sustainability-logo

Journal Browser

Journal Browser

Special Issue "Energy and Cost-Effective Building Construction and Renovation Combining New Solutions, Renewables, and Waste Heat"

A special issue of Sustainability (ISSN 2071-1050). This special issue belongs to the section "Resources and Sustainable Utilization".

Deadline for manuscript submissions: 31 January 2024 | Viewed by 2419

Special Issue Editors

Faculty of Environmental Engineering, Wroclaw University of Science and Technology, Wybrzeże Wyspiańskiego 27, 50-370 Wroclaw, Poland
Interests: heat-recovery technologies; renewable thermal technologies; radiant heating; drain-water installations; water and sewage installations; balneology; balneotechnology; thermal comfort
Institute of Environmental Engineering and Builiding Installations, Poznan University of Technology, Poznan, Poland
Interests: energy efficiency in budilings; heating ventilation and air conditioning; applied thermodynamics; heat exchangers; heat recovery; decentralized ventilation systems; thermal performance of buildings; surface heating/cooling systems; Renewable Energy Sources; CFD simulations; experimental thermal and flow charactersitics
Special Issues, Collections and Topics in MDPI journals
Department of Indoor and Qutdoor Air Quality, Faculty of Environmental Engineering, Lublin University of Technology, 20-618 Lublin, Poland
Interests: HVAC systems analysis, optimization and control; energy efficiency in buildings; radiant heating/cooling; heat cost allocation in buildings; renewable energy use/integration in buildings
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

Globally relevant scientific and research topics, as well as experience gained during a research internship, has led us to address issues related to energy efficiency in buildings from a general and broad perspective. Therefore, we are pleased to introduce this Special Issue of Sustainability, entitled "Energy- and Cost-effective Building Construction and Renovation Combining New Solutions, Renewables, and Waste Heat". This Special Issue will collect scientific papers, case-studies, and review papers on the applications of renewable energy sources, the use of waste energy, and methods of improving energy efficiency in newly constructed or modernized buildings.

We welcome the submission of works addressing energy, economy, and combined issues, in the scope of, but not limited to, the following topics:

  • Heating, cooling, and electricity supply systems for buildings.
  • Building technical equipment systems.
  • Pro-environmental and sustainable techniques for erecting or renovating buildings.
  • Thermal comfort.
  • Effective control of the efficiency of energy supply systems.
  • Energy and its savings.
  • Usage of renewables for heating, cooling, and electricity supply in buildings.
  • New equipment/technologies for energy-efficient and sustainable buildings.
  • HVAC systems.

We welcome submissions from scientists, tertiary-level education staff, and professionals within the following fields: architecture, civil engineering, environmental engineering, electrical engineering, HVAC systems, mechanical engineering, automatization, and controlling engineering. We are pleased to invite you to share your knowledge and experiences related to the energy-efficient renovation of buildings and the construction of energy systems for buildings, focused on the usage of renewable- or waste-heat-derived energies.

We believe this Special Issue will shed new light in the topic of energy- and cost-effective building construction and renovation combining new solutions, renewables, and waste heat.

Dr. Edyta Dudkiewicz
Dr. Łukasz Amanowicz
Dr. Tomasz Cholewa
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Sustainability is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2400 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • energy-saving equipment and technologies
  • thermal comfort
  • renewable sources
  • waste heat
  • thermo-modernization

Published Papers (2 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

19 pages, 2790 KiB  
Article
The Effect of Lowering Indoor Air Temperature on the Reduction in Energy Consumption and CO2 Emission in Multifamily Buildings in Poland
Sustainability 2023, 15(15), 12097; https://doi.org/10.3390/su151512097 - 07 Aug 2023
Viewed by 655
Abstract
This article analyzes the possibility of reducing the energy consumption from building heating as a result of lowering the indoor air temperature, which is recommended as a response to the energy crisis. Various values of the set-point temperature (16–22 °C), as well as [...] Read more.
This article analyzes the possibility of reducing the energy consumption from building heating as a result of lowering the indoor air temperature, which is recommended as a response to the energy crisis. Various values of the set-point temperature (16–22 °C), as well as different scenarios for their changes, were assumed for analysis. Changes in clothing that were determined to maintain the same level of thermal comfort after a temperature change were determined. The associated reduction in CO2 emissions emitted into the atmosphere was determined. The effect of reducing CO2 emissions was studied depending on the type of heating source. Simulation calculations were carried out for an exemplary multifamily building. The effect of different building insulations required in Poland over the years 1964–2022 was considered. Analyses were performed for the climatic conditions of cities located in different climatic zones of Poland: Koszalin, Wroclaw, Warsaw, Bialystok, Suwalki. Depending on the scenario, the insulation standard of the building, and the variant of location, the energy reduction achieved ranges from 6.6%/K to 13.2%/K. Taking into account the type of heating source, the reduction in CO2 emissions is from 0.7 to 7.5 kgCO2/(K·m2). The reduction in temperature by 1 or 2 K can be compensated for by wearing an additional sleeveless vest (0.12 clo) or sweater (0.28 clo). Full article
Show Figures

Figure 1

18 pages, 5663 KiB  
Article
Efficiency Improvement of Eco-Friendly Solar Heat Supply System as a Building Coating
Sustainability 2023, 15(3), 2831; https://doi.org/10.3390/su15032831 - 03 Feb 2023
Cited by 3 | Viewed by 998
Abstract
The background of this article is the potential energy savings of solar heat supply systems due to the use of the renewable energy of solar radiation. The motivation is to create a solar collector design that would combine the functions of both a [...] Read more.
The background of this article is the potential energy savings of solar heat supply systems due to the use of the renewable energy of solar radiation. The motivation is to create a solar collector design that would combine the functions of both a building cover and a solar collector. It is necessary to investigate and compare different types of solar collector coatings (traditional and modern) and pipe diameters. The purpose of the article is to solve aspects of energy efficiency for new eco-friendly solar collectors. The most effective result occurred with the solar collector covered with the rubber–graphite composition of Grafplast PDA, and when using Prandelli/Tuborama pipes with a diameter of 0.016 m. Their efficiency increased by 8% compared to the second version of the collector made using a more traditional solution. The influence of the distance between the pipes and the flow rate of the heat carrier on the efficiency of the solar collectors was evaluated. Full article
Show Figures

Figure 1

Back to TopTop