Search Results (157)

We report the first synthesis of IspH-directed prodrugs targeting the terminal enzyme of the 2-C-methyl-D-erythritol 4-phosphate (MEP) pathway, (E)-4-hydroxy-3-methylbut-2-enyl diphosphate reductase (IspH or LytB). A series of alkyne and pyridine monophosphate cycloSaligenyl (cycloSal) prodrugs were prepared to enhance membrane permeability by masking the phosphate group. The effects of electron-withdrawing (Cl, CF₃) and electron-donating (OCH₃, NH₂) substituents were examined, together with amino acid-functionalized and mutual prodrug analogs. Among the synthesized compounds, chlorine-substituted derivatives 5c and 6c displayed the strongest antimycobacterial activity against Mycobacterium smegmatis, surpassing isoniazid in agar diffusion assays. These results indicate that electron-withdrawing substituents accelerate prodrug hydrolysis and facilitate intracellular release of the active inhibitor. This work provides the first experimental evidence of an IspH-targeted prodrug approach, highlighting the cycloSal strategy as a valuable tool for delivering phosphorylated inhibitors and developing novel antimycobacterial agents acting through the MEP pathway. Full article

We developed an efficient and modular route to 2- and 6-(1,2,3-triazol-1-yl)azulenes to expand the synthetic accessibility and functional scope of azulene-based π-systems with stimulus-responsive photophysics. Readily accessible 2- and 6-azidoazulenes, prepared in excellent yields via S_NAr reactions of haloazulenes, were subjected to Cu(I)-catalyzed Huisgen [3 + 2] cycloaddition with a broad range of terminal alkynes to afford the corresponding triazolylazulenes in good to high yields, followed by acid-mediated decarboxylation and Staudinger reduction to enable further diversification to 2-azulenyltriazoles and a 6-aminoazulene derivative. Single-crystal X-ray diffraction analysis revealed substitution-position-dependent torsional arrangements and variations in π-conjugation between the azulene and triazole units. Photophysical characterization by UV/Vis absorption and fluorescence spectroscopy showed pronounced halochromism under acidic conditions, and selected derivatives displayed substantially enhanced fluorescence quantum yields. Overall, these results establish the azulene–1,2,3-triazole motif as a versatile building block for designing optoelectronic π-systems with acid-responsive emission properties. Full article

Chitosan is a biopolymer with excellent properties such as biodegradability, biocompatibility, bioactivity, and non-toxicity, making it an attractive material for various applications. In this study, to enhance these properties particularly for the development of food coatings chitosan derivatives (1,2,3-triazoles) were synthesized via microwave-assisted 1,3-dipolar cycloaddition (CuAAC) using different terminal alkynes. The resulting compounds were obtained in high yields 79.7–88.0% and characterized by vibrational (IR) and electronic (UV–Visible) spectroscopy. Films were formed by combining the derivatives with PVA and characterized using differential scanning calorimetry (DSC), tensile strength testing, and water vapor permeability analysis. The resulting films exhibited improved mechanical properties, homogeneous thicknesses, low-porosity surfaces, and favorable barrier properties, highlighting their potential applicability as food coating materials. Full article

Cytisine, a naturally occurring alkaloid and partial agonist of nicotinic acetylcholine receptors (nAChRs), has long been used as a smoking cessation aid and serves as the pharmacophore for varenicline. Recent research has expanded its therapeutic scope to neurodegenerative and neurological disorders, motivating the development of new cytisine derivatives. Among these, N-propargylcytisine combines the biological activity of the parent compound with the synthetic versatility of the terminal alkyne group. Herein, we report the synthesis and characterization of N-propargylcytisine, and its symmetrical dimer linked through 1,3-diyne moiety obtained via a copper-mediated Glaser–Hay oxidative coupling. The products were analyzed by NMR, FT-IR, and mass spectrometry, confirming the introduction of the propargyl moiety and the formation of the diyne bridge. Solvatochromic study of both compounds were performed using UV-VIS absorption spectroscopy in solvents of varying polarity, including protic solvents capable of hydrogen bonding. The 1,3-diyne motif, commonly found in bioactive natural products, endows the resulting dimer with potential for further derivatization and biological evaluation. This study demonstrates the utility of the Glaser–Hay reaction in the functionalization of alkaloid scaffolds and highlights the prospects of N-propargylcytisine derivatives in drug discovery targeting the central nervous system. Full article

