Search Results (14)

Background/Objectives: Pressure injuries are a significant concern among older adults, particularly in community-based long-term care settings where prolonged immobility is prevalent. This study aimed to identify factors influencing sacral interface pressure in community-dwelling older adults, with an emphasis on support surface usage and clinical risk indicators. Methods: A total of 210 participants aged 65 years and older, all receiving long-term care services in South Korea, were enrolled in this study. Sacral interface pressure was measured in the supine position using a portable pressure mapping device (Palm Q7). General characteristics, Braden Scale scores, Huhn Scale scores, and mattress usage were assessed. Data were analyzed using descriptive statistics, t-tests, chi-square tests, and logistic regression. Results: Mattress non-use was identified as the strongest predictor of elevated sacral interface pressure (OR = 6.71, p < 0.001), followed by Braden Scale scores indicating moderate risk (OR = 4.8, p = 0.006). Huhn Scale scores were not significantly associated with interface pressure. These results suggest that support surface quality and skin condition have a stronger impact on interface pressure than mobility-related risk factors. Conclusions: The findings highlight the importance of providing high-quality pressure-relieving mattresses and implementing standardized nursing assessments to reduce the risk of pressure injuries. Integrating smart technologies and expanding access to advanced support surfaces may aid in developing tailored preventive strategies for vulnerable older adults. Full article

Monitoring position and movements of preterm infants is important to ensure their well-being and optimal development. This study evaluates the feasibility of a pressure-sensitive fiber-optic mattress (FM), made entirely of plastic, for two-dimensional analysis of preterm infant movements and positioning. Before clinical use, we developed a simple, replicable, and cost-effective test protocol to simulate infant movements and positions, enabling early identification of technical limitations. Using data from 20 preterm infants, we assessed the FM’s potential to monitor posture and limb motion. FM-derived pressure patterns were compared with camera-based manual annotations to distinguish between different positions and out-of-bed moments, as well as limb-specific movements. Bench-test results demonstrated the FM’s sensitivity to motion and pressure changes, supporting its use in preclinical validation. Clinical data confirmed the FM’s reliability in identifying infant positions and movement patterns, showing an accuracy comparable to camera annotations. However, limitations such as calibration, sensitivity to ambient light, and edge-related artifacts were noted, indicating areas for improvement. In conclusion, the test protocol proved effective for early-stage evaluation of smart mattress technologies. The FM showed promising clinical feasibility for non-obtrusive monitoring of preterm infants, though further optimization is needed for robust performance in neonatal care. Full article

Sleep posture detection is a potentially important component of sleep quality assessment and health monitoring. Accurate identification of sleep postures can offer valuable insights into an individual’s sleep patterns, comfort levels, and potential health risks. For example, improper sleep postures may lead to musculoskeletal issues, respiratory disturbances, and even worsen conditions like sleep apnea. Additionally, for long-term bedridden patients, continuous monitoring of sleep postures is essential to prevent pressure ulcers and other complications. Traditional methods for sleep posture detection have several limitations: wearable sensors can disrupt natural sleep and cause discomfort, camera-based systems raise privacy concerns and are sensitive to environmental conditions, and pressure-sensing mats are often complex and costly. To address these issues, we have developed a low-cost non-contact sleeping posture detection system. Our system features eight optimally distributed triaxial accelerometers, providing a comfortable and non-contact front-end data acquisition unit. For sleep posture classification, we employ an improved density peak clustering algorithm that incorporates the K-nearest neighbor mechanism. Additionally, we have constructed a Parallel Convolutional Spatiotemporal Network (PCSN) by integrating Convolutional Neural Network (CNN), Long Short-Term Memory (LSTM), and Bidirectional Long Short-Term Memory (Bi-LSTM) modules. Experimental results demonstrate that the PCSN can accurately distinguish six sleep postures: prone, supine, left log, left fetus, right log, and right fetus. The average accuracy is 98.42%, outperforming most state-of-the-art deep learning models. The PCSN achieves the highest scores across all metrics: 98.64% precision, 98.18% recall, and 98.10% F1 score. The proposed system shows considerable promise in various applications, including sleep studies and the prevention of diseases like pressure ulcers and sleep apnea. Full article

