Search Results (32)

Flexible sensors have emerged as critical interfaces for information exchange between soft biological tissues and machines. Here, we present a dual-mode stretchable sensor system capable of synchronous strain and electromyography (EMG) signal detection, integrated with wireless WIFI transmission for real-time joint movement monitoring. The system consists of two key components: (1) A multi-channel gel electrode array for high-fidelity EMG signal acquisition from target muscle groups, and (2) a novel capacitive strain sensor made of stretchable micro-cracked gold film based on Styrene Ethylene Butylene Styrene (SEBS) that exhibits exceptional performance, including >80% stretchability, >4000-cycle durability, and fast response time (<100 ms). The strain sensor demonstrates position-independent measurement accuracy, enabling robust joint angle detection regardless of placement variations. Through synchronized mechanical deformation and electrophysiological monitoring, this platform provides comprehensive movement quantification, with data visualization interfaces compatible with mobile and desktop applications. The proposed technology establishes a generalizable framework for multimodal biosensing in human motion analysis, robotics, and human–machine interaction systems. Full article

Flexible microscale neural interfaces are advancing current strategies for recording and modulating electrical activity in the brain and spinal cord. The aim of this review is to colligate recent progress in thin-film micro-electrocorticography (μECoG) systems and establish a framework for their translation toward spinal bioelectronic implants. We first outline substrate and electrode material design, ranging from polymeric and hydrogel-based materials to nanostructured conductive materials that enable high-fidelity recording on mechanically compliant platforms. We then summarize structural design rules for μECoG arrays, including electrode size, pitch, and channel scaling, and relate these to data-driven μECoG applications in brain–computer interfaces and closed-loop neuromodulation. Bidirectional μECoG architectures for simultaneous stimulation and recording are examined, with emphasis on safe charge injection, electrochemical and thermal limits, and state-of-the-art hardware and algorithmic strategies for stimulation-artifact suppression. Building upon these cortical technologies, we briefly describe adaptation to spinal interfaces, where anatomical constraints demand optimized mechanical properties. Finally, we discuss the convergence of flexible bioelectronics, wireless power and telemetry, and embedded AI decoding as a path toward autonomous, clinically translatable μECoG and spinal neuroprosthetic systems. Ultimately, by synthesizing these multidisciplinary advances, this review provides a strategic roadmap for overcoming current translational barriers and realizing the full clinical potential of soft bioelectronics. Full article

The development of reliable and efficient sensors is essential for advances in health monitoring technologies. This study focused on the fabrication and evaluation of a multichannel printed sensor electrode designed for long-term stability and effective data acquisition. Using rapid printing technology, we created a urine sensor array with extended electrodes for the measurement of urine volume and frequency. The ultrathin design of the sensor electrode, with an average thickness of only 30 microns, ensures both user comfort and measurement accuracy. The sensor electrode dimensions were meticulously designed, measured, and optimized through successful trial manufacturing of the sensor electrode and sensor array. Comprehensive evaluation of the fabricated sensor demonstrated excellent performance, including a high response speed of ≤1 s and long-term stability exceeding 5 weeks. In addition, wireless transmission capabilities and user interfaces were developed for field experiments. Finally, animal experiments were performed to evaluate the field performance of the fabricated sensor. Accordingly, we are confident that the sensor developed herein will contribute to enhancing healthcare in an aging society. Full article

