energies-logo

Journal Browser

Journal Browser

Research and Development Progress in Oil Shale II

A special issue of Energies (ISSN 1996-1073). This special issue belongs to the section "H: Geo-Energy".

Deadline for manuscript submissions: closed (28 June 2023) | Viewed by 2781

Special Issue Editors


E-Mail Website
Guest Editor
1. Energy Technologies, University of Vaasa, P.O. Box 700, FIN-65101 Vaasa, Finland
2. Civil Engineering, Aalto University, P.O. Box 11000, FIN-02130 Espoo, Finland
Interests: energy efficient low carbon buildings; heat recovery technologies; demand control ventilation; heat and moisture transfer in buildings; indoor air quality; renewable energies; thermal energy storage; unconventional energy (gas hydrate, oil shale); smart cities
Special Issues, Collections and Topics in MDPI journals

E-Mail Website
Guest Editor
National-Local Joint Engineering Laboratory of in Situ Conversion, Drilling and Exploitation Technology for Oil Shale, Jilin University, Jilin 130021, China
Interests: natural gas hydrate drilling; underground oil shale
Special Issues, Collections and Topics in MDPI journals

E-Mail Website
Guest Editor
College of Earth Sciences, Jilin University, Changchun 130021, China
Interests: mineral census; mineralogy; petrology
Special Issues, Collections and Topics in MDPI journals

E-Mail Website
Guest Editor
College of Construction Engineering, Jilin University, Changchun 130021, China
Interests: oil shale; synthesis of polymer materials; in-situ mining
Special Issues, Collections and Topics in MDPI journals

E-Mail Website
Guest Editor
College of Construction Engineering, Jilin University, Jilin 130021, China
Interests: oil shale; kinetic analysis; thermogravimetric
Special Issues, Collections and Topics in MDPI journals

E-Mail Website
Guest Editor
Key Laboratory of In-Situ Property-Improving Mining of Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China
Interests: oil shale; coupling theory; in-situ conversion
Special Issues, Collections and Topics in MDPI journals
College of Construction Engineering, Jilin University, Jilin 130021, China
Interests: energy storage; biomimetic drilling technology; energy transfer and rock fragmentation mechanisms in geological engineering
Special Issues, Collections and Topics in MDPI journals

E-Mail Website
Guest Editor
School of Energy and Power Engineering, Northeast Electric Power University, Jilin 132012, China
Interests: oil shale; semi-coke combustion; semi-coke power generation
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

Oil shale is an unconventional oil and gas resource that is listed as an especially important alternative energy resource in the 21st century for its rich resources and the feasibility of development and utilization. Due to the increasing demand for energy, theoretical research, exploration, exploitation, and utilization of oil shale have achieved fruitful results but also faced challenges. With the successful tests of high value-added utilization technology and in situ conversion technology of oil shale, oil shale scale development and utilization have shown broad potential for use in future fuels. In this Special Issue, we invite authors to submit original research and review articles addressing the geology, genesis, exploration, evaluation, mining, methods of processing and combustion, in situ conversion, economics and utilization of oil shale, as well as issues of environment problems.

Topics of interest for publication in this Special Issue include but are not limited to:

  • Genesis and metallogenic mechanism;
  • Exploration and resource evaluation;
  • Mining technology;
  • Composition and characteristics of oil shale;
  • Processing and combustion;
  • Economics and comprehensive utilization;
  • In situ conversion technology and challenges;
  • Oil shale’s environmental issues and challenges;
  • Socioeconomic impact and policy.

Dr. Xiaoshu Lu
Prof. Dr. Wei Guo
Prof. Dr. Qingtao Meng
Dr. Sunhua Deng
Dr. Fengtian Bai
Dr. Zhiqin Kang
Dr. Yan Zhao
Prof. Dr. Jingru Bai
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Energies is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2600 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • oil shale
  • kerogen
  • pyrolysis
  • combustion
  • retorting
  • in situ conversion
  • oil shale ash

