Correction: Zhou, J.; et al. Experimental Performance Study of a High Speed Oil Lubricated Polymer Thrust Bearing. Lubricants 2015, 3, 3–13

Jie Zhou; Barry Blair; John Argires; Donald Pitsch

doi:10.3390/lubricants5040040

,

and

Waukesha Bearings, W231N2811 Roundy Circle East, Suite 200, Pewaukee, WI 53072, USA

^*

Author to whom correspondence should be addressed.

Lubricants2017, 5(4), 40;https://doi.org/10.3390/lubricants5040040

Version Notes

Order Reprints

The authors wish to make the following corrections to this paper [1]. In Table 2, the tensile strength (100 °C) of Babbitt is 40 MPa, not 45 MPa. The thermal conductivity of Babbitt is 55 W/mK, not 3.36 W/mK.

Table 2. Material properties.

Here, we supply the corrected Table.

The authors apologize for any inconvenience caused by the error. The manuscript will be updated online and the previous version will remain available on the article webpage.

References

Zhou, J.; Blair, B.; Argires, J.; Pitsch, D. Experimental Performance Study of a High Speed Oil Lubricated Polymer Thrust Bearing. Lubricants 2015, 3, 3–13. [Google Scholar] [CrossRef]

© 2017 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).

Properties	Babbitt	PEEK
Density, kg/m³	7400	1450
Modulus, GPa	52.4	12.5
Tensile Strength (20 °C), MPa	77	140
Tensile Strength (100 °C), MPa	40	106
Metling Point, °C	241	343
Thermal Conductivity, W/mK	55	0.87
Specific Heat, kJ/kgK	0.23	1.8

Correction: Zhou, J.; et al. Experimental Performance Study of a High Speed Oil Lubricated Polymer Thrust Bearing. Lubricants 2015, 3, 3–13

References

Article Metrics

Citations

Article Access Statistics