Search Results (97)

With the rapid development of low-altitude UAVs, accurate wind detection is crucial for ensuring flight safety and enabling broader applications. To address this need, this paper introduces a highly integrated CDWL system specifically designed for compact UAV platforms. The system incorporates a self-compensating Harris Hawks Optimization (SC-HHO) retrieval algorithm, which is tailored to the high-dynamic flight environment and stringent payload constraints of UAVs. This algorithm enables real-time wind retrieval with low dependence on external reference data while effectively compensating for platform motion. The performance of the proposed system was validated through the comparative experiment and the UAV-borne experiment. In the comparative experiment, the CDWL showed correlation coefficients above 0.976 in horizontal wind speed and 0.987 in horizontal wind direction relative to a benchmark airborne CDWL system, with corresponding root-mean-square errors better than 0.395 m/s and 4.135°, respectively. During the UAV-borne experiment, the CDWL retrieved platform velocity using the self-compensating mechanism, achieving a standard deviation of 0.080 m/s relative to global navigation satellite system (GNSS) measurements, and successfully acquired wind field information. These results confirm that the developed system provides a viable and practical technical solution for UAV-based remote wind sensing. Full article

Polar Stratospheric Clouds (PSC) have been observed by the lidar observatory at Concordia station since 2014. The Concordia lidar is one of a few primary lidar stations in Antarctica of the Network for the Detection of Atmospheric Composition Change (NDACC). The lidar system was deployed at McMurdo from 2004 to 2010 and has been upgraded before its installation at Concordia. Concordia station is one of the most favourable locations for the observation of polar stratospheric clouds, due to the limited cloud cover by tropospheric clouds and the ubiquitous presence of PSCs throughout the Antarctic winter. The PSCs observations have been synchronized with the overpasses of satellite borne lidars, CALIOP (Cloud-Aerosol Lidar with Orthogonal Polarization) on the CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation) satellite from 2014 to June 2023, and the Atmospheric Lidar (ATLID) on the EarthCARE (Earth, Cloud, Aerosol and Radiation Explorer) mission since September 2024. A modified v2 algorithm, used for the detection and classification of PSCs as observed by CALIOP, has been used to determine detection limits and classification criteria. This facilitates comparison with CALIOP PSC profiles during quasi-coincident overpasses of the CALIPSO with respect to Concordia station. A local PSC climatology has been produced, with typically more than 150 profiles per PSC season. Considerable inter-annual variations have been observed, mostly depending on the local temperature. The data have been used to infer a decadal trend of PSC occurrences, although the large inter-annual variability renders such an approach difficult. The occurrences of the different PSC types show a strong correlation with the local temperature and depend on the formation processes and the formation temperatures of the different PSCs. Full article

The coherent speckle noise in synthetic aperture radar (SAR) imagery, together with complex sea clutter and large variations in ship target scales, poses significant challenges to accurate and robust ship detection, particularly under strict lightweight constraints required by satellite-borne and airborne platforms. To address this issue, this paper proposes a high-precision lightweight detection network, termed High-Lightweight Net (HLNet), specifically designed for SAR ship detection. The network incorporates a novel multi-scale backbone, Multi-Scale Net (MSNet), which integrates dynamic feature completion and multi-core parallel convolutions to alleviate small-target feature loss and suppress background interference. To further enhance multi-scale feature fusion while reducing model complexity, a lightweight path aggregation feature pyramid network, High-Lightweight Feature Pyramid (HLPAFPN), is introduced by reconstructing fusion pathways and removing redundant channels. In addition, a lightweight detection head, High-Lightweight Head (HLHead), is designed by combining grouped convolutions with distribution focal loss to improve localization robustness under low signal-to-noise ratio conditions. Extensive experiments conducted on the public SSDD and HRSID datasets demonstrate that HLNet achieves mAP₅₀ scores of 98.3% and 91.7%, respectively, with only 0.66 M parameters. Extensive evaluations on the more challenging CSID subset, composed of complex scenes selected from SSDD and HRSID, demonstrate that HLNet attains an mAP₅₀ of 75.9%, outperforming the baseline by 4.3%. These results indicate that HLNet achieves an effective balance between detection accuracy and computational efficiency, making it well-suited for deployment on resource-constrained SAR platforms. Full article

