Announcements

We are delighted to share some highly viewed papers on battery design and manufacturing that were published in Batteries (ISSN: 2313-0105) in 2023 and 2024. In addition, some Special Issues on this topic are open for submission. The following is a list of articles and Special Issues that we believe will interest you.

The list of relevant papers can be seen below: 

1. “Engineering Dry Electrode Manufacturing for Sustainable Lithium-Ion Batteries”
by Mohamed Djihad Bouguern, Anil Kumar Madikere Raghunatha Reddy, Xia Li, Sixu Deng, Harriet Laryea and Karim Zaghib
Batteries 2024, 10(1), 39; https://doi.org/10.3390/batteries10010039
Available online: https://www.mdpi.com/2313-0105/10/1/39

2. “A Review of 3D Printing Batteries”
by Maryam Mottaghi and Joshua M. Pearce
Batteries 2024, 10(3), 110; https://doi.org/10.3390/batteries10030110
Available online: https://www.mdpi.com/2313-0105/10/3/110

3. “Trends in Automotive Battery Cell Design: A Statistical Analysis of Empirical Data”
by Steffen Link, Christoph Neef and Tim Wicke
Batteries 2023, 9(5), 261; https://doi.org/10.3390/batteries9050261
Available online: https://www.mdpi.com/2313-0105/9/5/261

4. “Design, Properties, and Manufacturing of Cylindrical Li-Ion Battery Cells—A Generic Overview”
by Sabri Baazouzi, Niklas Feistel, Johannes Wanner, Inga Landwehr, Alexander Fill and Kai Peter Birke
Batteries 2023, 9(6), 309; https://doi.org/10.3390/batteries9060309
Available online: https://www.mdpi.com/2313-0105/9/6/309

5. “Strategies and Challenge of Thick Electrodes for Energy Storage: A Review”
by Junsheng Zheng, Guangguang Xing, Liming Jin, Yanyan Lu, Nan Qin, Shansong Gao and Jim P. Zheng
Batteries 2023, 9(3), 151; https://doi.org/10.3390/batteries9030151
Available online: https://www.mdpi.com/2313-0105/9/3/151

6. “Welding Challenges and Quality Assurance in Electric Vehicle Battery Pack Manufacturing”
by Panagiotis Stavropoulos, Kyriakos Sabatakakis and Harry Bikas
Batteries 2024, 10(5), 146; https://doi.org/10.3390/batteries10050146
Available online: https://www.mdpi.com/2313-0105/10/5/146

7. “The Impact of Structural Pattern Types on the Electrochemical Performance of Ultra-Thick NMC 622 Electrodes for Lithium-Ion Batteries”
by Penghui Zhu, Benjamin Ebert, Peter Smyrek and Wilhelm Pfleging
Batteries 2024, 10(2), 58; https://doi.org/10.3390/batteries10020058
Available online: https://www.mdpi.com/2313-0105/10/2/58

8. “Enhancing Lithium-Ion Battery Manufacturing Efficiency: A Comparative Analysis Using DEA Malmquist and Epsilon-Based Measures”
by Chia-Nan Wang, Fu-Chiang Yang, Nhut T. M. Vo and Van Thanh Tien Nguyen
Batteries 2023, 9(6), 317; https://doi.org/10.3390/batteries9060317
Available online: https://www.mdpi.com/2313-0105/9/6/317

9. “Lithium–Ion Battery Data: From Production to Prediction”
by Marwan Hassini, Eduardo Redondo-Iglesias and Pascal Venet
Batteries 2023, 9(7), 385; https://doi.org/10.3390/batteries9070385
Available online: https://www.mdpi.com/2313-0105/9/7/385

10. “A Review on Design Parameters for the Full-Cell Lithium-Ion Batteries”
by Faizan Ghani, Kunsik An and Dongjin Lee
Batteries 2024, 10(10), 340; https://doi.org/10.3390/batteries10100340
Available online: https://www.mdpi.com/2313-0105/10/10/340

11. “Concentrated, Gradient Electrolyte Design for Superior Low-Temperature Li-Metal Batteries”
by Jason S. Packard, Ethan A. Adams and Vilas G. Pol
Batteries 2024, 10(12), 448; https://doi.org/10.3390/batteries10120448
Available online: https://www.mdpi.com/2313-0105/10/12/448

12. “Transformations of Critical Lithium Ores to Battery-Grade Materials: From Mine to Precursors”
by Sabbir Ahmed, Anil Kumar Madikere Raghunatha Reddy and Karim Zaghib
Batteries 2024, 10(11), 379; https://doi.org/10.3390/batteries10110379
Available online: https://www.mdpi.com/2313-0105/10/11/379

Special Issues:

You are invited to view and submit relevant papers to the journal Batteries at the following link: https://www.mdpi.com/journal/batteries.

Batteries Editorial Office