Published Papers (3 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

15 pages, 7143 KiB  
Article
Suitability Analysis of the Deformation Behavior of Metal Corrugated Casing in High-Temperature Wellbore
by Siqi Ren, Jing Zhao, Zhiqin Kang, Guoying Wang and Dong Yang
Energies 2023, 16(16), 5966; https://doi.org/10.3390/en16165966 - 13 Aug 2023
Viewed by 662
Abstract
The stability of the casing is a crucial prerequisite for implementing the in situ high-temperature steam injection method in oil shale reservoirs. In order to address the issues of substantial expansion, concentrated thermal stresses, and susceptibility to damage observed in traditional straight casings [...] Read more.
The stability of the casing is a crucial prerequisite for implementing the in situ high-temperature steam injection method in oil shale reservoirs. In order to address the issues of substantial expansion, concentrated thermal stresses, and susceptibility to damage observed in traditional straight casings under high temperatures, this paper proposes the utilization of a corrugated casing structure. In this regard, to investigate the impact of the shape and structure of the wellbore casing on its mechanical properties, identical corrugated and straight casings were selected and studied. Uniaxial compression and tensile tests were conducted on the casings, along with coordination deformation experiments between the casing and cement sheath under varying temperatures. Numerical simulations were employed to obtain the deformation characteristics of the corrugated and straight casings under axial compression and tension loads, as well as the stress distribution on the outer casing wall. The results showed that when subjected to the same amount of deformation under axial loading, the corrugated casing experienced lower compressive and tensile loads compared to the straight casing. Moreover, under the sole constraint of cement sheath, increasing the temperature led to lower vertical strains (perpendicular to the ground) at all measuring points of the corrugated casing as compared to the corresponding strains in the straight casing. Numerical simulations revealed that, under the same temperatures, the deformation at the interface between the corrugated casing and the cement sheath was smaller, while the vertical stress at the interface of the corrugated casing was also lower than the straight casing. Overall, the corrugated casing, with its corrugated structure that enabled micro-deformation, effectively mitigated the axial deformation of the casing caused by thermal expansion. Consequently, the corrugated casing reduced the extrusion of wellbore casing on the cement sheath, thereby preserving the integrity and stability of the wellbore cementing structure. Full article
(This article belongs to the Special Issue Research and Development Progress in Oil Shale II)
Show Figures

Figure 1

0 pages, 5623 KiB  
Article
A Method for the Modified Estimation of Oil Shale Mineable Reserves for Shale Oil Projects: A Case Study
by Sergei Sabanov, Abdullah Rasheed Qureshi, Zhaudir Dauitbay and Gulim Kurmangazy
Energies 2023, 16(16), 5853; https://doi.org/10.3390/en16165853 - 08 Aug 2023
Cited by 1 | Viewed by 1056
Abstract
The amount if oil shale resources throughout the world has been roughly estimated in accordance with various resource estimation methods. However, in some instances, detailed and comprehensive supporting methodologies for the estimation of commercial shale oil reserves have not been presented. The goal [...] Read more.
The amount if oil shale resources throughout the world has been roughly estimated in accordance with various resource estimation methods. However, in some instances, detailed and comprehensive supporting methodologies for the estimation of commercial shale oil reserves have not been presented. The goal of this study is to develop a comprehensive method for the modified estimation of oil shale mineable reserves for shale oil projects. The methodology characterises oil shale according to its calorific value, oil content, conditional organic mass, and ash content by utilising a Monte Carlo simulation. Based on the results of the case study, the developed method proposes considering the relationships of the in situ oil shale grade and tonnage material (oil shale + limestone) to the oil retorting feed material grade and tonnage by taking into account the retorting plant oil recovery. For this purpose, a Monte Carlo stochastic modelling algorithm was developed. Based on the data analysis, a modifying factor to convert mineral reserves to petroleum reserves was produced. The results of this study are useful for feasibility studies that estimate oil shale reserves in relation to justifying their utilisation fields. Some oil shale deposits have good potential for development but need to be re-estimated in accordance with the most sophisticated extraction and processing technologies. Full article
(This article belongs to the Special Issue Research and Development Progress in Oil Shale II)
Show Figures

Figure 1

16 pages, 5109 KiB  
Article
Characteristics of Oil Shale Quality and Prospects for Comprehensive Development and Utilization in the Dalianhe Coal Mining Area, Northeastern China
by Zhixun Liu, Hao Ran, Heping Yang, Shunyu Yao and Cheng Ma
Energies 2023, 16(13), 5069; https://doi.org/10.3390/en16135069 - 30 Jun 2023
Viewed by 761
Abstract
Oil shale is an important unconventional oil and gas resource, but it is poorly utilized in the Dalianhe coal mining area, northeastern China. Systematic sampling and test analysis were used to evaluate the characteristics of oil shale quality. The research shows that the [...] Read more.
Oil shale is an important unconventional oil and gas resource, but it is poorly utilized in the Dalianhe coal mining area, northeastern China. Systematic sampling and test analysis were used to evaluate the characteristics of oil shale quality. The research shows that the oil shale between the middle and lower coal seams in the coal-bearing member is a rich ore with a high oil content, medium calorific value, high ash content, medium volatile content, low moisture, and ultralow sulfur content. The oil shale has good quality and is suitable for low-temperature carbonization for oil refining or low-calorific fuel. The ash content is silicon–aluminum-rich, has low calcium–magnesium, is iron-poor, and has a high ash melting point. The middle oil shale member is a poor ore with low quality. However, there is a dense section of oil shale with a high organic matter content and good quality above the upper coal seam. It is recommended to implement combined mining of coal and oil shale in the mineshaft and to reasonably recover oil shale between the coal seams and oil shale above the upper coal seam to improve the resource utilization rate. Full article
(This article belongs to the Special Issue Research and Development Progress in Oil Shale II)
Show Figures

Figure 1

Back to TopTop