As one of the key payloads for space-borne gravitational wave detection (SGWD), the phasemeter is primarily responsible for conducting phase measurements of heterodyne signals. A phase extraction precision at the micro-radian level constitutes a crucial performance metric for intersatellite heterodyne interferometry. In this work, an ultra-stable hexagonal optical bench was developed using hydroxide-catalysis bonding technology. Different beat-notes were generated in accordance with the requirements of four experimental stages, which were applied to simulate the main beat-note of the inter-satellite scientific interferometer, thereby verifying the phase measurement performance of the phasemeter for beat-notes. Experimental results demonstrate that the phase extraction precision meets the index requirement of $2\pi \mu \mathrm{rad}/\sqrt{\mathrm{Hz}}$ for SGWD missions. Based on the test environment of the ultra-stable hexagonal optical bench, the feasibility of the phasemeter’s core phase measurement function was verified, laying a solid foundation for subsequent research on its auxiliary functions and extended tests. Full article

Space-borne gravitational wave (GW) detection is poised to significantly advance the frontiers of astrophysics, gravitation, and cosmology, which might make it possible to measure the fundamental symmetries of space-time. A critical component in GW detection is the employment of ultra-stable oscillators (USOs) on each satellite, serving as precision timing references to drive analog-to-digital converters (ADCs) for digital sampling of GW signals. Achieving the required sensitivity in GW detection hinges on highly accurate clock timing. However, the challenges posed by ADC aperture jitter and sampling clock jitter cannot be overlooked. They disrupt sampling timing, introduce clock noise, and distort the digitized signal, thus limiting the effectiveness of GW detection in space. To overcome this problem, researchers have developed pilot tone correction techniques and proposed innovative clock noise calibrated time-delay interferometry (TDI), optical comb TDI techniques, and sideband arm locking techniques that effectively suppress the effects of clock noise. This study provides an in-depth and comprehensive summary of the current status of clock noise and its suppression techniques in the space-borne GW detection. Through a systematic review and analysis, the aim is to provide theoretical and experimental technical support and optimization suggestions for the implementation of China’s space-borne GW detection mission. Full article

The continuous monitoring of forest vegetation conditions is of the utmost importance. The commonly used tools for assessing vegetation conditions are the normalized difference vegetation index (NDVI) and its successor—the enhanced vegetation index (EVI). In this study, the NDVI and EVI were coupled with the data on the number of dead trees removed during sanitation felling in an area of 13,780 km² during the period 2015–2022. In order to determine which satellite-borne index best represents the actual condition of vegetation in forests of the European temperate zone, the classes of the trend in changes in the NDVI and EVI were compared with the respective trends in the volume of dead trees, following the assumption that a positive trend in the spectral index values should be reflected by a negative trend in the volume of dead trees, and vice versa. The analyses were carried out for pixels within the all-species mask in the study area and for pixels representing individual tree species. NDVI is a good predictor of forest vegetation in the European temperate zone and is substantially better than EVI. Spatially, NDVI yields more pixels showing a negative slope for the trend in changes in the spectral index values, while EVI seems to overestimate the number of positive slopes. A larger number of negative slopes in the trend in changes in NDVI seems to agree with the increasing volume of dead trees in the analysed period. Comparing the detected trend class masks for spectral indices and the multi-annual course of dead trees, in 12 out of 16 cases, the slopes of the trend in changes in NDVI agree with the slopes of the trend in the volume of dead trees, while for EVI, this number is reduced to 9. In addition, NDVI reflects the condition of coniferous tree species, Scots pine and Norway spruce, substantially better. Full article

Accurate localization of buried water pipelines in rural areas is crucial for maintenance and leak management but is often hindered by outdated maps and the limitations of traditional geophysical methods. This study aimed to develop and validate a multi-source remote-sensing workflow, integrating UAV (unmanned aerial vehicle)-borne near-infrared (NIR) surveys, multi-temporal Sentinel-2 imagery, and historical Google Earth orthophotos to precisely map pipeline locations and establish a surface baseline for future monitoring. Each dataset was processed within a unified least-squares framework to delineate pipeline axes from surface anomalies (vegetation stress, soil discoloration, and proxies) and rigorously quantify positional uncertainty, with findings validated against RTK-GNSS (Real-Time Kinematic—Global Navigation Satellite System) surveys of an excavated trench. The combined approach yielded sub-meter accuracy (±0.3 m) with UAV data, meter-scale precision (≈±1 m) with Google Earth, and precision up to several meters (±13.0 m) with Sentinel-2, significantly improving upon inaccurate legacy maps (up to a 300 m divergence) and successfully guiding excavation to locate a pipeline segment. The methodology demonstrated seasonal variability in detection capabilities, with optimal UAV-based identification occurring during early-vegetation growth phases (NDVI, Normalized Difference Vegetation Index ≈ 0.30–0.45) and post-harvest periods. A Sentinel-2 analysis of 221 cloud-free scenes revealed persistent soil discoloration patterns spanning 15–30 m in width, while Google Earth historical imagery provided crucial bridging data with intermediate spatial and temporal resolution. Ground-truth validation confirmed the pipeline location within 0.4 m of the Google Earth-derived position. This integrated, cost-effective workflow provides a transferable methodology for enhanced pipeline mapping and establishes a vital baseline of surface signatures, enabling more effective future monitoring and proactive maintenance to detect leaks or structural failures. This methodology is particularly valuable for water utility companies, municipal infrastructure managers, consulting engineers specializing in buried utilities, and remote-sensing practitioners working in pipeline detection and monitoring applications. Full article

