Search Results (501)

With the continuous exploration and advancement of communication frequency bands, terahertz and mid-to-far-infrared communication systems have attracted significant attention in recent years. Modulators are essential components in these systems, making the enhancement of modulator performance in the infrared and terahertz bands a prominent research focus. In this study, we propose a high-performance infrared transmission-type modulator based on the plasmon resonance effect of graphene nanoribbons. This design synergistically exploits near-field enhancement from metal slits and defect states in one-dimensional photonic crystals to strengthen light–graphene interactions. The modulator achieves a modulation depth exceeding 80% and an operating bandwidth greater than 4 THz in the mid-infrared range, enabling efficient signal modulation for free-space optical communication. Importantly, the proposed design alleviates experimental challenges typically associated with the need for high graphene mobility and a wide Fermi energy tuning range in conventional approaches, thereby improving its practical feasibility. Moreover, the approach is scalable to far-infrared and terahertz bands, offering valuable insights for advancing signal modulation technologies across these spectral regions. Full article

South Dongting Lake is an essential aquatic ecosystem that receives substantial water inflows from the Xiangjiang and Zishui Rivers. However, it is significantly impacted by human activities, including mining, smelting, and farming. These activities have led to serious contamination of the lake’s sediments with heavy metals (HMs). This study investigated the distribution, mobility, and influencing factors of HMs at the sediment–water interface. To this end, sediment samples were analyzed from three key regions (Xiangjiang River estuary, Zishui River estuary, and northeastern South Dongting Lake) using traditional sampling methods and Diffusive Gradients in Thin Films (DGT) technology. Analysis of fifteen HMs (Pb, Bi, Ni, As, Se, Cd, Sb, Mn, Zn, V, Cr, Cu, Tl, Co, and Fe) revealed significant spatial heterogeneity. The results showed that Cr, Cu, Pb, Bi, Ni, As, Se, Cd, Sb, Mn, Zn, and Fe exhibited high variability (CV > 0.20), whereas V, Tl, and Co demonstrated stable concentrations (CV < 0.20). Concentrations were found to exceed background values of the upper continental crust of eastern China (UCC), Yangtze River sediments (YZ), and Dongting Lake sediments (DT), particularly at the Xiangjiang estuary (XE) and in the northeastern regions. Speciation analysis revealed that V, Cr, Cu, Ni, and As were predominantly found in the residual fraction (F4), while Pb and Co were concentrated in the oxidizable fraction (F3), Mn and Zn appeared primarily in the exchangeable fractions (F1 and F2), and Cd was notably dominant in the exchangeable fraction (F1), suggesting a high potential for mobility. Additionally, DGT results confirmed a significant potential for the release of Pb, Zn, and Cd. Contamination assessment using the Pollution Load Index (PLI) and Geoaccumulation Index (Igeo) identified Pb, Bi, Ni, As, Se, Cd, and Sb as major pollutants. Among these, Bi and Cd were found to pose the highest risks. Furthermore, the Risk Assessment Code (RAC) and the Potential Ecological Risk Index (PERI) highlighted Cd as the primary ecological risk contributor, especially in the XE. The study identified sediment grain size, pH, electrical conductivity, and nutrient levels as the primary influencing factors. The PMF modeling revealed HM sources as mixed smelting/natural inputs, agricultural activities, natural weathering, and mining/smelting operations, suggesting that remediation should prioritize Cd control in the XE with emphasis on external inputs. Full article

Tianshanhong (TSH), black tea products originating from the Ningde Tianshan Mountain, has gained significant recognition in the market. However, the chemical characteristics contributing to the flavor of TSH have not yet been reported. To systematically investigate the non-volatile and volatile compounds in TSH, four grades of TSH were evaluated using national standard sensory methods, revealing that overall quality improved with higher grades. Based on the detection of ultra-performance liquid chromatography–mass spectrometry (UPLC-MS), the content of ester-type catechins was relatively high and decreased with lower grades. A total of 19 amino acids (AAs) were clustered, among them, three amino acids, L-Theanine (L-Thea), Arg, and GABA, showed highly significant correlations with the refreshing taste of TSH. Notably, the content of Arg had the highest correlation with TSH grade, with a coefficient of 0.976 (p < 0.01). According to gas chromatography mass spectrometry (GC-MS) analysis, a total of 861 kinds of volatile compounds were detected, with 282 identified and aroma-active compounds across grades selected using the PLS model. Methyl salicylate and geraniol were particularly notable, showing strong correlations with TSH grades at 0.975 and 0.987 (p < 0.01), respectively. Our findings show that non-volatile and volatile compounds can rationally grade TSH and help understand its flavor quality. Full article

