Search Results (75)

This study evaluates the bioadsorption efficiency of sugarcane bagasse (SCB) for removing pharmaceuticals and illicit drugs—such as acetaminophen, atenolol, caffeine, carbamazepine, diclofenac, orphenadrine, losartan, enalapril, citalopram, cocaine, and benzoylecgonine—from wastewater effluents. In Brazil, where 46% of the population lacks access to sewage systems, and over 5.3 billion pharmaceutical packages are consumed annually, untreated discharges contribute significantly to aquatic contamination. Results show that applying SCB biochar at a 1% (m/v) ratio removes up to 99.8% of these compounds at total concentrations of 140 ng mL⁻¹, reducing the ecological risk from high to low for caffeine and losartan. SCB offers several advantages as a bioadsorbent: it is abundant, non-toxic, inexpensive, easy to handle, and exhibits high adsorption capacity and rapid kinetics across a wide range of chemical polarities. These findings highlight SCB’s potential as a sustainable and efficient material for wastewater treatment applications. Full article

This work focused on the development of eco-friendly bio-composites based on polylactic acid (PLA) and sugarcane bagasse (SCB) as a natural fiber from Moroccan vegetable waste. First, the fiber surface was treated with an alkaline solution to remove non-cellulosic components. Then, the composite materials with various amounts of treated sugarcane bagasse (TSCB) were fabricated using two routes, melt processing and solvent casting. The primary objective was to achieve high fiber dispersion/distribution and homogeneous bio-composites. The dispersion properties were analyzed using scanning electron microscopy (SEM). Subsequently, the thermal, mechanical, and melt shear rheological properties of the obtained PLA-based bio-composites were investigated. Through a comparative approach between the dispersion state of fillers with extrusion/injection molding and solvent casting method, the work aimed to identify the most suitable processing route for producing PLA-based composites with optimal dispersion, improved thermal stability, and mechanical reinforcement. The results support the potential of TSCB fibers as an effective bio-based additive for PLA filament production, paving the way for the development of eco-friendly and high-performance materials designed for 3D printing applications. Since the solvent-based route did not allow further improvement and presents clear limitations for large-scale or industrial implementation, the transition toward 3D printing became a natural progression in this work. Material extrusion offers several decisive advantages, notably the ability to preserve the original morphology of the fibers due to the moderate thermo-mechanical stresses involved, and the possibility of manufacturing complex geometries that cannot be obtained through conventional injection molding. Although some printing defects may occur during layer deposition, the mechanical properties obtained through 3D printing remain promising and demonstrate the relevance of this approach. Full article

Sugarcane bagasse (SCB) is a lignocellulosic byproduct with low biodegradability, limiting its potential for biological processes such as biogas production. The objective of this study was to evaluate whether a short-term biological pretreatment with the cellulolytic bacterium Proteus mirabilis KC94 could enhance SCB hydrolysis, improve nutrient balance, and increase biomethane potential (BMP). Three treatments were compared: untreated bagasse (UB), sterilized bagasse (SB), and KC94-pretreated bagasse (PB). Glucose release was highest in PB (61.83 ± 0.8 mg/mL), indicating enhanced cellulose degradation in PB relative to UB (53.19 ± 0.9 mg/mL) and SB (44.00 ± 0.5 mg/mL). Elemental analysis revealed a more balanced nutrient profile in PB, characterized by optimal carbon and nitrogen levels, and reduced sulfur content, indicating microbial assimilation and potential biological desulfurization. Scanning electron microscopy revealed pronounced structural disruption, increased porosity, and fiber delamination in PB, confirming the efficacy of KC94-mediated lignocellulosic pretreatment. BMP assays conducted over a 31-day incubation period revealed that PB produced the highest cumulative methane yield (99 ± 0.7 mL CH₄/g VS), representing 19% and 25% increases over UB and SB, respectively. PB biomethanation was also faster compared to the other two substrates. These findings demonstrate the novelty of a 5-day bacterial pretreatment strategy, which significantly improves lignocellulosic hydrolysis and methane yield. Specifically, P. mirabilis KC94 pretreatment increased glucose release by 16–40% and cumulative methane yield by 19–25% compared to untreated and sterilized controls. This cost-effective and environmentally friendly approach highlights the potential of P. mirabilis KC94 to valorize sugarcane bagasse, advancing sustainable energy recovery and circular bioeconomy practices. Full article

