Search Results (276)

Radiation-induced keratoconjunctivitis sicca (KCS) is a significant late complication in dogs receiving radiation therapy for intranasal tumors, particularly with hypofractionated intensity-modulated radiation therapy (IMRT). This retrospective case-control study was performed to identify anatomical and dosimetric risk factors for KCS in 15 canine patients treated with IMRT delivered in 4–6 weekly fractions of 8 Gy. Orbital structures were retrospectively contoured, and dose–volume metrics (D50) were calculated. Receiver operating characteristic (ROC) curve analysis and odds ratios were used to evaluate the associations between radiation dose and KCS development. Six dogs (33%) developed KCS within three months post-treatment. Statistically significant dose differences were observed between affected and unaffected eyes for the eyeball, cornea, and retina. ROC analyses identified dose thresholds predictive of KCS: 13.8 Gy (eyeball), 14.9 Gy (cornea), and 17.0 Gy (retina), with the retina showing the highest odds ratio (28.33). To ensure clinical relevance, KCS was diagnosed based on decreased tear production combined with corneal damage to ensure clinical relevance. This study proposes dose thresholds for ocular structures that may guide treatment planning and reduce the risk of KCS in canine patients undergoing IMRT. Further prospective studies are warranted to validate these thresholds and explore mitigation strategies for high-risk cases. Full article

The formation of hot tearing during direct chill casting of aluminum alloys, specifically AA6111, is a significant challenge in the production of ingots for industrial applications. This study investigates the role of hydrostatic pressure and tensile stress in the formation of hot tearing during direct chill casting of rectangular ingots. Combining experimental results and finite element modeling with ABAQUS/CAE 2022, the mechanical behavior of the semi-solid AA6111 alloy was analyzed under different cooling conditions. “Hot” (low water flow) and “Cold” (high water flow) conditions were the two types of cooling conditions that produced cracked and sound ingots, respectively. The outcomes indicate that high tensile stress and localized negative hydrostatic pressure in the hot condition are the main factors promoting the initiation and propagation of cracks in the mushy zone, whereas the improvement of the cooling conditions reduces these defects. Full article

Nowadays, a significant portion of the population uses eye cosmetics, a trend that is not limited to women, as men increasingly adopt stylish makeup techniques. Eye cosmetics, often termed eye makeup, include a diverse array of products such as eyelash enhancers (mascara, false eyelashes, growth serums, and dyes), eyelid products (eyeliner, kohl, eye contour cream, and eyeshadow), and eye makeup removers. There is a persistent interest among dermatologists in the influence of eye cosmetics on the skin surrounding the eye. The formulation of these cosmetics typically consists of various ingredients, some of which may present potential health risks to users. The application of eye cosmetics is linked to a range of adverse effects on the ocular surface, which may manifest as mechanical injury, tear film instability, toxicity, inflammation, and infections. Therefore, the use of cosmetics in this sensitive area is of paramount importance, necessitating a cooperative approach among eyecare professionals, dermatologists, and beauty experts. Despite the widespread use of eye makeup, its possible ocular side effects have not been sufficiently addressed. This report aims to elucidate how the use of eye cosmetics represents a lifestyle challenge that may exacerbate or initiate ocular surface and adnexal disorders. Full article

This paper aimed to evaluate the effect of cross-linking temperature on the rheological, mechanical, and thermal properties of CR/BR compositions cross-linked with zinc oxide, iron(III) oxide, or copper(II) oxide. Properties of CR/BR compounds were studied at four temperatures: 140, 160, 180, and 200 °C. The lowest activation energy of vulcanization was shown by blends cross-linked with ZnO, and the highest activation energy of vulcanization was shown by samples with Fe₂O₃. Blends cured with ZnO or Fe₂O₃ showed higher cross-linking activity than CuO. Higher temperatures enhanced the degree of cross-linking in the CR/BR composite cured with ZnO or CuO but slightly reduced it for the CR/BR/Fe₂O₃ vulcanizates. The highest tensile strength was observed for the CR/BR/Fe₂O₃ product. However, compositions cured with ZnO exhibited the best aging resistance. The CR/BR compounds cured with ZnO at high temperatures had the highest tear strength (16.8 N/mm), while samples containing CuO as a curing agent showed declining tear strength with temperature. DSC confirmed a single glass transition (~36 °C), indicating good elastomers dispersion. Infrared and SEM analyses confirmed effective cross-linking and blend compatibility. Full article

