Search Results (26)

Background: Nasal glioma (NG), also known as nasal glial heterotopia, is an extremely rare congenital anomaly characterized by the presence of mature glial tissue outside the cranial cavity. Most patients present with midline craniofacial malformations at birth. However, a small subset of them is entirely intranasal and have no accompanying visible features. We present an unusual case of delayed diagnosis of NG, in tandem with a systematic literature review. Methods: A previously well 2-year-old male presented with obstructive apnea secondary to an intranasal mass. Neuroimaging of his paranasal sinuses demonstrated a bony defect in the anterior cribriform plate with herniation of a soft tissue structure into the right nasal cavity. He underwent craniotomy, total excision of the lesion and repair of skull base defect. His postoperative period was uneventful with resolution of his symptoms. Histology reported infiltrates of mature glial tissue with rare neurons forming the excised nasal mass. We conducted a structured literature review using PRISMA guidelines to evaluate clinical features of NG. Results: A comprehensive search of PubMed and Scopus databases featured 133 published cases of NG relevant to our case. Overall, NG is more common in males, with most cases diagnosed within the first year of life. Clinical presentation usually involved an external nasal mass (82.8%) and/or respiratory symptoms (28.7%), with prenatal detection reported in a subset of cases. Magnetic resonance imaging was the preferred imaging modality. Surgical excision was the mainstay of treatment. Postoperative outcomes were favorable in most patients, with 84.7% showing no complications or recurrence. Incomplete excision was associated with recurrence (10%). Conclusions: We present an intranasal case of NG with late diagnosis that was successfully managed with surgery. Our review underscores the importance of early imaging, accurate diagnosis, and complete surgical resection for best outcomes in affected children. Full article

Human whole saliva contains informative proteins related to disease processes and is important for oral cavity homeostasis. The aim of this study was to investigate the global salivary proteomic profile, including functional enrichment analysis of individuals affected by combinations of poorly/well-controlled type 2 diabetes mellitus (T2DM), dyslipidemia (DL), and periodontitis (P) for the identification of potential disease biomarkers. Biochemical and periodontal evaluations were performed on 150 subjects divided into five groups according to disease combinations. Unstimulated saliva was collected, and proteomic analysis was performed using Liquid Chromatography Electrospray Ionization Tandem Mass Spectrometry (LC-ESI-MS/MS). Results were obtained by searching for the Homo sapiens database of the UniProt catalog using Proteome Discoverer 1.3. PANTHER GO-Slim (PANTHER version 19.0), and Cytoscape 3.10.1 (extensions Metascape) were used to access biological pathways. A total of 1762 proteins were identified in saliva samples. The proteomic profile of T2DM-DL-P groups (G1—poorly controlled T2DM; G2—well-controlled T2DM) were the most diverse and functionally enriched. In G1 and G3, the most abundant protein was TTN, with ENO-1 being highly enriched and associated with the aerobic glycolysis pathway and PFN1 associated with a pro-inflammatory environment. PFN1 was highly enriched in (G1) AKIRIN-2 (immune response), and in (G2) KMT2A (epigenetic regulation) and CALML3 (DNA metabolism and repair). For (G4), the highest abundant protein was RIMS-1, with VIRMA (cytoskeletal organization) being the most enriched. The global salivary proteomics analyses demonstrated significantly altered protein profiles in each group of different pathological combinations, providing new insights into their biology and identifying potential diagnostic and therapeutic candidates for these diseases of growing global concern. Full article

The cat oral microbiome plays an important role in maintaining host health, yet little is known about how to apply microbial data in a clinical setting. One such use of microbiome signatures is in cases of feline chronic gingivostomatitis (FCGS), a severe debilitating complex disease of the oral cavity. FCGS-afflicted cats have limited treatment options, and individual patient responses to treatment are needed. In this work, we used deep sequencing of total RNA of the oral microbiome to chronicle microbial changes that accompanied an FCGS-afflicted cat’s change from treatment-non-responsive to treatment-responsive within a 17-month span. The oral microbiome composition of the two treatment-non-responsive time points differed from that of the treatment-responsive point, with notable shifts in the abundance of Myscoplasmopsis, Aspergillus, and Capnocytophaga species. Intriguingly, the presence of the fungal groups Aspergillus and Candida primarily differentiated the two non-responsive microbiomes. Associated with responder status were multiple Capnocytophaga species, including Capnocytophaga sp. H2931, Capnocytophaga gingivalis, and Capnocytophaga canimorsus. The observation that the oral microbiome shifts in tandem by response to treatment in FCGS suggests a potential use for microbiome evaluations in a clinical setting. This work contributes to developing improved molecular diagnostics for enhanced efficacy of individualized treatment plans to improve oral disease. Full article