Laser powder bed fusion (LPBF) is an advanced additive manufacturing technology that is gaining increasing interest for biomedical implants because it can produce dense, patient-specific metallic components with controlled microstructures. This study investigated the LPBF fabrication of 316L stainless steel, which is widely used in orthopedic and dental implants, and examined the effects of laser power and scanning speed on the microstructure and mechanical properties relevant to biomedical applications. The study achieved 99.97% density and refined columnar and cellular austenitic grains, with optimized molten pool morphology. The optimal LPBF parameters, 190 W laser power and 700 mm/s, produced a tensile strength of 762.83 MPa and hardness of 253.07 HV_0.2, which exceeded the values of conventional cast 316L stainless steel. These results demonstrated the potential of optimized LPBF 316L stainless steel for functional biomedical applications that require high mechanical integrity and biocompatibility. Full article

Laizhou Bay, a semi-enclosed bay, is prone to storm surges from cold waves due to its geographic and environmental characteristics. This study uses satellite data, in situ measurements, and the MIKE numerical model to analyze storm surges along Laizhou Bay’s coast under no-dike conditions. It examines the surges caused by cold waves with different intensities and directions. This study provides the storm surge disaster risk levels along Laizhou Bay’s coast. The results show that the maximum sustained wind speed during cold waves is distributed between the NW and NE. The NE wind direction causes the most severe storm surge along Laizhou Bay. Under NE-directed cold waves with level 12 wind, the maximum risk areas for Level III and IV are approximately 1341 km² and 1294 km², respectively. Dongying, Shouguang, and Hanting exhibit large Level I and II risk zones. The maximum seawater intrusion distance along the Kenli coast is about 41 km. The coastal segment from Kenli to Changyi is most severely affected by storm surges. It is recommended to effectively maintain and heighten seawalls along this segment to mitigate storm surge disasters caused by strong NE winds. Full article

The in situ emulsification synergistic self-profile control system has wide application prospects for efficient development on offshore oil reservoirs. During water flooding in Bohai heavy oil reservoirs, random emulsification occurs with superimposed Jamin effects. Effectively utilizing this phenomenon can enhance the efficient development of offshore oilfields. This study addresses the challenges hindering water flooding development in offshore oilfields by investigating the emulsification mechanism and key influencing factors based on oil–water emulsion characteristics, thereby proposing a novel in situ emulsification flooding method. Based on a fundamental analysis of oil–water properties, key factors affecting emulsion stability were examined. Core flooding experiments clarified the impact of spontaneous oil–water emulsification on water flooding recovery. Two-dimensional T1–T2 NMR spectroscopy was employed to detect pure fluid components, innovating the method for distinguishing oil–water distribution during flooding and revealing the characteristics of in situ emulsification interactions. The results indicate that emulsions formed between crude oil and formation water under varying rheometer rotational speeds (500–2500 r/min), water cuts (30–80%), and emulsification temperatures (40–85 °C) are all water-in-oil (W/O) type. Emulsion viscosity exhibits a positive correlation with shear rate, with droplet sizes primarily ranging between 2 and 7 μm and a viscosity amplification factor up to 25.8. Emulsion stability deteriorates with increasing water cut and temperature. Prolonged shearing initially increases viscosity until stabilization. In low-permeability cores, spontaneous oil–water emulsification occurs, yielding a recovery factor of only 30%. For medium- and high-permeability cores (water cuts of 80% and 50%, respectively), recovery factors increased by 9.7% and 12%. The in situ generation of micron-scale emulsions in porous media achieved a recovery factor of approximately 50%, demonstrating significantly enhanced oil recovery (EOR) potential. During emulsification flooding, the system emulsifies oil at pore walls, intensifying water–wall interactions and stripping wall-adhered oil, leading to increased T2 signal intensity and reduced relaxation time. Oil–wall interactions and collision frequencies are lower than those of water, which appears in high-relaxation regions (T1/T2 > 5). The two-dimensional NMR spectrum clearly distinguishes oil and water distributions. Full article

