Search Results (137)

Valsartan (Val)—a lipophilic non-peptide angiotensin II type 1 receptor antagonist—is highly effective against hypertension and displaying limited solubility in water (3.08 μg/mL), thereby resulting in low oral bioavailability (23%). The limited water solubility of antihypertensive drugs can pose a challenge, particularly for rapid and precise administration. Herein, we synthesize and characterize valsartan-containing silver nanoparticles (Val-AgNPs) using Mangifera indica leaf extracts. The physicochemical, structural, thermal, and pharmacological properties of these nano-conjugates were established through various analytical and structural tools. The spectral shifts in both UV-visible and FTIR analyses indicate a successful interaction between the valsartan molecule and the silver nanoparticles. The resulting nano-conjugates are spherical and within the size range of 30–60 nm as revealed in scanning electron-EDS and atomic force micrographs. The log-normal distribution of valsartan-loaded nanoparticles, with a size range of 30 to 60 nm and a mode of 54 nm, indicates a narrow, monodisperse, and highly uniform particle size distribution. This is a favorable characteristic for drug delivery systems, as it leads to enhanced bioavailability and a consistent performance. Dynamic Light Scattering (DLS) analysis of the Val-AgNPs indicates a polydisperse sample with a tendency toward aggregation, resulting in larger effective sizes in the suspension compared to individual nanoparticles. The accompanying decrease in zeta potential (to −19.5 mV) and conductivity further supports the idea that the surface chemistry and stability of the nanoparticles changed after conjugation. Differential scanning calorimetry (DSC) demonstrated the melting onset of the valsartan component at 113.99 °C. The size-dependent densification of the silver nanoparticles at 286.24 °C correspond to a size range of 40–60 nm, showing a significant melting point depression compared to bulk silver due to nanoscale effects. The shift in Rf for pure valsartan to Val-AgNPs suggests that the interaction with the AgNPs alters the compound’s overall polarity and/or its interaction with the stationary phase, complimented in HPTLC and HPLC analysis. The stability and offloading behavior of Val-AgNPs was observed at pH 6–10 and in 40% and 80% MeOH. In addition, Val-AgNPs did not reveal hemolysis or significant alterations in blood cell indices, confirming the safety of the nano-conjugates for biological application. In conclusion, these findings provide a comprehensive characterization of Val-AgNPs, highlighting their potential for improved drug delivery applications. Full article

The advancement of smart packaging technology demands high-performance and sustainable sensing materials. While starch is a biodegradable natural polymer, its inherent high crystallinity restricts charge transport capability. This study developed a novel smart sensing film by incorporating ellagic acid-derived blue, fluorescent carbon dots (CDs) into phosphate starch (PS), which is rich in phosphorus. The effects of silver ions (Ag⁺), sodium carboxymethyl cellulose (CMC), and CDs on the film properties were systematically investigated. Results indicate that CDs act as flexible nano-crosslinkers, forming hydrogen bonds with PS molecular chains and effectively balancing strength and toughness—achieving a tensile strength of 5.1 MPa and an elongation at break of 24.1%. Phosphorus, in synergy with CDs, facilitates an efficient dual conduction pathway for ions and electrons: phosphate groups enable ion transport, while the conjugated carbon cores of the CDs provide electron transport channels. This synergistic effect significantly reduces the film’s electrical impedance from 6.93 × 10⁶ Ω to 1.12 × 10⁶ Ω (a reduction of 84%) and enhances thermal stability, increasing the char residue from 1.1% to 18.3%. The PS/CDs composite film exhibits a strong linear current response to pH in the range of 2–7 (R² = 0.9450), and shows enhanced discrimination between fresh orange juice (pH = 3.38) and spoiled orange juice (pH = 2.68), with a current change of 0.62 × 10⁻⁵ A. Moreover, the film exhibits strong blue fluorescence at 427 nm, with an intensity that shows a pronounced pH-dependent response. This study elucidates the mechanism by which phosphorus and CDs synergistically enhance the sensing performance of starch-based films, offering a new strategy for developing high-performance starch-based materials for smart packaging. Full article