We report a rapid aqueous method for synthesizing monodisperse gold nanoparticles (AuNPs), employing 2-propynylamine as both an intrinsic reducing agent and a surface-stabilizing ligand. This self-mediated process—achieved in a single step—yields spherical AuNPs with an average diameter of 4.0 ± 1.0 nm and a well-defined localized surface plasmon resonance band centered at 520 nm. Acting as a bifunctional molecule, 2-propynylamine simultaneously reduces HAuCl₄·3H₂O to elemental gold and passivates the nanoparticle surface through coordination via the amine group, while preserving a terminal alkyne (–C≡CH) functionality. This reactive moiety remains exposed and chemically accessible, enabling post-synthetic modification through Cu(I)-catalyzed azide–alkyne cycloaddition. Control experiments using alternate milling times and vial composition confirmed the essential role of 2-propynylamine in mediating both reduction and surface functionalization. The resulting alkyne-functionalized AuNPs serve as versatile “click-ready” platforms for bioconjugation, sensing, and advanced material assembly. Overall, this scalable, green approach eliminates the need for external reducing or capping agents and provides a modular route to chemically addressable nanomaterials with tunable surface reactivity. Full article

A large amount of CO₂ is released into the atmosphere by energy and industrial plants resulting in significant environment impacts. A considerable effort went into decreasing CO₂ emissions. The carboxylation reaction of converting CO₂ with aromatic alkynes to important chemicals such as carboxylic acids is one of the promising CO₂ utilization methods, and it can be performed in the catalytic or non-catalytic pathway. Our review article provides an overview of recent publications on the use of catalytic systems with different compositions and structures for the carboxylation of terminal alkynes by involving CO₂, and the effect of a solvent and base. Relying on the research results, the use of heterogeneous catalysts is the most effective. The advantage of catalytic systems is a lower reaction temperature and pressure. Heterogeneous silver-containing catalysts exhibit good yields of products and high selectivity. Moreover, the catalysts may lose their efficiency when interacting with moisture. It has been found that the most effective catalysts for the carboxylation of phenylacetylene with carbon dioxide as a carboxylating agent are copper-based catalysts. These catalysts are characterized by high activity and stability. We highlight the challenges of developing novel catalyst systems tuning catalytic properties. The future outlook and perspectives are also discussed. Full article

Brønsted acid-catalyzed, regiodivergent hydroindolation of indoles with terminal aryl alkynes was developed, affording bis(indolyl)alkanes in good to excellent yields. Systematic investigations revealed that temperature variation plays a key role in determining the regioselectivity of anti-Markovnikov and Markovnikov addition reactions. The reaction proceeds efficiently under transition metal-free conditions in an environmentally benign water/alcohol solvent system, using readily available and inexpensive p-toluenesulfonic acid (TsOH) as the catalyst. Control experiments and mechanistic studies support distinct reaction pathways for each regioisomer. Full article

An efficient access to the novel representatives of α,α-disubstituted α-amino acids with 1,3-enyne unit located at their side chain has been elaborated. The method is based on Pd(II)-catalyzed hydroalkynylation of α-allenyl-α-dimethylamino esters with terminal acetylenes. The developed strategy is the first example of the metal-catalyzed allene-alkyne coupling to provide a convenient route to new unsaturated α-amino acid derivatives in good yields and high selectivity. Full article