This study examined the multi-phase flow field for a single object and two parallel/series objects under different incoming angles of lateral flow. The volume of fluid model, the Sauer–Schnerr cavitation model, and the six degrees of freedom (DOF) method were adopted to consider simulations of multi-phase flow, phase change, and object movement, respectively. The results show that, for a single object, the degree of asymmetry in the cavity profile depends on the component (the z-component) of the lateral inflow velocity in the direction perpendicular to the initial velocity of the object. As this component increases, the asymmetry of the cavity increases. The cavity length is related to the relative axial speed between the object and the water. For parallel objects, the cavity asymmetry is determined by the superimposed influence of the z-component of the lateral incoming speed and the high-pressure zone induced by the nearby object. The object located downstream relative to the lateral flow has a stronger cavity asymmetry than that of the upstream object, and the trajectory of the downstream object is more easily deviated than that of the upstream object. For tandem objects, with the increase in the lateral incoming angle, the supercavity length increases after the rear object enters into the front cavity. With the increase in the z-component of the lateral flow velocity, the deviation speed increases. Full article

Protein hydrolysates from sea cucumber (Apostichopus japonicus) gonads are rich in active materials with remarkable angiotensin-converting enzyme (ACE) inhibitory activity. Alcalase was used to hydrolyze sea cucumber gonads, and the hydrolysate was separated by the ultrafiltration membrane to produce a low-molecular-weight peptide component (less than 3 kDa) with good ACE inhibitory activity. The peptide component (less than 3 kDa) was isolated and purified using a combination method of ACE gel affinity chromatography and reverse high-performance liquid chromatography. The purified fractions were identified by liquid chromatography–tandem mass spectrometry (LC–MS/MS), and the resulting products were filtered using structure-based virtual screening (SBVS) to obtain 20 peptides. Of those, three noncompetitive inhibitory peptides (DDQIHIF with an IC₅₀ value of 333.5 μmol·L⁻¹, HDWWKER with an IC₅₀ value of 583.6 μmol·L⁻¹, and THDWWKER with an IC₅₀ value of 1291.8 μmol·L⁻¹) were further investigated based on their favorable pharmacochemical properties and ACE inhibitory activity. Molecular docking studies indicated that the three peptides were entirely enclosed within the ACE protein cavity, improving the overall stability of the complex through interaction forces with the ACE active site. The total free binding energies (ΔG_total) for DDQIHIF, HDWWKER, and THDWWKER were −21.9 Kcal·mol⁻¹, −71.6 Kcal·mol⁻¹, and −69.1 Kcal·mol⁻¹, respectively. Furthermore, a short-term assay of antihypertensive activity in spontaneously hypertensive rats (SHRs) revealed that HDWWKER could significantly decrease the systolic blood pressure (SBP) of SHRs after intravenous administration. The results showed that based on the better antihypertensive activity of the peptide in SHRs, the feasibility of targeted affinity purification and computer-aided drug discovery (CADD) for the efficient screening and preparation of ACE inhibitory peptide was verified, which provided a new idea of modern drug development method for clinical use. Full article

Tetrodotoxin (TTX), an extremely potent low-molecular-weight neurotoxin, is widespread among marine animals including ribbon worms (Nemertea). Previously, studies on the highly toxic palaeonemertean Cephalothrix cf. simula showed that toxin-positive structures are present all over its body and are mainly associated with glandular cells and epithelial tissues. The highest TTXs concentrations were detected in a total extract from the intestine of the anterior part of the body and also in a total extract from the proboscis. However, many questions as to the TTXs distribution in the organs of the anterior part of the worm’s body and the functions of the toxins in these organs are still unanswered. In the present report, we provide additional results of a detailed and comprehensive analysis of TTXs distribution in the nemertean’s proboscis, buccal cavity, and cephalic gland using an integrated approach including high-performance liquid chromatography–tandem mass spectrometry (HPLC–MS/MS), confocal laser scanning microscopy with anti-TTX antibodies, light and electron microscopies, and observations of feeding behavior. For the proboscis, we have found a TTXs profile different from that characteristic of other organs and tissues. We have also shown for the first time that the major amount of TTXs is localized in the anterior part of the proboscis that is mainly involved in hunting. TTX-containing glandular cells, which can be involved in the prey immobilization, have been found in the buccal cavities of the nemerteans. A significant contribution of the cephalic gland to the toxicity of this animal has been shown for the first time, and the role of the gland is hypothesized to be involved not only in protection against potential enemies but also in immobilizing prey. The data obtained have made it possible to extend the understanding of the role and features of the use of TTXs in the organs of the anterior part of nemertean’s body. Full article