Thanks to both endogenous and exogenous antioxidants (AOs), the antioxidant defense system ensures redox homeostasis, which is crucial for protecting the body from oxidative stress and maintaining overall health. The food industry also exploits the antioxidant properties to prevent or delay the oxidation of other molecules during processing and storage. There are many classical methods for assessing antioxidant capacity/activity, which are based on mechanisms such as hydrogen atom transfer (HAT), single electron transfer (SET), electron transfer with proton conjugation (HAT/SET mixed mode assays) or the chelation of selected transition metal ions (e.g., Fe²⁺ or Cu¹⁺). The antioxidant capacity (AOxC) index value can be expressed in terms of standard AOs (e.g., Trolox or ascorbic acid) equivalents, enabling different products to be compared. However, there is currently no standardized method for measuring AOxC. Nanoparticle sensors offer a new approach to assessing antioxidant status and can be used to analyze environmental samples, plant extracts, foodstuffs, dietary supplements and clinical samples. This review summarizes the available information on nanoparticle sensors as tools for assessing antioxidant status. Particular attention has been paid to nanoparticles (with a size of less than 100 nm), including silver (AgNPs), gold (AuNPs), cerium oxide (CeONPs) and other metal oxide nanoparticles, as well as nanozymes. Nanozymes belong to an advanced class of nanomaterials that mimic natural enzymes due to their catalytic properties and constitute a novel signal transduction strategy in colorimetric and absorption sensors based on the localized surface plasmon resonance (LSPR) band. Other potential AOxC sensors include quantum dots (QDs, <10 nm), which are particularly useful for the sensitive detection of specific antioxidants (e.g., GSH, AA and baicalein) and can achieve very good limits of detection (LOD). QDs and metallic nanoparticles (MNPs) operate on different principles to evaluate AOxC. MNPs rely on optical changes resulting from LSPR, which are monitored as changes in color or absorbance during synthesis, growth or aggregation. QDs, on the other hand, primarily utilize changes in fluorescence. This review aims to demonstrate that, thanks to its simplicity, speed, small sample volumes and relatively inexpensive instrumentation, nanoparticle-based AOxC assessment is a useful alternative to classical approaches and can be tailored to the desired aim and analytes. Full article

In this work, we investigated the influence of silver nanoparticle (AgNP) size (diameters of 20, 50, and 100 nm) and magnetic bead (MB) size (diameters from 100 to 4500 nm) on silver-gold galvanic exchange signal generation in magnetic electrochemical assays. Two conjugation strategies, including biotin-streptavidin interaction and a streptavidin-specific aptamer interaction, were compared to assess differences in binding chemistry and conjugation efficiency. Calibration studies showed that 50 nm diameter AgNPs provided the best sensitivity and galvanic exchange efficiency, yielding the lowest detection limits across both conjugation strategies. Larger AgNPs produced stronger signals but reached saturation rapidly, whereas smaller particles required higher concentrations to achieve equivalent silver content. Among MBs, 1000 nm beads consistently gave the highest galvanic exchange efficiency, offering sufficient surface area for AgNP loading while minimizing steric hindrance and electrode obstruction. These findings were confirmed by complementary electrochemical impedance spectroscopy, UV-Vis absorbance, and SEM imaging, which collectively demonstrated the strong influence of bead size on charge transfer resistance and conjugation efficiency. Overall, the combination of 50 nm AgNPs with 1000 nm MBs emerged as the optimal configuration, providing improved sensitivity and reproducibility. We believe these results offer valuable design guidelines for the development of next-generation aptamer-based electrochemical biosensors for biomarker detection. Full article