To respond to China’s sustainable development goals, this study uses a dynamic panel data set (2009–2023) and the PSM-DID model to examine how blockchain adoption impacts corporate sustainable development performance (CSDP). The results show that blockchain significantly enhances CSDP by 9.8–12.3%, primarily through two channels (reducing financing constraints by improving transparency and decreasing chairman-CEO duality) to optimize governance. Regional environmental regulation strengthens this relationship. Heterogeneity analysis reveals stronger impacts in unregulated industries, private firms, and central–western regions, while state-owned firms show policy-driven governance improvements. The study enriches the understanding of blockchain’s dual role in balancing efficiency and sustainability, offering insights for integrating digital technology into green policy frameworks. Full article

Background/Objectives: Alveolar echinococcosis (AE), caused by Echinococcus multilocularis larvae, poses a significant global health concern. Primarily affecting regions in the northern hemisphere, such as northwest China, which are vital for animal husbandry, it often results in severe hepatic impairment in the host. However, there remains a dearth of knowledge concerning changes in gene expression profiles during the progression of AE. In this study, we employed transcriptome sequencing (RNA sequencing, RNA-Seq) to detect alterations in gene expression profiles in the liver tissues of mice with AE. Our aims were to understand the transcriptome differences in the liver during E. multilocularis infection and to explore the molecular mechanisms underlying the early progression of this disease. Methods: We established a mouse model of AE by intraperitoneally injecting protoscoleces of E. multilocularis. All the inoculated mice were randomly divided into four groups. Liver tissues were collected at 6, 12, 19, and 25 weeks after inoculation. Paired non-infected mouse-derived liver tissues were used as controls, and transcriptome sequencing was carried out. Results: A total of 629 differentially expressed genes (DEGs) were identified. Among them, 370 genes were upregulated and 259 genes were downregulated. Moreover, Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analyses indicated that these DEGs were significantly associated with immune system modulation, the cell cycle, and the fibrosis process during the pathological changes. Additionally, weighted gene co-expression network analysis (WGCNA) identified several genes, including CCNA2, BIRC5, KIF2C, OTC, TLR2, and NCKAP1L. These hub genes involved in immunoinflammatory processes may be related to E. multilocularis larvae infection. Conclusions: The findings of this research provide a theoretical foundation for a more in-depth understanding of the molecular mechanisms of AE. They offer valuable insights into the molecular mechanisms and potential key factors involved in the pathogenesis of this disease. Full article

The report of the first room-temperature, ambient-pressure superconductivity in copper-doped lead apatite Pb_10−xCu_x(PO₄)₆O has attracted lots of attention. However, subsequent studies revealed the presence of numerous impurity phases in the polycrystalline sample, and the sharp superconducting-like transition is not due to a superconducting transition but most likely due to a reduction in resistivity caused by the first-order structural phase transition of Cu₂S at around 385 K from the β phase at high temperature to the γ phase at low temperature. Before now, only bulk measurements have been performed on a Pb_10−xCu_x(PO₄)₆O powder sample, which could be affected by the impurity phases, masking the intrinsic properties of Pb_10−xCu_x(PO₄)₆O. In this study, ³¹P and ^63/65Cu nuclear magnetic resonance (NMR) measurements have been performed on a Pb_10−xCu_x(PO₄)₆O powder sample to investigate its physical properties from a microscopic point of view. Our NMR data evidence the non-magnetic insulating nature of Pb_10−xCu_x(PO₄)₆O without any trace of electron correlation effects. Furthermore, the ^63/65Cu NMR results suggest that no copper or very little copper is substituted for Pb in Pb₁₀(PO₄)₆O prepared by sintering Pb₂SO₅ and Cu₃P. Full article

Conventional trenchless pipeline rehabilitation technologies are primarily designed for circular pipelines, with limited applicability to box culvert structures. Even when adapted, these methods often lead to significant reductions in the effective cross-sectional area and fail to enhance the structural load-bearing capacity due to geometric incompatibilities. To overcome these limitations, this study proposes a novel construction approach that employs prefabricated high-strength thin concrete segment liners for the reinforcement of underground box culverts. The feasibility of this method was validated through full-scale (1:1) experimental construction in a purpose-built test culvert, demonstrating rapid and efficient installation. A static stacking load test was subsequently conducted on the reinforced upper section of the culvert. Results indicate that the proposed reinforcement method effectively restores structural integrity and satisfies load-bearing and serviceability requirements, even after removal of the original roof slab. Additionally, a finite element analysis was performed to simulate the stacking load test conditions. The simulation revealed that variations in the mechanical properties of the grout between the existing structure and the new lining had minimal impact on the internal force distribution and deformation behavior of the prefabricated segments. The top segment consistently exhibited semi-rigid fixation behavior. This study offers a promising strategy for the rehabilitation of urban underground box culverts, achieving structural performance recovery while minimizing traffic disruption and enhancing construction efficiency. Full article

