Search Results (69,646)

Social anxiety is a prevalent mental health concern among college students, often intensified by academic and interpersonal pressures on campus. This study investigated the relationship between physical activity, loneliness, and social anxiety among college students, aiming to examine the mediating role of loneliness in the process of physical activity affecting social anxiety, as well as the moderating role of gender in this mediating effect. A cross-sectional research design was adopted, and data on physical activity levels, loneliness, and social anxiety were collected through questionnaires completed by 638 students at a university in China. This study conducted a single-factor Harman test, descriptive statistical analysis, reliability analysis, correlation analysis, and independent-samples t-tests, and it modeled the moderated mediation effect. The results showed that physical activity was significantly and negatively correlated with both loneliness and social anxiety. Loneliness played a mediating role in the influence of physical activity on social anxiety, and this mediating effect was moderated by gender, being more pronounced in the female group. This study concluded that physical activity can help alleviate social anxiety, but the mechanism involving the reduction of loneliness is more apparent in women, indicating the need to consider gender differences when developing interventions, as there may be other, more significant reasons for men. Full article

Background/Objectives: To simplify the decision-making process in radiomics by employing RadiomiX, an algorithm designed to automatically identify the best model combination and validate them across multiple environments was developed, thus enhancing the reliability of results. Methods: RadiomiX systematically tests classifier and feature selection method combinations known to be suitable for radiomic datasets to determine the best-performing configuration across multiple train–test splits and K-fold cross-validation. The framework was validated on four public retrospective radiomics datasets including lung nodules, metastatic breast cancer, and hepatic encephalopathy using CT, PET/CT, and MRI modalities. Model performance was assessed using the area under the receiver-operating-characteristic curve (AUC) and accuracy metrics. Results: RadiomiX achieved superior performance across four datasets: LLN (AUC = 0.850 and accuracy = 0.785), SLN (AUC = 0.845 and accuracy = 0.754), MBC (AUC = 0.889 and accuracy = 0.833), and CHE (AUC = 0.837 and accuracy = 0.730), significantly outperforming original published models (p < 0.001 for LLN/SLN and p = 0.023 for MBC accuracy). When original published models were re-evaluated using ten-fold cross-validation, their performance decreased substantially: LLN (AUC = 0.783 and accuracy = 0.731), SLN (AUC = 0.748 and accuracy = 0.714), MBC (AUC = 0.764 and accuracy = 0.711), and CHE (AUC = 0.755 and accuracy = 0.677), further highlighting RadiomiX’s methodological advantages. Conclusions: Systematically testing model combinations using RadiomiX has led to significant improvements in performance. This emphasizes the potential of automated ML as a step towards better-performing and more reliable radiomic models. Full article

Every year, a billion tires are discarded worldwide, with only a small percentage being recycled. This leads to significant environmental hazards, such as fire risks and improper disposal. Silty sand also presents technical challenges due to its poor shear strength, susceptibility to erosion, and low permeability. This study explores the incorporation of crumb rubber derived from waste tires into silty sand to enhance its mechanical properties. Crumb rubber particles of varying sizes (3–6 mm, 5–10 mm, and 10–20 mm) were mixed with silty sand at 0%, 3%, 6%, and 9% percentages, respectively. Triaxial compression tests of unconsolidated and consolidated undrained tests with cell pressures of 100, 300, and 500 kPa were conducted. The deviatoric stress, shear stress, and stiffness modulus were investigated. The results revealed that the addition of crumb rubber significantly increased the deviatoric and shear stresses, especially at particle sizes of 5–10 mm, with contents of 3%, 6%, and 9%. Additionally, the stiffness modulus was notably reduced in the mixture containing 6% crumb rubber tire. These findings suggest that incorporating crumb rubber tires into silty sand not only improves silty sand performance but also offers an environmentally sustainable approach to tire waste recycling, making it a viable strategy for silty sand stabilization in construction and geotechnical engineering performance. Full article

