Sensors, Volume 24, Issue 9

Detection and characterization of hidden defects, impurities, and damages in homogeneous materials like aluminum die casting materials, as well as composite materials like Fiber–Metal Laminates (FML), is still a challenge. This work discusses m...

Shoulder pain represents the most frequently reported musculoskeletal disorder, often leading to significant functional impairment and pain, impacting quality of life. Home-based rehabilitation programs offer a more accessible and convenient solution...

Open Hardware-based microcontrollers, especially the Arduino platform, have become a comparably easy-to-use tool for rapid prototyping and implementing creative solutions. Such devices in combination with dedicated front-end electronics can offer low...

The calculation of land surface temperatures (LSTs) via low-altitude thermal infrared remote (TIR) sensing images at a block scale is gaining attention. However, the accurate calculation of LSTs requires a precise determination of the range of variou...

With the continuous advancement of autonomous driving and monitoring technologies, there is increasing attention on non-intrusive target monitoring and recognition. This paper proposes an ArcFace SE-attention model-agnostic meta-learning approach (AS...

For the most popular method of scan formation in Optical Coherence Tomography (OCT) based on plane-parallel scanning of the illuminating beam, we present a compact but rigorous K-space description in which the spectral representation is used to descr...

Low-cost ambient sensors have been identified as a promising technology for monitoring air pollution at a high spatio-temporal resolution. However, the pollutant data captured by these cost-effective sensors are less accurate than their conventional...

Posture analysis is important in musculoskeletal disorder prevention but relies on subjective assessment. This study investigates the applicability and reliability of a machine learning (ML) pose estimation model for the human posture assessment, whi...

Introduction: The choice of materials for covering plantar orthoses or wearable insoles is often based on their hardness, breathability, and moisture absorption capacity, although more due to professional preference than clear scientific criteria. An...

A distributed state observer is designed for state estimation and tracking of mobile robots amidst dynamic environments and occlusions within distributed LiDAR sensor networks. The proposed novel framework enhances three-dimensional bounding box dete...