Search Results (358)

Lanthanide rare earth elements possess significant promise for material applications owing to their distinctive optical and magnetic characteristics, as well as their versatile coordination capabilities. This study introduced a lanthanide-functionalized magnetic nanocellulose composite (NNC@Fe₃O₄@La(OH)₃) for effective phosphorus/nitrogen (P/N) ligand separation. The hybrid material employs the adaptable coordination geometry and strong affinity for oxygen of La³⁺ ions to show enhanced DNA-binding capacity via multi-site coordination with phosphate backbones and bases. This study utilized cellulose as a carrier, which was modified through carboxylation and amination processes employing deep eutectic solvents (DES) and polyethyleneimine. Magnetic nanoparticles and La(OH)₃ were subsequently incorporated into the cellulose via in situ growth. NNC@Fe₃O₄@La(OH)₃ showed a specific surface area of 36.2 m²·g⁻¹ and a magnetic saturation intensity of 37 emu/g, facilitating the formation of ligands with accessible La³⁺ active sites, hence creating mesoporous interfaces that allow for fast separation. NNC@Fe₃O₄@La(OH)₃ showed a significant affinity for DNA, with adsorption capacities reaching 243 mg/g, mostly due to the multistage coordination binding of La³⁺ to the phosphate groups and bases of DNA. Simultaneously, kinetic experiments indicated that the binding process adhered to a pseudo-secondary kinetic model, predominantly dependent on chemisorption. This study developed a unique rare-earth coordination-driven functional hybrid material, which is highly significant for constructing selective separation platforms for P/N-containing ligands. Full article

The discharge of oily wastewater threatens the ecosystem and human health, and the efficient treatment of oily wastewater is confronted with problems of high mass transfer resistance at the oil-water-solid multiphase interface, significant light shielding effect, and easy deactivation of photocatalysts. Although traditional physical separation methods avoid secondary pollution by chemicals and can effectively separate floating oil and dispersed oil, they are ineffective in removing emulsified oil with small particle sizes. To address these complex challenges, photocatalytic technology and photocatalysis-based improved technologies have emerged, offering significant application prospects in degrading organic pollutants in oily wastewater as an environmentally friendly oxidation technology. In this paper, the degradation mechanism, kinetic mechanism, and limitations of conventional photocatalysis technology are briefly discussed. Subsequently, the surface interface modulation functions of metal doping and heterojunction energy band engineering, along with their applications in enhancing the light absorption range and carrier separation efficiency, are reviewed. Focus on typical studies on the separation and degradation of aqueous and oily phases using photocatalytic membrane technology, and illustrate the advantages and mechanisms of photocatalysts loaded on the membranes. Finally, other new approaches and converging technologies in the field are outlined, and the challenges and prospects for the future treatment of oily wastewater are presented. Full article

The contamination of water bodies by industrial dyes poses a significant environmental challenge on a global scale. Conventional wastewater treatment methods often suffer from limitations related to high cost, limited efficiency, and potential secondary environmental impacts. Recent advances in photocatalytic technologies have highlighted the potential of metal sulfide-based photocatalysts, particularly those synthesized through environmentally friendly, plant-mediated approaches, as promising alternatives for efficient and sustainable dye degradation. However, despite their promising potential, metal sulfide photocatalysts often suffer from limitations such as photocorrosion, low stability under irradiation, and rapid recombination of charge carriers, which restrict their long-term applicability. In light of these challenges, this review provides a comprehensive examination of the physicochemical characteristics, synthetic strategies, and photocatalytic applications of metal sulfides. Particular emphasis is placed on green synthesis routes employing plant-derived extracts, which offer environmentally benign and sustainable alternatives to conventional methods. Moreover, the review elucidates various modification approaches, most notably, the formation of heterostructures, as viable strategies to enhance photocatalytic efficiency and mitigate the aforementioned drawbacks. The green synthesis of metal sulfides, aligned with the principles of green chemistry, offers a promising route toward the development of sustainable and environmentally friendly water treatment technologies. Full article