Oral mucositis is a common distressing complication of cancer therapy, characterised by painful sores within the oral cavity. Current management options offer limited symptomatic relief. Curcumin, a natural polyphenolic compound with recognised anti-inflammatory and antioxidant properties, has emerged as a potential protective agent against oral mucositis. This study explores the therapeutic potential of curcumin in mitigating the impact of oral mucositis by investigating a commercially available curcumin-based oral gel, PerioGold^®. Liquid chromatography–tandem mass spectrometry was used to characterise the main constituents of PerioGold^®. The cytotoxicity of curcumin constituent was investigated in four cell lines: primary oral keratinocytes (HOKs), immortalised oral keratinocytes (OKF6), dysplastic oral keratinocytes (DOKs), and oral squamous cell carcinoma cells (PE/CA-PJ15). Concentrations of hydrogen peroxide were optimised to develop in vitro models that mimic oral mucositis. The inhibitory effects of PerioGold^® against the production of reactive oxygen species were assessed using a designated kit. OKF6 cells were the most sensitive to oxidative stress, while PE/CA-PJ15 cells showed the highest resistance. Pretreatment of the investigated cells for 24 h with PerioGold^® demonstrated a significant antioxidative effect in all cells based on a dose–response pattern. PerioGold^® exhibits clinical potential for protecting against oxidative stress, warranting further individualised clinical investigations. Full article

In this study, the presence of 11-nor-Δ⁹-carboxy tetrahydrocannabinol (THC-COOH) in postmortem fluid obtained from the chest cavity (FCC) of postmortem cases collected from drug-related fatalities or criminal-related deaths in Jeddah, Saudi Arabia, was investigated to evaluate its suitability for use as a complementary specimen to blood and biological specimens in cases where no bodily fluids are available or suitable for analysis. The relationships between THC-COOH concentrations in the FCC samples and age, body mass index (BMI), polydrug intoxication, manner, and cause of death were investigated. Methods: Fifteen postmortem cases of FCC were analyzed using fully validated liquid chromatography-positive-electrospray ionization tandem mass spectrometry (LC-MS/MS). Results: FCC samples were collected from 15 postmortem cases; only THC-COOH tested positive, with a median concentration of 480 ng/mL (range = 80–3010 ng/mL). THC-COOH in FCC were higher than THC-COOH in all tested specimens with exception to bile, the median ratio FCC/blood with sodium fluoride, FCC/urine, FCC/gastric content, FCC/bile, FCC/liver, FCC/kidney, FCC/brain, FCC/stomach wall, FCC/lung, and FCC/intestine tissue were 48, 2, 0.2, 6, 4, 6, 102, 11, 5 and 10-fold, respectively. Conclusion: This is the first postmortem report of THC-COOH in the FCC using cannabinoid-related analysis. The FCC samples were liquid, easy to manipulate, and extracted using the same procedure as the blood samples. The source of THC-COOH detected in FCC could be derived from the surrounding organs due to postmortem redistribution or contamination due to postmortem changes after death. THC-COOH, which is stored in adipose tissues, could be a major source of THC-COOH found in the FCC. Full article