Fine and ultra-fine sugarcane bagasse (SCB) fractions (≤200 μm) that are naturally generated during industrial grinding have been systematically overlooked in lignocellulosic pretreatment research. Previous studies have largely relied on commercially processed pulps or coarse particles (>200 μm), typically without systematic size fractionation. Here, we demonstrate that these fine fractions—including ultra-fines (≤45 μm), which are often excluded from analytical workflows due to concern about excessive degradation—are viable feedstocks for producing lignin-containing cellulose nanofibers (LCNF) via a sequential thermal hydrolysis treatment (THT)–deep eutectic solvent (DES) pretreatment specifically designed to retain lignin. Size-fractionated SCB (≤45, 45–100, and 100–200 μm) was subjected to THT (190 °C, 15 min), followed by DES treatment using choline chloride/urea (1:2 molar ratio, 130 °C, 2 h). Multi-technique characterization using Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and X-ray diffraction (XRD) indicated substantial hemicellulose removal (>70%), effective lignin retention (7.6–9.1%), cellulose enrichment (74.0–77.5%), and preservation of cellulose I structure allomorph. The crystallinity index increased from 46.5–52.7% after THT to 56.7–57.2% after DES treatment, and notably, uniform compositional and structural features were obtained across all particle size classes after DES treatment. Subsequent high-pressure microfluidization (700 bar, five passes) yielded LCNF with consistent morphology across all fractions: uniform fibril diameters (24.6–26.2 nm), a discernible lignin coating, and excellent colloidal stability (zeta potential: −86.3 to −95.0 mV). Field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) confirmed well-dispersed nanofibrous networks. Collectively, these findings show that the full range of fine SCB fractions can be effectively valorized into high-performance LCNF through sequential THT–DES pretreatment, enabling comprehensive utilization of industrial grinding outputs and advancing circular bioeconomy objectives. Full article

Sugarcane bagasse (SCB), a major byproduct of the sugar industry produced in millions of tons annually, is traditionally burned for energy but holds untapped potential for sustainable valorization amid global shifts toward renewable resources and reduced fossil fuel reliance. This review synthesizes recent advancements in SCB applications beyond energy, emphasizing bioenergy, bioplastics, construction materials, and agriculture to advance circular economy principles—addressing a gap in the existing literature by providing a holistic, comparative analysis of processing technologies, including their efficiency, costs, and scalability, which prior reviews have overlooked. Drawing from scientific literature, industry reports, case studies, and datasets, we evaluate SCB’s composition (40–50% cellulose, 25–30% hemicellulose, 20–25% lignin) and processing methods (e.g., pretreatment, hydrolysis, gasification, pyrolysis). Key findings highlight versatile applications: bioethanol production yielding 40–70% GHG reductions per life cycle assessments; pulp/paper substitution reducing water and chemical use; nanocellulose composites for automotive and medical sectors; particleboard and ash-cement in construction cutting deforestation and carbon footprints by ~20%; and biochar/processed feed enhancing crop yields by 25% while amending soil. Unlike previous reviews focused on isolated applications, this work integrates environmental, economic, and regulatory insights, identifying challenges like standardization gaps and proposing pathways for commercialization to drive scalable, green industry transitions. Continued research and policy support are essential for realizing SCB’s role in sustainable development. Full article

The insistent presence of detrimental chemical dyes, such as methylene blue (MB), in aquatic ecosystems creates a significant environmental fear that requires the development of innovative and effective remediation methods. This study examines the production and application of a novel carboxylate cellulose nanocrystal-silica-titanium dioxide (CCNC-silica-TiO₂) hybrid composite aerogel designed to enhance the photocatalytic degradation of methylene blue (MB). Carboxylic groups were incorporated into cellulose nanocrystals (CNCs) derived from sugarcane bagasse (SCB) waste to improve their dye adsorption capacity. The CCNCs were later incorporated into a silica aerogel matrix using a sol–gel method, followed by the introduction of TiO₂ nanoparticles. Characterization techniques, including FTIR and XRD, confirmed the successful chemical functionalization and composite synthesis. SEM analysis revealed a highly porous three-dimensional architecture, whilst BET surface area assessment showed that the CCNC-SiO₂-TiO₂ aerogel possessed a significant specific surface area of 448.69 m²/g. Under ultraviolet light, the hybrid aerogel demonstrated remarkable photocatalytic performance, achieving a 93% degradation rate of methylene blue, far above the 22% recorded in a CCNC-silica control. The degradation kinetics followed a pseudo-first-order model. The composite demonstrated significant reusability, maintaining over 70% efficiency after five consecutive cycles. The findings indicate that the adsorptive capacity of carboxylate CNCs, together with the photocatalytic efficiency of TiO₂, improves the efficacy, stability, and longevity of the CCNC-SiO₂-TiO₂ aerogel in wastewater treatment. Full article

