Search Results (105)

The field of nanotechnology has witnessed a paradigm shift towards eco-friendly and sustainable synthesis methods for nanoparticles due to increasing concerns over environmental toxicity and resource sustainability. Among various metal oxide nanoparticles, zirconium dioxide (ZrO₂) nanoparticles have garnered significant attention owing to their exceptional thermal stability, biocompatibility, mechanical strength, and catalytic properties. Doping ZrO₂ with transition metals such as copper (Cu) further enhances its physicochemical attributes, including antibacterial activity, redox behaviour, and electronic properties, rendering it suitable for a diverse range of biomedical and industrial applications. In the present study, we report the green synthesis of copper-doped ZrO₂ nanoparticles (Cu-ZrO₂-CO NPs) using an aqueous extract of Calendula officinalis (marigold) flowers as a natural reducing and stabilizing agent. The complete characterization was performed using UV–vis spectrophotometry, dynamic light scattering (DLS), zeta potential, FTIR, SEM, EDAX, and XRD, revealing its size to be around 20–40 nm and zeta potential as −20 mV, indicating nano size and stability. The biocompatibility of the as-synthesized nanoparticle was analyzed in vitro using fibroblast cell viability and haemolysis assay, and in vivo using brine shrimp assay. The nanoparticles were safe up to a dose of 50 μg/mL, showing more than 95% cell viability and less than 2% haemolysis, which is within an acceptable range. Finally, the anticancer activity was explored for A549 cells by MTT assay and live-dead assay, with an IC50 value of 38.63 μg/mL. The chorioallantoic membrane (CAM) model was used to assess the anti-angiogenesis potential of the Cu-ZrO₂-CO NPs. The results showed that the nanoparticles could kill the cancer cells via apoptosis, and one of the reasons for the anticancer effect was angiogenesis inhibition. Further research is needed using other cancer cell lines and animal tumour models. Full article

The formation of ice on roads is one of the leading causes of winter traffic accidents, resulting in significant social and economic costs. Conventional maintenance techniques, such as salting and mechanical clearance, are costly, environmentally harmful, and not always effective. This paper presents the design, implementation, and pilot validation of a passive geothermal anti-icing system tested at a dedicated experimental facility in Spain. The system consists of copper vertical heat exchangers (1 m depth), a thermal diffusion grid beneath the asphalt layer, and an IoT-based monitoring network using LoRaWAN sensors to capture real-time temperature data at three depths. During the monitoring period, the pilot system showed an increase in subsurface temperature compared to the control section, resulting in a lower likelihood of ice formation on the pavement surface. These findings demonstrate that passive geothermal systems can help improve road safety under winter conditions while reducing energy demand and the use of chemical agents. Future research will focus on optimizing system design, integrating deeper heat exchangers, and assessing large-scale economic feasibility. Full article

Background: Ozonation is a non-thermal process that can remodel the chemistry and bioactivity of plant extracts. We evaluated whether ozonating green tea extract enhances its phenolic composition and in vitro bioactivity in relation to nutrition and food applications, with potential clinical applications. Methods: Ethanolic green tea extract (GTE) was exposed to ozone (0–7 L/min, 5 h) to yield an ozonated extract (GTOE). Phenolics were quantified by the HPLC. Bioactivities included antimicrobial testing (agar diffusion; MIC/MBC/MFC), antibiofilm formation, time-kill kinetics (0–180 min), bacteria-induced hemolysis in human RBCs, DPPH radical scavenging, pancreatic lipase inhibition, and scratch-wound closure in human fibroblasts. Data from n = 3 independent experiments were analyzed by one-way ANOVA with Tukey’s post hoc test (α = 0.05). Results: Ozonation increased gallic acid (3150.92 to 3229.69 µg/g) and ellagic acid (2470.66 to 2789.40 µg/g), while catechin decreased slightly (2634.09 to 2535.09 µg/g). Compared with GTE, GTOE produced larger inhibition zones and lower MIC/MBC/MFC against Candida albicans, Bacillus subtilis, Staphylococcus aureus, Klebsiella pneumoniae, and Salmonella typhi; Aspergillus niger remained unsusceptible. For example, inhibition zones for S. aureus and K. pneumoniae increased by 2–4 mm and MIC/MBC values were 2-8-fold lower. Candida albicans showed marked sensitivity (MFC 500 to 125 µg/mL). GTOE exhibited superior, dose-dependent antibiofilm activity across all tested strains, reaching up to 97.82% inhibition, (highest for S. aureus and S. typhi, at 75% MBC). GTOE reduced bacterial counts more rapidly than GTE across all tested strains, achieving full eradication within 150 min. Bacteria-induced hemolysis was inhibited by 97% at 75% MIC with GTOE, versus 93–96% with GTE. Antioxidant capacity improved (DPPH IC₅₀ 3.31 vs. 5.54 μg/mL), as did lipase inhibition IC₅₀ 6.06 vs. 17.69 μg/mL). Wound closure at 48 h increased (GTOE 61.1%; GTE 56.8%; control 50.8%). Conclusions: Controlled ozonation of green tea extract remodeled phenolics and consistently enhanced antimicrobial, antibiofilm, antioxidant, potential anti-obesity, and wound-healing activities in vitro. These results support food-grade optimization and safety/by-product profiling, followed by in vivo validation at diet-relevant doses, to enable nutrition, food, and potential clinical applications. Full article