In the last decade, plastic waste has become one of the main threats to marine ecosystems and their biodiversity due to its abundance and increased persistence. Microplastics can be classified as either primary, i.e., fabricated for commercial use, or secondary, i.e., resulting from the fragmentation/weathering processes of larger plastic pieces in the environment. In general, microplastics are detected in a number of aquatic organisms (e.g., fish, bivalves, mollusks, etc.) with alarming effects on their health. Therefore, the present work focuses on the detection and identification of microplastics in fish species (Dicentrarchus labrax, Sparus aurata) and mussels (Mytilus galloprovincialis) from aquaculture systems since these aquatic organisms are largely commercially available for consumption. In addition, seawater was also screened for the types of polymers present as well as their aging. The experimental protocol for biota samples contains a digestion step using Fenton’s reagent (0.05 M FeSO₄⋅7H₂O with 30% H₂O₂ at a volume ratio of 1:1) to remove organic material followed by filtration and a density separation step where the sample material was mixed with a saturated ZnCl₂ solution to separate microplastic particles from heavier material. For seawater samples (sampled by a microplastic net sampler), only sieving on stainless steel sieves followed by filtration on silica filters was applied. Detection of microplastics and identification of their polymeric composition was achieved through the combined use of micro-Raman analysis, Attenuated Total Reflectance–Fourier Transform Infrared spectroscopy, and Scanning Electron Microscopy in tandem with Energy Dispersive X-ray spectroscopy. Microplastic abundance was 16 ± 1.7 items/individual in mussels and 22 ± 2.1 items/individual in sea bass, and 40 ± 3.9 items/individual in sea bream, with polyethylene (74.4%) being the most detected polymer type, while polyethylene-co-vinyl acetate (65%), polyvinyl-butyral (36.8%), polyvinyl alcohol (20%), and polybutyl methacrylate (15.8%) were also detected to a lesser extent. The microplastics isolated from seawater samples were films (30%), fragments (30%), and fibers (20%), while some of them were derived from foams (20%). Also, in most of these seawater-recovered microplastics, a relatively high degree of oxidation (carbonyl index > 0.31) was observed, which was further confirmed by the results of Energy Dispersive X-ray spectroscopy. Finally, the Scanning Electron Microscopy images showed various morphological characteristics (cracks, cavities, and burrs) on the surfaces of the microplastics, which were attributed to environmental exposure. Full article

Acute lymphocytic leukemia (ALL) is the most frequent form of all childhood leukemias, mostly affecting children between 2 and 4 years old. Oral symptoms, such as mouth ulcers, mucositis, xerostomia, Herpes or Candidiasis, gingival enlargement and bleeding, petechiae, erythema, mucosal pallor and atrophic glossitis, are very common symptoms of ALL and can be early signs of the disease. Secondary and tertiary complications, a direct effect of chemo and radiotherapy, are associated with more severe bleeding, higher susceptibility to infections, ulcerations, inflammation of the mucous membranes, osteoradionecrosis, xerostomia, taste alterations, trismus, carious lesions and dental abnormalities. Immunotherapy, though less toxic, causes oral dysesthesia and pain. Overall, the effects in the oral cavity are transient but there are long-term consequences like caries, periodontal disease and tooth loss that impair endodontic and orthodontic treatments. Also, dental abnormalities resulting from disturbed odontogenesis are known to affect a child’s quality of life. The medical dentist should identify these complications and perform appropriate oral care in tandem with other health professionals. Thus, poor oral hygiene can lead to systemic ALL complications. The aim of this review is to describe the oral complications in children with ALL who are undergoing chemo, radio or immunotherapy. Full article

This experimental investigation focused on the ignition and combustion characteristics of a tandem cavity-based scramjet combustor with side-by-side identical cavities. This study utilized the Pusan National University-direct connect scramjet combustor (PNU-DCSC), which was capable of simulating flight conditions at Mach number 4.0–5.0 and altitudes of 20–25 km using the vitiated air heater (VAH). The combustion tests were conducted under off-design point conditions corresponding to low inlet enthalpy. It is a condition in which self-ignition does not occur, and a micro pulse detonation engine (μPDE) ignitor is used. The results revealed that as the injection pressure of the gaseous hydrogen fuel (GH₂) and the corresponding equivalence ratio increased, the combustion mode transitioned from the cavity-shear layer flame to the jet-wake flame. Furthermore, the measured wall static pressure profiles along the isolator and scramjet combustor indicated that the region of elevated pressure distribution caused by the shock train expanded upstream with higher equivalence ratios. When ignited from the secondary cavity, the combustion area did not extend to the primary cavity at lower equivalence ratios, while it expanded upstream faster with higher equivalence ratios. Therefore, the combustion characteristics of the tandem cavity were found to vary based on the overall equivalence ratio of the main fuel (GH₂) and ignition position. Full article

Background. CAD/CAM technologies facilitate using powder CoCr alloys to produce metal-ceramic dental restorations. However, base alloys may induce oxidative stress in the oral cavity due to corrosion and ion release. This study evaluated resistance to corrosion and release of metal ions from 3D printed CoCr dental alloy and their effect on oral oxidative stress. Methods. Metal-ceramic crowns with 3D printed copings from CoCr alloy EOS CobaltChrome SP2 (EOS, Germany) were fabricated for 35 patients. Inductively coupled plasma mass spectrometry (ICP-MS) was used for measuring the concentration of Co and Cr ions in non-stimulated saliva before prosthetic treatment (BPT), at 2 h and 7 days after the dental treatment (APT2, APT7, respectively). Open circuit potentials (Eocp) were evaluated at APT2 and APT7. Estimating oral oxidative stress, measurements of 8-isoprostaglandin F2-alpha were conducted using liquid chromatography-tandem mass spectrometry (LC-MS/MS) at stages BPT, APT2, and APT7. Results. Salivary Co level increased at APT2 and decreased to the initial levels at APT7. No statistical difference was found between the levels of 8-isoPGF2-alpha measured, and between the Eocp measurements at APT2 and APT7. Conclusions. The studied alloy showed stable corrosion resistance and the metal ion release did not induce oral oxidative stress. Full article