The rapid development of flexible sensor technology has made flexible sensor arrays a key research area in various applications due to their exceptional flexibility, wearability, and large-area-sensing capabilities. These arrays can precisely monitor physical parameters like pressure and strain in complex environments, making them highly beneficial for sectors such as smart wearables, robotic tactile sensing, health monitoring, and flexible electronics. This paper reviews the fabrication processes, operational principles, and common materials used in flexible sensors, explores the application of different materials, and outlines two conventional preparation methods. It also presents real-world examples of large-area pressure and strain sensor arrays. Fabrication techniques include 3D printing, screen printing, laser etching, magnetron sputtering, and molding, each influencing sensor performance in different ways. Flexible sensors typically operate based on resistive and capacitive mechanisms, with their structural designs (e.g., sandwich and fork-finger) affecting integration, recovery, and processing complexity. The careful selection of materials—especially substrates, electrodes, and sensing materials—is crucial for sensor efficacy. Despite significant progress in design and application, challenges remain, particularly in mass production, wireless integration, real-time data processing, and long-term stability. To improve mass production feasibility, optimizing fabrication processes, reducing material costs, and incorporating automated production lines are essential for scalability and defect reduction. For wireless integration, enhancing energy efficiency through low-power communication protocols and addressing signal interference and stability are critical for seamless operation. Real-time data processing requires innovative solutions such as edge computing and machine learning algorithms, ensuring low-latency, high-accuracy data interpretation while preserving the flexibility of sensor arrays. Finally, ensuring long-term stability and environmental adaptability demands new materials and protective coatings to withstand harsh conditions. Ongoing research and development are crucial to overcoming these challenges, ensuring that flexible sensor arrays meet the needs of diverse applications while remaining cost-effective and reliable. Full article

Objectives: Anastomotic leakage (AL) is one of the most devastating complications after colorectal surgery. The verification of the adequate perfusion of the anastomosis is essential to ensuring anastomosis integrity following colonic resections. This study aimed to evaluate the efficacy of measuring the electrical activity of the colonic muscularis externa at an anastomosis site for perfusion analysis following colorectal surgery. Methods: Strips of human isolated colon were maintained in a horizontal tissue bath to record spontaneous contractions and myoelectric activity and spike potentials (using a bipolar electrode array for the wireless transmission of myoelectric data—the xBar system) from the circular muscle. Intraoperative myoelectric signal assessment was performed by placing the electrode array on the colon prior to and following mesenteric artery ligation, just prior to colonic resection. Results: In human isolated colon, the amplitude, duration, and frequency of contractions were inhibited during hypoxia by >80% for each measurement, compared to control values and time-matched oxygenated muscle. Intraoperative (N = 5; mean age, 64.8 years; range, 54–74 years; 60% females) myoelectric signal assessment revealed a decline in spike rate following arterial ligation, with a mean reduction of 112.64 to 51.13 spikes/min (p < 0.0008). No adverse events were observed during the study, and the device did not substantially alter the surgical procedure. Conclusions: The electrical and contraction force of the human colon was reduced by ischemia, both in vitro and in vivo. These preliminary findings also suggest the potential of the xBar system to measure such changes during intraoperative and possibly postoperative periods to predict the risk of anastomotic viability as a surrogate of evolving dehiscence. Full article

With the global market value of sensors on the rise, this paper focuses on the fabrication and testing of a proof-of-concept piezoelectric energy harvester which is able to harvest mechanical energy from the ambient environment and convert it into electrical energy in order to power wireless sensor networks. We focused on obtaining a new device structure based on a comb-type array of piezoelectric MEMS cantilevers (2 × 10) for a resonant frequency in the environmental application domain (a few hundred Hz) and a chip area of only 1 cm². The configuration of the lead-free piezoelectric cantilever consists of a Si substrate, a pair of Ti-Pt electrodes and a sputtered piezoelectric layer of 12% Sc-doped AlN with a thickness of 1000 nm, a dielectric constant of ~13 and e_31,f = 1.3 C/m². At a resonant frequency of 465.2 Hz and an acceleration of 1 g, the maximum value for the collected power was 2.53 µW for an optimal load resistance of 1 MΩ resulting in a power density of 60.2 nW/mm³ for the unpacked device, without taking into account the vibration volume. By increasing the excitation acceleration to 2 g RMS and using LTC3588-1 for the power circuitry we were able to obtain a stabilized output voltage of 1.8 V. Full article