Terminal alkynes, characterized by sp-hybridized carbon atoms at the molecular termini, possess high electron density and exceptional chemical reactivity. These properties make them ideal candidates for the synthesis of one-dimensional molecular wires and two-dimensional networks. Advances in nanoscale characterization techniques, such as scanning tunneling microscopy and atomic force microscopy, have enabled the real-space visualization of molecular assembly and chemical reactions of terminal alkynes and in situ atomic-level manipulations under surface-confined conditions. In addition, through the combination of spectroscopic measurements, physicochemical properties of and information about resulting nanostructures have been achieved. Moreover, density functional theory calculations provide deeper insights into the underlying reaction pathways and mechanisms. From this perspective, this review summarizes recent progress in the assembly and chemical transformations of terminal alkynes on noble metal surfaces. It discusses strategies for structural modulation and reaction selectivity control, including direct incorporation of heteroatoms or functional groups into precursors, the selection of metal surfaces, the introduction of extrinsic components into molecular systems, and atomic-scale manipulations using scanning probes. Full article

Estradiol (E2) plays an important role in cell proliferation and certain brain functions. To reveal its mechanism of action, its detectability is essential. Only a few fluorescent-labeled hormonally active E2s exist in the literature, and their mechanism of action usually remains unclear. It would be of particular interest to develop novel labeled estradiol derivatives with retained biological activity and improved optical properties. Due to their superior optical characteristics, aza-BODIPY dyes are frequently used labeling agents in biomedical applications. E2 was labeled with the aza-BODIPY dye at its phenolic hydroxy function via an alkyl linker and a triazole coupling moiety. The estrogenic activity of the newly synthesized fluorescent conjugate was evaluated via transcriptional luciferase assay. Docking calculations were performed for the classical and alternative binding sites (CBS and ABS) of human estrogen receptor α. The terminal alkyne function was introduced into the tetraphenyl aza-BODIPY core via selective formylation, oxidation, and subsequent amidation with propargyl amine. The conjugation was achieved via Cu(I)-catalyzed azide–alkyne click reaction of the aza-BODIPY-alkyne with the 3-O-(4-azidobut-1-yl) derivative of E2. The labeled estrogen induced a dose-dependent transcriptional activity of human estrogen receptor α with a submicromolar EC₅₀ value. Docking calculations revealed that the steroid part has a perfect overlap with E2 in ABS. In CBS, however, a head-tail binding deviation was observed. A facile, fluorescent labeling methodology has been elaborated for the development of a novel red-emitting E2 conjugate with substantial estrogenic activity. Docking experiments uncovered the binding mode of the conjugate in both ABS and CBS. Full article

Herein, we report a one-pot palladium- and ligand-free tandem Sonogashira coupling/regioselective 6-endo-dig oxacyclization reaction of 2,4-diiodo-1-methyl-imidazole-5-carboxylic acid with terminal alkynes mediated by Copper(I). This impressive approach offers a straightforward, practical, and efficient tandem procedure for accessing 2-alkynylated pyrano[4,3-d]imidazol-4-one in moderate to good yields with an exclusive 6-endo-dig oxacyclization. Notably, this cost-effective methodology demonstrates broad substrate compatibility with various commercially available aliphatic and (hetero)aromatic terminal alkynes. Furthermore, DFT studies were performed to elucidate the origin of this regioselective 6-endo-dig oxacyclization reaction. Full article

The synthesis of novel biodegradable polymers as non-viral vectors remains one of the challenging tasks in the field of gene delivery. In this study, the synthesis of the polysaccharide-g-polypeptide copolymers, namely, hyaluronic acid-g-polylysine (HA-g-PLys), using a copper-free strain-promoted azide-alkyne cycloaddition reaction was proposed. For this purpose, hyaluronic acid was modified with dibenzocyclooctyne moieties, and poly-L-lysine with a terminal azido group was obtained using ring-opening polymerization of N-carboxyanhydride of the corresponding protected amino acid, initiated with the amino group azido-PEG₃-amine. Two HA-g-PLys samples with different degrees of grafting were synthesized, and the structures of all modified and synthesized polymers were confirmed using ¹H NMR and FTIR spectroscopy. The HA-g-PLys samples obtained were able to form nanoparticles in aqueous media due to self-assembly driven by electrostatic interactions. The binding of DNA and model siRNA by copolymers to form polyplexes was analyzed using ethidium bromide, agarose gel electrophoresis, and SybrGreen I assays. The hydrodynamic diameter of polyplexes was ˂300 nm (polydispersity index, PDI ˂ 0.3). The release of a model fluorescently-labeled oligonucleotide in the complex biological medium was significantly higher in the case of HA-g-PLys as compared to that in the case of PLys-based polyplexes. In addition, the cytotoxicity in normal and cancer cells, as well as the ability of HA-g-PLys to facilitate intracellular delivery of anti-GFP siRNA to NIH-3T3/GFP+ cells, were evaluated. Full article