Bio-nanocomposite films were prepared using chitosan, gelatin, and varying concentrations (0, 0.5, 1.0, 2.0, and 5.0 wt%) of titanium dioxide (TiO₂) nanoparticles in acetic acid via a casting method. The incorporation of TiO₂ nanoparticles into the bio-chitosan matrix enhanced ultraviolet (UV) absorption and improved the films’ physical, mechanical, and electrical properties. Additionally, the TiO₂-loaded films exhibited antimicrobial activity, contributing to the extended preservation of packaged products by inhibiting microbial growth. Notably, the bio-nanocomposite films containing 1.0 wt% TiO₂ exhibited an electroactive response, bending under relatively low electric field strength (250 V/mm), whereas the control film without TiO₂ required higher field strength (550 V/mm) to achieve bending. This indicates potential applications in electroactive actuators requiring precise movement control. Among the tested concentrations, films containing 0.5 wt% and 1.0 wt% TiO₂ (Formulas 7 and 8) demonstrated optimal performance. These films presented a visually appealing appearance with no tear marks, low bulk density (0.91 ± 0.04 and 0.85 ± 0.18 g/cm³), a satisfactory electromechanical response at 250 V/m (17.85 ± 2.58 and 61.48 ± 6.97), low shrinkage percentages (59.95 ± 3.59 and 54.17 ± 9.28), high dielectric constant (1.80 ± 0.07 and 8.10 ± 0.73), and superior UV absorption compared with pure bio-chitosan films, without and with gelatin (Formulas 1 and 6). Full article

The pressing issue of global warming has prompted industries to seek sustainable and renewable materials that can reduce the use of petroleum-based products. Natural fibers, as bio-based and environmentally friendly materials, offer a promising solution. In this study, ramie fiber, which is one of the strongest natural fibers, is used as reinforcement, and the mechanical properties of natural rubber composites are evaluated. The composites were fabricated using a vulcanizing technique at 150 °C, and the fibers were cut into different lengths (5 mm, 10 m, and 15 mm) and weights (15 g, 30 g, and 60 g). Mechanical performance tests, including tensile and tear strength and hardness, were conducted. The results showed that as fiber concentration increased, so did the curing time. Moreover, the composites with higher fiber concentration had higher strength. The composite with a 10 mm fiber length and 60 g weight showed the highest tensile strength (10.35 MPa). Maximum tear strength (52.51 kN/m) was achieved with 5 mm fiber length and 60 g weight. Hardness values reached up to 88 Shore A (10 mm fiber length and 60 g weight), indicating excellent wear resistance. The specimen with the highest tensile strength was subjected to scanning electron microscope analysis. The SEM analysis revealed that the composite had a ductile type of fracture with appreciable plastic deformation, confirming good fiber–matrix interaction. These findings underscore the potential of ramie fiber–reinforced natural rubber composites as sustainable, high-performance alternatives to petroleum-based materials in structural and vibration-damping applications. Full article

Cellulose-based paper products derived from agro-industrial waste have attracted considerable interest due to their potential in sustainable material development. In this study, bacterial cellulose (BC) residue from the food and beverage industry was employed as a reinforcing agent to fabricate high-performance paper composites by blending with eucalyptus pulp (EP) at various ratios and basis weights. These papers were coated with a cationic modified starch solution (MS) using a rod coater, followed by hot pressing. Mechanical strengths (TAPPI Standard), water resistance (Cobb test and water contact angle), and air permeability (ASTM D737) were evaluated to assess material performance. The results showed that incorporating 50 wt% BC produced paper with outstanding mechanical performance, characterized by a high tensile index and excellent tear resistance. The application of the MS coating significantly boosted water resistance and air barrier performance, underscoring the effectiveness of this approach in creating high-performance paper materials. The resulting coated composites demonstrated excellent mechanical strength and barrier properties, positioning them as promising candidates for filtration applications such as personal protective face mask membranes. Full article