Antimicrobial hydrogels have attracted considerable attention for wound treatment due to the major clinical challenges of bacterial infections, which lead to delayed tissue regeneration and chronic inflammation. In addition, the strong adhesion of antimicrobial hydrogels to tissue surfaces is essential because wounds are generally moist, topographically irregular, and continuously exposed to various biological molecules. In this study, we developed in situ formed silver nanoparticle (Ag NP)-incorporated gallic acid-conjugated chitosan (CHI-G) hydrogels as bio-inspired antimicrobial and tissue adhesive materials. Ag/CHI-G hydrogels were successfully formed by the simultaneous reduction in Ag⁺ ions with a stable dispersion of Ag NPs. No additional reduction agents or crosslinkers were required to prepare the Ag/CHI-G hydrogels. In addition, the elastic moduli of the Ag/CHI-G hydrogels increased significantly with increasing concentrations of both AgNO₃ and CHI-G. Furthermore, the hydrogels exhibited excellent adhesion to the porcine intestinal tissue surfaces. The adhesive Ag/CHI-G hydrogels showed an inhibition of both Escherichia coli and Staphylococcus aureus with no significant cytotoxicity against NIH3T3 and CCD-18Co fibroblasts. Thus, in situ formed Ag/CHI-G hydrogels with adhesive, biocompatible, and antimicrobial properties are expected to be useful for versatile biomedical applications, such as drug delivery depots, tissue engineering hydrogels, and wound dressing materials. Full article

Silver sulfide quantum dots (Ag₂S QDs) are promising nanomaterials for biomedical applications due to their near-infrared emission and biocompatibility. In this study, Ag₂S QDs were synthesized using bovine serum albumin (BSA) as a stabilizing and reducing agent to assess their potential in targeted photothermal therapy. The QDs showed an average size of 1.06 ± 0.38 nm by DLS and 4.42 nm by TEM. Conjugation to an anti-PSG1 monoclonal antibody was performed via EDC/Sulfo-NHS chemistry and confirmed by FTIR spectroscopy, a decrease in zeta potential, and a redshift in emission. The conjugate exhibited an average size of 22.82 ± 9.7 nm and a zeta potential of +85.7 mV, indicating high colloidal stability. Fluorescence studies showed that the conjugate emits at 590 nm when excited at 560 nm, whereas the BSA-Ag₂S QDs (non-conjugated) emit at 480 nm upon excitation at 400 nm, reflecting changes in optical properties due to conjugation. Thermal imaging under 808 nm laser irradiation revealed efficient photothermal conversion, with temperature increases up to 13.6 °C at 200 μg/mL and a conversion efficiency of 11.41 ± 0.04%. The conjugate was non-cytotoxic to fibroblasts but induced selective cytotoxicity in HeLa cells after laser exposure, with a selectivity index of 3.0. These findings suggest that Ag₂S-BSA QDs conjugated with anti-PSG1 represent promising candidates for further investigation in cancer nanotheranostics. Full article

Esophageal squamous cell carcinoma (ESCC) accounts for the majority of esophageal cancers worldwide, with a poor prognosis and increasing resistance to conventional treatments. Faced with these limitations, nanoparticles (NPs) are attracting growing interest as innovative therapeutic agents capable of improving specificity and efficacy and reducing systemic toxicity. This study critically examines the pharmacological effects, mechanisms of action, and toxicity profiles of different metallic or organic nanoparticles tested on ESCC cell lines. Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA) 2020 guidelines were followed by a meticulous literature search of Google Scholar, Web of Science, PubMed/Medline, and Scopus databases to achieve this goal. The results show that the anti-tumor properties vary according to the type of nanoparticle (copper(II) oxide (CuO), silver (Ag), gold (Au), nickel(II) oxide (NiO), nano-curcumin, etc.), the synthesis method (chemical vs. green), and the biological activity assessment method (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT), Bromodeoxyuridine (BrdU), Cell Counting Kit-8 (CCK8) assays, etc.). NPs derived from green synthesis, such as those based on Moringa oleifera, Photinia glabra, or pomegranate bark, exhibit moderate cytotoxic activity (50% inhibitory concentration (IC₅₀) between 92 and 500 µg/mL) but show good tolerance on normal cells. In contrast, chemically synthesized NPs, such as Cu(II) complexes with 1,3,5-benzenetricarboxylic acid (H₃btc) or 1,2,4-triazole (Htrz), show lower IC₅₀ (34–86 µM), indicating more marked cytotoxicity towards cancer cells, although data on their toxicity are sometimes lacking. In addition, multifunctional nanoparticles, such as gold-based nano-conjugates targeting Cluster of Differentiation 271 (CD271) or systems combined with doxorubicin, show remarkable activity with IC₅₀ below 3 µM and enhanced tumor selectivity, positioning them among the most promising candidates for future clinical application against ESCC. The most frequently observed mechanisms of action include induction of apoptosis (↑caspases, ↑p53, ↓Bcl-2), oxidative stress, and inhibition of proliferation. In conclusion, this work identifies several promising nanoparticles (silver nanoparticles derived from Photinia glabra (PG), gold-based nano-immunoconjugates targeting CD271, and silver–doxorubicin complexes) for future pharmaceutical exploitation against ESCC. However, major limitations remain, such as the lack of methodological standardization, insufficient in vivo and clinical studies, and poor industrial transposability. Future prospects include the development of multifunctional nanocomposites, the integration of biomarkers for personalized targeting, and long-term toxicological assessment. Full article