The increasing prominence of blade icing in wind power generation within cold regions has positioned anti-icing coating technology as a key research focus. This study synthesised phase-change microcapsules using bio-wax as the core material and isophorone diisocyanate as the shell material via interfacial polymerisation. These microcapsules were then compounded with polyurethane to form an anti-icing coating, whose properties and anti-icing performance were systematically investigated. Key findings indicate that a 1% emulsifier concentration yielded microcapsules with a concentrated particle size distribution (≈20 μm). Microcapsules with a core-to-shell ratio of 7:3 exhibited optimal thermal storage performance, characterised by a melting enthalpy of 49.73 J/g and an encapsulation efficiency of 78%, establishing this as the optimal formulation. Icing wind tunnel tests demonstrated enhanced anti-icing efficacy with increasing microcapsule concentration. At 36% concentration, the coating achieved an anti-icing efficiency of 65.80% under conditions of −15 °C and 3 m/s wind speed, and 64.05% at −10 °C and 6 m/s. The coating maintained its effectiveness under high wind speeds, though its performance diminished with increased water spray flux. The coating functioned by delaying ice formation through phase-change heat release. It consistently demonstrated an anti-icing efficiency exceeding 60% across operational conditions −15 °C to −5 °C and wind speeds of 3–9 m/s. This work provides an efficient and environmentally friendly anti-icing solution for wind turbine blades in cold regions. Full article

Roadway anti-icing requires low-carbon alternatives to chloride salts and electric heating. This study evaluated a seasonal thermal energy storage system that couples a geothermal hydronic heated pavement (HHPS-G) with borehole thermal energy storage (BTES), operated without auxiliary heat. A coupled transient HHPS-G–BTES model was developed and validated against independent experimental data. A continuous cycle was then simulated, consisting of three months of summer pavement heat harvesting and BTES, followed by three months of winter heat discharge. A parametric analysis varied borehole depth (10, 20, and 40 m) and number of units (1, 2, and 4). Results indicated that depth is consistently more effective than unit number. Deeper fields produced larger summer pavement surface cooling with less long-term drift and yielded more persistent winter anti-icing performance. The 40 m 4-unit case lowered the end-of-summer surface temperature by 3.8 °C relative to the no-operation case and kept the surface at or above 0 °C throughout winter. In contrast, the 10 m–1-unit case was near 0 °C by late winter. A depth-first BTES design, supplemented by spacing or edge placement to limit interference, showed practical potential for anti-icing without auxiliary heat. Full article

Transmission line icing poses a significant natural disaster threat to power grid security. This paper systematically reviews recent advances in the understanding of icing mechanisms, intelligent detection, and prevention technologies, while providing perspectives on future development directions. In mechanistic research, although a multi-physics coupling framework has been established, characterization of dynamic evolution over complex terrain and coupled physical mechanisms remains inadequate. Detection technology is undergoing a paradigm shift from traditional contact measurements to non-contact intelligent perception. Visual systems based on UAVs and fixed platforms have achieved breakthroughs in ice recognition and thickness retrieval, yet their performance remains constrained by image quality, data scale, and edge computing capabilities. Anti-/de-icing technologies have evolved into an integrated system combining active intervention and passive defense: DC de-icing (particularly MMC-based topologies) has become the mainstream active solution for high-voltage lines due to its high efficiency and low energy consumption; superhydrophobic coatings, photothermal functional coatings, and expanded-diameter conductors show promising potential but face challenges in durability, environmental adaptability, and costs. Future development relies on the deep integration of mechanistic research, intelligent perception, and active prevention technologies. Through multidisciplinary innovation, key technologies such as digital twins, photo-electro-thermal collaborative response systems, and intelligent self-healing materials will be advanced, with the ultimate goal of comprehensively enhancing power grid resilience under extreme climate conditions. Full article