The home is an ideal setting for long-term sleep monitoring. This review explores a range of home-based sleep monitoring technologies, including smartphone apps, smartwatches, and smart mattresses, to assess their accuracy, usability, limitations, and how well they integrate with existing healthcare systems. This review evaluates 21 smartphone apps, 16 smartwatches, and nine smart mattresses through systematic data collection from academic literature, manufacturer specifications, and independent studies. Devices were assessed based on sleep-tracking capabilities, physiological data collection, movement detection, environmental sensing, AI-driven analytics, and healthcare integration potential. Wearables provide the best balance of accuracy, affordability, and usability, making them the most suitable for general users and athletes. Smartphone apps are cost-effective but offer lower accuracy, making them more appropriate for casual sleep tracking rather than clinical applications. Smart mattresses, while providing passive and comfortable sleep tracking, are costlier and have limited clinical validation. This review offers essential insights for selecting the most appropriate home sleep monitoring technology. Future developments should focus on multi-sensor fusion, AI transparency, energy efficiency, and improved clinical validation to enhance reliability and healthcare applicability. As these technologies evolve, home sleep monitoring has the potential to bridge the gap between consumer-grade tracking and clinical diagnostics, making personalized sleep health insights more accessible and actionable. Full article

The transition from wakefulness to sleep occurs when the core body temperature decreases. The latter is facilitated by an increase in the cutaneous blood flow, which dissipates internal heat into the micro-environment surrounding the sleeper’s body. The rise in cutaneous blood flow near sleep onset causes the distal (hands and feet) and proximal (abdomen) temperatures to increase by about 1 °C and 0.5 °C, respectively. Characterizing the dynamics of skin temperature changes throughout sleep phases and understanding its relationship with sleep quality requires a means to unobtrusively and longitudinally estimate the skin temperature. Leveraging the data from a temperature sensor strip (TSS) with five individual temperature sensors embedded near the surface of a smart bed’s mattress, we have developed an algorithm to estimate the distal skin temperature with a minute-long temporal resolution. The data from 18 participants who recorded TSS and ground-truth temperature data from sleep during 14 nights at home and 2 nights in a lab were used to develop an algorithm that uses a two-stage regression model (gradient boosted tree followed by a random forest) to estimate the distal skin temperature. A five-fold cross-validation procedure was applied to train and validate the model such that the data from a participant could only be either in the training or validation set but not in both. The algorithm verification was performed with the in-lab data. The algorithm presented in this research can estimate the distal skin temperature at a minute-level resolution, with accuracy characterized by the mean limits of agreement [−0.79 to +0.79 °C] and mean coefficient of determination $R^2=0.87$. This method may enable the unobtrusive, longitudinal and ecologically valid collection of distal skin temperature values during sleep. Therelatively small sample size motivates the need for further validation efforts. Full article

Sleep quality is an important issue of public concern. This study, combined with sensor application, aims to explore the determinants of perceived comfort when using smart bedding to provide empirical evidence for improving sleep quality. This study was conducted in a standard sleep laboratory in Quanzhou, China, from March to April of 2023. Perceived comfort was evaluated using the Subjective Lying Comfort Evaluation on a seven-point rating scale, and body pressure distribution was measured using a pressure sensor. Correlation analysis was employed to analyze the relationship between perceived comfort and body pressure, and multiple linear regression was used to identify the factors of perceived comfort. The results showed that body pressure was partially correlated with perceived comfort, and sleep posture significantly influenced perceived comfort. In addition, height, weight, and body mass index are common factors that influence comfort. The findings highlight the importance of optimizing the angular range of boards based on their comfort performance to adjust sleeping posture and equalize pressure distribution. Future research should consider aspects related to the special needs of different populations (such as height and weight), as well as whether users are elderly and whether they have particular diseases. The design optimization of the bed board division and mattress softness, based on traditional smart bedding, can improve comfort and its effectiveness in reducing health risks and enhancing health status. Full article

In the manufacturing industry, there are claims about a novel system or paradigm to overcome current data interpretation challenges. Anecdotally, these studies have not been completely practical in real-world applications (e.g., data analytics). This article focuses on smart manufacturing (SM), proposed to address the inconsistencies within manufacturing that are often caused by reasons such as: (i) data realization using a general algorithm, (ii) no accurate methods to overcome the actual inconsistencies using anomaly detection modules, or (iii) real-time availability of insights of the data to change or adapt to the new challenges. A real-world case study on mattress protector manufacturing is used to prove the methods of data mining with the deployment of the isolation forest (IF)-based machine learning (ML) algorithm on a cloud scenario to address the inconsistencies stated above. The novel outcome of these studies was establishing efficient methods to enable efficient data analysis. Full article

Bed is often the personal care unit in hospitals, nursing homes, and individuals’ homes. Rich care-related information can be derived from the sensing data from bed. Patient fall is a significant issue in hospitals, many of which are related to getting in and/or out of bed. To prevent bed falls, a motion-sensing mattress was developed for bed-exit detection. A machine learning algorithm deployed on the chip in the control box of the mattress identified the in-bed postures based on the on/off pressure pattern of 30 sensing areas to capture the users’ bed-exit intention. This study aimed to explore how sleep-related data derived from the on/off status of 30 sensing areas of this motion-sensing mattress can be used for multiple layers of precision care information, including wellbeing status on the dashboard and big data analysis for living pattern clustering. This study describes how multiple layers of personalized care-related information are further derived from the motion-sensing mattress, including real-time in-bed/off-bed status, daily records, sleep quality, prolonged pressure areas, and long-term living patterns. Twenty-four mattresses and the smart mattress care system (SMCS) were installed in a dementia nursing home in Taiwan for a field trial. Residents’ on-bed/off-bed data were collected for 12 weeks from August to October 2021. The SMCS was developed to display care-related information via an integrated dashboard as well as sending reminders to caregivers when detecting events such as bed exits and changes in patients’ sleep and living patterns. The ultimate goal is to support caregivers with precision care, reduce their care burden, and increase the quality of care. At the end of the field trial, we interviewed four caregivers for their subjective opinions about whether and how the SMCS helped their work. The caregivers’ main responses included that the SMCS helped caregivers notice the abnormal situation for people with dementia, communicate with family members of the residents, confirm medication adjustments, and whether the standard care procedure was appropriately conducted. Future studies are suggested to focus on integrated care strategy recommendations based on users’ personalized sleep-related data. Full article

Pressure ulcers (PUs) are a serious global health challenge, affecting a large section of the population and putting immense pressure on healthcare systems. Sensor-based diagnostic tools and monitoring systems have emerged as a potential non-invasive solution to reduce the occurrence of new cases of PUs and promise a significant reduction in treatment expenditure and time. In this endeavour, the present manuscript reviews the advancements made in the last decade in the development and commercial adoption of different sensor systems for PU-associated chronic wound management. Different types of smart sensor systems have been developed in which pressure, chemical, and optical sensors have witnessed a lot of interest and significant advancement among research communities and industries alike. These sensors utilize a host of nanomaterial-based sensing materials, flexible support, diverse transducing modes, and different device designs to achieve high sensitivity and selectivity for skin pressure, temperature, humidity, and biomarkers released from the wound. Some of these sensor’s array-based electronic skin (e-skin) has reached the stage of commercialization and is being used in commercial products, such as smart bandages, shoes, watches, and mattress among others. Nonetheless, further innovations are necessary in the direction of associating multiple types of sensor arrays, particularly pressure and chemical sensor-based e-skins in a microsystem for performing real-time assessment of all the critical wound parameters. Full article

According to current trends in healthcare sensing technologies, we describe a textile-based pressure sensing matrix that can be integrated in the mattress of a smart bed to characterize sleeping posture/movement of a subject and to extract breathing activity. The pressure mapping layer is developed as a matrix of 195 piezoresistive sensors, it is entirely made of textile materials, and it is the basic component of a smart bed that can perform sleep analysis, can extract physiological parameters, and can detect environmental data related to subject’s health. In this paper, we show the principle of the pressure mapping layer and the architecture of the dedicated electronic system that we developed for signal acquisition. In addition, we describe the algorithms for posture/movement classification (dedicated artificial neural network) and for extraction of the breathing rate (frequency domain analysis). We also perform validation of the system to quantify the accuracy/precision of the posture classification and the statistical analysis to compare our breathing rate estimation with the gold standard. Full article

Sleep pattern and posture recognition have become of great interest for a diverse range of clinical applications. Autonomous and constant monitoring of sleep postures provides useful information for reducing the health risk. Prevailing systems are designed based on electrocardiograms, cameras, and pressure sensors, which are not only expensive but also intrusive in nature, and uncomfortable to use. We propose an unobtrusive and affordable smart system based on an electronic mat called Sleep Mat-e for monitoring the sleep activity and sleep posture of individuals living in residential care facilities. The system uses a pressure sensing mat constructed using piezo-resistive material to be placed on a mattress. The sensors detect the distribution of the body pressure on the mat during sleep and we use convolution neural network (CNN) to analyze collected data and recognize different sleeping postures. The system is capable of recognizing the four major postures—face-up, face-down, right lateral, and left lateral. A real-time feedback mechanism is also provided through an accompanying smartphone application for keeping a diary of the posture and send alert to the user in case there is a danger of falling from bed. It also produces synopses of postures and activities over a given duration of time. Finally, we conducted experiments to evaluate the accuracy of the prototype, and the proposed system achieved a classification accuracy of around 90%. Full article

Heart rate monitoring is the predominant quantitative health indicator of a newborn in the delivery room. A rapid and accurate heart rate measurement is vital during the first minutes after birth. Clinical recommendations suggest that electrocardiogram (ECG) monitoring should be widely adopted in the neonatal intensive care unit to reduce infant mortality and improve long term health outcomes in births that require intervention. Novel non-contact electrocardiogram sensors can reduce the time from birth to heart rate reading as well as providing unobtrusive and continuous monitoring during intervention. In this work we report the design and development of a solution to provide high resolution, real time electrocardiogram data to the clinicians within the delivery room using non-contact electric potential sensors embedded in a neonatal intensive care unit mattress. A real-time high-resolution electrocardiogram acquisition solution based on a low power embedded system was developed and textile embedded electrodes were fabricated and characterised. Proof of concept tests were carried out on simulated and human cardiac signals, producing electrocardiograms suitable for the calculation of heart rate having an accuracy within ±1 beat per minute using a test ECG signal, ECG recordings from a human volunteer with a correlation coefficient of ~ 87% proved accurate beat to beat morphology reproduction of the waveform without morphological alterations and a time from application to heart rate display below 6 s. This provides evidence that flexible non-contact textile-based electrodes can be embedded in wearable devices for assisting births through heart rate monitoring and serves as a proof of concept for a complete neonate electrocardiogram monitoring system. Full article

Continuous heart monitoring is essential for early detection and diagnosis of cardiovascular diseases, which are key factors for the evaluation of health status in the general population. Therefore, in the future, it will be increasingly important to develop unobtrusive and transparent cardiac monitoring technologies for the population. The possible approaches are the development of wearable technologies or the integration of sensors in daily-life objects. We developed a smart bed for monitoring cardiorespiratory functions during the night or in the case of continuous monitoring of bedridden patients. The mattress includes three accelerometers for the estimation of the ballistocardiogram (BCG). BCG signal is generated due to the vibrational activity of the body in response to the cardiac ejection of blood. BCG is a promising technique but is usually replaced by electrocardiogram due to the difficulty involved in detecting and processing the BCG signals. In this work, we describe a new algorithm for heart parameter extraction from the BCG signal, based on a moving auto-correlation sliding-window. We tested our method on a group of volunteers with the simultaneous co-registration of electrocardiogram (ECG) using a single-lead configuration. Comparisons with ECG reference signals indicated that the algorithm performed satisfactorily. The results presented demonstrate that valuable cardiac information can be obtained from the BCG signal extracted by low cost sensors integrated in the mattress. Thus, a continuous unobtrusive heart-monitoring through a smart bed is now feasible. Full article

Sleep quality has been directly linked to cognitive function, quality of life, and a variety of serious diseases across many clinical domains. Standard methods for assessing sleep involve overnight studies in hospital settings, which are uncomfortable, expensive, not representative of real sleep, and difficult to conduct on a large scale. Recently, numerous commercial digital devices have been developed that record physiological data, such as movement, heart rate, and respiratory rate, which can act as a proxy for sleep quality in lieu of standard electroencephalogram recording equipment. The sleep-related output metrics from these devices include sleep staging and total sleep duration and are derived via proprietary algorithms that utilize a variety of these physiological recordings. Each device company makes different claims of accuracy and measures different features of sleep quality, and it is still unknown how well these devices correlate with one another and perform in a research setting. In this pilot study of 21 participants, we investigated whether sleep metric outputs from self-reported sleep metrics (SRSMs) and four sensors, specifically Fitbit Surge (a smart watch), Withings Aura (a sensor pad that is placed under a mattress), Hexoskin (a smart shirt), and Oura Ring (a smart ring), were related to known cognitive and psychological metrics, including the n-back test and Pittsburgh Sleep Quality Index (PSQI). We analyzed correlation between multiple device-related sleep metrics. Furthermore, we investigated relationships between these sleep metrics and cognitive scores across different timepoints and SRSM through univariate linear regressions. We found that correlations for sleep metrics between the devices across the sleep cycle were almost uniformly low, but still significant (p < 0.05). For cognitive scores, we found the Withings latency was statistically significant for afternoon and evening timepoints at p = 0.016 and p = 0.013. We did not find any significant associations between SRSMs and PSQI or cognitive scores. Additionally, Oura Ring’s total sleep duration and efficiency in relation to the PSQI measure was statistically significant at p = 0.004 and p = 0.033, respectively. These findings can hopefully be used to guide future sensor-based sleep research. Full article