Biogenic silver nanoparticles (AgNPs) were synthesized via a green chemistry strategy using wheat extract and subsequently functionalized with a carboxymethyl chitosan–cinnamaldehyde (CMC=CIN) conjugate through covalent imine bonding. The resulting nanohybrid (AgNP–CMC=CIN) was extensively characterized to confirm successful biofunctionalization: UV–Vis spectroscopy revealed characteristic cinnamaldehyde absorption peaks; ATR-FTIR spectra confirmed polymer–terpene bonding; and TEM analysis evidenced uniform nanoparticle morphology. Dynamic light scattering (DLS) measurements indicated an increase in hydrodynamic size upon coating (from 59.46 ± 12.63 nm to 110.17 ± 4.74 nm), while maintaining low polydispersity (PDI: 0.29 to 0.27) and stable surface charge (zeta potential ~ −30 mV), suggesting colloidal stability and homogeneous polymer encapsulation. Antifungal activity was evaluated against Fusarium oxysporum, Penicillium citrinum, Aspergillus niger, and Aspergillus brasiliensis. The minimum inhibitory concentration (MIC) against F. oxysporum was significantly reduced to 83 μg/mL with AgNP–CMC=CIN, compared to 708 μg/mL for uncoated AgNPs, and was comparable to the reference fungicide tebuconazole (52 μg/mL). Seed priming with AgNP–CMC=CIN led to improved germination (85%) and markedly reduced fungal colonization, while maintaining a favorable phytotoxicity profile. These findings highlight the potential of polysaccharide-terpene-functionalized biogenic AgNPs as a sustainable alternative to conventional fungicides, supporting their application in precision agriculture and integrated crop protection strategies. Full article

The therapeutic use of silver nanoparticles (AgNPs) has been increasing, especially in phototherapy strategies. The plasmonic properties of AgNPs have contributed to their excellent results as phototherapeutic agents, namely for photodynamic therapy (PDT), photothermal therapy (PTT), and photodynamic inactivation of microorganisms. Moreover, the capacity of these nanostructures to release silver ions (Ag⁺) and enhance the production of reactive oxygen species (ROS) has been explored in combination with light to treat several diseases. Moreover, synthesis, functionalization, and conjugation strategies with targeting agents have been widely studied to optimize selectivity and maximize the therapeutic efficacy of these nanoplatforms. In this work, we reviewed the recent advancements (2019–2024) in the use of AgNPs for phototherapy applications, with an emphasis on evaluating therapeutic efficacy and specific targeting. According to the literature, in oncology, AgNPs have been predominately employed in PTT-based strategies, demonstrating significant tumor cell death and preservation of healthy tissues, in both in vitro and in vivo studies. Concurrently, AgNP-mediated PDT has emerged as a promising approach for the eradication of bacteria and fungi, particularly those commonly associated with antibiotic resistance. The compiled data indicate that AgNPs represent an innovative and effective therapeutic alternative, with a strong potential for clinical translation, in both cancer treatment and the management of hard-to-treat infections. Full article