Multifunctional coatings integrating high transparency, thermal insulation, and self-cleaning properties are critically needed for optical devices and energy-saving applications, yet simultaneously optimizing these functions remains challenging due to material and structural limitations. This study designed a superhydrophobic transparent thermal insulation coating via synergistic co-construction of micro–nano structures using antimony-doped tin oxide (ATO) and SiO₂ nanoparticles dispersed in an epoxy resin matrix, with surface modification by perfluorodecyltriethoxysilane (PFDTES) and γ-glycidyl ether oxypropyltrimethoxysilane (KH560). The optimal superhydrophobic transparent thermal insulating (SHTTI) coating, prepared with 0.6 g SiO₂ and 0.8 g ATO (SHTTI-0.6-0.8), achieved a water contact angle (WCA) of 162.4°, sliding angle (SA) of 3°, and visible light transmittance of 72% at 520 nm. Under simulated solar irradiation, it reduced interior temperature by 7.3 °C compared to blank glass. The SHTTI-0.6-0.8 coating demonstrated robust mechanical durability by maintaining superhydrophobicity through 40 abrasion cycles, 30 tape-peel tests, and sand impacts, combined with chemical stability, effective self-cleaning capability, and exceptional anti-icing performance that prolonged freezing time to 562 s versus 87 s for blank glass. This work provides a viable strategy for high-performance multifunctional coatings through rational component ratio optimization. Full article

Spent coffee grounds represent an abundant waste resource with potential for sustainable material applications. This study investigates the use of carbonized spent coffee grounds (CSCG) as fillers in polyurethane (PU) coatings for carbon fiber-reinforced polymer (CFRP) substrates to enhance mechanical durability and anti-icing performance. SCGs were dried, sieved (<100 µm), and oxidatively carbonized in air at 100–300 °C for 60–120 min, then incorporated into PU at 1 or 5 wt.% and applied by spray-coating. A full-factorial design was employed to evaluate the effects of carbonization temperature, particle size, and filler loading. The optimized formulation (300 °C, 100 µm, 5 wt.%) showed the highest water contact angle (103.5°), lowest work of adhesion (55.8 mJ/m²), and improved thermal stability with 60% char yield. Mechanical testing revealed increased tensile modulus with reduced strain, and differential scanning calorimetry indicated an upward shift in glass-transition temperature, suggesting restricted chain mobility. Ice formation at 0 °C was sparse and discontinuous, attributed to lowered polar surface energy, rough surface texture, and porous carbon morphology. These results demonstrate that CSCGs are effective sustainable fillers for PU coatings, offering combined improvements in mechanical, thermal, and anti-icing properties suitable for aerospace, wind power, and other icing-prone applications. Full article

Retinoid X receptor α (RXRα) plays a vital role in multiple biological and pathological processes and represents a promising therapeutic target for anti-tumor drug design. Inspired by the marine-derived RXRα antagonist meroterpenthiazole A, 21 undescribed benzothiazole derivatives were designed and synthesized. The inhibitory effects of 21 derivatives on RXRα transactivation and their anti-tumor activities against MDA-MB-231 cells were evaluated. Compounds 4a–4h, 6a–6b, 7c–7f, and 7h–7i inhibited 9-cis-retinoic acid-induced RXRα transactivation, while compounds 3b, 4f–4h, 7a, 7c, 7f, and 7h–7i exhibited inhibitory effects on the proliferation of MDA-MB-231 cells. Meanwhile, the structure–activity relationships governing both the RXRα antagonist effects and the anti-proliferative activities against MDA-MB-231 cells were discussed. Compound 7i exhibited the most potent inhibitory effects on the proliferation of MDA-MB-231 cells with an IC₅₀ value of 16.5 μM. Further mechanism studies revealed that compound 7i induced G2/M phase arrest in MDA-MB-231 cells, accompanied by dose-dependent downregulation of Cyclin B1 and CDK1 protein expression. However, these effects were abolished in RXRα-knockout MDA-MB-231 cells, indicating that the anti-proliferative and cell cycle arrest activities of 7i were RXRα-dependent. Cellular Thermal Shift Assay (CETSA) and molecular docking studies further confirmed that 7i directly bound to RXRα, thereby mediating its anti-cancer efficacy. Full article