Background: During food processing and storage, traditional protein-based delivery systems encounter significant challenges in maintaining the structural and functional integrity of bioactive compounds, primarily due to their temporal instability. Methods: In this study, a nanocomposite hydrogel was prepared through the co-assembly of a self-assembling peptide, 9-Fluorenylmethoxycarbonyl-phenylalanine-arginine-glycine-aspartic acid-phenylalanine (Fmoc-FRGDF), and hyaluronic acid (HA). The stability of this hydrogel as a quercetin (Que) delivery carrier was systematically investigated. Furthermore, the impact of Que co-assembly on the microstructural evolution and physicochemical properties of the hydrogel was characterized. Concurrently, the encapsulation efficiency (EE%) and controlled release kinetics of Que were quantitatively evaluated. Results: The findings indicated that HA significantly reduced the storage modulus (G′) from 256.5 Pa for Fmoc-FRGDF to 21.1 Pa with the addition of 0.1 mg/mL HA. Despite this reduction, HA effectively slowed degradation rates; specifically, residue rates of 5.5% were observed for Fmoc-FRGDF alone compared to 14.1% with 0.5 mg/mL HA present. Notably, Que enhanced G′ within the ternary complex, increasing it from 256.5 Pa in Fmoc-FRGDF to an impressive 7527.0 Pa in the Que/HA/Fmoc-FRGDF hydrogel containing 0.1 mg/mL HA. The interactions among Que, HA, and Fmoc-FRGDF involved hydrogen bonding, electrostatic forces, and hydrophobic interactions; furthermore, the co-assembly process strengthened the β-sheet structure while significantly promoting supramolecular ordering. Interestingly, the release profile of Que adhered to the Korsmeyer–Peppas pharmacokinetic equations. Conclusions: Overall, this study examines the impact of polyphenol on the rheological properties, microstructural features, secondary structure conformation, and supramolecular ordering within peptide–polysaccharide–polyphenol ternary complexes, and the Fmoc-FRGDF/HA hydrogel system demonstrates a superior performance as a delivery vehicle for maintaining quercetin’s bioactivity, thereby establishing a multifunctional platform for bioactive agent encapsulation and controlled release. Full article

At emergency sites, bacteria in the environment can cause secondary wound infections. Timely treatment of infected wounds can improve the prognosis. In this study, we designed a closed-loop system for real-time wound infection monitoring and electronically controlled drug release, enabling rapid and stable deployment at disaster sites. Multilayer screen-printed electrodes were developed to detect uric acid (UA), pH, and temperature biomarkers. The electrode’s outermost layer was shielded by a zwitterionic conductive hydrogel (Gel) to prevent environmental interference and achieve systematic antibacterial protection through in situ reduction of silver nanoparticles (AgNPs) on its surface. For rapid and efficient drug delivery, amikacin (Ami) loaded cationic liposomes (Lipo) embedded in the zwitterionic conductive hydrogel (Gel-Lipo@Ami) were integrated as the core therapeutic carrier. This closed-loop system provides timely infection detection and enables in situ treatment during emergency rescues. Full article

Encouraging discoveries and excellent advances in the fight against cancer have led to innovative therapies such as photothermal therapy (PTT), photodynamic therapy (PDT), drug targeting (DT), gene therapy (GT), immunotherapy (IT), and therapies that combine these treatments with conventional chemotherapy (CT). Furthermore, 2,041,910 new cancer cases and 618,120 cancer deaths have been estimated in the United States for the year 2025. The low survival rate (<50%) and poor prognosis of several cancers, despite aggressive treatments, are due to therapy-induced secondary tumorigenesis and the emergence of drug resistance. Moreover, serious adverse effects and/or great pain usually arise during treatments and/or in survivors, thus lowering the overall effectiveness of these cures. Although prevention is of paramount importance, novel anticancer approaches are urgently needed to address these issues. In the field of anticancer nanomedicine, carbon nanotubes (CNTs) could be of exceptional help due to their intrinsic, unprecedented features, easy functionalization, and large surface area, allowing excellent drug loading. CNTs can serve as drug carriers and as ingredients to engineer multifunctional platforms associated with diverse treatments for both anticancer therapy and diagnosis. The present review debates the most relevant advancements about the adjuvant role that CNTs could have in cancer diagnosis and therapy if associated with PTT, PDT, DT, GT, CT, and IT. Numerous sensing strategies utilising various CNT-based sensors for cancer diagnosis have been discussed in detail, never forgetting the still not fully clarified toxicological aspects that may derive from their extensive use. The unsolved challenges that still hamper the possible translation of CNT-based material in clinics, including regulatory hurdles, have been discussed to push scientists to focus on the development of advanced synthetic and purification work-up procedures, thus achieving more perfect CNTs for their safer real-life clinical use. Full article