The deep learning object detection algorithm has been widely applied in the field of synthetic aperture radar (SAR). By utilizing deep convolutional neural networks (CNNs) and other techniques, these algorithms can effectively identify and locate targets in SAR images, thereby improving the accuracy and efficiency of detection. In recent years, achieving real-time monitoring of regions has become a pressing need, leading to the direct completion of real-time SAR image target detection on airborne or satellite-borne real-time processing platforms. However, current GPU-based real-time processing platforms struggle to meet the power consumption requirements of airborne or satellite applications. To address this issue, a low-power, low-latency deep learning SAR object detection algorithm accelerator was designed in this study to enable real-time target detection on airborne and satellite SAR platforms. This accelerator proposes a Process Engine (PE) suitable for multidimensional convolution parallel computing, making full use of Field-Programmable Gate Array (FPGA) computing resources to reduce convolution computing time. Furthermore, a unique memory arrangement design based on this PE aims to enhance memory read/write efficiency while applying dataflow patterns suitable for FPGA computing to the accelerator to reduce computation latency. Our experimental results demonstrate that deploying the SAR object detection algorithm based on Yolov5s on this accelerator design, mounted on a Virtex 7 690t chip, consumes only 7 watts of dynamic power, achieving the capability to detect 52.19 512 × 512-sized SAR images per second. Full article

Riverine environmental information includes important data to collect, and the data collection still requires personnel’s field surveys. These on-site tasks still face significant limitations (i.e., hard or danger to entry). In recent years, as one of the efficient approaches for data collection, air-vehicle-based Light Detection and Ranging technologies have already been applied in global environmental research, i.e., land cover classification (LCC) or environmental monitoring. For this study, the authors specifically focused on seven types of LCC (i.e., bamboo, tree, grass, bare ground, water, road, and clutter) that can be parameterized for flood simulation. A validated airborne LiDAR bathymetry system (ALB) and a UAV-borne green LiDAR System (GLS) were applied in this study for cross-platform analysis of LCC. Furthermore, LiDAR data were visualized using high-contrast color scales to improve the accuracy of land cover classification methods through image fusion techniques. If high-resolution aerial imagery is available, then it must be downscaled to match the resolution of low-resolution point clouds. Cross-platform data interchangeability was assessed by comparing the interchangeability, which measures the absolute difference in overall accuracy (OA) or macro-F1 by comparing the cross-platform interchangeability. It is noteworthy that relying solely on aerial photographs is inadequate for achieving precise labeling, particularly under limited sunlight conditions that can lead to misclassification. In such cases, LiDAR plays a crucial role in facilitating target recognition. All the approaches (i.e., low-resolution digital imagery, LiDAR-derived imagery and image fusion) present results of over 0.65 OA and of around 0.6 macro-F1. The authors found that the vegetation (bamboo, tree, grass) and road species have comparatively better performance compared with clutter and bare ground species. Given the stated conditions, differences in the species derived from different years (ALB from year 2017 and GLS from year 2020) are the main reason. Because the identification of clutter species includes all the items except for the relative species in this research, RGB-based features of the clutter species cannot be substituted easily because of the 3-year gap compared with other species. Derived from on-site reconstruction, the bare ground species also has a further color change between ALB and GLS that leads to decreased interchangeability. In the case of individual species, without considering seasons and platforms, image fusion can classify bamboo and trees with higher F1 scores compared to low-resolution digital imagery and LiDAR-derived imagery, which has especially proved the cross-platform interchangeability in the high vegetation types. In recent years, high-resolution photography (UAV), high-precision LiDAR measurement (ALB, GLS), and satellite imagery have been used. LiDAR measurement equipment is expensive, and measurement opportunities are limited. Based on this, it would be desirable if ALB and GLS could be continuously classified by Artificial Intelligence, and in this study, the authors investigated such data interchangeability. A unique and crucial aspect of this study is exploring the interchangeability of land cover classification models across different LiDAR platforms. Full article

