Search Results (120)

We revisit the Extended Uncertainty Principle (EUP) from an operational viewpoint, replacing wavefunction-based widths with apparatus-defined position constraints such as a finite slit of width $\mathrm{\Delta }x$ or a geodesic ball of radius R. Using Hermitian momentum operators consistent with the EUP algebra, we prove a sharp lower bound on the product of momentum spread and preparation size in one dimension and show that it reduces smoothly to the standard quantum limit as the deformation vanishes. We then extend the construction to dimensions two and three on spaces of constant curvature and obtain the corresponding bound for spherical confinement, clarifying its geometric meaning via an isometry to $S^2$ and $S^3$. The framework links curvature-scale effects to operational momentum floors and suggests concrete tests in diffraction, cold-atom, and optomechanical settings. Full article

The constitutive modelling of granular soils has been a long-standing research subject in geotechnical engineering, and machine learning (ML) has recently emerged as a promising tool for achieving this goal. This paper proposes two recurrent neural networks, namely, the Gated Recurrent Unit Neural Network (GRU-NN) and the Long Short-Term Memory Neural Network (LSTM-NN), which utilize input parameters such as the initial void ratio, initial fabric anisotropy, uniformity coefficient, mean particle size, and confining pressure to establish the high-dimensional relationships of granular soils from micro to macro levels subjected to triaxial shearing. The research methodology consists of several steps. Firstly, 200 numerical triaxial tests on idealized granular soils comprising polydisperse spherical particles are performed using the discrete element method (DEM) simulation to generate datasets and to train and test the proposed neural networks. Secondly, LSTM-NN and GRU-NN are constructed and trained, and their prediction performance is evaluated by the mean absolute percentage error (MAPE) and R-square against the DEM-based datasets. The extremely low error values obtained by both LSTM-NN and GRU-NN indicate their outstanding capability in predicting the constitutive behaviour of idealized granular soils. Finally, the trained ML-based models are applied to predict the constitutive behaviour of a miniature glass bead sample subjected to triaxial shearing with in situ micro-CT, as well as to two extrapolated test sets with different initial parameters. The results show that both methods perform well in capturing the mechanical responses of the idealized granular soils. Full article

Tokamak technology, as the cornerstone of nuclear fusion energy, holds immense potential in achieving efficient plasma confinement and high energy densities. To comprehensively map the rapidly evolving landscape of this field, this study employs bibliometric analysis to systematically examine the research and development trends of tokamak technology from 2014 to 2024. The data are drawn from 7702 academic publications in the Scopus database, representing a global research effort. Additionally, the study incorporates 2299 tokamak-related patents from Google Patents over the same period, analyzing their technological trends to highlight the growing significance of tokamak devices. Using the R language and the Bibliometric package, the analysis explores research hotspots, institutional influences, and keyword evolution. The results reveal a multifaceted global landscape: China leads in publication output, and the United States maintains a leading role in citation impacts and technological innovation, with other notable contributions from Germany, Japan, South Korea, and various European countries. Patent trend analysis further reveals the rapid expansion of tokamak applications, particularly with significant innovations in high-temperature superconducting magnets and plasma control technologies. Nevertheless, the study identifies major challenges in the commercialization process, including plasma stability control, material durability, and the sustainability of long-term operations. To address these, the study proposes concrete future directions, emphasizing international collaboration and interdisciplinary integration. These efforts are crucial in accelerating tokamak commercialization, thereby providing a strategic roadmap for researchers, policymakers, and industry stakeholders to advance the global deployment of clean energy solutions. Full article

This is a numerical investigation of optical and electronic characteristics of GaAs spherical quantum dots based on single and double quartic potentials and presenting a hydrogenic impurity at their center. The radial Schrödinger equation was solved using the finite difference method (FDM) to obtain the energy levels and the wavefunctions. These physical quantities were then used to compute the dipole matrix elements, the total optical absorption coefficient (TOAC), and the binding energies. The impact of the structural parameters in the confining potentials on the red and blue shifts of the TOAC is discussed in the presence and absence of hydrogenic impurity. Our results indicate that the structural parameter $k$ in both potentials plays a crucial role in tuning the TOAC. In the case of single quartic potential, increasing $k$ produces a blue shift; however, its augmentation in the case of double quartic potential displays a blue shift at first, and then a red shift. Furthermore, the augmentation of the parameter $k$ can control the binding energies of the two lowest states, ($1s$) and ($1p$). In fact, enlarging this parameter reduces the binding energies and converges them to constant values. In general, the modification of the potential’s parameters, which can engender two shapes of confining potentials (single quartic and double quartic), enables the experimenters to control the desired energy levels and consequently to adjust and select the suitable TOAC between the two lowest energy states (ground ($1s$) and first excited ($1p$)). Full article