Background: This study aimed to examine the effects of an 8-week plyometric training program on lower-limb explosive strength, jump performance, musculotendinous stiffness, reactive strength index (RSI), and multidirectional speed in elite Polish badminton players. Methods: Twenty-four athletes were randomly assigned to either an experimental group (n = 15), which supplemented their regular badminton training with plyometric exercises, or a control group (n = 15), which continued standard technical training. Performance assessments included squat jump (SJ), countermovement jump (CMJ), single-leg jumps, sprint tests (5 m, 10 m), lateral movements, musculotendinous stiffness, and RSI measurements. Results: The experimental group showed statistically significant improvements in jump height, power output, stiffness, and 10 m sprint and lateral slide-step performance (p < 0.05), with large effect sizes. No significant changes were observed in the control group. Single-leg jump improvements suggested potential benefits for addressing lower-limb asymmetries. Conclusions: An 8-week plyometric intervention significantly enhanced lower-limb explosive performance and multidirectional movement capabilities in young badminton players. These findings support the integration of targeted plyometric training into regular training programs to optimize physical performance, improve movement efficiency, and potentially reduce injury risk in high-intensity racket sports. Full article

The accurate prediction of significant wave height presents a complex yet vital challenge in the fields of ocean engineering. This capability is essential for disaster prevention, fostering sustainable development and deepening our understanding of various scientific phenomena. We explore the development of a comprehensive predictive methodology for wave height prediction by integrating novel Takagi–Sugeno–Kang fuzzy models within a multiresolution analysis framework. The multiresolution analysis emerges via wavelets, since they are prominent models characterised by their inherent multiresolution nature. The maximal overlap discrete wavelet transform is utilised to generate the detail and resolution components of the time series, resulting from this multiresolution analysis. The novelty of the proposed model lies on its hybrid training approach, which combines least squares with AdaBound, a gradient-based algorithm derived from the deep learning literature. Significant wave height prediction is studied as a time series problem, hence, the appropriate inputs to the model are selected by developing a surrogate-based wrapped algorithm. The developed wrapper-based algorithm, employs Bayesian optimisation to deliver a fast and accurate method for feature selection. In addition, we introduce a projection step, to further refine the approximation capabilities of the resulting predictive system. The proposed methodology is applied to a real-world time series pertaining to spectral wave height and obtained from the Poseidon operational oceanography system at the Institute of Oceanography, part of the Hellenic Center for Marine Research. Numerical studies showcase a high degree of approximation performance. The predictive scheme with the projection step yields a coefficient of determination of $0.9991$, indicating a high level of accuracy. Furthermore, it outperforms the second-best comparative model by approximately $49\%$ in terms of root mean squared error. Comparative evaluations against powerful artificial intelligence models, using regression metrics and hypothesis test, underscore the effectiveness of the proposed methodology. Full article

The berth allocation and crane assignment problem (BACAP) is a key challenge in port logistics, particularly under dynamic and uncertain vessel arrival conditions. To address the limitations of existing methods in handling large-scale and high-disturbance scenarios, this paper proposes a novel optimization framework: Ternary Historical Memory-based Robust Clustered Particle Swarm Optimization (THM-RCPSO). In this method, the initial particle swarm is divided into multiple clusters, each conducting local searches to identify regional optima. These clusters then exchange information to iteratively refine the global best solution. A ternary historical memory mechanism further enhances the optimization by recording and comparing the best solutions from three different strategies, ensuring guidance from historical performance during exploration. Experimental evaluations on 25 dynamic BACAP benchmark instances show that THM-RCPSO achieves the lowest average vessel dwell time in 22 out of 25 cases, with the lowest overall average rank among five tested algorithms. Specifically, it demonstrates significant advantages on large-scale instances with 150 vessels, where it consistently outperforms competing methods such as HRBA, ACO, and GAMCS in both solution quality and robustness. These results confirm THM-RCPSO’s strong capability in solving dynamic and large-scale DBACAP scenarios with high disturbance levels. Full article

Pitaya (Selenicereus undatus) is a long-day climbing cactus that blooms in waves mostly on 1-year old, succulent leafless shoots called cladodes. Nonetheless, pitaya can also bloom on new-year growth if the buds of the cladodes are mature enough and competent for flower induction. Here, we tested, during two consecutive years, whether early pruning could have a positive effect on promoting more flowering waves, better fruiting, and heavier yield of ‘Korean White’ pitaya cultivated in unheated greenhouses of Southeastern Spain. The results show that pruning in January instead of March did not consistently modify the reproductive behavior of ‘Korean White’ pitaya in our conditions. Therefore, no significant effects on the number of blooming waves, flowering intensity, fruit set, quality or yield were observed. The only positive effect, not always significant, was an increase in fruit size that led to better fruit distribution into commercial categories in one out of the two experimental seasons. The lack of effect of early pruning was attributed to the prevalent low temperatures during winter in Spain. The results, however, suggest it is worthwhile exploring whether greenhouse heating with temperatures above pitaya’s base temperature may have the desired effects on increasing blooming waves. The profitability of this practice have to be carefully assessed. Full article