This study aimed to isolate and identify fungi capable of producing xylanases and cellulases. Thirty-eight fungal strains were isolated from decaying water hyacinth (WH), and two were selected based on their superior enzyme production under solid-state fermentation (SSF). The strains were identified through morphological, cultural, and molecular analyses as Aspergillus austwickii B6 and Trichoderma harzianum M7. Their ribosomal ITS sequences were deposited in GenBank under accession numbers PQ142799.1 for A. austwickii B6 and PQ007458.1 for T. harzianum M7. Enzyme production was evaluated under SSF using eight culture medium variants prepared with natural or pretreated biomasses of WH and sugarcane bagasse (SCB), combined with either NaNO₃ or (NH₄)₂SO₄ as nitrogen sources. The maximum xylanase and cellulase activities were 752 and 65 U/g dry matter (DM), respectively, for A. austwickii B6, and 1724 and 152 U/g DM for T. harzianum M7, when cultivated on a low-cost medium composed of pretreated WH, (NH₄)₂SO₄, and a simple mineral salt solution. These findings highlight the potential of locally isolated fungal strains and lignocellulosic residues as cost-effective substrates and inducers of xylanase and cellulase production under SSF and underscore the importance of WH pretreatment to enhance substrate availability and maximize enzyme yields. Full article

In this study, the effects of composting phase and bulking agent on macronutrient extraction and the chemical, physicochemical, and biological properties of 20 compost teas from poultry waste composting mixtures were evaluated. Phosphorus (P) extraction was more efficient during stabilization after the thermophilic phase; however, water-soluble P declined as composting progressed. K was more amenable to extraction, with yields ranging from 30% to 70%, followed by N (2% to 12%) and P (1% to 7%). Compost tea quality was clearly affected by both the bulking agent and the composting stage. Bulking agents that accelerate the process, such as cotton waste (CW) and Napier grass (NG), contributed to nutrient mineralization, increasing availability in the compost tea but also raising salt contents responsible for phytotoxicity. In contrast, tree trimmings (TT), sawdust (S), and sugarcane bagasse (SCB) showed better results, striking a balance between nutrient availability and salt content. The period between the thermophilic phase and cooling was the most suitable for extraction, providing the greatest contribution of water-soluble nutrients. This study highlights the influence of bulking agents and composting phases on nutrient extraction and phytotoxicity of compost teas and provides new insights into the role of electrical conductivity as a threshold indicator for safe agricultural application. Full article

Bioethanol manifests an extraordinary potential to overcome the severe energy crises and reliance on fossil fuels, yet it supports the sustainable and cost-effective production of fuels for automobile engines and contributes to the reduction of greenhouse gas (GHG) emissions and other global climate-related challenges. The present study examines the potential of Mixed Lignocellulosic Biomass (MLB) as a sustainable feedstock for the consistent year-round production of bioethanol. The primary MLB sources considered in this research to underscore the significance of this heterogeneous strategy include sweet sorghum bagasse (SSB), sugarcane bagasse (SCB), and date palm trunk (DPT). Each of the three feedstocks, i.e., SSB, SCB, and DPT, were individually subjected to alkaline pretreatment, a step aimed at breaking down structural barriers and facilitating greater release of fermentable sugars during fermentation. Likewise, the alkaline-pretreated biomasses were subjected to simultaneous saccharification and fermentation (SSF) for 96 h, both individually as well as in various combined proportions. Individually, pretreated sweet sorghum bagasse (SSB) fibers produced the highest ethanol concentration, of 30.79 ± 0.44 g/L; an ethanol yield of 0.40 ± 0.62 g/g; an ethanol productivity of 0.42 ± 0.87 g/L/h; and a theoretical ethanol yield of 79.81% at 72 h. In contrast, the combination of MLB (50% of pretreated SSB and 50% of DPT fibers) produced a significantly higher ethanol concentration of 31.47 ± 0.57 g/L and an ethanol productivity of 0.653 ± 0.24 g/L/h in much less time, i.e., 48 h of SSF fermentation. The empirical data confirms that MLB offers a sustainable paradigm for ethanol biosynthesis by curtailing fermentation time and optimizing economic and operational efficacy. Full article

