You are currently viewing a new version of our website. To view the old version click .
Nanomaterials
  • Editorial
  • Open Access

30 May 2023

Synthesis, Development and Characterization of Nanotubes

Department of Exact and Natural Sciences, Institute of Interdisciplinary Research, Alexandru Ioan Cuza University of Iasi, Blvd. Carol I, No. 11, 700506 Iasi, Romania
This article belongs to the Special Issue Growth, Characterization and Applications of Nanotubes
In recent decades, the great demand for device miniaturization has attracted the attention of researchers focused on the growth, modification, properties, and applications of one-dimensional nanostructures, such as nanotubes. Nanotubes are cylindrical structures with diameters of 1–100 nm. In recent years, nanotubes synthesized from different types of materials (i.e., carbon, CNTs; titanium, NTAs; and tellurium, TeNTs) have been selected as promising alternative materials for various applications based on their characteristic properties. CNTs are electrically insulating, semiconducting, or exhibit metallic conductance; NTAs have a large area/volume ratio and fast electron transport, as well as a low recombination rate of charge carriers, which enable increased photocatalytic efficiency and durability; and TeNTs exhibit a tunable bandgap, high carrier mobility, and high thermal conductivity. The variety of applications covered by the eight articles published in the Special Issue is proof of the growing attention paid to the use of nanotube materials for electronic devices, photocatalytic devices, environmental electronics devices, biosensors, etc.
In this Special Issue, the research articles are focused on the following:
Carbon nanotubes: when combined with Pd nanoparticles loaded onto Co3O4, they serve as a promising cathode catalyst for enhancing the electrocatalytic activity and oxygen reduction reaction at the cathode in direct urea fuel cells []; they decrease the incidence and severity of A. solani, and increase the fruit yield of tomato crop and dry shoot biomass []; they are used as electromechanical sensing devices when doped with resins []; they are used for the non-covalent functionalization and dispersion of two different S-layer proteins for the development of novel materials, such as biosensors []; when coupled with reduced graphene oxide (rGO) on a Si substrate, they lead to the formation of electrically conductive nanostructures for interconnections in nanoelectronics []; when properly dispersed in a liquid crystal matrix, they present dielectric properties considerably different from those of the pure liquid crystal [].
Titania nanotubes: the defect creation within the tube walls and the changes in surface morphology after ion bombardment constitute a versatile tool to achieve well-defined and tunable topographies and distinct surface characteristics [].
Tellurium nanotubes: due to their tunable bandgap, high carrier mobility, high thermal conductivity, and in-plane anisotropy, they are proven to be versatile and applicable in sensing and decontamination, energy storage, catalysts, and can form heterostructures with other nanomaterials [].
The obtained results are expected to be useful for researchers working in the field of nanotubes.

Acknowledgments

The guest editor acknowledges all the contributing authors for submitting their valuable research to this Special Issue and thanks to all referees for reviewing the manuscripts.

Conflicts of Interest

The author declares no conflict of interest.

References

  1. Tuyen, N.; Kim, H.; Yoon, Y. Effect of Co3O4 Nanoparticles on Improving Catalytic Behavior of Pd/Co3O4@MWCNT Composites for Cathodes in Direct Urea Fuel Cells. Nanomaterials 2021, 11, 1017. [Google Scholar] [CrossRef] [PubMed]
  2. González-García, Y.; Cadenas-Pliego, G.; Alpuche-Solís, Á.; Cabrera, R.; Juárez-Maldonado, A. Carbon Nanotubes Decrease the Negative Impact of Alternaria solani in Tomato Crop. Nanomaterials 2021, 11, 1080. [Google Scholar] [CrossRef] [PubMed]
  3. Cortés, A.; Sánchez-Romate, X.; Jiménez-Suárez, A.; Campo, M.; Esmaeili, A.; Sbarufatti, C.; Ureña, A.; Prolongo, S. Complex Geometry Strain Sensors Based on 3D Printed Nanocomposites: Spring, Three-Column Device and Footstep-Sensing Platform. Nanomaterials 2021, 11, 1106. [Google Scholar] [CrossRef] [PubMed]
  4. Breitwieser, A.; Sleytr, U.; Pum, D. A New Method for Dispersing Pristine Carbon Nanotubes Using Regularly Arranged S-Layer Proteins. Nanomaterials 2021, 11, 1346. [Google Scholar] [CrossRef] [PubMed]
  5. Gerasimenko, A.; Kuksin, A.; Shaman, Y.; Kitsyuk, E.; Fedorova, Y.; Sysa, A.; Pavlov, A.; Glukhova, O. Electrically Conductive Networks from Hybrids of Carbon Nanotubes and Graphene Created by Laser Radiation. Nanomaterials 2021, 11, 1875. [Google Scholar] [CrossRef] [PubMed]
  6. Petrescu, E.; Cirtoaje, C. Electric Properties of Multiwalled Carbon Nanotubes Dispersed in Liquid Crystals and Their Influence on Freedericksz Transitions. Nanomaterials 2022, 12, 1119. [Google Scholar] [CrossRef]
  7. Kupferer, A.; Mensing, M.; Lehnert, J.; Mändl, S.; Mayr, S. Carbon and Neon Ion Bombardment Induced Smoothing and Surface Relaxation of Titania Nanotubes. Nanomaterials 2021, 11, 2458. [Google Scholar] [CrossRef]
  8. Liu, C.; Wang, R.; Zhang, Y. Tellurium Nanotubes and Chemical Analogues from Preparation to Applications: A Minor Review. Nanomaterials 2022, 12, 2151. [Google Scholar] [CrossRef] [PubMed]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.