This study examines the cytotoxicity of two silver nanoparticle formulations—AgNPs conjugated with chlorhexidine (AgNPs-CHL) and AgNPs conjugated with polyethylene glycol and metronidazole (AgNPs-PEG-MET)—as examples of the surface functionalization of silver nanoparticles with drugs via sulfur–silver bonds and nitrogen–silver interactions. We previously reported the synthesis of these NPs and their efficiency in periodontitis treatment. Here, we analyze the relationships between the cytotoxic mechanisms of AgNPs and their surface chemistry. UV–Vis spectroscopy, dynamic light scattering (DLS), and scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDX) were used for physicochemical studies of the conjugates in two environments: aqueous solutions and commonly used cell culture media. Cytotoxicity was assessed in human fetal osteoblasts (hFOB 1.19) and human gingival fibroblasts (HGF-1) through BrdU and LDH assays, ROS detection, cell cycle analysis, apoptosis assays, and protein expression studies. AgNPs-CHL showed aggregation and increased hydrodynamic diameters in the culture medium, while AgNPs-PEG-MET remained stable. Both exhibited concentration-dependent cytotoxicity: AgNPs-CHL at 0.4–10 μg/mL and AgNPs-PEG-MET at 0.75–10 μg/mL. AgNPs-CHL, in which silver surface functionalization was realized via nitrogen–silver interactions, induced significant ROS generation, LDH release, and necroptosis, marked by increased RIP1, RIP3, and MLKL proteins. In the case of AgNPs-PEG-MET, where sulfur–silver bonds combined the drug via a PEG linker, they triggered apoptosis, as evidenced by elevated caspase-2 levels and flow cytometry. These findings highlight that the type of surface functionalization of silver nanoparticles significantly influences their physicochemical behavior and biological effects. Understanding these mechanisms is crucial in designing safer, more effective nanoparticle-based therapies for periodontal and other inflammatory conditions. Full article

Norovirus, a foodborne pathogen, causes a significant economic and health burden globally. Although detection methods exist, they are expensive and non-field deployable. A flow-based dielectrophoretic biosensor was designed for the detection of foodborne pathogenic viruses and was tested using bacteriophage MS2 as a norovirus surrogate. The flow-based MS2 sensor comprises a concentrator and a detector. The concentrator is an interdigitated electrode array designed to impart dielectrophoretic effects to manipulate viral particles toward the detector in a fluidic channel. The detector is made of a silver electrode conjugated with anti-MS2 IgG to allow for antibody–antigen biorecognition events and is supplied with the electrical current for the purpose of measurement. Serially diluted MS2 suspensions were continuously injected into the fluidic channel at 0.1 mL/min. A cyclic voltammogram indicated that current measurements from single-walled carbon nanotube (SWCNT)-coated electrodes increased compared to uncoated electrodes. Additionally, a drop in the current measurements after antibody immobilization and MS2 capture was observed with the developed electrodes. Antibody immobilization at the biorecognition site provided greater current changes with the antibody-MS2 complexes vs. the assays without antibodies. The electric field applied to the fluidic channel at 10 V_pp and 1 MHz contributed to an increase in current changes in response to MS2 bound on the detector and was dependent on the MS2 concentrations in the sample. The developed biosensor was able to detect MS2 with a sensitivity of 10² PFU/mL within 15 min. Overall, this work demonstrates a proof of concept for a rapid and field-deployable strategy to detect foodborne pathogens. Full article

This study focuses on the extraction, characterization, and biological evaluation of diterpenes from green coffee beans, specifically, cafestol and kahweol. These compounds, known for their potential health benefits, were isolated via optimized extraction and saponification processes. Separation was achieved using silver nitrate-impregnated silica gel, and structural elucidation was performed through advanced 1D and 2D NMR techniques, including HSQC, HMBC, and (IN)ADEQUATE. Due to kahweol’s instability, the research prioritized cafestol for the synthesis of rhodamine B conjugates. Initial ester-linked conjugates proved unstable, prompting the development of more robust derivatives through amide linkage strategies and further functionalization via acetylation and oxidation reactions. Some oxidation methods led to furan ring cleavage, impacting structural integrity. Selected compounds were tested for cytotoxicity using SRB assays on human tumor cell lines (MCF7, A2780) and non-malignant fibroblasts (NIH 3T3). While the parent diterpenes and many derivatives showed minimal activity, several cafestol–rhodamine B conjugates demonstrated notable cytotoxic effects. Compound 6, in particular, exhibited selective activity against cancer cells with reduced toxicity toward non-malignant cells. Full article

