Next Article in Journal
Application of a Generalized Utility Function to Determine the Optimal Composition of Geopolymer Mortar
Previous Article in Journal
Nondestructive Monitoring of Textile-Reinforced Cementitious Composites Subjected to Freeze–Thaw Cycles
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Khazi et al. Influence of Bath Hydrodynamics on the Micromechanical Properties of Electrodeposited Nickel-Cobalt Alloys. Materials 2021, 14, 3898

1
Institute for Microsystems Technology (iMST), Faculty of Mechanical & Medical Engineering, Robert Gerwig-Platz 1, 78120 Furtwangen im Schwarzwald, Germany
2
Department of Microsystems Engineering (IMTEK), University of Freiburg, Georges-Köhler-Allee 103, 79110 Freiburg im Breisgau, Germany
3
Associated to the Faculty of Engineering, University of Freiburg, 79110 Freiburg im Breisgau, Germany
*
Author to whom correspondence should be addressed.
Materials 2024, 17(24), 6234; https://doi.org/10.3390/ma17246234
Submission received: 29 November 2024 / Accepted: 2 December 2024 / Published: 20 December 2024
There was an error in the original publication [1]. The relative percentage change values for the microhardness increase as function of bath hydrodynamics for nickel–cobalt alloys should be 76% instead of 43% and for nickel coatings should be 49% instead of 33%.
In the Abstract, 43% has been changed to 76% and 33% has been changed to 49%.
In Section 4.5., Microhardness Characterization of eNi and eNiCo Alloy Samples, paragraph 1, 33% has been changed to 49% and 44% has been changed to 76%.
In Section 5.2., Physical Effects of BHD on Nucleation and Growth Kinetics during ECD, paragraph 4, 43% has been changed to 76% and 33% has been changed to 49%.
In Section 6., Conclusions, paragraph 1, 43% has been changed to 76% and 33% has been changed to 49%.
Since the corresponding author’s original email address and telephone number are no longer in use, the telephone number has been updated to “+49-1590-4852-181”, and the email address has been updated to “isman.khazi@imtek.uni-freiburg.de”.
The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Reference

  1. Khazi, I.; Mescheder, U.; Wilde, J. Influence of Bath Hydrodynamics on the Micromechanical Properties of Electrodeposited Nickel-Cobalt Alloys. Materials 2021, 14, 3898. [Google Scholar] [CrossRef] [PubMed]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Khazi, I.; Mescheder, U.; Wilde, J. Correction: Khazi et al. Influence of Bath Hydrodynamics on the Micromechanical Properties of Electrodeposited Nickel-Cobalt Alloys. Materials 2021, 14, 3898. Materials 2024, 17, 6234. https://doi.org/10.3390/ma17246234

AMA Style

Khazi I, Mescheder U, Wilde J. Correction: Khazi et al. Influence of Bath Hydrodynamics on the Micromechanical Properties of Electrodeposited Nickel-Cobalt Alloys. Materials 2021, 14, 3898. Materials. 2024; 17(24):6234. https://doi.org/10.3390/ma17246234

Chicago/Turabian Style

Khazi, Isman, Ulrich Mescheder, and Jürgen Wilde. 2024. "Correction: Khazi et al. Influence of Bath Hydrodynamics on the Micromechanical Properties of Electrodeposited Nickel-Cobalt Alloys. Materials 2021, 14, 3898" Materials 17, no. 24: 6234. https://doi.org/10.3390/ma17246234

APA Style

Khazi, I., Mescheder, U., & Wilde, J. (2024). Correction: Khazi et al. Influence of Bath Hydrodynamics on the Micromechanical Properties of Electrodeposited Nickel-Cobalt Alloys. Materials 2021, 14, 3898. Materials, 17(24), 6234. https://doi.org/10.3390/ma17246234

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop