Search Results (19)

We study a parsimonious constrained two-component Gaussian mixture with symmetric locations $\pm \lambda$ and unequal weights controlled by $\alpha \in [-1,1]$; we refer to this family as the asymmetric bimodal normal. The constraint eliminates label switching and yields an identifiable parametrization for $\lambda >0$, while noting the boundary degeneracy at $\lambda =0$ where $\alpha$ is not identifiable. We derive closed-form analytical expressions for the density and distribution functions, an equivalent constructive representation (useful for simulation and interpretation), explicit moment formulas, and conditions distinguishing unimodality from bimodality. For inference, we develop maximum likelihood estimation with observed information standard errors and provide numerically stable fits via a block-coordinate quasi-Newton routine using method of moments initial values. A Monte Carlo simulation study across representative parameter settings evaluates bias and root mean squared error, and examines the behavior of Hessian-based standard error estimates, highlighting regimes where the observed information becomes ill-conditioned under weak separation. Empirical analyses, chemical calibration deviations from the National Institute of Standards and Technology and a regression example with asymmetric errors, show competitive or superior fit and interpretability relative to skewed normal alternatives, asymmetric Laplace models, and unconstrained Gaussian mixtures, with consistent advantages under model comparison using the Akaike information criterion and the Bayesian information criterion. Full article

The reliability of Internet of Things systems is critical for industrial applications; however, operational reliability data are often heterogeneous and strongly right-skewed, exhibiting non-Gaussian behaviour, overdispersion, and production-level variability that challenge classical predictive maintenance models. Existing approaches frequently rely on pooled assumptions or simplified error structures, limiting their ability to identify latent batch-level degradation and to jointly interpret discrete failure events and continuous lifetime information. To address these limitations, this study proposes a hierarchical Bayesian framework based on Integrated Nested Laplace Approximation (INLA) to jointly model discrete reset counts and continuous failure times. Three Latent Gaussian Models are evaluated—ranging from pooled baseline specifications to a fully joint model with shared latent batch effects—using a synthetic dataset designed to mimic realistic industrial fault patterns. The analysis demonstrates that standard pooled models fail to capture the degradation dynamics of defective device batches. In contrast, the hierarchical joint model successfully recovers latent quality variations, accurately links high reset intensity with shortened lifetimes, and substantially improves model fit, achieving a DIC reduction of over 67% compared to baseline approaches. INLA provides a computationally efficient and rigorously calibrated alternative to MCMC-based methods for modelling skewed and heterogeneous reliability data. The proposed framework enables reliable identification of defective production batches and robust uncertainty quantification, offering a practical tool for data-driven predictive maintenance in Industry 4.0. Future work will focus on validating the proposed framework using real industrial IoT datasets. Full article

In this paper, we propose a generalized odd log-logistic standard Laplace model and study some of its main properties. The novelty of this model is based on classical and risk-based measures to effectively analyze the body mass index (BMI) data. The analysis underscores the importance of a multidisciplinary approach in addressing challenges related to health, performance, and risk management. The proposed methodology not only is helpful to understand the variability of BMI measurements, but also prove how common statistical models considered in financial field can be effectively adapted to other ones, offering insights that drive informed decision-making and strategic planning. Full article

Consider the dynamical system x ˙ = f ( x ) , where x ∈ R n is the state vector, x ˙ is the time or spatial derivative, and f is the system model. We wish to identify unknown f from its time-series or spatial data. For this, we propose a Bayesian framework based on the maximum a posteriori (MAP) point estimate, to give a generalized Tikhonov regularization method with the residual and regularization terms identified, respectively, with the negative logarithms of the likelihood and prior distributions. As well as estimates of the model coefficients, the Bayesian interpretation provides access to the full Bayesian apparatus, including the ranking of models, the quantification of model uncertainties, and the estimation of unknown (nuisance) hyperparameters. For multivariate Gaussian likelihood and prior distributions, the Bayesian formulation gives a Gaussian posterior distribution, in which the numerator contains a Mahalanobis distance or “Gaussian norm”. In this study, two Bayesian algorithms for the estimation of hyperparameters—the joint maximum a posteriori (JMAP) and variational Bayesian approximation (VBA)—are compared to the popular SINDy, LASSO, and ridge regression algorithms for the analysis of several dynamical systems with additive noise. We consider two dynamical systems, the Lorenz convection system and the Shil’nikov cubic system, with four choices of noise model: symmetric Gaussian or Laplace noise and skewed Rayleigh or Erlang noise, with different magnitudes. The posterior Gaussian norm is found to provide a robust metric for quantitative model selection—with quantification of the model uncertainties—across all dynamical systems and noise models examined. Full article

This study derives explicit expressions for the Tail Conditional Expectation (TCE) and Tail Variance (TV) within the framework of the extended generalized skew-elliptical (EGSE) distribution. The EGSE family generalizes the class of elliptical distributions by incorporating a selection method, thereby allowing simultaneous and flexible control over location, scale, skewness, and tail heaviness in a unified parametric setting. As notable special cases, our results encompass the extended skew-normal, extended skew-Student-t, extended skew-logistic, and extended skew-Laplace distributions. The derived formulas extend existing results for generalized skew-elliptical distributions and reduce, to a considerable extent, the reliance on numerical integration, thus enhancing their tractability for actuarial and financial risk assessment. The practical utility of the proposed framework is further illustrated through an empirical analysis based on real stock market data, highlighting its effectiveness in quantifying and contrasting the heterogeneous tail risk profiles of financial assets. Full article

This study analyzes the volatility of Bitcoin using stochastic volatility models fitted to one-minute transaction data for the BTC/USDT pair between 1 April 2023, and 31 March 2024. Bernstein polynomial terms were introduced to accommodate intraday and intraweek seasonality, and flexible return distributions were used to capture distributional characteristics. Seven return distributions—normal, Student-t, skew-t, Laplace, asymmetric Laplace (AL), variance gamma, and skew variance gamma—were considered. We further incorporated explanatory variables derived from the trading volume and price changes to assess the effects of order flow. Our results reveal structural market changes, including a clear regime shift around October 2023, when the asymmetric Laplace distribution became the dominant model. Regression coefficients suggest a weakening of the volume–volatility relationship after September and the presence of non-persistent leverage effects. These findings highlight the need for flexible, distribution-aware modeling in 24/7 digital asset markets, with implications for market monitoring, volatility forecasting, and crypto risk management. Full article

In this paper, a size-biased Lindley (SBL) first-order autoregressive (AR(1)) process is proposed, the so-called SBL-AR(1). Some probabilistic and statistical properties of the proposed process are determined, including the distribution of its innovation process, the Laplace transformation function, multi-step-ahead conditional measures, autocorrelation, and spectral density function. In addition, the unknown parameters of the model are estimated via the conditional least squares and Gaussian estimation methods. The performance and behavior of the estimators are checked through some numerical results by a Monte Carlo simulation study. Additionally, two real-world datasets are utilized to examine the model’s applicability, and goodness-of-fit statistics are used to compare it to several pertinent non-Gaussian AR(1) models. The findings reveal that the proposed SBL-AR(1) model exhibits key theoretical properties, including a closed-form innovation distribution, multi-step conditional measures, and an exponentially decaying autocorrelation structure. Parameter estimation via conditional least squares and Gaussian methods demonstrates consistency and efficiency in simulations. Real-world applications to inflation expectations and water quality data reveal a superior fit over competing non-Gaussian AR(1) models, evidenced by lower values of the AIC and BIC statistics. Forecasting comparisons show that the classical conditional expectation method achieves accuracy comparable to some modern machine learning techniques, underscoring its practical utility for skewed and fat-tailed time series. Full article

The skew distribution has the characteristic of appropriately modeling asymmetric unimodal data. However, in practice, there are several cases in which the data present more than one mode. In the literature, it is possible to find a large number of authors who have studied extensions based on the skew distribution to model this type of data. In this article, a new family is introduced, consisting of a multimodal modification to the family of skew distributions. Using the methodology of the weighted version of a function, we perform the product of the density function of a family of skew distributions with a polynomial of degree 4, thus obtaining a more flexible model that allows modeling data sets, whose distribution contains at most three modes. The density function, some properties, moments, skewness coefficients, and kurtosis of this new family are presented. This study focuses on the particular cases of skew-normal and Laplace distributions, although it can be applied to any other distribution. A simulation study was carried out, to study the behavior of the model parameter estimates. Illustrations with real data, referring to medicine and environmental data, show the practical performance of the proposed model in the two particular cases presented. Full article

Investing in stocks and shares is a common strategy to pursue potential gains while considering future financial needs, such as retirement and children’s education. Effectively managing investment risk requires thoroughly analyzing stock market returns and making informed predictions. Traditional models often utilize normal variance distributions to describe these returns. However, stock market returns often deviate from normality, exhibiting skewness, higher kurtosis, heavier tails, and a more pronounced center. This paper investigates the Laplace distribution and its generalized forms, including asymmetric Laplace, skewed Laplace, and the Kumaraswamy Laplace distribution, for modeling stock market returns. Our analysis involves a comparative study with the widely-used Variance-Gamma distribution, assessing their fit with the weekly returns of the S&P 500 Index and its eleven business sectors, drawing parallel inferences from international stock market indices like IBOVESPA and KOSPI for emerging and developed economies, as well as the 20+ Years Treasury Bond ETFs and individual stocks across varied time horizons. The empirical findings indicate the superior performance of the Kumaraswamy Laplace distribution, which establishes it as a robust alternative for precise return predictions and efficient risk mitigation in investments. Full article

Some might say that the eigenproblem is one of the examples people discovered by looking at the sky and wondering. Even though it was formulated to explain the movement of the planets, today it has become the ansatz of solving many linear and nonlinear problems. Formulation in the terms of the eigenproblem is one of the key tools to solve complex problems, especially in the area of molecular geometry. However, the basic concept is difficult without proper preparation. A review paper covering basic concepts and algorithms is very useful. This review covers the basics of the topic. Definitions are provided for defective, Hermitian, Hessenberg, modal, singular, spectral, symmetric, skew-symmetric, skew-Hermitian, triangular, and Wishart matrices. Then, concepts of characteristic polynomial, eigendecomposition, eigenpair, eigenproblem, eigenspace, eigenvalue, and eigenvector are subsequently introduced. Faddeev–LeVerrier, von Mises, Gauss–Jordan, Pohlhausen, Lanczos–Arnoldi, Rayleigh–Ritz, Jacobi–Davidson, and Gauss–Seidel fundamental algorithms are given, while others (Francis–Kublanovskaya, Gram–Schmidt, Householder, Givens, Broyden–Fletcher–Goldfarb–Shanno, Davidon–Fletcher–Powell, and Saad–Schultz) are merely discussed. The eigenproblem has thus found its use in many topics. The applications discussed include solving Bessel’s, Helmholtz’s, Laplace’s, Legendre’s, Poisson’s, and Schrödinger’s equations. The algorithm extracting the first principal component is also provided. Full article

In nonlinear time series analysis, the mixture autoregressive model (MAR) is an effective statistical tool to capture the multimodality of data. However, the traditional methods usually need to assume that the error follows a specific distribution that is not adaptive to the dataset. This paper proposes a mixture autoregressive model via an asymmetric exponential power distribution, which includes normal distribution, skew-normal distribution, generalized error distribution, Laplace distribution, asymmetric Laplace distribution, and uniform distribution as special cases. Therefore, the proposed method can be seen as a generalization of some existing model, which can adapt to unknown error structures to improve prediction accuracy, even in the case of fat tail and asymmetry. In addition, an expectation-maximization algorithm is applied to implement the proposed optimization problem. The finite sample performance of the proposed approach is illustrated via some numerical simulations. Finally, we apply the proposed methodology to analyze the daily return series of the Hong Kong Hang Seng Index. The results indicate that the proposed method is more robust and adaptive to the error distributions than other existing methods. Full article

In this work, a new family of distributions based on the Laplace distribution is introduced. We define this new family by its stochastic representation as the sum of two independent random variables, one with a Laplace distribution and the other with an exponential distribution. Using a Monte Carlo simulation study, the statistical performance of the estimators obtained by the moments and maximum likelihood methods were empirically evaluated. We studied the coverage probabilities and mean length of the confidence intervals of the corresponding parameters based on the asymptotic normality of these estimators. This simulation study reported a good statistical performance of these estimators. Fits were made to three real data sets with the new distribution, two related to chemical concentrations and one to the environment, comparing it with three similar distributions given in the literature. We have used information criteria for the selection of models. These results showed that the exponentially modified Laplace model can be an alternative distribution to model skewed data with high kurtosis. The new approach is a contribution to the tools of statisticians and various professionals interested in modeling data with high kurtosis. Full article

In the field of financial risk measurement, Asymmetric Laplace (AL) laws are used. The assumption of normalcy is used in traditional approaches for calculating financial risk. Asymmetric Laplace distribution, on the other hand, reveals the properties of empirical financial data sets much better than the normal model by leptokurtosis and skewness. According to recent financial data research, the regularity assumption is frequently broken. As a result, Asymmetric Laplace laws offer a simple, creative, and useful option to normal distributions when it comes to modeling financial data. We here engage AL distribution to explore specific formulas for the two commonly used risk measures, Value-at-Risk (VaR) and Conditional Value-at-Risk (CVaR). The currency exchange rates data are used to and worked out to illustrate the proposed methodologies. Full article

We present the general results on the univariate tail conditional moments for a location-scale mixture of elliptical distributions. Examples include the location-scale mixture of normal, location-scale mixture of Student’s t, location-scale mixture of logistic, and location-scale mixture of Laplace distributions. More specifically, we give the tail variance, the tail conditional skewness, and the tail conditional kurtosis of generalised hyperbolic distribution and Student–GIG mixture distribution. We give an illustrative example, which discusses the TCE, TV, TCS and TCK of three stocks, including Amazon, Google and Apple. Full article

The database of the HWind project sponsored by the National Oceanic and Atmospheric Administration (NOAA) for hurricanes between 1994 and 2013 is analysed. This is the first objective of the current research. Among these hurricanes, Hurricane Sandy was selected for a detailed study due to the number of files available and its social relevance, with this being the second objective of this study. Robust wind speed statistics showed a sharp increase in wind speed, around 6 m s⁻¹ at the initial stage as Category 1, and a linear progression of its interquartile range, which increased at a rate of 0.54 m s⁻¹ per day. Wind speed distributions were initially right-skewed. However, they evolved to nearly symmetrical or even left-skewed distributions. Robust kurtosis was similar to that of the Gaussian distribution. Due to the noticeable fraction of wind speed intermediate values, the Laplace distribution was used, its scale parameter increasing slightly during the hurricane’s lifecycle. The key features of the current study were the surface and recirculation factor calculation. The surface area with a category equal to, or higher than, a tropical storm was calculated and assumed to be circular. Its radius increased linearly up to 600 km. Finally, parcel trajectories were spirals in the lower atmosphere but loops in the mid-troposphere due to wind translation and rotation. The recirculation factor varied, reaching values close to 0.9 and revealing atmospheric stratification. Full article