Reviewer Board
Members of the reviewer board are selected from all Metals reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
Department of Mechanics and Machine Design, Opole University of Technology, 45-758 Opole, Poland
Interests: fatigue of materials; residual stress; explosive welding; friction stir welding
Interests: fatigue of materials; residual stress; explosive welding; friction stir welding
Institute of Nanotechnology, Karlsruhe Institute of Technology, Karlsruhe, Germany
Interests: material characterization; materials mechanical properties; mechanical behavior of materials; microstructure; material characteristics; materials processing; advanced materials; mechanical testing; metals mechanical engineering; materials science; metallurgy
Interests: material characterization; materials mechanical properties; mechanical behavior of materials; microstructure; material characteristics; materials processing; advanced materials; mechanical testing; metals mechanical engineering; materials science; metallurgy
1. Department of Non-Ferrous metals, Irkutsk National Research Technical University, 83 Lermontov St., Irkutsk, Russia
2. International Relations, Baikal State University, 11 Lenin St., Irkutsk, Russia
Interests: Aluminum; aluminum alloys; new promising alloys; foundry; refining of metals and alloys; aluminum powders; metal matrix composite materials; additive technologies; electrical conductivity of aluminum wires; electrochemical oxidation of metals; Thin films
2. International Relations, Baikal State University, 11 Lenin St., Irkutsk, Russia
Interests: Aluminum; aluminum alloys; new promising alloys; foundry; refining of metals and alloys; aluminum powders; metal matrix composite materials; additive technologies; electrical conductivity of aluminum wires; electrochemical oxidation of metals; Thin films
Faculty of Mechanical Engineering, Gdańsk University of Technology, 80-233 Gdańsk, Poland
Interests: welding; weldability; duplex steel; Stainless Steel; cracking; laser welding; FCAW; SAW; mag; hybrid welding; composites; Laminates; degradation
Interests: welding; weldability; duplex steel; Stainless Steel; cracking; laser welding; FCAW; SAW; mag; hybrid welding; composites; Laminates; degradation
Łukasiewisz Research Network, Metal Forming Institute,Jana Pawla II, 14, 61-139 Poznań, Poland
Interests: field assisted sintering technique; spark plasma sintering; finite element modeling; powder metallurgy; porous materials; porous titanium; energy materials; metal forming
Interests: field assisted sintering technique; spark plasma sintering; finite element modeling; powder metallurgy; porous materials; porous titanium; energy materials; metal forming
Department of Civil & Environmental Engineering, North Dakota State University, Fargo, ND 58105, USA
Interests: fibers; bio-composites; finite element analysis; statistical analysis; machine vision; metals; machine learning; data mining.
Interests: fibers; bio-composites; finite element analysis; statistical analysis; machine vision; metals; machine learning; data mining.
Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, Wrocław, Poland
Interests: fatigue; metals; fracture mechanics; failure analysis; fatigue fracture; degradation of metals
Interests: fatigue; metals; fracture mechanics; failure analysis; fatigue fracture; degradation of metals
Department of Materials Science and Non Ferrous Metals Engineering, Faculty of Non Ferrous Metals, AGH University of Science and Technology, 30 Mickiewicza Ave., 30059 Cracow, Poland
Interests: aluminium alloys; metal matrix composites; severe plastic deformation; microstructure examination; bearing alloys; tribological properties; Heat Treatment
Interests: aluminium alloys; metal matrix composites; severe plastic deformation; microstructure examination; bearing alloys; tribological properties; Heat Treatment
Department of Materials Engineering, School of Power and Mechanical Engineering, Wuhan University, Wuhan, China
Interests: Titanium Alloy; Biomedical metal; 3D printing; Heterogenous microstructure; EBSD; ECCI; strength/ductility
Interests: Titanium Alloy; Biomedical metal; 3D printing; Heterogenous microstructure; EBSD; ECCI; strength/ductility
School of Materials and Engineering, Shanghai Jiao Tong University, Shanghai, China
Interests: new materials stamping and its mechanical model; electroplastic forming; superplastic forming/diffusion bonding
Interests: new materials stamping and its mechanical model; electroplastic forming; superplastic forming/diffusion bonding
National Joint Engineering Research Center for Abrasion Control and Molding of Metal Materials, Henan University of Science and Technology, Luoyang 471023, China
Interests: metals; ceramics
Interests: metals; ceramics
School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China
Interests: high-speed grinding technology; machined surface integrity and anti-fatigue; machining technology of high performance materials
Interests: high-speed grinding technology; machined surface integrity and anti-fatigue; machining technology of high performance materials
Faculty of Mechanical Engineering, University of Science and Technology in Bydgoszcz, 7 Kaliskiego St, 85‐796 Bydgoszcz, Poland
Interests: fatigue of materials and structures; experimental methods for determining the strength properties of materials and structures; infrared thermography
Interests: fatigue of materials and structures; experimental methods for determining the strength properties of materials and structures; infrared thermography
State Key Laboratory of Superhard Materials, Jilin University, Changchun 130012, China
Interests: fabrication and characterization of hard metals; superhard materials
Interests: fabrication and characterization of hard metals; superhard materials
School of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, China
Interests: forming and properties of metals; porcess, structure and porperties of titanium-based and aluminium-based alloys; in-situ characterization by SEM or EBSD
Interests: forming and properties of metals; porcess, structure and porperties of titanium-based and aluminium-based alloys; in-situ characterization by SEM or EBSD
College of Electrical, Energy and Power Engineering, Yangzhou University, Yangzhou 225127, China
Interests: soldering; packaging; sintering bonding