Commercial, high-tech upper limb prostheses offer a lot of functionality and are equipped with high-grade control mechanisms. However, they are relatively expensive and are not accessible to the majority of amputees. Therefore, more affordable, accessible, open-source, and 3D-printable alternatives are being developed. A commonly proposed approach to control these prostheses is to use bio-potentials generated by skeletal muscles, which can be measured using surface electromyography (sEMG). However, this control mechanism either lacks accuracy when a single sEMG sensor is used or involves the use of wires to connect to an array of multiple nodes, which hinders patients’ movements. In order to mitigate these issues, we have developed a circular, wireless s-EMG array that is able to collect sEMG potentials on an array of electrodes that can be spread (not) uniformly around the circumference of a patient’s arm. The modular sEMG system is combined with a Bluetooth Low Energy System on Chip, motion sensors, and a battery. We have benchmarked this system with a commercial, wired, state-of-the-art alternative and found an r = 0.98 (p < 0.01) Spearman correlation between the root-mean-squared (RMS) amplitude of sEMG measurements measured by both devices for the same set of 20 reference gestures, demonstrating that the system is accurate in measuring sEMG. Additionally, we have demonstrated that the RMS amplitudes of sEMG measurements between the different nodes within the array are uncorrelated, indicating that they contain independent information that can be used for higher accuracy in gesture recognition. We show this by training a random forest classifier that can distinguish between 6 gestures with an accuracy of 97%. This work is important for a large and growing group of amputees whose quality of life could be improved using this technology. Full article

In the electric vehicle wireless power transmission system, the high-frequency alternating magnetic field between the transmitter and receiver can have a certain impact on the health of living organisms and may even lead to lesions. In addition, metal foreign objects in an alternating magnetic field can cause their own heating or even cause fires due to the eddy current effect, so foreign object detection is an essential function in the wireless power transmission system of electric vehicles. In order to prevent metals and living organisms from entering the charging area and causing harm to the charging system and living organisms, this paper proposes a method for detecting living organisms and metal foreign objects. Firstly, the equivalent circuits for the detection systems of the living organism foreign objects and metal foreign objects are established, respectively, and the working theory of the detection system is analyzed by deriving equations. Secondly, the comb capacitor simulation model was constructed, and the comb capacitor electrode spacing, wire thickness, and capacitor spacing were designed based on the scale factor γ to explore the effects of the height and bottom area of the living organism’s foreign object on the comb capacitor. We constructed a simulation model of the detection coil and designed the inner diameter D, the number of turns N, and the wire spacing S of the detection coil according to the scale factor β. An arrayed detection coil and comb capacitor combination mode is proposed to realize the function of the simultaneous detection of metal and living organism foreign objects, and a compensation capacitor is introduced to keep the detection system in a resonant state. Lastly, a platform for foreign object detection experiments was set up to detect metal screws and beef chunks compared to the detection area without foreign objects. Metal screws entering the detection area cause a 20% voltage drop in the detection circuit resistor, and beef chunks entering the detection area cause a 30% voltage drop in the detection circuit resistor, so the detection method is effective in detecting both metals and living organisms. The feasibility of the combined mode of arrayed detection coils and comb capacitors was verified. Full article

A significant challenge in improving the deep brain stimulation (DBS) system is the miniaturization of the device, aiming to integrate both the stimulator and the electrode into a compact unit with a wireless charging capability to reduce invasiveness. We present a miniaturized, fully implantable, and battery-free DBS system designed for rats, using a liquid crystal polymer (LCP), a biocompatible and long-term reliable material. The system integrates the simulator circuit, the receiver coil, and a 20 mm long depth-type microelectrode array in a dome-shaped LCP package that is 13 mm in diameter and 5 mm in height. Wireless powering and control via an inductive link enable device miniaturization, allowing for full implantation and, thus, the free behavior of untethered animals. The eight-channel stimulation electrode array was microfabricated on an LCP substrate to form a multilayered system substrate, which was monolithically encapsulated by a domed LCP lid using a specialized spot-welding process. The device functionality was validated via an in vivo animal experiment using a neuropathic pain model in rats. This experiment demonstrated an increase in the mechanical withdrawal threshold of the rats with microelectrical stimulation delivered using the fully implanted device, highlighting the effectiveness of the system. Full article