Clouds play a key role in the Earth’s radiation budget, weather, and hydrological cycle, as well as the radiative and thermodynamic components of the climate system. Spaceborne observations are an essential tool to detect clouds, study cloud–radiation interactions, and explore their microphysical properties. Recent advancements in spatial, spectral, and temporal resolutions of satellite-borne measurements and the increasing variety of orbits and observing geometries offer the opportunity for more efficient and sophisticated retrieval procedures, leading to the more accurate estimation of cloud parameters. However, despite the availability of near-coincident observations of the same atmospheric state, the synergy between the whole set of acquired information is still largely underexplored. The use of synergy is often invoked to optimize the exploitation of the available information, but it is rarely implemented. Indeed, the strategy currently used in most cases is that retrievals are performed separately for each instrument and, only later, the retrieved products are combined. In this framework, therefore, there is a strong need to study and exploit the synergy potential of the instruments currently in orbit or that will be put in orbit in the next few years. This paper reviews the efforts already made in this direction, combining passive infrared and microwave to retrieve cloud microphysical properties. We provide readers with a framework to interpret the state of the art, highlighting the pros and cons of the various approaches currently used with a look to the most promising methodologies to be deployed to address the challenges of this field. Full article

The Global Navigation Satellite System (GNSS) has made important progress in Earth observation and applications. With the successful design of the BeiDou Navigation Satellite System (BDS), four global navigation satellite systems are available worldwide, together with Galileo, GLONASS, and GPS. These systems have been widely employed in positioning, navigation, and timing (PNT). Furthermore, GNSS refraction, reflection, and scattering signals can remotely sense the Earth’s surface and atmosphere with powerful implications for environmental remote sensing. In this paper, the recent developments and new application progress of multi-GNSS in Earth observation are presented and reviewed, including the methods of BDS/GNSS for Earth observations, GNSS navigation and positioning performance (e.g., GNSS-PPP and GNSS-NRTK), GNSS ionospheric modelling and space weather monitoring, GNSS meteorology, and GNSS-reflectometry and its applications. For instance, the static Precise Point Positioning (PPP) precision of most MGEX stations was improved by 35.1%, 18.7%, and 8.7% in the east, north, and upward directions, respectively, with PPP ambiguity resolution (AR) based on factor graph optimization. A two-layer ionospheric model was constructed using IGS station data through three-dimensional ionospheric model constraints and TEC accuracy was increased by about 20–27% with the GIM model. Ten-minute water level change with centimeter-level accuracy was estimated with ground-based multiple GNSS-R data based on a weighted iterative least-squares method. Furthermore, a cyclone and its positions were detected by utilizing the GNSS-reflectometry from the space-borne Cyclone GNSS (CYGNSS) mission. Over the years, GNSS has become a dominant technology among Earth observation with powerful applications, not only for conventional positioning, navigation and timing techniques, but also for integrated remote sensing solutions, such as monitoring typhoons, river water level changes, geological geohazard warnings, low-altitude UAV navigation, etc., due to its high performance, low cost, all time and all weather. Full article

The integration of satellite-borne and ground-based global lightning location networks offers a better perspective to study lightning processes and their evolutionary characteristics within thunderstorm clouds, thereby bolstering the predictive capabilities for severe weather phenomena. Currently, the satellite-borne network is in the preliminary testing phase with a single satellite. The geographic locations of single-satellite detection events primarily rely on synchronous information from coincident ground-based network events; this method is called synchronous locating (SCL). However, variations in detection-frequency bands and system capabilities prevent this method from accurately locating more than a mere 10% of events. To address this limitation, this paper introduces a cluster-analysis-based strategy, utilizing the observations from the Worldwide Lightning Location Network (WWLLN), termed the cluster analysis locating (CAL) method. The CAL method’s performance, influenced by the density-based spatial clustering of applications with noise (DBSCAN), the K-means, and the mean shift algorithms, is examined. Subsequently, an advanced version, mean shift denoised (MSDN)-CAL, is proposed, demonstrating marked improvements in location accuracy and reliability over the other CAL methods. The satellite-borne wideband electromagnetic pulse detector (WEMPD), orbiting at an altitude of approximately 500 km with a 97.5° inclination, captured 1061 strong electromagnetic pulses (EMPs). Among these, trans-ionospheric single pulses (TISPs) and trans-ionospheric pulse pairs (TIPPs) constituted 21.30% and 78.70%, respectively. Using the MSDN-CAL method successfully determines the geographic locations for 81.15% (861 out of 1061) of the events. This success rate represents an approximate eightfold enhancement over the SCL method. The arithmetic mean, geometric mean, and standard deviation of the two-dimensional range deviation of the locating results between the MSDN-CAL method versus the WWLLN-SCL (or the Guangdong-Hong Kong-Macao Lightning Location System (GHMLLS)-SCL) method are 51.06 (176.26) km, 16.17 (92.53) km, and 100.95 (174.79) km, respectively. Furthermore, it has been possible to estimate the occurrence altitudes for 81.92% (684 out of 835) of the TIPP events. The altitude deviations, as determined by comparing them with the GHMLLS-SCL method’s locating results, exhibit an arithmetic mean of 2.08 km, a geometric mean of 1.30 km, and a standard deviation of 2.26 km. The outcomes of this research establish a foundation for deeper investigation into the origins of various event types, their seasonal variations, and their geographical distribution patterns. Moreover, they pave the way for utilizing a single satellite to measure global surface reflectance, thus contributing valuable data for meteorological and atmospheric studies. Full article