The global demand for sustainable energy has accelerated the development of biofuels, aiming to reduce fossil fuel reliance and environmental impact. Second-generation ethanol (2G), produced from lignocellulosic biomass such as sugarcane bagasse and straw, is a promising alternative aligned with the circular economy. Its production relies on pretreatments to improve the enzymatic access to polysaccharides. Among the available methods, the organosolv (O) and hydrothermal (H) pretreatments are effective in separating the biomass into cellulose-rich pulps and hemicellulosic liquors. In this study, these pretreatments were applied to sugarcane bagasse (SCB) and straw (SS), aiming to obtain hemicellulosic fractions for bioconversion. The characterization of pretreated biomasses showed increased cellulose content, indicating successful delignification. After the lignin precipitation, the hemicellulosic liquors were submitted to enzymatic hydrolysis, with increases in the total reducing sugar (TRS) concentrations, from 11.144 to 13.440 g·L⁻¹ (SBO), 16.507 to 22.492 g·L⁻¹ (SBH), 8.560 to 9.478 g·L⁻¹ (SSO), and 14.164 to 22.830 g·L⁻¹ (SSH), with highlights for the hydrothermal pretreated hydrolysates in the improvement of sugar release. HPLC confirmed these gains, notably in the xylose content. The results indicated the potential of hemicellulosic liquors for the fermentation of pentoses, supporting integrated bioethanol production. This approach promotes the efficient use of agro-residues and strengthens the role of biofuels in low-carbon and sustainable energy systems. Full article

Rising global populations, infrastructural development, and rapid urbanization have heightened the reliance on a linear economy, resulting in severe environmental and human impacts. This crisis has triggered an urgent quest for sustainable and ecologically benign innovations, as outlined in the United Nations’ Sustainable Development Goals (SDGs). This review investigates the potential of sugarcane bagasse (SCB) as a promising feedstock for advancing circular bioeconomy initiatives in South Africa. It shows how this copious bioresource can be utilized to enhance the country’s biobased value chains by producing bio-commodities, such as biofuels and platform chemicals. The review also identifies the driving forces behind the circular bioeconomy model within the South African sugarcane industry. To achieve the circular bioeconomy, it outlines essential technological prerequisites, including critical pretreatment strategies and emerging bio-innovations necessary for the effective valorization of SCB. Furthermore, it showcases the R&D and commercial strides that have been achieved in South Africa. Finally, the study covers techno-economic studies that corroborate the economic viability of this domain. In conclusion, harnessing SCB not only presents a viable biorefinery pathway towards sustainable economic growth but also contributes to environmental preservation and social well-being, aligning with global sustainability imperatives. The successful integration of these innovative approaches could play a pivotal role in transforming the South African sugarcane industry into a continental leader in circular bioeconomy innovations. Full article

Carboxymethyl cellulose (CMC) films, derived from sugarcane bagasse agricultural waste (SCB) incorporated with Betalains-nitrogen-doped carbon dots (Betalains-N–CQDs), derived from beet root waste (BR), offer a sustainable, smart and naked-eye sensor for strawberry packaging due to their excellent fluorescent and shape memory properties. These CMC-Betalains-N–CQDs aim to enhance strawberry preservation and safety by enabling visual detection of common food contaminants such as bacteria, fungi and Pb(II). Crucially, the CMC-Betalains-N–CQD film also exhibits excellent shape memory properties, capable of fixing various shapes under alkaline conditions and recovering its original form in acidic environments, thereby offering enhanced physical protection for delicate produce like strawberries. Optical studies reveal the Betalains-N–CQDs’ pH-responsive fluorescence, with distinct emission patterns observed across various pH levels, highlighting their potential for sensing applications. Scanning Electron Microscopy (SEM) confirms the successful incorporation of Betalains-N–CQDs into the CMC matrix, revealing larger pores in the composite film that facilitate better interaction with analytes such as bacteria. Crucially, the CMC-Betalains-N–CQD film demonstrates significant antibacterial activity against common foodborne pathogens like Escherichia coli, Staphylococcus aureus, and Candida albicans, as evidenced by inhibition zones and supported by molecular docking simulations showing strong binding interactions with bacterial proteins. Furthermore, the film functions as a fluorescent sensor, exhibiting distinct color changes upon contact with different microorganisms and Pb(II) heavy metals, enabling rapid, naked-eye detection. The film also acts as a pH sensor, displaying color shifts (brown in alkaline, yellow in acidic) due to the betalains, useful for monitoring food spoilage. This research presents a promising, sustainable, and multifunctional intelligent packaging solution for enhanced food safety and extended shelf life. Full article