Background. Physicomechanical properties and clinical service of bulk-fill composites depend on their adequate polymerization and depth of cure. Some manufacturers claim that these composites can be adequately cured when used in bulks exceeding 4 mm. Objective. The aim of this study was to compare Vickers microhardness (VMH) and depth of cure (DOC) of six contemporary bulk-fill resin composites at depths of 4 mm and 6 mm. Material and methods. Six bulk-fill composites were evaluated in this study: 1. Tetric EvoCeram Bulk (Ivoclar Vivadent, Schaan, Liechtenstein), (TEC); 2. Filtek Bulk Fill Posterior (3M ESPE Dental Products Division, St. Paul, MN, USA), (FBF); 3. Filtek One Bulk Fill (3M ESPE Dental Products Division, St. Paul, MN, USA, (FOB); 4. SonicFill 2 (Kerr, Orange, CA, USA), (SF2); 5. Admira Fusion X-tra (Voco, GmbH, Cuxhaven, Germany), (AFX); 6. GrandioSO X-tra (Voco, GmbH, Cuxhaven, Germany), (GSX). The 18 specimens (3 of each composite) were prepared in split Teflon moulds of 4 mm diameter and 6 mm thickness. All composites were cured in standard mode for 20 s using LED LCU (D-Light Duo, RF-Pharmaceuticals Sarl, Geneva, Switzerland; 1200–1300 mW/cm). The VMH was measured using a digital Micro Hardness Tester Shimadzu (HMV-2T E, Shimadzu Corporation, Kyoto, Japan). A 50 g (0.5 N) load force was applied for 30 s. Each specimen was measured at five places selected by chance at each level (N = 15). The hardness ratio or DOC was calculated for all samples as the ratio of bottom and surface microhardness at levels of 4 and 6 mm. Data were analysed using one-way ANOVA and Tukey’s post hoc test. Results. Significant reduction in VMH was observed for all tested materials when comparing top surface and bottom (p < 0.01). The highest VMH was obtained for GSX and AFX, and the lowest for TEC. The results show that the degree of polymerization was adequate for all tested materials at a depth of 6 mm, since the hardness ratio exceeded 0.80 in all cases. The hardness ratio at 4 mm was high for all tested composites ranging from 0.91 for TEC to 0.98 for GSX. All composites showed adequate DOC at the bottom of the 6 mm bulk samples. However, the hardness ratio was the highest for Admira Fusion X-tra (0.96) and GrandioSO X-tra (0.97). Conclusions. All tested materials showed a significant decrease in microhardness from the top surface to the bottom. The DOC was adequate for all bulk-fill composites at a depth of 6 mm cured under standard mode for 20 s. All bulk-fill resin composites evaluated in this study can be used in bulk, up to 6 mm. Full article

Event-based vision sensors (EVSs), often referred to as neuromorphic cameras, operate by responding to changes in brightness on a pixel-by-pixel basis. In contrast, traditional framing cameras employ some fixed sampling interval where integrated intensity is read off the entire focal plane at once. Similar to traditional cameras, EVSs can suffer loss of sensitivity through scenes with high intensity and dynamic clutter, reducing the ability to see points of interest through traditional event processing means. This paper describes a method to reduce the negative impacts of these types of EVS clutter and enable more robust target detection through the use of individual pixel frequency analysis, background suppression, and statistical filtering. Additionally, issues found in normal frequency analysis such as phase differences between sources, aliasing, and spectral leakage are less relevant in this method. The statistical filtering simply determines what pixels have significant frequency content after the background suppression instead of focusing on the actual frequencies in the scene. Initial testing on simulated data demonstrates a proof of concept for this method, which reduces artificial scene noise and enables improved target detection. Full article