Dry eye disease (DED) is a common, multifactorial disorder of the ocular surface. Although DED can affect individuals at any age, its prevalence, clinical manifestations, underlying mechanisms, and optimal management strategies differ considerably across the lifespan. In children, symptoms are frequently associated with atopy and allergic disorders and environmental factors, whereas in young adults, digital device usage and contact lens wear are the predominant contributors. In older adults, systemic diseases and polypharmacy significantly elevate the risk of DED. Across all age groups, tear film instability, decreased tear production, and chronic inflammation are central pathogenic features. Key tear biomarkers, such as pro-inflammatory cytokines, have been widely linked to disease development. Cathepsin S and tumor necrosis factor-alpha have recently been implicated in age-related DED. A nuanced understanding of these age-related differences is crucial for improving diagnostic accuracy and tailoring interventions to specific patient populations. This review synthesizes current evidence on DED across age groups, focusing on prevalence, risk factors, pathophysiology, molecular mechanisms, coexisting conditions, biomarkers, and treatment options. Finally, it highlights critical unmet clinical needs in the management of age-related DED. Full article

Dry eye is an ophthalmic disease with an intricate pathomechanism, and there are no effective interventions or medications available. We investigated the effects of a peptide, DFCPPGFNTK (DFC), screened from tilapia skin hydrolysate on dry eye and its underlying mechanisms. In vitro, human corneal epithelial cells (HCECs) were challenged by 100 mM NaCl in a hyperosmotic environment. DFC restored the cell viability of HCECs induced by NaCl, reduced the transition of mitochondrial membrane potential, delayed the apoptosis of damaged cells, reduced the production of reactive oxygen (ROS) and malondialdehyde (MDA), increased the activities of superoxide dismutase (SOD) and catalase (CAT), and increased the expression rate of Bcl-2/Bax. Compared to the model group, the protein expression levels of COX-2 and iNOS were down-regulated, the mRNA expression of Tnf-α and Il-6 were decreased, the protein expression levels of Nrf2 and HO-1 were increased, and the levels of autophagy-related proteins p62 and LC3B were regulated. In vivo, the dry eye model was developed by administering eye drops of 0.2% BAC to mice for 14 days. DFC increased tear secretion, changed the morphology of tear fern crystals, prevented corneal epithelial thinning, reduced the loss of conjunctival goblet cells (GCs), and inhibited the apoptosis of mice corneal epithelial cells. In summary, DFC improved dry eye by inhibiting oxidative stress, apoptosis, inflammation, and autophagy. Full article

Lactoperoxidase (LPO) (E.C. 1.11.1.7) is a member of the superfamily of mammalian heme peroxidases that is isolated from milk, and it is the first enzyme announced to be found in milk. In addition to milk, LPO is also found in saliva, tears, and airways (airway goblet cells and submucosal glands). It contributes significantly to the self-defense of the mammal body. It catalyzes the oxidation of certain molecules such as thiocyanate (SCN⁻), I⁻, and Br⁻ in the presence of hydrogen peroxide (H₂O₂). This reaction leads to the formation of antimicrobial products that have a great antimicrobial spectrum, including antibacterial, antiviral, and antifungal activity, especially hypothiocyanite (OSCN⁻) and hypoiodite (OI⁻), which are coming into prominence via their high antimicrobial activity. The lactoperoxidase system (LPOS) is the system consisting of LPO, H₂O₂, and SCN⁻. LPO has a great potential to be used in various areas such as preservation and shelf-life elongation of milk; milk products; meat; meat products; plants, including fruits and vegetables; and oral care, diagnosis, immunomodulation, and treatment of nephrotoxicity. The LPO gene, along with LPO itself, is important for animals. In the absence of the LPO gene, there is an increase in the frequency of diverse diseases, including inflammation, tumor formation, and obesity. In this review, we mentioned general information about the enzyme LPO and its potential. Chemical properties and other features of other components of the LPOS, H₂O₂, and SCN⁻ were also touched on the review. To offer readers a comprehensive understanding of the enzyme’s biological significance and research progress over time, both recent and older studies have been used together. Lastly, we discussed potential applications of LPO in different areas and left future remarks in the light of recent studies. Full article

