The authors wish to make the following corrections to this paper [] in Section 2.2, Equation (19). The authors wish to replace:
Alternatively, the following equation is an empirical fit for that is valid for and
with a mean error of 1.7% and a maximum error of 5.9%:
While Equation (19) is only valid for aspect ratios not exceeding 50, the value of from Equations (16)–(18) in the limit for infinite aspect ratio () is zero.
with:
Alternatively, the following equation is an empirical fit for that is valid for any aspect ratio and , with a mean error of 1.9% and a maximum error of 7.9% for :
In the limit for infinite aspect ratio (), the low-frequency approximation of obtained from Equations (16)–(19) is zero.
The authors would like to apologize for any inconvenience caused to the readers by these changes.
Reference
- Persoons, T.; Cressall, R.; Alimohammadi, S. Validating a Reduced-Order Model for Synthetic Jet Actuators Using CFD and Experimental Data. Actuators 2018, 7, 67. [Google Scholar] [CrossRef]
© 2019 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).