This study investigated the effects of curdlan (CUR) with different helical conformations on the gelling behavior and mechanisms of heat-induced soy protein isolate (SPI) gels. The results demonstrated that CUR significantly improved the functional properties of SPI gels, including water-holding capacity (0.31–5.06% increase), gel strength (7.01–240.51% enhancement), textural properties, viscoelasticity, and thermal stability. The incorporation of CUR facilitated the unfolding and cross-linking of SPI molecules, leading to enhanced network formation. Notably, SPI composite gels containing CUR with an ordered triple-helix bundled structure exhibited superior gelling performance compared to other helical conformations, characterized by a more compact and uniform microstructure. This improvement was attributed to stronger hydrogen bonding interactions between the triple-helix CUR and SPI molecules. Furthermore, the entanglement of triple-helix CUR with SPI promoted the formation of a denser and more homogeneous interpenetrating polymer network. These findings indicate that triple-helix CUR is highly effective in optimizing the gelling characteristics of heat-induced SPI gels. This study provides new insights into the structure–function relationship of CUR in SPI-based gel systems, offering potential strategies for designing high-performance protein–polysaccharide composite gels. The findings establish a theoretical foundation for applications in the food industry. Full article

Background: The stress hyperglycemia ratio (SHR) has emerged as a promising biomarker for assessing stress-induced hyperglycemia (SH) but has not been evaluated in patients with acute pancreatitis (AP). This study investigates the role of the SHR in predicting adverse clinical outcomes in patients with AP. Methods: Adult patients with AP who were admitted within 72 h of the onset of abdominal pain were screened in the database. Eligible patients with glycated hemoglobin (HbA1c) and blood glucose were analyzed. The SHR was calculated using admission blood glucose and HbA1c levels. Patients were categorized into four groups: SHR1 (≤1.03), SHR2 (1.04–1.25), SHR3 (1.26–1.46), and SHR4 (≥1.47). The primary outcome was persistent organ failure (POF). The secondary outcomes included acute peripancreatic fluid collection (APFC) and high-dependency unit/intensive care unit (HDU/ICU) admission. Restricted cubic spline (RCS) analysis was used to assess nonlinear associations and identify SHR threshold values. Univariable and multivariable logistic regression models were used to adjust for potential confounders and evaluate the relationship between the SHR and clinical outcomes. Results: A total of 486 patients with AP were included in this study, comprising 85 with POF and 401 without POF. SHR levels and severity were significantly correlated, with the highest quartile in the greatest proportion of severe acute pancreatitis (SAP). Higher SHR levels were significantly associated with an increased risk of POF, APFC, and HDU/ICU admission. RCS analysis revealed a nonlinear relationship between the SHR and APFC (p = 0.009). Based on the RCS and quartile analysis, SHR > 1.25 was identified as the threshold for increased risk. After adjusting for confounders, SHR > 1.25 remained independently associated with higher risks of POF (OR: 2.49, 95% CI: 1.39–4.46, p = 0.002), APFC (OR: 2.85, 95% CI: 1.92–4.24, p < 0.001), and ICU admission (OR: 1.74, 95% CI: 1.12–2.69, p = 0.013). Conclusions: The SHR is independently associated with adverse clinical outcomes in AP, including POF, APFC, and HDU/ICU admission. These findings suggest that the SHR may serve as a valuable biomarker for risk stratification and early intervention in AP management. Full article