Natural rubber is a widely used biological polymer material because of its excellent comprehensive performance. Nevertheless, the performance of domestic natural rubber cannot meet the requirements for high-end products such as aviation tires, which has become a constraint on the innovation and upgrading of high-end manufacturing enterprises and the enhancement of global competitiveness in China. To solve the bottleneck problem of natural rubber processing technology, this study systematically analyzed the effects of different varieties of fresh latex ratios on the processing and dynamic properties of bio-coagulated natural rubber. By mixing PR107 and Reyan72059 fresh latex with Reyan73397 fresh latex according to proportion, the fresh latex was coagulated by enzyme-assisted microbials, and the effects of the fresh latex ratio on physical and chemical indexes, molecular weight distribution, vulcanization characteristics, processing properties, cross-link density and physical and mechanical properties of the natural rubber were analyzed. The results showed that the aging resistance of natural rubber coagulated with enzyme-assisted microbial decreased, and the aging resistance of natural rubber increased with the increase in the mixing ratio of PR107 and Reyan72059 fresh latex. The proportion of high molecular weight of the natural rubber coagulated with the enzyme-assisted microbial increased, and the fresh latex mixing had little effect on the molecular weight distribution curve. Under the carbon black formulation, the CRI of the enzyme-assisted microbial coagulated natural rubber compound was relatively larger. Under the same strain conditions, the H-3 compound (PR107:Reyan72059:Reyan73397 = 1:1:3) had the best viscoelasticity and the least internal resistance of rubber molecules. In addition, the cross-link density, tensile strength, elongation at break, and tear strength of H-3 vulcanized rubber were the largest, improved by 23.08%, 5.32%, 12.45% and 3.70% compared with the same H-2 vulcanized rubber. In addition, the heat generation performance was reduced by 11.86%, and the wear resistance improved. Full article

Vitamin D plays a vital role in human physiology, including a crucial role in regulating bone metabolism and various extra-skeletal effects. Calcitriol exerts anti-inflammatory effects on monocytes and macrophages by increasing IL-10 production and decreasing the production of proinflammatory IL-1β, IL-6, tumor necrosis factor-α (TNF-α), receptor activator of nuclear factor kappa-Β ligand (RANKL), and cyclo-oxygenase-2 (COX-2). In addition, calcitriol also exerts important effects on adaptive immunity by downregulating MHC-II class and co-stimulatory molecules on antigen-presenting cells, but it also directly affects T lymphocytes. In multiple studies, the influence of vitamin D on eye diseases, including corneal diseases, has been demonstrated. Adequate vitamin D supplementation in patients with dry eye significantly improves tear quality and consequently heals the epithelial cells of the ocular surface. Pterygium is a fibrovascular growth of conjunctival tissue that histologically consists of superficial conjunctival epithelium and an underlying fibrovascular layer. The prevalence of pterygium depends on the region. In zones closer to the equator—“pterygium zone”, it is up to 22%, and outside of them it can be even less than 2%. While UV radiation is recognized as a primary risk factor, other factors, including vitamin D, may influence its development. This review aims to summarize the effects of vitamin D on the pathophysiological mechanism of pterygium and its possible therapeutic impact. Current research suggests that vitamin D is protective through its immunomodulatory and anti-inflammatory properties. Finally, there is still insufficient evidence of the therapeutic benefit of vitamin D in pterygium, and future large-scale randomized controlled studies are needed to elucidate the exact role of vitamin D in pterygium onset and recurrence as well as its potential therapeutic benefit. Full article