A simple and easily applicable analytical method for the simultaneous determination of Cd²⁺, Pb²⁺, Zn²⁺, Cu^2+, and Cl⁻ by applying a modified carbon paste electrode with saffron-conjugated silver nanoparticles (AgNPs@Sa) is being presented. The modified CPE was then used for the simultaneous determination of Cd²⁺, Pb²⁺, Zn²⁺, and Cu²⁺ as well as chloride ions in soil and plants. The comparative analysis demonstrated a significant enhancement in the applicability of the modified electrode through the incorporation of silver nanoparticles (AgNPs) at the carbon paste electrode (CPE) surface, leading to the development of a poly-Sa-CPE. This newly proposed method offers notably superior qualitative performance compared to other metal nanoparticle-based modifications reported in the literature. The accordingly modified electrode was successfully applied in the development of a chloride ion. A novel sensor is being proposed that makes possible the determination of heavy metals and chlorides in the same solution, in soil and plant samples. The enhanced sensitivity and selectivity of the poly-Sa-CPE system highlights its potential as a more effective alternative for heavy metal and chloride analysis, further demonstrating its advantages in electrochemical applications. The LODs of Cd²⁺, Pb²⁺, Zn^2+, Cu²⁺, and Cl⁻ for their simultaneous determination are 0.38 μg·L⁻¹, 0.44 μg·L⁻¹, 0.72 μg·L⁻¹, 0.42 μg·L⁻¹, and 0.11 μg·L⁻¹, respectively, with comparably high relative standard deviations of about 8.1%, 9.4%, 8.3%, 7.6%, and 7.9%, respectively. Full article

Here, we demonstrate through AFM imaging and CD spectroscopy that the binding of silver ions (Ag⁺) to poly(dGdC), a double-stranded (ds) DNA composed of two identical repeating strands, at a stoichiometry of one Ag⁺ per GC base pair induces a one-base shift of one strand relative to the other. This results in a ds nucleic acid-Ag⁺ conjugate consisting of alternating CC and GG base pairs coordinated by silver ions. The proposed organization of the conjugate is supported by the results of our Quantum Mechanical (QM) and Molecular Mechanics (MMs) calculations. The reduction of Ag⁺ ions followed by the partial oxidation of silver atoms yields a highly fluorescent conjugate emitting at 720 nm. This fluorescent behavior in conjugates of long, repetitive ds DNA (thousands of base pairs) with silver has never been demonstrated before. We propose that the poly(dGdC)–Ag conjugate functions as a dynamic system, comprising various small clusters embedded within the DNA and interacting with one another through energy transfer. This hypothesis is supported by the results of our QM and MMs calculations. Additionally, these DNA–silver conjugates, comprising silver nanoclusters, may possess conductive properties, making them potential candidates for use as nanowires in nanodevices and nanosensors. Full article

This study reports the development of highly conductive and stretchable fibrous membranes based on PVDF/PAN conjugate electrospinning with embedded silver nanoparticles (AgNPs) for wearable sensing applications. The fabrication process integrated conjugate electrospinning of PVDF/PAN, selective dissolution of polyvinylpyrrolidone (PVP) to create porous networks, and uniform AgNP incorporation via adsorption-reduction. Systematic optimization revealed that 10 wt.% PVP content and 1.2 mol/L AgNO₃ concentration yielded membranes with superior electrical conductivity (874.93 S/m) and mechanical strength (2.34 MPa). The membranes demonstrated excellent strain sensing performance with a gauge factor of 12.64 within 0–30% strain and location-specific sensing capabilities: moderate movements at wrist (ΔR/R₀: 98.90–287.25%), elbow (124.65–300.24%), and fingers (177.01–483.20%) generated stable signals, while knee articulation exhibited higher sensitivity (459.60–1316.48%) but significant signal fluctuations. These results demonstrate the potential of the developed conductive porous PVDF/PAN composite fibrous membranes for applications in wearable sensors, flexible electronics, and human-machine interfaces, particularly in scenarios requiring moderate-range motion detection with high reliability and stability. The findings suggest promising opportunities for developing next-generation wearable sensing devices through the optimization of conjugate electrospun fibrous membranes. Full article