You are currently viewing a new version of our website. To view the old version click .
Micromachines
  • Correction
  • Open Access

2 April 2018

Correction: Athanasiou, C.-E. et al. A Monolithic Micro-Tensile Tester for Investigating Silicon Dioxide Polymorph Micromechanics, Fabricated and Operated Using a Femtosecond Laser. Micromachines, 2015, 6, 1365–1386

and
Galatea lab, STI/IMT, Ecole Fédérale Polytechnique de Lausanne (EPFL), Rue de la Maladière, 71b, CH-2002 Neuchâtel, Switzerland
*
Author to whom correspondence should be addressed.
This article belongs to the Special Issue Laser Micromachining and Microfabrication
The authors would like to make the following changes to the published paper [1]: Equation (5) should be written as follows:
F 6 w t E s i o 2 δ 4 3 δ l 3 6 w l 3 c o t h 3 2 ( δ w )
Equation (13) should be written as follows:
u σ = ( 1 C t ) 2 u R 2 + ( R C t 2 ) 2 u t 2
The changes do not affect the scientific results. We apologize for any inconvenience caused to the readers by these errors. The manuscript will be updated and the original will remain online on the article webpage, with a reference to this Correction.

Reference

  1. Athanasiou, C.E.; Bellouard, Y. A Monolithic Micro-Tensile Tester for Investigating Silicon Dioxide Polymorph Micromechanics, Fabricated and Operated Using a Femtosecond Laser. Micromachines 2015, 6, 1365–1386. [Google Scholar] [CrossRef]

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.