Calcareous sands are widely distributed across the South China Sea’s continental shelf and coastlines. Understanding their mechanical behavior and microstructural evolution under cementation is critical for coastal engineering applications. While previous studies have investigated cemented calcareous sands, the comparative analyses of particle breakage and microstructural characteristics between cemented and pure sands remain limited. This study combines triaxial compression tests with X-ray CT scanning and Digital Volume Correlation analysis to systematically examine both material types. Pre- and post-loading CT scans enabled the detailed tracking of microstructural transformations. Results demonstrate that cemented specimens exhibit higher strength–stiffness properties with strain-softening behavior compared to pure sand under 200 kPa confining pressures. A quantitative analysis revealed greater particle breakage in cemented sand, while pure sand showed more pronounced increases in particle sphericity and the aspect ratio during deformation, accompanied by reduced porosity variation along specimen height (coefficient of variation decreased from 15.2% to 12.8% for pure sand. Microstructural analysis indicated moderate increases in pore sphericity and reduced anisotropy in both materials. Fractal dimension analysis demonstrated more significant structural reorganization in cemented sands. Both materials exhibited increases in key morphological parameters, including the throat equivalent radius, channel length, pore equivalent radius, and coordination number, with changes being more substantial in cemented sands. Within shear band regions, cemented sands displayed marked reductions in pore and throat quantities. These findings elucidate fundamental relationships between cementation effects and micro–macro mechanical responses, providing theoretical support for geotechnical applications involving calcareous sands. Full article

This study examines the diffusion of spherical particles in a conical widening channel, with a focus on the effects of deterministic drift and entropic forces. Through numerical simulations, we analyze the motion of particles from a reflecting boundary to an absorbing one. Properties of diffusive motion are explored by inspection of mean squared displacement and mean first passage time. The results show that the diffusion type depends on the drift strength. Without the drift, entropic forces induce effective superdiffusion; however, the increasing drift strength can counterbalance entropic forces and shift the system to standard diffusion and then effective subdiffusion. The mean squared displacement exhibits bending points for high drift values, as predicted by one-dimensional theoretical considerations. The study underscores the importance of considering deterministic and entropic forces in confined geometries. Full article

We use the Shannon informational entropies as a tool to study the artificial helium atom, namely, two electrons confined in a quantum dot. We adopt configurations with spherical and cylindrical symmetries for the physical system of interest. Using the informational quantities, we analyze the effects of electronic confinement, we validate the entropic uncertainty relation, we identify that the Coulomb interaction potential between the electrons is no longer important for strong confinements, and we indicate/predict the avoided crossing phenomena. Finally, we carried out a density function analysis. When available, the results are compared with those in the literature. Full article

The paper presents a conceptual study of a neutron source based on a spherical tokamak (ST). The plasma scenario chosen for the ST is non-thermal fusion (hot ion mode), which is extensively used on machines like JET and TFTR deuterium–tritium (DT) experiments, which seems suited for low fusion gain reactors. As demonstrated in experiments, this scenario is a robust tool for neutron production. Starting from a new scaling law of energy confinement tested, approximately, on ST40 spherical tokamak, the parameters of a 15 MW ST DT fusion reactor (ST180) are derived, and a preliminary radial build of the machine is established. Full article