Fumonisins, primarily produced by Fusarium spp. and Aspergillus section nigri, are common contaminants in maize, cereal grains, and other processed and derived products, representing a significant risk to food safety and public health. This study presents the development and optimisation of a high-performance liquid chromatography method with fluorescence detection (HPLC-FLD) for the quantification of fumonisin B1 (FB1) and B2 (FB2) in various food matrices. In contrast with conventional protocols employing potassium phosphate buffers as the mobile phase, the proposed method utilises formic acid, offering enhanced compatibility with liquid chromatography systems. An automated online precolumn derivatisation with o-phthaldialdehyde (OPA) was optimised through experimental design and response surface methodology, enabling baseline separation of FB1 and FB2 derivatives in less than 20 min. The method demonstrated high sensitivity, with limits of detection of 0.006 µg mL⁻¹ for FB1 and 0.012 µg mL⁻¹ for FB2, and excellent repeatability (intraday RSD values of 0.85% and 0.83%, respectively). Several solid-phase extraction (SPE) strategies were evaluated to enhance sample clean-up using a variety of food samples, including dried figs, raisins, dates, corn, cornmeal, wheat flour, and rice. FumoniStar Inmunoaffinity columns were the only clean-up method that provided optimal recoveries (70–120%) across all tested food matrices. However, the MultiSep™ 211 column yielded good recoveries for both fumonisins in dried figs and raisins. Additionally, the C18 cartridge achieved acceptable recoveries for both fumonisins in dried figs and wheat flour. Full article

Background: Breast cancer is the most prevalent malignancy among women globally. In Romania, it is the most frequent form of cancer affecting women, with approximately 12,000 new cases diagnosed annually, and the second most common cause of cancer-related mortality, second only to lung cancer. Methods: This study looked at 79 breast cancer patients from Oltenia, concentrating on epidemiology, histology, diagnostic features, and treatments. Patients were chosen based on inclusion criteria such as histopathologically verified diagnosis, availability of clinical and treatment data, and follow-up information. The analyzed biological material consisted of tissue samples taken from the breast parenchyma and axillary lymph nodes. Even though not the primary subject of this paper, all patients underwent immunohistochemical (IHC) evaluation both preoperatively and postoperatively. Results: We found invasive ductal carcinoma to be the predominant type, while ductal carcinoma in situ (DCIS) and mixed types were rare. We performed cross-tabulations of metastasis versus nodal status and age versus therapy type; none reached significance (all p > 0.05), suggesting observed differences were likely due to chance. A chi-square test comparing surgical interventions (breast-conserving vs. mastectomy) in patients who did or did not receive chemotherapy showed, χ² = 3.17, p = 0.367, indicating that chemotherapy did not significantly influence surgical choice. Importantly, adjuvant chemotherapy and radiotherapy were used at similar rates across age groups, whereas neoadjuvant hormonal (endocrine) therapy was more common in older patients (but without statistical significance). Conclusions: Finally, we discussed the consequences of individualized care and early detection. Romania’s shockingly low screening rate, which contributes to delayed diagnosis, emphasizes the importance of improved population medical examination and tailored treatment options. Also, the country has one of the lowest rates of mammography uptake in Europe and no systematic population screening program. Full article

Machine learning and artificial intelligence have transformed fault detection and maintenance strategies for industrial machinery. This study applies well-established data-driven techniques to a rarely explored industrial application—the condition monitoring of high-precision paper cutting machines—enhancing condition-based maintenance to improve operational efficiency, safety, and cost-effectiveness. A key element of the proposed approach is the integration of an infrared pyrometer into vibration monitoring, utilizing accelerometer data to evaluate the state of health of machinery. Unlike traditional fault detection studies that focus on extreme degradation states, this work successfully identifies subtle deviations from optimal, which even expert technicians struggle to detect. Building on a feasibility study conducted with Tecnau SRL, a comprehensive diagnostic system suitable for industrial deployment is developed. Endurance tests pave the way for continuous monitoring under various operating conditions, enabling real-time industrial diagnostic applications. Multi-scale signal analysis highlights the significance of transient and steady-state phase detection, improving the effectiveness of real-time monitoring strategies. Despite the physical similarity of the classified states, simple time-series statistics combined with machine learning algorithms demonstrate high sensitivity to early-stage deviations, confirming the reliability of the approach. Additionally, a systematic analysis to downgrade acquisition system specifications identifies cost-effective sensor configurations, ensuring the feasibility of industrial implementation. Full article