Swine wastewater (SW) has a high chemical oxygen demand (COD) content and is difficult to degrade; an effective strategy to address this issue is through biodegradation, which poses negligible secondary pollution risks and ensures cost-efficiency. The objectives of this study were to isolate an effective COD-degrading strain of SW, characterize (at the molecular level) its transformation of SW, and apply it to practical production. A strain of Corynebacterium xerosis H1 was isolated and had a 27.93% ± 0.68% (mean ± SD) degradation rate of COD in SW. This strain precipitated growth in liquids, which has the advantage of not needing to be immobilized, unlike other wastewater-degrading bacteria. Based on analysis by Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR MS), this bacterium removed nitrogen-containing compounds in SW, with proteins and lipids decreasing from 41 to 10% and lignins increasing from 51 to 82%. Furthermore, the enhancement of the sequencing batch reactor (SBR) with strain H1 improved COD removal in effluent, with reductions in the fluorescence intensity of aromatic protein I, aromatic protein II, humic-like acids, and fulvic acid regions. In addition, based on 16S rRNA gene sequencing analysis, SBR_H1 successfully colonized some H1 bacteria and had a higher abundance of functional microbiota than SBR_C. This study confirms that Corynebacterium xerosis H1, as a carrier-free efficient strain, can be directly applied to swine wastewater treatment, reducing carrier costs and the risk of secondary pollution. The discovery of this strain enriches the microbial resource pool for SW COD degradation and provides a new scheme with both economic and environmental friendliness for large-scale treatment. Full article

The shortage of tellurium and toxicity of lead are major obstacles to scaling mid-temperature thermoelectric generators. We engineer quaternary lead chalcogenides with composition (Pb_0.8Ge_0.2Te)_0.95-x(PbSe)_0.05(PbS)_x (0 ≤ x ≤ 0.25), where Pb is lead, Ge is germanium, Te is tellurium, Se is selenium, S is sulfur, and x denotes the molar fraction of lead sulfide (PbS). The primary novelty lies in achieving ultra-low thermal conductivity through controlled phase segregation induced by systematic PbS incorporation. X-ray diffraction analysis reveals single-phase solid solutions up to x ≈ 0.10, with secondary PbS precipitates forming beyond this threshold. These PbS-rich phases create hierarchical microstructures that scatter phonons across multiple length scales, suppressing total thermal conductivity to 0.6 Wm⁻¹K⁻¹ at x = 0.15—approximately 84% lower than pristine lead telluride (PbTe) and approaching glass-like thermal conductivity values. Electrical transport measurements demonstrate sulfur’s role as an electron donor, enabling carrier-type control from p-type to n-type conduction. Despite moderate electrical power factors, the optimized composition (x = 0.20) achieves a peak dimensionless figure of merit ZT ≈ 0.34 at 650 K. This work demonstrates an effective strategy for tellurium-lean, lead-reduced thermoelectric materials through sulfur-induced phase segregation, providing practical design guidelines for sustainable waste heat recovery applications. Full article

Under the accelerating global energy restructuring and the deepening carbon neutrality strategy, hydrogen energy has emerged with increasing strategic value as a zero-carbon secondary energy carrier. Water electrolysis technology based on renewable energy is regarded as an ideal pathway for large-scale green hydrogen production. However, polymer electrolyte membrane (PEM) conventional water electrolysis faces dual constraints in economic feasibility and scalability due to its high electrical energy consumption and reliance on noble metal catalysts. The mixed ionic-electronic conducting oxygen transport membrane (MIEC–OTM) reactor technology offers an innovative solution to this energy efficiency-cost paradox due to its thermo-electrochemical synergistic energy conversion mechanism and process integration. This not only overcomes the thermodynamic equilibrium limitations in traditional electrolysis but also reduces electrical energy demand by effectively coupling with medium- to high-temperature heat sources such as industrial waste heat and solar thermal energy. Therefore, this review, grounded in the physicochemical mechanisms of oxygen transport membrane reactors, systematically examines the influence of key factors, including membrane material design, catalytic interface optimization, and parameter synergy, on hydrogen production efficiency. Furthermore, it proposes a roadmap and breakthrough directions for industrial applications, focusing on enhancing intrinsic material stability, designing multi-field coupled reactors, and optimizing system energy efficiency. Full article