Ice accretion on critical transportation infrastructure presents serious operational risks and economic challenges, highlighting the need for sustainable anti-icing solutions. This study develops a strong PDMS-based composite coating on aluminum by incorporating carbon nanotubes (CNTs) and carbon powder, effectively merging passive superhydrophobicity with photothermal capabilities. We systematically assess how different ratios of CNTs to carbon powder (3:1, 1:1, 1:3) influence surface morphology, wettability, anti-icing performance, mechanical durability, and corrosion resistance. The morphological analysis shows the formation of hierarchical micro/nano-structures, with the optimal 1:3 ratio (designated as P13) resulting in dense, porous agglomerates of intertwined CNTs and carbon powder. P13 demonstrates high-performing superhydrophobicity, with a contact angle of 139.7° and a sliding angle of 9.4°, alongside a significantly extended freezing delay of 180 s at −20 °C. This performance is attributed to reduced water–surface interaction and inhibited ice nucleation. Mechanical abrasion tests indicate remarkable durability, as P13 retains a contact angle of 132.5° and consistent anti-icing properties after enduring 100 abrasion cycles. Electrochemical analysis reveals exceptional corrosion resistance, particularly for P13, which achieves a notable 99.66% corrosion inhibition efficiency by creating a highly tortuous diffusion barrier that protects against corrosive agents. This multifunctional coating effectively utilizes the photothermal properties of CNTs, the affordability of carbon powder, the low surface energy of PDMS, and the thermal conductivity of aluminum, presenting a robust and high-performance solution for anti-icing applications in challenging environments. Full article

Icing represents a significant hazard to the flight safety of unmanned aerial vehicles (UAVs), particularly affecting critical aerodynamic surfaces such as air intakes, wings, and empennages. While conventional adhesive electrothermal de-icing systems are straightforward to operate, they present safety concerns, including a 15–25% increase in system weight, elevated anti-/de-icing power consumption, and the risk of interlayer interface delamination. To address the objectives of reducing weight and power consumption, this study introduces an innovative electrothermal–structural–durability co-design strategy. This approach successfully led to the development of a glass fiber-reinforced polymer (GFRP) component that integrates anti-icing functionality with structural load-bearing capacity, achieved through an embedded hot-pressing process. A stress-damage cohesive zone model was utilized to accurately quantify the threshold of mechanical performance degradation under electrothermal cycling conditions, elucidating the evolution of interfacial stress and the mechanism underlying interlayer failure. Experimental data indicate that this novel component significantly enhances heating performance compared to traditional designs. Specifically, the heating rate increased by approximately 202%, electrothermal efficiency improved by about 13.8% at −30 °C, and interlayer shear strength was enhanced by approximately 30.5%. This research offers essential technical support for the structural optimization, strength assessment, and service life prediction of UAV anti-icing and de-icing systems in the aerospace field. Full article

This study explores the valorization of agro-industrial by-products—riceberry broken rice (RBR) and soybean meal (SBM)—as cost-effective substrates for enhancing exopolysaccharide (EPS) production by Bacillus tequilensis PS21. Eight Bacillus strains were screened, and B. tequilensis PS21 demonstrated the highest EPS yield (2.54 g/100 mL DW). The EPS displayed a strong antioxidant capacity with 65.5% DPPH and 80.5% hydroxyl radical scavenging, and a FRAP value of 6.51 mg Fe²⁺/g DW. Antimicrobial testing showed inhibition zones up to 10.07 mm against Streptococcus agalactiae and 7.83 mm against Staphylococcus aureus. Optimization using central composite design (CCD) and the response surface methodology (RSM) revealed the best production at 5% (w/v) RBR, 3% (w/v) SBM, pH 6.66, and 39.51 °C, yielding 39.82 g/L EPS. This EPS is a moderate-molecular-weight (11,282 Da) homopolysaccharide with glucose monomers. X-ray diffraction (XRD) showed an amorphous pattern, favorable for solubility in biological applications. Thermogravimetric analysis (TGA) demonstrated thermal stability up to ~250 °C, supporting its suitability for high-temperature processing. EPS also exhibited anticancer activity with IC₅₀ values of 226.60 µg/mL (MCF-7) and 224.30 µg/mL (HeLa) at 72 h, reduced colony formation, inhibited cell migration, and demonstrated anti-tyrosinase, anti-collagenase, and anti-elastase effects. This study demonstrates the successful valorization of agro-industrial by-products—RBR and SBM—for the high-yield production of multifunctional EPS with potent antioxidant, antimicrobial, and anticancer properties. The findings highlight the sustainable potential of these low-cost substrates in supporting the development of green and value-added bioproducts, with promising utilizations across the food, pharmaceutical, and cosmetic sectors. Full article