In the background of the rapid development of artificial intelligence, big data, IoT, 5G/6G, and other technologies, electrochemical sensors pose higher requirements for high-throughput detection. In this study, we developed a workstation with up to 10 channels, which supports both parallel signal stimulation and online electrochemical analysis functions. The platform was wired to a highly integrated Bluetooth chip used for wireless data transmission and can be visualized on a smartphone. We used this electrochemical test platform with carbon–graphene oxide/screen-printed carbon electrodes (CB-GO/SPCE) for the online analysis of L-tyrosine (Tyr), and the electrochemical performance and stability of the electrodes were examined by differential pulse voltammetry (DPV). The CB-GO-based screen-printed array electrodes with a multichannel electrochemical platform for Tyr detection showed a low detection limit (20 μM), good interference immunity, and 10-day stability in the range of 20–200 μM. This convenient electrochemical analytical device enables high-throughput detection and has good economic benefits that can contribute to the improvement of the accuracy of electrochemical analysis and the popularization of electrochemical detection methods in a wide range of fields. Full article

Starting from the need for emergency rescue information transmission in tunnel engineering accidents, this article focuses on researching and solving the technical problems of information transmission between rescue personnel and trapped personnel after tunnel engineering collapse accidents, before and during the rescue process. The research objects are the information transmission channel and grounding electrode in the earth current field information transmission technology, and the electromagnetic characteristics of the earth medium and the electrical performance of the grounding electrode are studied and analyzed using the electromagnetic simulation software Maxwell based on finite element algorithm, establish a three-dimensional model based on the transmission of current field information of the ground electrode, analyze the effects of the electrode array, electrode depth, and radius on impedance. Research has shown that the impedance of the earth is related to the resistivity of the medium and is not a human-controllable factor. To reduce the contact impedance of an electric dipole antenna, one should start with the contact impedance of the earth electrode. The impedance of the transmitting end is an important factor affecting the efficiency of information transmission; parallel connection of multiple grounding electrodes, increasing the depth of grounding electrode penetration into the soil layer, and increasing the radius between grounding electrode pairs are all effective methods to reduce the contact impedance of electric dipole antennas, thereby improving information transmission capacity. To achieve wireless information transmission through the stratum, by appropriately selecting the operating frequency of electromagnetic waves, a certain distance of signal transmission can be achieved. Full article

Over the past two decades, the quick development of wireless sensor networks has required the sensor nodes being self-powered. Pushed by this goal, in this work, we demonstrated a ZnO nanowire-array-based piezoelectric nanogenerator (NG) prototype, which can convert mechanical energy into electricity. High-quality single crystalline ZnO nanowires, having an aspect ratio of about 15, grown on gold-coated silicon substrate, were obtained by using a low-cost and low-temperature hydrothermal method. The NG-device fabrication process has been presented in detail, and the NG’s performance has been tested in both compression and vibration modes. Peak power of 1.71 µW was observed across an optimal load resistance of 5 MΩ for the ZnO nanowires-based NG, with an effective area of 0.7 cm², which was excited in compression mode, at 9 Hz, corresponding to ~38.47 mW/cm³ volume-normalized power output. The measured voltage between the top and bottom electrodes was 5.6 V. In vibration mode, at 500 Hz, the same device showed a potential of 1.4 V peak-to-peak value and an instantaneous power of 0.04 μW, corresponding to an output power density of ~0.9 mW/cm³. Full article