Interests: soldering; packaging; sintering bonding
Department of Materials Recycling and Metallurgy, National Center for Metallurgical Researche, Spanish National Research Council (CSIC), 28040 Madrid, Spain
Interests: mineral processing; critical raw materials; resource; recycling and reutilization; waste to energy; materials recycling; pyro and hydrometallurgical processes; electronic scrap; batteries; metallurgical wastes
Interests: mineral processing; critical raw materials; resource; recycling and reutilization; waste to energy; materials recycling; pyro and hydrometallurgical processes; electronic scrap; batteries; metallurgical wastes
Applied Physics II—Faculty of Science and Technology, University of the Basque Country, 48940 Leioa, Spain
Interests: materials science; physical metallurgy; infrared radiometry; shape memory alloy; selectron microscopy; phase transformation; metal; alloys
Interests: materials science; physical metallurgy; infrared radiometry; shape memory alloy; selectron microscopy; phase transformation; metal; alloys
Department of Mechanical Engineering, University of Bath, Bath BA2 7AY, UK
Interests: stress modelling; nanomaterials; X-ray diffraction; neutron diffraction; phase analysis; focused ion beam; residual stress; energy dispersive X-ray spectroscopy; microscopy; micropillar splitting; micropillar compression; microscale characterisation; nanoindentation; atomic force microscopy; process optimisation; surface science; machining; additive manufacture; composites; ceramics; polymers; interfaces; metallurgy; mechanical properties; crystallography
Interests: stress modelling; nanomaterials; X-ray diffraction; neutron diffraction; phase analysis; focused ion beam; residual stress; energy dispersive X-ray spectroscopy; microscopy; micropillar splitting; micropillar compression; microscale characterisation; nanoindentation; atomic force microscopy; process optimisation; surface science; machining; additive manufacture; composites; ceramics; polymers; interfaces; metallurgy; mechanical properties; crystallography
School of Mechanical, Materials and Mechatronic Engineering, University of Wollongong, NSW 2522, Australia
Interests: micro manufacturing; multi-scale simulation; micro forming; hydraulics
Interests: micro manufacturing; multi-scale simulation; micro forming; hydraulics
School of Materials Science and Engineering, Southeast University, Nanjing 211189, China
Interests: the formation, structure and properties of amorphous and nanostructured alloys
Interests: the formation, structure and properties of amorphous and nanostructured alloys
Department of Mechanical and Aerospace Engineering, Tandon School of Engineering, New York University, 6 Metrotech Center, Brooklyn, NY 11201, USA
Interests: material science; molecular dynamics; composite materials; finite element method; numerical methods; material characterization; characterization; 3D printing; syntactic foams; light-weight materials
Interests: material science; molecular dynamics; composite materials; finite element method; numerical methods; material characterization; characterization; 3D printing; syntactic foams; light-weight materials
Department of Metal Production and Processing, SINTEF Industry, 0314 Oslo, Norway
Interests: computational materials; computational mechanics; data analytics; deformation processing; crystal plasticity
Interests: computational materials; computational mechanics; data analytics; deformation processing; crystal plasticity
School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu 610031, China
Interests: static/dynamic mechanical behavior; titanium alloys; phase transformation; gradient/heterogeneous structure; mechanical properties
Interests: static/dynamic mechanical behavior; titanium alloys; phase transformation; gradient/heterogeneous structure; mechanical properties
Department of Mechanical Engineering, McMaster University, 1280 Main Street West, Hamilton, ON L8S 4L7, Canada
Interests: additive manufacturing (metals/polymers); Selective Laser Melting; post-processing (heat treatment, friction stir processing, shot, and shock peening); materials characterization; CAD/CAM/CAE-laser system engineering
Interests: additive manufacturing (metals/polymers); Selective Laser Melting; post-processing (heat treatment, friction stir processing, shot, and shock peening); materials characterization; CAD/CAM/CAE-laser system engineering
Department of Rail Vehicles and Transport, Cracow University of Technology, 31-155 Kraków, Poland
Interests: machining processes (conventional and nonconventional); manufacturing processes; machining; electrical discharge machining; electrochemical machining; drilling of high aspect ratio holes; selective laser melting; additive manufacturing
Interests: machining processes (conventional and nonconventional); manufacturing processes; machining; electrical discharge machining; electrochemical machining; drilling of high aspect ratio holes; selective laser melting; additive manufacturing
AGH University of Krakow, Faculty of Metals Engineering and INdustrial Computer Science
al. Mickiewicza 30
30-059 Krakow
Interests: Powder Metallurgy; metal matrix composites; steels; Heat Treatment; Tribology
Interests: Powder Metallurgy; metal matrix composites; steels; Heat Treatment; Tribology
School of Mechanical Engineering, Materials Science, University of Applied Sciences Stralsund, Zur Schwedenschanze 15, 18435 Stralsund, Germany
Interests: magnesium alloys; fatigue; fracture; Stress corrosion; plastic deformation; corrosion morphology; biomaterials; biodegradation; microstructure-mechanical properties relationship; metal matrix composites
Interests: magnesium alloys; fatigue; fracture; Stress corrosion; plastic deformation; corrosion morphology; biomaterials; biodegradation; microstructure-mechanical properties relationship; metal matrix composites
University of Strathclyde
Glasgow, UK
Interests: Tribology; coating; forging; material characterisation; Superplastic Forming; Aerospace alloys
Interests: Tribology; coating; forging; material characterisation; Superplastic Forming; Aerospace alloys
Politecnico di Milano, Dipartimento di Meccanica, Via La Masa 1, 20156 Milano, Italy
Interests: ironmaking and steelmaking; applied metallurgy; plastic deformation of metals
Interests: ironmaking and steelmaking; applied metallurgy; plastic deformation of metals