Electrocoagulation is rapidly gaining prominence in wastewater treatment due to its capabilities and less reliance on additional chemicals. While a lot of research efforts have been focused on the influence of the anode material, power supply, and reactor design, the contribution of the cathode to contaminant removal has been less explored. In this study, we investigated the performance of stainless steel (SS-304) and aluminium (Al-6061) electrodes in both similar and dissimilar configurations for a 120 min electrocoagulation treatment of spent machinery coolant. The anode–cathode configurations, including SS-SS, Al-Al, SS-Al and Al-SS, have been investigated. Additionally, we examined the effects of the initial pH and agitation methods on the process performance. Our findings indicated that the type of cathode could significantly affect the floc formation and contaminant removal. Notably, the combination of an Al anode and SS cathode (Al(A)-SS(C)) demonstrated a synergistic improvement in the Chemical Oxygen Demand (COD), with a removal of 84.3% within a short treatment time (<20 min). The final COD removal of 91.4% was achieved with a turbidity level close to 12 Nephelometric Turbidity Units (NTU). The Al anode readily released the Al ions and formed light flocs at the early stage of electrocoagulation, while the SS cathode generated heavy Fe hydroxides that mitigated the flotation effect. These results demonstrated the cathode’s significant contribution in electrocoagulation, leading to potential savings in the treatment time required. Full article

Tea has become one of the most popular drinks worldwide thanks to its pleasant sensory attributes and diverse health benefits. However, tannin-rich compositions have several negative effects and significantly impact the quality of tea beverages. Among various detannification methods, tannase treatment appears to be the most secure and environmentally friendly strategy. Although numerous microbial tannases have been identified and used in food processing, they are predominantly mesophilic with compromised heat tolerance, which limit their application in high-temperature tea extraction processing. Computer-assisted rational design and site-directed mutagenesis has emerged as a promising strategy in enzyme engineering to improve the thermostability of industrial enzymes. Nevertheless, relevant studies for tannase thermostability improvement remain lacking. In the present study, a novel thermophilic tannase called TanPL1 from marine fungus Penicillium longicatenatum strain SM102 was expressed in the food-grade host Yarrowia lipolytica. After purification and characterization, the thermostability of this enzyme was improved through site-directed mutagenesis guided by computer-aided rational design and molecular dynamics simulations. Then the thermostable mutant MuTanPL1 was applied in green tea processing for both polyphenol extraction and ester catechin hydrolysis. The tannase yield and specific activity values of 166.4 U/mL and 1059.3 U/mg, respectively, were achieved. The optimum pH and temperature of recombinant TanPL1 were determined to be 5.5 and 55 °C, respectively, and the enzyme exhibited high activity toward various gallic acid ester substrates. The site-directed mutagenesis method successfully generated a single-point mutant, MuTanPL1, with significantly enhanced thermostability and a higher optimum temperature of 60 °C. After 2 h of detannification by MuTanPL1, nearly all gallated catechins in green tea infusion were biotransformed. This resulted in a 202.4% and 12.1-fold increase in non-ester catechins and gallic acid levels, respectively. Meanwhile, the quality of the tea infusion was also markedly improved. Sensory evaluation and antioxidant activity assays revealed notable enhancements in these properties, while turbidity was reduced considerably. Additionally, the α-amylase inhibition activity of the tannase-treated tea infusion declined from 50.49% to 8.56%, revealing a significantly lower anti-nutritional effect. These findings suggest that the thermostable tannase MuTanPL1 holds strong application prospects in tea beverage processing. Full article

Mn²⁺ doped metal halide that can be grown by a facile solution reaction is a promising low-cost afterglow material. However, the afterglow mechanism is still elusive. Using a facile method to modulate afterglow time is still to be explored. In this work, we reveal that the afterglow of Cs₂Na_0.2Ag_0.8InCl₆:y%Mn can be significantly modulated by Mn²⁺ concentration. We propose that replacing Ag⁺ with Mn²⁺ leads to the appearance of interstitial Ag⁺, which temporally store the photogenerated electrons (${\mathrm{A}\mathrm{g}}^{+}+{\mathrm{e}}^{-}\to \mathrm{A}\mathrm{g}$). After the removal of excitation, the gradual recombination between residual holes and stored electrons [${\mathrm{h}}^{+}+\left({\mathrm{A}\mathrm{g}}^{+}+{\mathrm{e}}^{-}\right)\to \mathrm{h}\mathsf{\nu }+{\mathrm{A}\mathrm{g}}^{+}$] explains the afterglow. However, excessive Mn²⁺ doping at interstitial sites does not bring about more interstitial Ag⁺ but instead introduces nonradiative traps. Therefore, as the Mn²⁺ concentration increases, the afterglow time increases from 350 s to 530 s and then decreases to 230 s, reaching a maximum at y = 40. Thus, a dynamic optical information storage and encryption application is demonstrated based on the modulated afterglow time. Full article