyethyl trimethyl ammonium chloride (DMC), methacrylic acid (MAA), and silane-modified nanosilica (KH570-SiO₂) under varying conditions of temperature, initiator concentration, and pH. Characterization by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (¹H-NMR), thermogravimetric analysis, and optical microscopy confirmed the successful polymerization and incorporation of nanosilica while maintaining structural integrity and thermal stability. The reaction conditions were optimized using RSM with variables including the temperature, pH, and initiator concentration. The optimized conditions (70.9 °C, pH 7, and 0.57 wt.% initiator concentration) resulted in significant enhancements in drilling fluid performance, including a 46.0% reduction in filtration loss, a 28.6% decrease in coefficient of friction (CoF), and improved cutting-carrying capacity (YP/PV ratio). Post-reaction analyses demonstrated the thermal stability and reusability of the synthesized polymers under high-temperature conditions, confirming their applicability in field operations. This work highlights the potential of nanosilica-based polymers in improving drilling fluid performance, offering insights into optimization strategies and enhanced material stability. Full article

Fluorinated pyrethroids, such as cyfluthrin and cyhalothrin, are more effective insecticides due to their enhanced stability and lipophilicity. However, they pose greater risks to non-target organisms. Their persistence in the environment and accumulation in tissues can lead to increased toxicity and ecological concerns. This study investigates the biodegradation of the fluorinated pyrethroids β-cyfluthrin (BCF) and λ-cyhalothrin (LCH) using a newly isolated Bacillus sp. MFK14 from a garden soil microbial consortium. Initial screening using ¹⁹F NMR analysis showed that the microbial consortium degraded both pyrethroids, leading to the isolation of Bacillus sp. MFK14. Subsequent GC-MS analysis revealed various degradation intermediates in both pyrethroids after incubation with Bacillus sp. MFK14. Notably, Bacillus sp. MFK14 completely degraded β-cyfluthrin and λ-cyhalothrin within 48 h at 30 °C. Fluoride ions from β-cyfluthrin and trifluoroacetic acid (TFA) from λ-cyhalothrin were detected as the end-products by ¹⁹F NMR analysis of the aqueous fraction. The pathway of the degradation was proposed for both the pyrethroids indicating shared biodegradation pathways despite different fluorinations. Inhibition studies with 1-ABT suggested the involvement of bacterial cytochrome P450 (CYP) enzymes in their biodegradation. The CYPome of Bacillus sp. MFK14 includes 23 CYP variants that showed significant sequence similarity to known bacterial CYPs, suggesting potential roles in pyrethroid biodegradation and environmental persistence. These findings highlight the potential for bioremediation of fluorinated pesticides, offering an environmentally sustainable approach to mitigate their ecological impact. Full article

This study characterizes the metabolomic profiles of three reference apricot cultivars (‘Bergeron’, ‘Currot’, and ‘Goldrich’) using ¹H NMR spectroscopy and untargeted UPLC-QToF MS/MS to support plant breeding by correlating metabolomic data with fruit phenotyping. The primary objective was to identify and quantify the key metabolites influencing fruit quality from a nutraceutical perspective. The analysis revealed significant differences in primary and secondary metabolites among the cultivars. ‘Bergeron’ and ‘Goldrich’ exhibited higher concentrations of organic acids (109 mg/g malate in ‘Bergeron’ and 202 mg/g citrate in ‘Goldrich’), flavonoids such as epicatechin (0.44 mg/g and 0.79 mg/g, respectively), and sucrose (464 mg/g and 546 mg/g), contributing to their acidity-to-sugar balance. Conversely, ‘Currot’ showed higher levels of amino acids (24.44 mg/g asparagine) and sugars, particularly fructose and glucose (79 mg/g and 180 mg/g), enhancing its characteristic sweetness. These findings suggest that metabolomic profiling can provide valuable insights into the biochemical pathways underlying apricot quality traits, aiding in the selection of cultivars with desirable characteristics. The integration of phenotyping data with ¹H NMR and UPLC-QToF MS/MS offers a comprehensive approach to understanding apricot metabolomic diversity, crucial for breeding high-quality, nutritionally enriched fruits that meet market demands. Full article

Plant-derived biopesticides are emerging as a promising and popular alternative for promoting cleaner and safer agricultural practices. The present work aims to explore Argyranthemum frutescens (Asteraceae) as a source of botanical pesticides and to validate this through a cultivation process. To this task, a bioassay-guided fractionation of the ethanolic root extracts from both wild and cultivated A. frutescens on phytopathogenic fungi of Botrytis cinerea, Fusarium oxysporum, and Alternaria alternata was conducted. This approach led to the identification of polyacetylenes with higher potency than commercial fungicides. Specifically, compounds 3 (capillin) and 5 (frutescinone) showed more than 90% growth inhibition at 0.05 mg/mL concentration on B. cinerea, while compounds 2 (capillinol) and 3 were also more active than positive controls, Fosbel-Plus and Azoxystrobin, against F. oxysporum. The structures of the isolated polyacetylenes (1–6, 9, and 10) and alkamides (7, 8, and 11) were determined through spectroscopic analysis, and the absolute configuration of stereocenter C1 of compounds 1, 2, 4 and 9 was determined by NMR-spectroscopy with (R)-(-)-α-methoxy-phenylacetic as a chiral derivatizing agent, and biogenetic considerations. Overall, this study supports the potential of polyacetylenes as promising agrochemical lead compounds against phytopathogens, and validates A. frutescens cultivation as a viable source of biopesticides. Full article

Depsides and their derivatives are a class of polyketides predominantly found in fungal extracts. Herein, a silent nonreducing polyketide synthase (TalsA)-containing gene cluster, which was identified from the Antarctic sponge-derived fungus Talaromyces sp. HDN1820200, was successfully activated through heterologous expression in Aspergillus nidulans. This activation led to the production of two novel depsides, talaronic acid A (1) and B (2), alongside three known compounds (3–5). The further co-expression of TalsA with the decarboxylase (TalsF) demonstrated that it could convert 2 into its decarboxylated derivative 1. The structural elucidation of these compounds was achieved using comprehensive 1D and 2D-NMR spectroscopy, which was complemented by HR-MS analysis. Talaronic acids A and B were firstly reported heterodimers of 3-methylorsellinic acid (3-MOA) and 5-methylorsellinic acid (5-MOA). All isolated compounds (1–5) were tested for their anti-inflammatory potential. Notably, compounds 1 and 2 exhibited anti-inflammatory activity comparable to that of the positive control. These results further enrich the structural class of depside natural products. Full article