Background/Objectives: Dry eye disease (DED), also known as “keratoconjunctivitis sicca”, is a common chronic ocular surface disease accompanied by inflammation and diminished tear production. Bovine Lactoferrin (BLF), a multi-functional iron-binding glycoprotein found in tears, decreased significantly in patients with DED, used for the treatment of dry eye, conjunctivitis, and ocular inflammation. BLF has limited therapeutic efficacy due to poor ocular bioavailability. Methods: This study developed and optimized a BLF-loaded nanosuspension (BLF-NS) using the Box–Behnken Design (BBD). Optimized BLF-NS was then incorporated with polyvinyl pyrrolidone (PVP) and hydroxypropyl methyl cellulose (HPMC) dissolving microneedles (MNs). The formulations were characterized by Scanning and transmission microscopy, DSC, FTIR, ex vivo studies in corneal tissue from sheep and tested for its antibacterial and antifungal efficacy against Methicillin-Resistant Staphylococcus aureus (MRSA), Staphylococcus aureus, and Aspergillus niger, respectively. Moreover, they were tested for their Benzalkonium chloride (BCL) dry eye in a rabbit model. Results: The optimized nanosuspension showed a vesicle size of (215 ± 0.45) nm, a Z.P (zeta potential) of (−28 ± 0.34) mV, and an Entrapment Efficiency (EE%) of (90 ± 0.66) %. The MNs were fabricated using a ratio of biodegradable polymers, PVP/HPMC. The resulting BLF-NS-MNs exhibited sharp pyramidal geometry with high mechanical strength, ensuring ocular insertion. In vitro release showed 95% lactoferrin release over 24 h, while ex vivo permeation achieved 93% trans-corneal delivery. In vivo, BLF-NS-MNs significantly reduced pro-inflammatory cytokines (TNF-α, IL-6, MMP-9, IL-1β, MCP-1) and upregulated antioxidant and anti-inflammatory genes (PPARA, SOD 1), restoring their levels to near-normal (p < 0.001). Conclusions: The nanosuspension combined with MNs has shown higher ocular tolerance against DED ensured by the Draize and Schirmer Tear Test. Full article

This study investigates the recycling of ophthalmic lens waste (OLW) in the production of vulcanized natural rubber (NR) composites, aiming to promote sustainability and reduce costs. To this end, Vietnamese natural rubber and ophthalmic lens waste were used, varying the filler content from 0 to 50 phr. Rheological tests demonstrated that the addition of OLW decreases the cure time. The crosslink density, assessed through the Flory–Rehner and Mooney–Rivlin methods, exhibited an increase with the incorporation of a reinforcement. Thermal and spectroscopic analyses demonstrated the thermal stability of the composites and the absence of chemical interactions between the polymer matrix and the OLW. Mechanical tests showed that the composites exhibit satisfactory tensile and tear resistance, although the filler primarily acts as a filler rather than a structural reinforcement. Thus, the incorporation of OLW in NR composites emerges as a viable alternative for the reuse of industrial waste, fostering more sustainable and efficient practices in the polymer industry. Full article

The electric drive is strategically placed in the power industry. It is exposed to wear and tear, defects, and constructional damage, as is any technical device. An information–analytical system is presented in this work. It performs the tasks of monitoring, diagnostics, general assessment of technical condition, and continuous assessment of energy and mechanical efficiency of the electric drive based on the analysis of immediate values of currents and voltages. The system modules are finished products with practical application, which are supported by experimental validation. This article contains a detailed description of the methods implemented in the system development, as well as a description of the laboratory bench and equipment used in our experiments. The information–analytical system is shown and proved on the basis of a fault reconstruction example with electric drive misalignment. According to the obtained results, recommendations for preventive control and proposals for development in this direction are formulated. Full article