ABCC6, a key regulator in ectopic calcification, plays a crucial role in mineralization through the modulation of extracellular purinergic pathways and production of inorganic pyrophosphate (PPi), which inhibits calcification. Inherited deficiencies in ABCC6 lead to pseudoxanthoma elasticum (PXE) and related conditions, characterized by calcification in various tissues, particularly affecting the skin, eyes, and cardiovascular system. Although PXE does not directly impact the nervous system, secondary neurological issues arise from cerebrovascular complications, increasing the risk of strokes linked to arterial blockages resembling atherosclerosis. This review investigates the connection between ABCC6 mutations and cerebral small vessel disease (SVD), expanding the understanding of PXE and related phenotypes. Mutations in ABCC6, identified as causing PXE, contribute to systemic metabolic dysfunction, with significant implications for cerebrovascular health. An association between ABCC6 mutations and cerebral SVD has been suggested in various studies, particularly in populations with distinct genetic backgrounds. Emerging evidence indicates that pathogenic mutations increase the risk of ischemic strokes, with both homozygous and heterozygous carriers showing susceptibility. Mechanistically, ABCC6 deficiency is implicated in dyslipidemia and atherosclerosis, further exacerbating cerebrovascular risks. Increased arterial pulsatility, linked to carotid siphon calcification, may also contribute to microvascular damage and subsequent brain injury. Understanding these mechanisms is vital for developing targeted diagnostic and therapeutic strategies for managing cerebrovascular risks in PXE patients. This review emphasizes the need for comprehensive genetic screening and the consideration of traditional vascular risk factors in patient management, highlighting the complex interplay between genetic mutations and environmental influences affecting cerebrovascular health. Future research should focus on longitudinal studies to elucidate the causal pathways linking arterial calcification, pulsatility, and brain damage in PXE. Full article

Traditional villages (TVs) and intangible cultural heritage (ICH) serve as dual carriers for the living transmission of agrarian civilization, with their spatial compatibility being crucial for the sustainable development of cultural ecosystems. Existing research shows deficiencies in quantitative analysis, multidimensional driving mechanism interpretation, and spatial heterogeneity identification. This study establishes a three-phase framework (“spatial pattern identification–spatial relationship analysis–impact mechanism assessment”) using nationwide data encompassing 8155 TVs and 3587 ICH elements. Through the comprehensive application of the spatial mismatch index, Optimal-Parameter Geographic Detector (OPGD), and multiscale geographically weighted regression (MGWR) model, we systematically reveal their spatial differentiation patterns and driving mechanisms. Key findings: First, TVs exhibit a “three-primary-core and two-secondary-core” strong agglomeration pattern, while ICH shows multi-center balanced distribution. Significant positive spatial correlation coexists with prevalent mismatch: 65% of China’s territory displays positive mismatch (ICH dominance) and 35% displays negative mismatch (TV dominance). Second, the spatial mismatch mechanism follows a “weakened natural foundation with dual drivers of socio-economic dynamics and cultural policy momentum”, where the GDP, tertiary industry ratio, general public budget expenditure, number of ICH inheritors, museums, and key cultural relic protection units emerge as dominant factors. Third, core drivers demonstrate significant spatial heterogeneity, with economic factors showing differentiated regulation while cultural policy elements exhibit distinct regional dependency. The proposed “economy–culture” dual governance approach, featuring cross-scale analysis methods and three-dimensional indicator system innovation, holds practical value for optimizing cultural heritage spatial governance paradigms. Full article

Chalcopyrite (CuFeS₂) has attracted interest as a thermoelectric material due to its narrow bandgap and its ability to tailor its carrier concentration through doping. In this study, we investigated the effects of Ni²⁺ substitution at Cu⁺ sites in chalcopyrite (Cu_1−xNi_xFeS₂) on its structural, microstructural, and thermoelectric properties. Samples were synthesized using mechanical alloying followed by hot pressing to ensure high-density compaction. X-ray diffraction analysis confirmed the formation of the tetragonal chalcopyrite phase without detectable secondary phases. The observed reduction in lattice parameters with increasing Ni content provided evidence of successful Ni incorporation at Cu sites within the chalcopyrite structure. Microstructural analysis and elemental mapping further supported the uniform distribution of Ni within the chalcopyrite matrix. Thermoelectric property measurements revealed that Ni-doped chalcopyrite exhibited n-type conduction. As the Ni concentration increased, the carrier concentration and electrical conductivity increased significantly, with Cu_0.92Ni_0.08FeS₂ achieving the highest electrical conductivity of 2.5 × 10⁴ Sm⁻¹ at 723 K. However, the absolute value of the Seebeck coefficient decreased with increasing Ni doping, following the expected trade-off between electrical conductivity and thermopower. The optimized composition, Cu_0.96Ni_0.04FeS₂, exhibited the highest thermoelectric performance, with a power factor of 0.50 mWm⁻¹K⁻² and a maximum dimensionless figure of merit (ZT) of 0.18 at 623 K. Compared to undoped chalcopyrite, these enhancements represent a 43% increase in power factor and a 50% improvement in ZT. Full article