Earthquakes, as one of the most destructive natural disasters, often cause significant casualties and severe economic losses. Accurate prediction of earthquake fatalities is of great importance for pre-disaster prevention and mitigation planning, as well as post-disaster emergency response deployment. To address the challenges of small sample sizes, high dimensionality, and strong nonlinearity in earthquake fatality prediction, this paper proposes an integrated modeling approach (PCA-IWOA-XGBoost) combining Principal Component Analysis (PCA), the Improved Whale Optimization Algorithm (IWOA), and Extreme Gradient Boosting (XGBoost). The method first employs PCA to reduce the dimensionality of the influencing factor data, eliminating redundant information and improving modeling efficiency. Subsequently, the IWOA is used to intelligently optimize key hyperparameters of the XGBoost model, enhancing the prediction accuracy and stability. Using 42 major earthquake events in China from 1970 to 2025 as a case study, covering regions including the west (e.g., Tonghai in Yunnan, Wenchuan, Jiuzhaigou), central (e.g., Lushan in Sichuan, Ya’an), east (e.g., Tangshan, Yingkou), north (e.g., Baotou in Inner Mongolia, Helinger), northwest (e.g., Jiashi in Xinjiang, Wushi, Yongdeng in Gansu), and southwest (e.g., Lancang in Yunnan, Lijiang, Ludian), the empirical results showed that the PCA-IWOA-XGBoost model achieved an average test set accuracy of 97.0%, a coefficient of determination (R²) of 0.996, a root mean square error (RMSE) and mean absolute error (MAE) reduced to 4.410 and 3.430, respectively, and a residual prediction deviation (RPD) of 21.090. These results significantly outperformed the baseline XGBoost, PCA-XGBoost, and IWOA-XGBoost models, providing improved technical support for earthquake disaster risk assessment and emergency response. Full article

Background: Temporomandibular disorders are a generic term referred to clinical conditions involving the jaw muscles and temporomandibular joint with multifactorial pattern and genetic background. The aim of this observational study was to investigate the correlation between craniomandibular disorders and the presence of occlusal alterations. A clinical evaluation of the occlusal and articular status of the patients was carried out, integrating the latter with the electromyographic recording the activity of the masseter and temporalis muscles. Methods: A clinical observational study on 20 adults assessed temporomandibular disorders using DC/TMD criteria, anamnesis, clinical exams, occlusal and electromyographic analyses. Occlusion was evaluated morphologically and functionally. Electromyography tested static/dynamic muscle activity. Data were statistically analyzed using t-tests and Pearson correlation (p < 0.05). Results: Electromyographic analysis revealed significant differences between subjects with and without visual correction, suggesting that visual input influences masticatory muscle activity. Correlations emerged between occlusal asymmetries and neuromuscular parameters. These findings highlight clinical implications for mandibular function, muscle symmetry, and the potential for therapeutic rebalancing through targeted interventions. Conclusions: The study demonstrates a significant correlation between visual–motor integration and masticatory muscle efficiency. It emphasizes lateralized neuromuscular activation’s influence on occlusal contact distribution. Moreover, it identifies mandibular torsion–endfeel inverse correlation as a potential diagnostic marker for craniomandibular dysfunctions via surface electromyography. Full article

Today, blockchain technologies are a separate, rapidly developing area. With rapid development, they open up a number of scientific problems. One of these problems is the problem of reliability, which is primarily associated with the use of cryptographic primitives. The threat of the emergence of quantum computers is now widely discussed, in connection with which the direction of post-quantum cryptography is actively developing. Nevertheless, the most popular blockchain platforms (such as Bitcoin and Ethereum) use asymmetric cryptography based on elliptic curves. Here, cryptographic primitives for blockchain systems are divided into four groups according to their functionality: keyless, single-key, dual-key, and hybrid. The main attention in the work is paid to the most significant cryptographic primitives for blockchain systems: keyless and single-key. This manuscript discusses possible scenarios in which, during practical implementation, the mathematical foundations embedded in the algorithms for generating a digital signature and encrypting data using algorithms based on elliptic curves are violated. In this case, vulnerabilities arise that can lead to the compromise of a private key or a substitution of a digital signature. We consider cases of vulnerabilities in a blockchain system due to incorrect use of a cryptographic primitive, describe the problem, formulate the problem statement, and assess its complexity for each case. For each case, strict calculations of the maximum computational costs are given when the conditions of the case under consideration are met. Among other things, we present a new version of the encryption algorithm for data stored in blockchain systems or transmitted between blockchain systems using elliptic curves. This algorithm is not the main blockchain algorithm and is not included in the core of modern blockchain systems. This algorithm allows the use of the same keys that system users have in order to store sensitive user data in an open blockchain database in encrypted form. At the same time, possible vulnerabilities that may arise from incorrect implementation of this algorithm are considered. The scenarios formulated in the article can be used to test the reliability of both newly created blockchain platforms and to study long-existing ones. Full article