In this study, a thin film of silicon carbide (SiC) was deposited on a porous silicon (P-Si) substrate using pulsed laser deposition (PLD). The photo–electrochemical etching method with an Nd: YAG laser at 1064 nm wavelength and 900 mJ pulse energy and at a vacuum of 10⁻² mbar P-Si was utilized to create a sufficiently high amount of surface area for SiC film deposition to achieve efficient SiC film growth on the P-Si substrate. X-ray diffraction (XRD) analysis was performed on the crystalline structure of SiC and showed high-intensity peaks at the (111) and (220) planes, indicating that the substrate–film interaction is substantial. Surface roughness particle topography was examined via atomic force microscopy (AFM), and a mean diameter equal to 72.83 nm was found. Field emission scanning electron microscopy (FESEM) was used to analyze surface morphology, and the pictures show spherical nanoparticles and a mud-sponge-like shape demonstrating significant nanoscale features. Photoluminescence and UV-Vis spectroscopy were utilized to investigate the optical properties, and two emission peaks were observed for the SiC and P-Si substrates, at 590 nm and 780 nm. The SiC/P-Si heterojunction photodetector exhibited rectification behavior in its dark I–V characteristics, indicating high junction quality. The spectral responsivity of the SiC/P-Si observed a peak responsivity of 0.0096 A/W at 365 nm with detectivity of 24.5 A/W Jones, and external quantum efficiency reached 340%. The response time indicates a rise time of 0.48 s and a fall time of 0.26 s. Repeatability was assured by the tight clustering of the data points, indicating the good reproducibility and stability of the SiC/P-Si deposition process. Linearity at low light levels verifies efficient photocarrier generation and separation, whereas a reverse saturation current at high intensities points to the maximum carrier generation capability of the device. Moreover, Raman spectroscopy and energy dispersive spectroscopy (EDS) analysis confirmed the structural quality and elemental composition of the SiC/P-Si film, further attesting to the uniformity and quality of the material produced. This hybrid material’s improved optoelectronic properties, achieved by combining the stability of SiC with the quantum confinement effects of P-Si, make it useful in advanced optoelectronic applications such as UV-Vis photodetectors. Full article

Mn₃O₄ nanoparticles have been synthesized using alcoholic extracts, at pH = 7 and low temperature (60 °C), from different masses (1.00, 3.00, 5.00, and 7.00 g) of fresh leaves from Nerium oleander and Bixa orellana, without additional heat treatment. Appropriate techniques were used to identify the secondary metabolites of the extracts and evaluate the structural, optical, and chemical properties of the nanoparticles. The XRD results confirmed the formation of Mn₃O₄ nanoparticles with crystallite size in the 5−8 nm range, with more notable effects on the crystallinity of the nanoparticles obtained with B. orellana extracts. The greatest effect on the bandgap was observed in nanoparticles synthesized with N. oleander extracts. Raman spectra confirmed phonon confinement, and in the PL spectra, emission bands associated with structural defects, such as oxygen vacancies, were observed. In FTIR spectra, the main bands of Mn₃O₄ were identified, whose intensity decreased as the concentration of extract and other bands associated with functional groups of the extract increased. TEM images showed nanoparticles were spherical with 7.81 nm (N1) and 7.94 nm (B1) average diameters. The extract from N. oleander leaves was more appropriate than that from B. orellana for the synthesis of Mn₃O₄ nanoparticles under the conditions used. Full article

A class of hybrid molecularly imprinted polymeric nanoparticles (nanoMIPs) comprising the in situ formation of gold nanoparticles (AuNPs) immobilised in a molecularly imprinted D-gluconate polymer has been designed with the objective of attempting the electrochemical quantification of gluconic acid (GA) in a wine setting. The imprinted polymers were synthesised in the presence of AuNP precursors in a pre-polymerisation mixture, which were confined to one another during the polymerisation of the chains. This allowed the formation of hybrid electroactive responsive imprinted nanoparticles (hybrid AuNPs@GA-nanoMIP), which exhibited enhanced electron conductivity. The morphological characterisation of the produced nanoMIPs revealed a fully decorated Au spherical surface of 200 nm in diameter. This resulted in a large active surface area distribution, as well a pronounced electrochemical peak response at the commercial screen-printed platinum electrode (SPPtE), accompanied by enhanced electron kinetics. The AuNPs@GA-nanoMIP sensor demonstrated the ability to detect a broad range of GA concentrations (0.025–5 mg/mL) with exceptional selectivity and reproducibility. The calibration curves were fitted with different isotherm models, such as the Langmuir, Freundlich and Langmuir–Freundlich functions. Moreover, the efficacy of the detection method was demonstrated by the recovery rates observed in real samples of Italian red wine. This research contributes to the development of a robust and reliable electrochemical sensor for the on-site determination of gluconic acid in food analysis. Full article