This study evaluated the effect of biochars on growth performance, nutrient digestibility, carcass yield, bone mineralization, litter quality and footpad lesions in broilers. Eight hundred day-old chicks were randomly divided into four treatments, 10 replicates per treatment (20 birds/replicate) for 35 days. Treatments were basal diet (control), a control diet with corncob (CC) biochar (1%), a control diet with wheat straw (WS) biochar (1%) and a control diet with sugarcane bagasse (SCB) biochar (1%). Body weight gain (BWG), feed intake (FI) and feed conversion ratio (FCR) were recorded weekly. Nutrient digestibility, bone mineralization and carcass parameters were determined on the 21st and 35th days, while footpad lesions and litter quality were also assessed. The results revealed significant improvement (p < 0.05) in FI, BWG and FCR with supplementation. Nutrient digestibility was higher (p < 0.05) in the SCB biochar group. Tibia calcium and phosphorus levels were enhanced (p < 0.05) in the WS and SCB biochar groups, respectively. Footpad lesions were significantly lower (p < 0.05) in the CC biochar group, while litter quality was improved (p < 0.05) in the WS biochar group. Lymphoid organ relative weight results revealed that spleen weight was not affected by biochar supplementation in diet (p > 0.05), while dietary supplementation of CS and WS biochar in the diet resulted in the highest relative weights of thymus and bursa (p < 0.05). However, dietary supplementation of WS, SC and SCB biochar supplementation had affected positively the log value of the ND virus and IBV titers in birds. Overall, dietary supplementation of 1% biochars enhances growth performance, bone mineralization, footpad health immunity and litter quality in broilers. Full article

In this study, sugarcane bagasse (SCB), an abundant agricultural byproduct, was transformed into activated carbon via a controlled thermochemical pyrolysis route for high-performance energy storage applications. Herein, we utilized the activated carbon derived from pure sugarcane bagasse (SCB-AC) and further activated using KOH (SCB-KOH-AC) as an electrode material in aqueous symmetric supercapacitor configurations. The synthesized activated carbon was subjected to analysis using a range of characteristics including FT-Raman spectroscopy, which was employed to confirm the functional groups present in the carbon materials. The XPS analysis provided insights into the elemental composition and ionic states. The SEM analysis revealed that both activated carbon and KOH/activated carbon materials exhibited a layered or stacked, albeit slightly random, orientation. Electrochemical studies demonstrated that the synthesized carbon electrodes exhibited impressive specific capacitance values of (SCB) activated carbon (132.20 F/g) and KOH-activated, pure SCB AC (SCB-A) 253.41 F/g at 0.5 A/g. Furthermore, the SCB KOH-activated carbon (AC) electrode revealed a higher specific capacitance value and A//SCB-A symmetric devices delivered energy density reaching 17.91 Wh/kg and power density up to 2990 W/kg. The KOH-activated carbon electrode demonstrated remarkable cycling stability retaining 93.89%, even after 10,000 cycles. These results suggest that the sugarcane bagasse-derived activated carbon is a sustainable and low-cost candidate for next-generation supercapacitor electrodes. The results demonstrate enhanced capacitance, stability, and pore structure tailored for energy storage applications. The KOH-activated carbon SCB carbon symmetric device with symmetric electrodes exhibited a suitable bio-mass carbon for future energy storage applications. Full article

Sugarcane bagasse (SCB), an organic waste generated during sugar and ethanol production, is a potential biomass source with a high cellulose content. In this study, cellulose was extracted from SCB using a hydrothermal method with various types of solvents, following which the extracted materials were used for food container production. An alkali solvent—sodium hydroxide (NaOH)—and organic acids—citric acid and formic acid—were included as extractive solvents at two different concentrations (0.25 M and 2.0 M). Hydrothermal extraction with the alkali solvent demonstrated higher cellulose extraction abilities (67.7–74.0%) than those with the acids (52.5–57.3%). Using a low alkali concentration in the hydrothermal extraction (H-NaOH_low) demonstrated a cellulose extraction ability near that when using a high alkali concentration in the conventional boiling method (B-NaOH_high): 67.7% and 70.5%, respectively. Moreover, cellulose extracted with H-NaOH_low had better mechanical properties than that from B-NaOH_high, likely due to fewer defective fibers in the former. A high alkali concentration led to vigorous reactions that damaged the cellulose fibers. Thus, hydrothermal extraction has the benefit of using fewer chemicals, leading to a lower environmental impact. In addition, H-NaOH_low fibers were employed for food container production, and it was found that the obtained product has excellent properties, comparable to those of commercial containers. Full article