Neural networks (NNs) have proven their ability to deal with many computer vision tasks, including image-based remote sensing such as the identification and segmentation of hyperspectral images captured by satellites. Often, NNs run on a ground system upon receiving the data from the satellite. On the one hand, this approach introduces a considerable latency due to the time needed to transmit the satellite-borne images to the ground station. On the other hand, it allows the employment of computationally intensive NNs to analyze the received data. Low-budget missions, e.g., CubeSat missions, have computation capability and power consumption requirements that may prevent the deployment of complex NNs onboard satellites. These factors represent a limitation for applications that may benefit from a low-latency response, e.g., wildfire detection, oil spill identification, etc. To address this problem, in the last few years, some missions have started adopting NN accelerators to reduce the power consumption and the inference time of NNs deployed onboard satellites. Additionally, the harsh space environment, including radiation, poses significant challenges to the reliability and longevity of onboard hardware. In this review, we will show which hardware accelerators, both from industry and academia, have been found suitable for onboard NN acceleration and the main software techniques aimed at reducing the computational requirements of NNs when addressing low-power scenarios. Full article

Satellite-borne electromagnetic pulse (EMP) detection technology plays an important role in military reconnaissance, space environment monitoring, and early warning of natural disasters. However, the complex ionosphere greatly distorts the waveform during propagation and poses a challenge to EMP detection. Therefore, it is necessary to conduct theoretical research on EMP propagation in the ionosphere. Conventional second-order pseudo-spectral time-domain (PSTD-2) algorithm has difficulties in keeping the stability and accuracy of waveforms in calculations over hundreds of kilometers of propagation. To overcome the difficulties, a fourth-order PSTD algorithm incorporating the moving window technique (MWPSTD-4) is proposed. In the numerical examples, the performance of MWPSTD-4 is compared with PSTD-4 and PSTD-2 in the long-distance propagation of EMP. The results show that the MWPSTD-4 improves efficiency while guaranteeing accuracy and is suitable for large-scale electromagnetic field simulation. The proposed method provides a basic algorithm to eliminate the numerical dispersion interference for calculating the long-distance propagation of EMP in complex spaces and is helpful for the design and calibration of satellite-borne EMP detectors. Full article

The advent of satellite-borne machine learning hardware accelerators has enabled the onboard processing of payload data using machine learning techniques such as convolutional neural networks (CNNs). A notable example is using a CNN to detect the presence of clouds in the multispectral data captured on Earth observation (EO) missions, whereby only clear sky data are downlinked to conserve bandwidth. However, prior to deployment, new missions that employ new sensors will not have enough representative datasets to train a CNN model, while a model trained solely on data from previous missions will underperform when deployed to process the data on the new missions. This underperformance stems from the domain gap, i.e., differences in the underlying distributions of the data generated by the different sensors in previous and future missions. In this paper, we address the domain gap problem in the context of onboard multispectral cloud detection. Our main contributions lie in formulating new domain adaptation tasks that are motivated by a concrete EO mission, developing a novel algorithm for bandwidth-efficient supervised domain adaptation, and demonstrating test-time adaptation algorithms on space deployable neural network accelerators. Our contributions enable minimal data transmission to be invoked (e.g., only 1% of the weights in ResNet50) to achieve domain adaptation, thereby allowing more sophisticated CNN models to be deployed and updated on satellites without being hampered by domain gap and bandwidth limitations. Full article