This paper presents the use of ferroelectric behavior in scandium–aluminum nitride (Sc_xAl_1−xN) to create dual-mode Lamb-wave resonators for the realization of intrinsically configurable radio-frequency front-end systems. An integrated array of intrinsically switchable dual-mode Lamb-wave resonators with frequencies covering the 0.45–3 GHz spectrum. The resonators are created in ferroelectric scandium–aluminum nitride (Sc_0.28Al_0.72N) film and rely on period poling for intrinsic configuration between Lamb modes with highly different wavelengths and frequencies. A comprehensive analytical model is presented, formulating intrinsically switchable dual-mode operation and providing closed-form derivation of electromechanical coupling ($k_t^2$) in the two resonance modes as a function of electrode dimensions and scandium content. Fabricated resonator prototypes show $k_t^2$s as high as 4.95%, when operating in the first modes over 0.45–1.6 GHz, 2.23% when operating in the second mode of operation over 0.8–3 GHz, and series quality factors ($Q_s$) over 300–800. Benefiting from lithographical frequency tailorability and intrinsic switchability that alleviate the need for external multiplexers, and large $k_t^2$ and $Q$, dual-mode Sc_0.28Al_0.72N Lamb-wave resonators are promising candidates to realize single-chip multi-band reconfigurable spectral processors for radio-frequency front-ends of modern wireless systems. Full article

Miniaturization and wireless continuous glucose monitoring are key factors for the successful management of diabetes. Electrochemical sensors are very versatile and can be easily miniaturized for wireless glucose monitoring. The authors report a microneedle-based enzyme-free electrochemical wireless sensor for painless and continuous glucose monitoring. The microneedles (MNs) fabricated consist of a 3 × 5 sharp and stainless-steel electrode array configuration. Each MN in the 3 × 5 array has 575 µm × 150 µm in height and width, respectively. A glucose-catalyzing layer, porous platinum black, was electrochemically deposited on the tips of the MNs by applying a fixed cathodic current of 2.5 mA cm⁻² for a period of 200 s. For the non-interference glucose sensing, the platinum (Pt)-black-coated MN was carefully packaged into a biocompatible ionomer, nafion. The surface morphologies of the bare and modified MNs were studied using field-emission scanning electron microscopy (FESEM) and energy-dispersive X-ray analysis (EDX). The wireless glucose sensor displayed a broad linear range of glucose (1→30 mM), a good sensitivity and higher detection limit of 145.33 μA mM⁻¹ cm⁻² and 480 μM, respectively, with bare AuMN as a counter electrode. However, the wireless device showed an improved sensitivity and enhanced detection limit of 445.75, 165.83 μA mM⁻¹ cm⁻² and 268 μM, respectively, with the Pt-black-modified MN as a counter electrode. The sensor also exhibited a very good response time (2 s) and a limited interference effect on the detection of glucose in the presence of other electroactive oxidizing species, indicating a very fast and interference-free chronoamperometric response. Full article

Spinal cord stimulation is a therapy to treat the severe neuropathic pain by suppressing the pain signal via electrical stimulation of the spinal cord. The conventional metal packaged and battery-operated implantable pulse generator (IPG) produces electrical pulses to stimulate the spinal cord. Despite its stable operation after implantation, the implantation site is limited due to its bulky size and heavy weight. Wireless communications including wireless power charging is also restricted, which is mainly attributed to the electromagnetic shielding of the metal package. To overcome these limitations, here, we developed a fully implantable miniaturized spinal cord stimulator based on a biocompatible liquid crystal polymer (LCP). The fabrication of electrode arrays in the LCP substrate and monolithically encapsulating the circuitries using LCP packaging reduces the weight (0.4 g) and the size (the width, length, and thickness are 25.3, 9.3, and 1.9 mm, respectively). An inductive link was utilized to wirelessly transfer the power and the data to implanted circuitries to generate the stimulus pulse. Prior to implantation of the device, operation of the pulse generator was evaluated, and characteristics of stimulation electrode such as an electrochemical impedance spectroscopy (EIS) were measured. The LCP-based spinal cord stimulator was implanted into the spared nerve injury rat model. The degree of pain suppression upon spinal cord stimulation was assessed via the Von Frey test where the mechanical stimulation threshold was evaluated by monitoring the paw withdrawal responses. With no spinal cord stimulation, the mechanical stimulation threshold was observed as 1.47 ± 0.623 g, whereas the stimulation threshold was increased to 12.7 ± 4.00 g after spinal cord stimulation, confirming the efficacy of pain suppression via electrical stimulation of the spinal cord. This LCP-based spinal cord stimulator opens new avenues for the development of a miniaturized but still effective spinal cord stimulator. Full article