1,2,4-Cyclohexatrienes are strained, reactive intermediates often formed by the tetradehydro-Diels–Alder (TDDA) reaction of a conjugated enyne bearing a tethered alkyne as the enynophile. The ene component is commonly the π-bond of an aromatic group. In this focused study, we investigated the reactivity of a symmetrical substrate in which the pair of terminal ene moieties were simple 2-propenyl groups. The intermediate 1,2,4-cyclohexatriene, now bearing a 5-isopropenyl group, underwent competitive aromatization (the most usual outcome of the strain-relieving event of the cyclohexatriene), along with an intramolecular [1,5]-hydrogen atom migration, ultimately producing a non-benzenoid, pyrrole derivative. This represents a previously unknown process for a 1,2,4-cyclohexatriene derivative. Mechanistic aspects of the competitive processes were revealed by experiments performed in the presence of various protic additives (MeOD and BHT). Full article

Morquio A syndrome is a lysosomal disorder caused by the deficiency of the lysosomal enzyme N-acetylgalactosamine 6-sulfatase (GALNS, EC 3.1.6.4). Currently, enzyme replacement therapy (ERT) is used to treat Morquio A through the infusion of the recombinant enzyme VIMIZIM^® (elosulfase alfa, BioMarin). Unfortunately, the recombinant enzyme exhibits low conformational stability in vivo. A promising approach to address this issue is the coadministration of recombinant human GALNS (rhGALNS) with a pharmacological chaperone (PC), a molecule that selectively binds to the misfolded protein, stabilizes its conformation, and assists in the restoration of the impaired function. We report in this work the synthesis of a library of multivalent glycomimetics exploiting the copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction between several dendrimeric scaffolds armed with terminal alkynes and azido ending iminosugars of different structures (pyrrolidines, piperidines, and pyrrolizidines) or simple azido ending carbohydrates as bioactive units. The biological evaluation identified pyrrolidine-based nonavalent dendrimers 1 and 36 as the most promising compounds, able both to bind the native enzyme with IC₅₀ in the micromolar range and to act as enzyme stabilizers toward rhGALNS in a thermal denaturation study, thus identifying promising compounds for a combined PC/ERT therapy. Full article

The advancement of green chemistry and sustainable chemical processes has been significantly facilitated by catalytic systems derived from plant roots, which also present substantial application prospects in the realm of chemical synthesis. This study utilized the roots of Rhizoma Coptidis as a support to successfully fabricate a silver-based nanocatalyst. By depositing silver nanoparticles onto the root material of Coptis chinensis and subjecting it to carbonization, a silver/carbon composite was synthesized, featuring monodisperse silver nanoparticles and a hierarchical mesoporous carbon framework. This composite exhibits robust surface activity, a well-defined pore structure, and superior mechanical properties. The catalyst achieves a catalytic yield nearing 90%, showcasing remarkable activity in terminal alkyne halogenation reactions. Its stability and recyclability are markedly enhanced; it retains 95% of its mass and remains unaltered in the reaction solvent for over 160 h after five cycles. This method simplifies the synthesis of terminal alkynes and their derivatives, rendering the process more environmentally benign and efficacious. Furthermore, it broadens the potential applications of Rhizoma Coptidis in synthetic chemistry and pioneers a novel approach for the synthesis of precious metal catalysts from renewable resources. Full article