The production of aerogels for different applications has been widely known, but the use of polysaccharide-based aerogels for pharmaceutical applications, specifically as drug carriers for wound healing, is being recently explored. The main focus of this work is the production and characterization of drug-loaded aerogel capsules through prilling in tandem with supercritical extraction. In particular, drug-loaded particles were produced by a recently developed inverse gelation method through prilling in a coaxial configuration. Particles were loaded with ketoprofen lysinate, which was used as a model drug. The core-shell particles manufactured by prilling were subjected to a supercritical drying process with CO₂ that led to capsules formed by a wide hollow cavity and a tunable thin aerogel layer (40 μm) made of alginate, which presented good textural properties in terms of porosity (89.9% and 95.3%) and a surface area up to 417.0 m²/g. Such properties allowed the hollow aerogel particles to absorb a high amount of wound fluid moving very quickly (less than 30 s) into a conformable hydrogel in the wound cavity, prolonging drug release (till 72 h) due to the in situ formed hydrogel that acted as a barrier to drug diffusion. Full article

In this paper, the supercavitation of the parallel and tandem projectiles moving underwater with high-speed under the condition with/without lateral flows is numerically simulated by the volume of fraction (VOF) model. The motion of the projectiles was handled by the overlapping grid and six degrees of freedom (DOF) techniques. The supercavitation evolution and the hydrodynamic characteristics of the projectiles were analyzed for the parallel and tandem projectiles under different conditions. The results show that the cavity shape is symmetrical under the condition without lateral flows, but is no longer symmetrical under the conditions with lateral flows. The asymmetry of the cavity contour increases with the velocity of the lateral flow. For the parallel projectiles, the change trends of the axial velocity of projectile 1 and projectile 2 are nearly the same. The offset velocity of projectile 1 and projectile 2 increases with the increase in the velocity of the lateral flow. The deflection angle of projectile 1 decreases with the increase in the lateral flow velocity but that of projectile 2 increases with the increase in the lateral flow velocity. At t = 3.0 ms, the deflection angle of projectile 2 is up to 20° under the condition of the lateral flow velocity of 11.25%, while the deflection angle of projectile 1 and 2 under other conditions is in the range of 5°. For the tandem projectiles, the axial velocity of projectile 1 gradually decreases. The change trend of the axial velocity of projectile 2 at first is the same as that of projectile 1, and then the change is dependent on the velocity of the lateral flow. Under the condition of the lateral flow velocity with 11.25%V_p, projectile 2 cannot enter the cavity of the front projectile. The change trend of the axial velocity of projectile 2 is similar as but somewhat slower than that of projectile 1. For the parallel projectiles, the ballistic stability of the projectile on the oncoming side is better than that of the projectile on the backflow side. Whether parallel or tandem projectiles, the ballistic stability of projectile 2 becomes worse with the increase in the lateral flow velocity. Full article

Cyclodextrins are cyclic oligosaccharides that have received special attention due to their cavity-based structural architecture that imbues them with outstanding properties, primarily related to their capacity to host various guest molecules, from low-molecular-mass compounds to polymers. Cyclodextrin derivatization has been always accompanied by the development of characterization methods, able to unfold complicated structures with increasing precision. One of the important leaps forward is represented by mass spectrometry techniques with soft ionization, mainly matrix-assisted laser desorption/ionization (MALDI) and electrospray ionization (ESI). In this context, esterified cyclodextrins (ECDs) benefited also from the formidable input of structural knowledge, thus allowing the understanding of the structural impact of reaction parameters on the obtained products, especially for the ring-opening oligomerization of cyclic esters. The current review envisages the common mass spectrometry approaches such as direct MALDI MS or ESI MS analysis, hyphenated liquid chromatography-mass spectrometry, and tandem mass spectrometry, employed for unraveling the structural features and particular processes associated with ECDs. Thus, the accurate description of complex architectures, advances in the gas phase fragmentation processes, assessment of secondary reactions, and reaction kinetics are discussed in addition to typical molecular mass measurements. Full article