In recent years, a kind of novel cellular concrete, fabricated by spherical saturated superabsorbent polymers, was developed. Its compressive behavior under high strain rate loadings has been studied by split Hopkinson pressure bar equipment in previous research, which revealed an obvious strain rate effect. It has been found by many researchers that the dynamic increase factor (DIF) of compressive strength for concrete-like materials measured by SHPB includes considerable structural effects, which cannot be considered as a genuine strain rate effect. Based on the extended Drucker–Prager model in Abaqus, this paper uses numerical SHPB tests to investigate structural effects in dynamic compression for this novel cellular concrete. It is found that the increment in compressive strength caused by lateral inertia confinement decreases from 5.9 MPa for a specimen with a porosity of 10% to 2 MPa for a specimen with a porosity of 40% at a strain rate level of 70/s, while the same decreasing trend was found at other strain rate levels of 100/s and 140/s. The lateral inertia confinement effect inside the cellular concrete specimen can be divided into the elastic development stage and plastic development stage, bounded by the moment dynamic stress equilibrium is achieved. The results obtained in this research can help to obtain a better understanding of the enhancement mechanism of the compressive strength of cellular concrete. Full article

In exploring adjuvant therapies for head and neck cancer, hyperthermia (40–45 °C) has shown efficacy in enhancing chemotherapy and radiation, as well as the delivery of liposomal drugs. Current hyperthermia treatments, however, struggle to reach large deep tumors uniformly and non-invasively. This study investigates the feasibility of delivering targeted uniform hyperthermia deep into the tissue using a non-invasive ultrasound spherical random phased array transducer. Simulations in 3D patient-specific models for thyroid and oropharyngeal cancers assessed the transducer’s proficiency. The transducer consisting of 256 elements randomly positioned on a spherical shell, operated at a frequency of 1 MHz with various phasing schemes and power modulations to analyze 40, 41, and 43 °C isothermal volumes and the penetration depth of the heating volume, along with temperature uniformity within the target area using T10, T50, and T90 temperatures, across different tumor models. Intensity distributions and volumetric temperature contours were calculated to define moderate hyperthermia boundaries. The results indicated the array’s ability to produce controlled heating volumes from 1 to 48 cm³ at 40 °C, 0.35 to 27 cm³ at 41 °C, and 0.1 to 8 cm³ at 43 °C. The heating depths ranged from 7 to 39 mm minimum and 52 to 59 mm maximum, measured from the skin’s inner surface. The transducer, with optimal phasing and water-cooled bolus, confined the heating to the targeted regions effectively. Multifocal sonications also improved the heating homogeneity, reducing the length-to-diameter ratio by 38% when using eight foci versus a single one. This approach shows potential for treating a range of tumors, notably deep-seated and challenging oropharyngeal cancers. Full article

This study compares the photogrammetric performance of three multi-camera systems—two spherical cameras (INSTA 360 Pro2 and MG1) and one multi-camera rig (ANT3D)—to evaluate their accuracy and precision in confined environments. These systems are particularly suited for indoor surveys, such as narrow spaces, where traditional methods face limitations. The instruments were tested for the survey of a narrow spiral staircase within Milan Cathedral and the results were analyzed based on different processing strategies, including different relative constraints between sensors, various calibration sets for distortion parameters, interior orientation (IO), and relative orientation (RO), as well as two different ground control solutions. This study also included a repeatability test. The findings showed that, with appropriate ground control, all systems achieved the target accuracy of 1 cm. In partially unconstrained scenarios, the drift errors ranged between 5 and 10 cm. Performance varied depending on the processing pipelines; however, the results suggest that imposing a multi-camera constraint between sensors and estimating both IO and RO parameters during the Bundle Block Adjustment yields the best outcomes. In less stable environments, it might be preferable to pre-calibrate and fix the IO parameters. Full article

In this article, we address resistance forces and torques acting onto a body with arbitrary shape moving in an unsteady Stokes flow. We start analyzing the functional form of the expressions for forces and torques, which depend on the frequency parameter and on the position of the body in the domain of the fluid, and determining the asymptotic limits for high and low frequencies. In this regard, we show that, for high frequencies (hence short times), forces and torques are obtained by the associated hydrodynamic problems considering ideal potential flows, independently of the geometry of the problem. Afterwards, with the aim of obtaining expressions for forces and torques valid in the entire range of frequencies, we extend to the unsteady case the reflection method, largely employed in the theory of the steady Stokes flows. In this way, general expressions are provided in terms of the Faxén operators of the body and the Green function associated with the geometry of the confinement, that are valid, to the leading order, at any frequency, independently of the geometry of the problem. Finally, as the application of the general expressions, explicit relations for the resistance forces acting onto a spherical body with no-slip boundary conditions near a plane wall with full-slip boundary conditions are obtained, valid over the entire frequency range, provided that the distance between the plane and the sphere is larger than one sphere radius. Full article