Ammonia (NH₃) and hydrogen (H₂) are considered promising fuels for the power sector’s decarbonization. Their combustion is capable of producing energy with zero direct CO₂ emissions, and ammonia can act as a stable energy H₂ carrier. This study numerically investigates the design and implementation of staged combustion of a mixture of NH₃/H₂ by means of CFD simulations. The investigation employed the single-phase flow RANS governing equations and the eddy dissipation concept (EDC) combustion model, with the incorporation of a detailed kinetic mechanism. The combustion chamber operates under the RQL (rich–quench–lean) combustion regime. The first stage operates under rich conditions, firing mixtures of ammonia in air, enriched by hydrogen (H₂) to enhance combustion properties in a swirl and bluff-body stabilized burner. The secondary stage injects additional air and hydrogen to mitigate unburnt ammonia and NO_x emissions. Simulations of the first stage were performed for a thermal input ranging from 4 kW to 8 kW and flames with an equivalence ratio of 1.2. In the second stage, additional hydrogen is injected with a thermal input of either 1 kW or 2 KW, and air is added to adjust the global equivalence ratio to 0.6. Full article

Background/Objectives: The clinical utility of reproductive carrier screening varies based on the genes tested, variant reporting policies, and the screened patient population. This study aims to evaluate the outcomes of carrier screening among reproductive couples undergoing testing in a routine clinical setting. Methods: A total of 1595 couples, primarily referred by reproductive endocrinology and infertility specialists, underwent couple-based carrier screening across 390 genes. Carrier states were assessed on a couple basis and reported only if a couple were at risk of having affected offspring. At-risk conditions were classified by severity, as well as their likelihood of clinical impact based on the specific variants detected in each at-risk couple. Secondary findings with potential personal utility were also evaluated. Results: Among the screened couples, 4.2% were at risk of having a child with a genetic condition. When limited to high-clinical-impact results, the at-risk couple rate decreased to 1.0%, with 44% of these cases involving CFTR, SMN1, or FMR1. Secondary findings were identified in 1.7% of individuals. Conclusions: Carrier screening for only CFTR, SMN1, and FMR1 will miss more than half of at-risk couples, underscoring the importance of broader carrier screening. Specific variants and their combinations can influence the predicted clinical impact of at-risk conditions, marking a key advantage of couple-based reporting. Secondary findings were common, highlighting the importance of discussing these potential findings during pre-test counselling. Full article

Background/Objectives: Red blood cell (RBC) parameters are routinely used to screen for α- and β-thalassemia traits as part of prenatal diagnosis for severe fetal thalassemia in countries with a high prevalence of the disease. In clinical practice, the same cut-off values for these parameters are applied to both females and males. However, given that the normal reference ranges for some RBC parameters differ significantly between sexes, sex-specific cut-off values may be more appropriate, especially in combination. To date, the effectiveness of RBC indices in males for predicting α- and β-thalassemia traits has not been evaluated. The objectives of this study are to assess the diagnostic performance of individual and combined RBC parameters in detecting α⁰-thalassemia traits among non-anemic males. Methods: This diagnostic study is a secondary analysis of prospectively collected data from our project on prenatal control of severe thalassemia. The study population comprised male partners of pregnant women who underwent thalassemia screening during their first antenatal visit. RBC parameters, including hemoglobin (Hb), hematocrit (Hct), mean corpuscular volume (MCV), mean corpuscular hemoglobin (MCH), mean corpuscular hemoglobin concentration (MCHC), red cell distribution width (RDW), and RBC count, were measured for each participant. Carrier status for the α0-thalassemia Southeast Asian (SEA) genotype was confirmed by using a polymerase chain reaction (PCR)-based method. The diagnostic performance of each RBC parameter and their combinations, based on predictive models generated using logistic regression, was evaluated and compared using receiver operating characteristic (ROC) curves. Results: A total of 486 Thai males were recruited for the study, including 137 individuals with the α⁰-thalassemia trait and 349 with a normal α-thalassemia genotype (control group). All RBC parameters, except for Hct, differed significantly between the two groups. Among the individual indices, MCH exhibited the highest diagnostic accuracy, followed by MCV, with areas under the curve (AUCs) of 0.981 and 0.973, respectively. An MCH cut-off value of 26 pg and an MCV cut-off value of 80 fL provided a sensitivity of 100% for both indices, with specificities of 88.5% and 86.8%, respectively. The combination predictive model provided the best diagnostic performance, achieving an AUC of 0.987, which was slightly but significantly higher than that of any individual parameter. This model yielded a sensitivity of 100% and a significantly higher specificity of 90.8% at a cut-off probability of 7.0%. Conclusions: MCH and MCV demonstrated excellent screening performance for identifying α0-thalassemia carriers in males. However, the combination model exhibited even greater accuracy while reducing the false-positive rate. Implementing this model could minimize the need for unnecessary PCR testing, leading to substantial cost savings. Full article