Aircraft wing surface icing compromises flight safety, where accurate calculation of heat transfer coefficient on airfoil surfaces serves as a prerequisite for designing thermal anti-icing systems. However, during icing conditions, ice morphology changes wall roughness and transition properties, making it difficult to accurately determine the heat transfer coefficient. The current study develops a partitioned rough-wall boundary layer integral methodology in order to overcome this issue, extending the conventional boundary layer integral method. The technique generates a convective heat transfer coefficient formulation for aircraft icing surfaces while accounting for roughness differences brought on by water droplet shape. The results show that the partitioned rough-wall boundary layer integral method divides the wing surface into three distinct zones based on water droplet dynamics—a smooth zone, rough zone, and runback zone—each associated with specific roughness values. The NACA0012 airfoil was used for numerical validation, which showed that computational and experimental data concur well. Additionally, the suggested approach predicts transition locations with a high degree of agreement with experimental results. Full article

Prunus leaf extracts are rich in phenolic and flavonoid compounds like rutin, and they are known for their antioxidant potential. This study compares the bioactivity and stability of leaf extracts from Prunus domestica L. (EL), Prunus salicina Lindl. (JL), and Prunus cerasifera Ehrh. (CL) and evaluates the dermal safety of a cream containing the extract with the most favorable in vitro properties for potential cosmetic use. Ethanolic extracts were assessed for total phenolic and condensed tannin contents, as well as antioxidants, using DPPH assay and lipid peroxidation inhibitory activities. The CL extract exhibited moderate total phenolic content, the highest condensed tannin content, and strong antioxidant (IC₅₀ = 22.1 ± 3.1 µg/mL) and anti-lipid peroxidation (62.3 ± 1.0%) activities. Based on these results, CL was incorporated into a cream formulation (CCL), which was then evaluated for physicochemical properties, antioxidant retention, and in vitro skin permeation using Franz diffusion cells. The formulation remained physically stable under ambient conditions and retained antioxidant activity above 74.5% under thermal cycling conditions. Rutin from the CCL formulation was retained within the Strat-M™ membrane (4.0 ± 1.1%), which was 5.7-fold higher than that of the control (0.7 ± 0.6%) over 8 h; however, it was not detected in the receptor chamber under these in vitro conditions. A semi-open patch test conducted on 26 healthy volunteers under double-blind conditions revealed no signs of irritation, confirming the formulation’s dermal safety. Overall, the findings support the feasibility of using P. cerasifera extract as a stable antioxidant component in topical skincare formulations. Full article

Background/Objectives: In order to enhance the biological activity, novel complexes of N-(2-bromo-phenyl)-2-hydroxy-benzamide derivatives and β-cyclodextrin were obtained. Methods: The inclusion complexes were characterized using spectral and thermal analyses. The antimicrobial activity was determined using the disk diffusion agar method, and completed with the minimum inhibitory concentration (MIC) values obtained by the broth microdilution method. The in vitro anti-inflammatory activity was evaluated using the protease inhibition assay. Results: The computed supramolecular architectures of the inclusion complexes showed that the most stable molecular arrangements correspond to the models in which the N-(2-bromo-phenyl)-2-hydroxy-benzamide derivatives are partially included in the cyclodextrin cavity. The antimicrobial screening showed that the compounds were active against Gram-positive bacteria (MIC = 2.5–5.0 mg/mL). Also, the evaluation of the proteinase inhibitory activity showed that the IC₅₀ values of the title compounds (0.04–0.07 mg/mL) were much lower than that of the acetylsalicylic acid (0.4051 ± 0.0026 mg/mL) used as positive control, proving their superior efficiency in inhibiting trypsin activity. Conclusions: The complexation proved to be beneficial for both antimicrobial and anti-inflammatory effects. Full article